arXiv subjects

F. Giubileo

Publications and source records attributed to F. Giubileo.

At least 19 recordsLinked to original sources

arXiv2023

Gas dependent hysteresis in MoS$_2$ field effect transistors

We study the effect of electric stress, gas pressure and gas type on the hysteresis in the transfer characteristics of monolayer molybdenum disulfide (MoS2) field effect transistors. The presence of defects and point vacancies in the MoS2 crystal structure facilitates the adsorption of oxygen, nitrogen, hydrogen or methane, which strongly affect the transistor electrical characteristics. Although the gas adsorption does not modify the conduction type, we demonstrate a correlation between hysteresis width and adsorption energy onto the MoS2 surface. We show that hysteresis is controllable by pressure and/or gas type. Hysteresis features two well-separated current levels, especially when gases are stably adsorbed on the channel, which can be exploited in memory devices.

cond-mat.mes-hall↗

arXiv2020

Vacuum gauge from ultrathin MoS2 transistor

We fabricate monolayer MoS2 field effect transistors and study their electric characteristics from 10^-6 Torr to atmospheric air pressure. We show that the threshold voltage of the transistor increases with the growing pressure. Hence, we propose the device as an air pressure sensor, showing that it is particularly suitable as a low power consumption vacuum gauge. The device functions on pressure-dependent O2, N2 and H2O molecule adsorption that affect the n-doping of the MoS2 channel.

physics.app-ph↗

arXiv2020

Electron irradiation of metal contacts in monolayer MoS$_2$ Field-Effect Transistors

This work deals with the electron beam irradiation of the Schottky metal contacts in monolayer molybdenum disulfide (MoS$_2$) field-effect transistors (FETs). We show that the exposure of the Ti/Au source/drain leads to an electron beam improves the transistor conductance. We simulate the path of the electrons in the device and show that most of the beam energy is absorbed in the metal contacts. Hence, we propose that the transistor current enhancement is due to thermally induced interfacial reactions that lower the contact Schottky barriers. We also show that the electron beam conditioning of contacts is permanent, while the irradiation of the channel can produce transient effects.

physics.app-ph↗

arXiv2020

Electron irradiation on multilayer PdSe$_2$ field effect transistors

Palladium diselenide (PdSe2) is a recently isolated layered material that has attracted a lot of interest for the pentagonal structure, the air stability and the electrical properties largely tunable by the number of layers. In this work, PdSe2 is used in the form of multilayer as the channel of back-gate field-effect transistors, which are studied under repeated electron irradiations. Source-drain Pd leads enable contacts with resistance below 350 kOhm um. The transistors exhibit a prevailing n-type conduction in high vacuum, which reversibly turns into ambipolar electric transport at atmospheric pressure. Irradiation by 10 keV electrons suppresses the channel conductance and promptly transforms the device from n-type to p-type. An electron fluence as low as 160 e-/nm2 dramatically change the transistor behavior demonstrating a high sensitivity of PdSe2 to electron irradiation. The sensitivity is lost after few exposures, that is a saturation condition is reached for fluence higher than 4000 e-/nm2. The damage induced by high electron fluence is irreversible as the device persist in the radiation-modified state for several hours, if kept in vacuum and at room temperature. With the support of numerical simulation, we explain such a behavior by electron-induced Se atom vacancy formation and charge trapping in slow trap states at the Si/SiO_2 interface.

physics.app-ph↗

arXiv2020

Field emission in ultrathin PdSe2 back-gated transistors

We study the electrical transport in back-gate field-effect transistors with ultrathin palladium diselenide (PdSe2) channel. The devices are normally-on and exhibit dominant n-type conduction at low pressure. The electron conduction, combined with the sharp edge and the workfunction decreasing with the number of layers, opens the way to applications of PdSe2 nanosheets in vacuum electronics. In this work, we demonstrate field emission from few-layer PdSe2 nanosheets with current up to the uA and turn-on field below 100 V/um, thus extending the plethora of applications of this recently isolated pentagonal layered material.

physics.app-ph↗

arXiv2017

Graphene enhanced field emission from InP nanocrystals

We report the observation of field emission from InP nanocrystals epitaxially grown on an array of p-Si nanotips. We prove that field emission can be enhanced by covering the InP nanocrystals with graphene. The measurements are performed inside a scanning electron microscope chamber with a nano-controlled W-thread used as an anode. We analyze the field emission by Fowler-Nordheim theory and find that the field enhancement factor increases monotonically with the spacing between the anode and the cathode. We also show that InP/p-Si junction has a rectifying behavior, while graphene on InP creates an ohmic contact. Understanding the fundamentals of such nanojunctions is key for applications in nanoelectronics.

cond-mat.mes-hall↗

arXiv2017

Transport and field emission properties of buckypapers obtained from aligned carbon nanotubes

We produce 120 um thick buckypapers from aligned carbon nanotubes. Transport characteristics evidence ohmic behavior in a wide temperature range, non linearity appearing in the current-voltage curves only close to 4.2 K. The temperature dependence of the conductance shows that transport is mostly due to thermal fluctuation induced tunneling, although to explain the whole temperature range from 4.2 K to 430 K a further linear contribution is necessary. The field emission properties are measured by means of a nanocontrolled metallic tip acting as collector electrode to access local information about buckypaper properties from areas as small as 1 um2. Emitted current up to 10-5A and turn-on field of about 140V/um are recorded. Long operation, stability and robustness of emitters have been probed by field emission intensity monitoring for more than 12 hours at pressure of 10-6 mbar. Finally, no tuning of the emitted current was observed for in plane applied currents in the buckypaper.

cond-mat.mes-hall↗

arXiv2016

Low-energy electron-irradiation effect on transport properties of graphene field effect transistor

We study the effects of low-energy electron beam irradiation up to 10 keV on graphene based field effect transistors. We fabricate metallic bilayer electrodes to contact mono- and bi-layer graphene flakes on SiO$_2$, obtaining specific contact resistivity $ρ_c \simeq 19 kΩμm^2$ and carrier mobility as high as 4000 cm$^2$V$^{-1}$s$^{-1}$. By using a highly doped p-Si/SiO$_2$ substrate as back gate, we analyze the transport properties of the device and the dependence on the pressure and on the electron bombardment. We demonstrate that low energy irradiation is detrimental on the transistor current capability, resulting in an increase of the contact resistance and a reduction of the carrier mobility even at electron doses as low as 30 $e^-/nm^2$. We also show that the irradiated devices recover by returning to their pristine state after few repeated electrical measurements.

cond-mat.mes-hall↗

arXiv2015

Generalization of Blonder-Tinkham-Klapwijk theory to particle-hole mixing boundary conditions: π-shift and conductance dips

We generalize the Blonder-Tinkham-Klapwijk theory considering non-diagonal boundary conditions in the Bogoliubov-de Gennes scattering problem, to describe anomalous conductance features often reported for normal-metal/superconductor contacts. We calculate the differential conductance spectra showing that conductance dips, not expected in the standard formulation, are explained in terms of phase π-shift, between the bulk and the interface order parameter, possibly induced by a localized magnetic moment. A discretized model is used to give quantitative evaluation of the physical conditions, namely the polarization and transparency of the interface, needed to realize the phase gradient.

cond-mat.supr-con↗

arXiv2012

Effect of back-gate on contact resistance and on channel conductance in graphene-based field-effect transistors

We study the contact resistance and the transfer characteristics of back-gated field effect transistors of mono- and bi-layer graphene. We measure specific contact resistivity of ~7kohm*um2 and ~30kohm*um2 for Ni and Ti, respectively. We show that the contact resistance is a significant contributor to the total source-to-drain resistance and it is modulated by the back-gate voltage. We measure transfer characteristics showing double dip feature that we explain as the effect of doping due to charge transfer from the contacts causing minimum density of states for graphene under the contacts and in the channel at different gate voltage.

cond-mat.mes-hall↗

arXiv2011

Field emission from single and few-layer graphene flakes

We report the observation and characterization of field emission current from individual single- and few-layer graphene flakes laid on a flat SiO2/Si substrate. Measurements were performed in a scanning electron microscope chamber equipped with nanoprobes, used as electrodes to realize local measurements of the field emission current. We achieved field emission currents up to 1 μA from the flat part of graphene flakes at applied fields of few hundred V/μm. We found that emission process is stable over a period of several hours and that it is well described by a Fowler-Nordheim model for currents over 5 orders of magnitude.

cond-mat.mes-hall↗

arXiv2011

Field emission properties of as-grown multiwalled carbon nanotube films

Multiwalled carbon nanotubes have been produced by ethylene catalytic chemical vapor deposition and used to fabricate thick and dense freestanding films ("buckypapers") by membrane filtering. Field emission properties of buckypapers have been locally studied by means of high vacuum atomic force microscopy with a standard metallic cantilever used as anode to collect electrons emitted from the sample. Buckypapers showed an interesting linear dependence in the Fowler-Nordheim plots demonstrating their suitability as emitters. By precisely tuning the tip-sample distance in the submicron region we found out that the field enhancement factor is not affected by distance variations up to 2um. Finally, the study of current stability showed that the field emission current with intensity of about 3,3*10-5A remains remarkably stable (within 5% fluctuations) for several hours.

cond-mat.mes-hall↗

arXiv2008

Field emission from single multi-wall carbon nanotubes

Electron field emission characteristics of individual multiwalled carbon nanotubes have been investigated by a piezoelectric nanomanipulation system operating inside a scanning electron microscopy chamber. The experimental setup ensures a high control capability on the geometric parameters of the field emission system (CNT length, diameter and anode-cathode distance). For several multiwalled carbon nanotubes, reproducible and quite stable emission current behaviour has been obtained with a dependence on the applied voltage well described by a series resistance modified Fowler-Nordheim model. A turn-on field of about 30 V/um and a field enhancement factor of around 100 at a cathode-anode distance of the order of 1 um have been evaluated. Finally, the effect of selective electron beam irradiation on the nanotube field emission capabilities has been extensively investigated.

cond-mat.mtrl-sci↗

arXiv2008

Local probing of the field emission stability of vertically aligned multiwalled carbon nanotubes

Metallic cantilever in high vacuum atomic force microscope has been used as anode for field emission experiments from densely packed vertically aligned multi-walled carbon nanotubes. The high spatial resolution provided by the scanning probe technique allowed precise setting of the tip-sample distance in the submicron region. The dimension of the probe (curvature radius below 50nm) allowed to measure current contribution from sample areas smaller than 1um^2. The study of long-term stability evidenced that on these small areas the field emission current remains stable (within 10% fluctuations) several hours (at least up to 72 hours) at current intensities between 10-5A and 10-8A. Improvement of the current stability has been observed after performing long-time Joule heating conditioning to completely remove possible adsorbates on the nanotubes.

cond-mat.mtrl-sci↗

arXiv2007

Evidence of s-Wave Subdominant Order Parameter in YBCO from Break Junction Tunneling Spectra

The tunneling spectra of YBa2Cu3O7 break-junctions have been investigated for the tunneling direction close to the node one. The zero-bias conductance peak (ZBCP) and Josephson current have been studied with temperature and magnetic field. The observed deep splitting of ZBCP which starts at Ts<20-30K is in agreement with the theory for the dx2-y2+-is order parameter [Y. Tanuma, Y. Tanaka, and S. Kashiwaya, Phys. Rev. B 64, 214519 (2001)]. The low (0.04T) magnetic field depresses significantly such splitting. The 1/T temperature dependence of maximum Josephson current goes to saturation at T<Ts also confirming the mixed order parameter formation.

cond-mat.supr-con↗

arXiv2007

A local field emission study of partially aligned carbon-nanotubes by AFM probe

We report on the application of Atomic Force Microscopy (AFM) for studying the Field Emission (FE) properties of a dense array of long and vertically quasi-aligned multi-walled carbon nanotubes grown by catalytic Chemical Vapor Deposition on a silicon substrate. The use of nanometric probes enables local field emission measurements allowing investigation of effects non detectable with a conventional parallel plate setup, where the emission current is averaged on a large sample area. The micrometric inter-electrode distance let achieve high electric fields with a modest voltage source. Those features allowed us to characterize field emission for macroscopic electric fields up to 250 V/$μ$m and attain current densities larger than 10$^5$ A/cm$^2$. FE behaviour is analyzed in the framework of the Fowler-Nordheim theory. A field enhancement factor $γ\approx$ 40-50 and a turn-on field $E_{turn-on} \sim$15 V/$μ$m at an inter-electrode distance of 1 $μ$m are estimated. Current saturation observed at high voltages in the I-V characteristics is explained in terms of a series resistance of the order of M$Ω$. Additional effects as electrical conditioning, CNT degradation, response to laser irradiation and time stability are investigated and discussed.

cond-mat.mtrl-sci↗

arXiv2006

Local Tunneling Study of Three-Dimensional Order Parameter in the $π$-band of Al-doped MgB$_2$ Single Crystals

We have performed local tunneling spectroscopy on high quality Mg$_{1-x}$Al$_x$B$_2$ single crystals by means of Variable Temperature Scanning Tunneling Spectroscopy (STS) in magnetic field up to 3 Tesla. Single gap conductance spectra due to c-axis tunneling were extensively measured, probing different amplitudes of the three-dimensional $Δ_π$ as a function of Al content. Temperature and magnetic field dependences of the conductance spectra were studied in S-I-N configuration: the effect of the doping resulted in a monotonous reduction of the locally measured $T_C$ down to 24K for x=0.2. On the other hand, we have found that the gap amplitude shows a maximum value $Δ_π= 2.3$ meV for x=0.1, while the $Δ_π/ T_C$ ratio increases monotonously with doping. The locally measured upper critical field was found to be strongly related to the gap amplitude, showing the maximum value $H_{c2}\simeq3T$ for x=0.1 substituted samples. For this Al concentration the data revealed some spatial inhomogeneity in the distribution of $Δ_π$ on nanometer scale.

cond-mat.supr-con↗

arXiv2005

Superconducting vortex profile from fixed point measurements The Lazy Fisherman tunnelling microscopy method

We introduce a mode of operation for studying the vortex phase in superconductors using scanning tunnelling microscopy (STM). While in the conventional STM method, the tip is scanned over a sample in which a fixed vortex pattern is prepared, in our "Lazy Fisherman" method the STM tip is kept fixed at a selected location while the vortices are being moved by varying the applied magnetic field. By continuously acquiring the local tunnelling conductance spectra, dI/dV(V), we detect the changes in the local density of states under the tip due to the vortex motion. With no need for scanning, the method permits one to extend the study of vortices to samples in which scanning is difficult or even impossible due to surface nonuniformity and allows one to study vortex dynamics. Using a statistical analysis of the spectra, we reconstruct the single vortex zero bias conductance profile. We apply the method to the c-axis face of an MgB$_2$ single crystal sample and obtain a vortex profile with a coherence length, xi of 57+-2 nm.

cond-mat.supr-con↗