arXiv subjects
Publications and source records attributed to F. Chen.
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
A negative capacitance has been observed in a nano-colloid between 0.1 and 10^-5 Hz. The response is linear over a broad range of conditions. The low-omega dispersions of both the resistance and capacitance are consistent with the free-carrier plasma model, while the transient behavior demonstrates an unusual energy storage mechanism. A collective excitation, therefore, is suggested.
Magnetic nanoparticles of gamma-Fe2O3 coated by organic molecules and suspended in liquid and solid matrices, as well as a non-diluted magnetic fluid have been studied by electron magnetic resonance (EMR) at 77-380 K. Slightly asymmetric spectra observed at room temperature become much broader, symmetric, and shift to lower fields upon cooling. An additional narrow spectral component (with the line-width of 30 G) is found in the diluted samples, its magnitude obeying the Arrhenius law with the activation temperature of about 850 K. The longitudinal spin-relaxation time, T1 >> 10 ns, was determined by the specially developed modulation method. Angular dependence of the EMR signal position in field-freezing samples unambiguously points to the domination of the uniaxial magnetic anisotropy. Substantial alignment is achieved in moderate freezing fields of 4-5 kG, suggesting formation of dipolar-coupled chains consisting from several particles separated by organic nanolayers. The shift and broadening of the spectrum upon cooling are ascribed to the role of the surface layer, which is considered with taking into acount the strong surface-related anisotropy. To describe the overall spectrum shape, a quantization model is used which includes summation of the resonances corresponding to varios orientations of the particle magnetic moment. This approach, supplemented with some phenomenological assumptions, provides satisfactory agreement with the experimental data.
A measurement of the Casimir force between a gold coated sphere and two Si plates of different carrier densities is performed using a high vacuum based atomic force microscope. The results are compared with the Lifshitz theory and good agreement is found. Our experiment demonstrates that by changing the carrier density of the semiconductor plate by several orders of magnitude it is possible to modify the Casimir interaction. This result may find applications in nanotechnology.
Quasi-irreversible increase in the electrical conductivity is observed in single crystals of LaGa1-xMnxO3. The effect lasts for long time at room temperature and can be erased by heating of the crystal above the phase transition temperature. We explain the observed effects in terms of ionization and local lattice distortion processes.
The experimental investigation of the Casimir force between a large metallized sphere and semiconductor plate is performed using an atomic force microscope. Improved calibration and measurement procedures permitted reduction in the role of different uncertainties. Rigorous statistical procedures are applied for the analysis of random, systematic and total experimental errors at 95% confidence. The theoretical Casimir force is computed for semiconductor plates with different conductivity properties taking into account all theoretical uncertainties discussed in literature. The comparison between experiment and theory is done at both 95 and 70% confidence. It is demonstrated that the theoretical results computed for the semiconductor plate used in experiment are consistent with data. At the same time, theory describing a dielectric plate is excluded by experiment at 70% confidence. Thus, the Casimir force is proved to be sensitive to the conductivity properties of semiconductors.
In most experiments on the Casimir force the comparison between measurement data and theory was done using the concept of the root-mean-square deviation, a procedure that has been criticized in literature. Here we propose a special statistical analysis which should be performed separately for the experimental data and for the results of the theoretical computations. In so doing, the random, systematic, and total experimental errors are found as functions of separation, taking into account the distribution laws for each error at 95% confidence. Independently, all theoretical errors are combined to obtain the total theoretical error at the same confidence. Finally, the confidence interval for the differences between theoretical and experimental values is obtained as a function of separation. This rigorous approach is applied to two recent experiments on the Casimir effect.
The significance of a negative dielectric constant has long been recognized. We report here the observation of a field-induced large negative dielectric constant of aggregates of oxide nano-particles at frequencies below ~ 1 Hz at room temperature. The accompanying induced charge detected opposes the electric field applied in the field-induced negative dielectric constant state. A possible collective effect in the nano-particle aggregates is proposed to account for the observations. Materials with a negative dielectric constant are expected to provide an attraction between similar charges and unusual scattering to electromagnetic waves with possible profound implications for high temperature superconductivity and communications.
The measurement of the Casimir force between a large gold coated sphere and single crystal silicon plate is performed with an atomic force microscope. A rigorous statistical comparison of data with theory is done, without use of the concept of root-mean-square deviation, and excellent agreement is obtained. The Casimir force between metal and semiconductor is demonstrated to be significantly different than between two similar or dissimilar metals.
We report a simple and easily controllable method where a nano-undulated surface morphology of Nd1/3Eu1/3Gd1/3Ba2Cu3Ox (NEG) films leads to a substantial increase in the critical current density in superconducting YBa2Cu3Ox (YBCO) films deposited by pulsed laser deposition on such NEG layers. The enhancement is observed over a wide range of fields and temperatures. Transmission electron microscopy shows that such YBCO films possess a high density of localized areas, typically 20 x 20 nm2 in size, where distortion of atomic planes give rotational (2 to 5 degrees) moire patterns. Their distribution is random and uniform, and expected to be the origin of the enhanced flux pinning. Magneto-optical imaging shows that these films have excellent macroscopic magnetic uniformity.
We compare theory and experiment in the Casimir force measurement between gold surfaces performed with the atomic force microscope. Both random and systematic experimental errors are found leading to a total absolute error equal to 8.5 pN at 95% confidence. In terms of the relative errors, experimental precision of 1.75% is obtained at the shortest separation of 62 nm at 95% confidence level (at 60% confidence the experimental precision of 1% is confirmed at the shortest separation). An independent determination of the accuracy of the theoretical calculations of the Casimir force and its application to the experimental configuration is carefully made. Special attention is paid to the sample-dependent variations of the optical tabulated data due to the presence of grains, contribution of surface plasmons, and errors introduced by the use of the proximity force theorem. Nonmultiplicative and diffraction-type contributions to the surface roughness corrections are examined. The electric forces due to patch potentials resulting from the polycrystalline nature of the gold films are estimated. The finite size and thermal effects are found to be negligible. The theoretical accuracy of about 1.69% and 1.1% are found at a separation 62 nm and 200 nm, respectively. Within the limits of experimental and theoretical errors very good agreement between experiment and theory is confirmed characterized by the root mean square deviation of about 3.5 pN within all measurement range. The conclusion is made that the Casimir force is stable relative to variations of the sample-dependent optical and electric properties, which opens new opportunities to use the Casimir effect for diagnostic purposes.
The competition of superconductivity and magnetism in superlattices composed of alternating YBa$_2$Cu$_3$O$_{7-d}$ and La$_{0.67}$Ca$_{0.33}$MnO$_{3}$ thin films is investigated using low-energy optical spectroscopy. The thickness of the superconducting YBCO layers is varied from 30 nm to 20 nm while the thickness of the magnetic LCMO layers is kept constant at 20 nm. We clearly observe that the superconducting condensate density in the superconducting state of superlattice is drastically reduced by the magnetic subsystem which may be connected with proximity effects that distort the gap symmetry and thus suppress superconductivity.
The macroscopic magnetizations of Ru_1-xCu_xSr_2EuCu_2O_8+d with x between 0 and 0.15 were investigated. A ferromagnet-like transition as well as an antiferromagnet-like transition appear around T_M in the low-field magnetization and around T_AM in the high-field differential susceptibility, respectively. The separation between them, which is accompanied by a flat plateau in the magnetic C_p, increases with x. Superparamagnetic M(H) and slow spin dynamics, i.e. characteristics of nanomagnetic clusters, were observed far above T_M. A comparison with RuSr_2(Eu_1-yCe_y)Cu_2O_10+d and some manganites further suggests that a phase separation occurs, which can describe well the conflicting magnetic-superconductivity data previously reported.
The difference of the thermal Casimir forces at different temperatures between real metals is shown to increase with a decrease of the separation distance. This opens new opportunities for the demonstration of the thermal dependence of the Casimir force. Both configurations of two parallel plates and a sphere above a plate are considered. Different approaches to the theoretical description of the thermal Casimir force are shown to lead to different measurable predictions.
The lateral Casimir force acting between a sinusoidally corrugated gold plate and sphere was calculated and measured. The experimental setup was based on the atomic force microscope specially adapted for the measurement of the lateral Casimir force. The measured force oscillates sinusoidally as a function of the phase difference between the two corrugations. Both systematic and random errors are analysed and a lateral force amplitude of $3.2\times 10^{-13} $N was measured at a separation distance of 221 nm with a resulting relative error 24% at a 95% confidence probability. The dependence of the measured lateral force amplitude on separation was investigated and shown to be consistent with the inverse fourth power distance dependence. The complete theory of the lateral Casimir force is presented including finite conductivity and roughness corrections. The obtained theoretical dependence was analysed as a function of surface separation, corrugation amplitudes, phase difference, and plasma wavelength of a metal. The theory was compared with the experimental data and shown to be in good agreement. The constraints on hypothetical Yukawa-type interactions following from the measurements of the lateral Casimir force are calculated. The possible applications of the lateral vacuum forces to nanotechnology are discussed.
The lateral Casimir force between a sinusoidally corrugated gold coated plate and large sphere was measured for surface separations between 0.2 $μ$m to 0.3 $μ$m using an atomic force microscope. The measured force shows the required periodicity corresponding to the corrugations. It also exhibits the necessary inverse fourth power distance dependence. The obtained results are shown to be in good agreement with a complete theory taking into account the imperfectness of the boundary metal. This demonstration opens new opportunities for the use of the Casimir effect for lateral translation in microelectromechanical systems.
We report an improved precision measurement of the Casimir force using metallic gold surfaces. The force is measured between a large gold coated sphere and flat plate using an Atomic Force Microscope. The use of gold surfaces removes some theoretical uncertainties in the interpretation of the measurement. The forces are also measured at smaller surface separations. The complete dielectric spectrum of the metal is used in the comparison of theory to the experiment. The average statistical precision remains at the same 1% of the forces measured at the closest separation. These results should lead to the development of stronger constraints on hypothetical forces.