arXiv subjects

Federico Capasso

Publications and source records attributed to Federico Capasso.

At least 73 records · Page 4Linked to original sources

arXiv2019

Semiconductor ring laser frequency combs induced by phase turbulence

Semiconductor ring lasers are miniaturized devices that operate on clockwise and counterclockwise modes. These modes are not coupled in the absence of intracavity reflectors, which prevents the formation of a standing wave in the cavity and, consequently, of a population inversion grating. This should inhibit the onset of multimode emission driven by spatial hole burning. Here we show that, despite this notion, ring quantum cascade lasers inherently operate in phase-locked multimode states, that switch on and off as the pumping level is progressively increased. By rewriting the master equation of lasers with fast gain media in the form of the complex Ginzburg-Landau equation, we show that ring frequency combs stem from a phase instability---a phenomenon also known in superconductors and Bose-Einstein condensates. The instability is due to coupling of the amplitude and phase modulation of the optical field in a semiconductor laser, which plays the role of a Kerr nonlinearity, highlighting a connection between laser and microresonator frequency combs.

physics.optics↗

arXiv2019

In-phase and anti-phase synchronization in a laser frequency comb

Coupled clocks are a classic example of a synchronization system leading to periodic collective oscillations. This phenomenon already attracted the attention of Christian Huygens back in 1665,who described it as a kind of "sympathy" among oscillators. In this work we describe the formation of two types of laser frequency combs as a system of oscillators coupled through the beating of the lasing modes. We experimentally show two completely different types of synchronizations in a quantum dot laser { in-phase and splay states. Both states can be generated in the same device, just by varying the damping losses of the system. This effectively modifes the coupling among the oscillators. The temporal output of the laser is characterized using both linear and quadratic autocorrelation techniques. Our results show that both pulses and frequency-modulated states can be generated on demand. These findings allow to connect laser frequency combs produced by amplitude-modulated and frequency-modulated lasers, and link these to pattern formation in coupled systems such as Josephson-junction arrays.

physics.optics↗

arXiv2019

Polariton Nanophotonics using Phase Change Materials

Polaritons formed by the coupling of light and material excitations such as plasmons, phonons, or excitons enable light-matter interactions at the nanoscale beyond what is currently possible with conventional optics. Recently, significant interest has been attracted by polaritons in van der Waals materials, which could lead to applications in sensing, integrated photonic circuits and detectors. However, novel techniques are required to control the propagation of polaritons at the nanoscale and to implement the first practical devices. Here we report the experimental realization of polariton refractive and meta-optics in the mid-infrared by exploiting the properties of low-loss phonon polaritons in isotopically pure hexagonal boron nitride (hBN), which allow it to interact with the surrounding dielectric environment comprising the low-loss phase change material, Ge$_3$Sb$_2$Te$_6$ (GST). We demonstrate waveguides which confine polaritons in a 1D geometry, and refractive optical elements such as lenses and prisms for phonon polaritons in hBN, which we characterize using scanning near field optical microscopy. Furthermore, we demonstrate metalenses, which allow for polariton wavefront engineering and sub-wavelength focusing. Our method, due to its sub-diffraction and planar nature, will enable the realization of programmable miniaturized integrated optoelectronic devices, and will lay the foundation for on-demand biosensors.

physics.app-ph↗

arXiv2019

Laser radio transmitter

Since the days of Hertz, radio transmitters have evolved from rudimentary circuits emitting around 50 MHz to modern ubiquitous Wi-Fi devices operating at gigahertz radio bands. As wireless data traffic continues to increase there is a need for new communication technologies capable of high-frequency operation for high-speed data transfer. Here we give a proof of concept of a new compact radio frequency transmitter based on a semiconductor laser frequency comb. In this laser, the beating among the coherent modes oscillating inside the cavity generates a radio frequency current, which couples to the electrodes of the device. We show that redesigning the top contact of the laser allows one to exploit the internal oscillatory current to drive an integrated dipole antenna, which radiates into free space. In addition, direct modulation of the laser current permits encoding a signal in the radiated radio frequency carrier. Working in the opposite direction, the antenna can receive an external radio frequency signal, couple it to the active region and injection lock the laser. These results pave the way to new applications and functionality in optical frequency combs, such as wireless radio communication and wireless synchronization to a reference source.

physics.app-ph↗

arXiv2018

Inverse design of large-area metasurfaces

We present a computational framework for efficient optimization-based "inverse design" of large-area "metasurfaces" (subwavelength-patterned surfaces) for applications such as multi-wavelength and multi-angle optimizations, and demultiplexers. To optimize surfaces that can be thousands of wavelengths in diameter, with thousands (or millions) of parameters, the key is a fast approximate solver for the scattered field. We employ a "locally periodic" approximation in which the scattering problem is approximated by a composition of periodic scattering problems from each unit cell of the surface, and validate it against brute-force Maxwell solutions. This is an extension of ideas in previous metasurface designs, but with greatly increased flexibility, e.g. to automatically balance tradeoffs between multiple frequencies, or to optimize a photonic device given only partial information about the desired field. Our approach even extends beyond the metasurface regime to non-subwavelength structures where additional diffracted orders must be included (but the period is not large enough to apply scalar diffraction theory).

physics.optics↗

arXiv2018

A broadband achromatic polarization-insensitive metalens consisting of anisotropic nanostructures

Metasurfaces have attracted widespread attention due to an increasing demand of compact and wearable optical devices. For many applications, polarization-insensitive metasurfaces are highly desirable and appear to limit the choice of their constituent elements to isotropic nanostructures. This greatly restricts the degrees of geometric parameters available in designing each nanostructure. Here, we demonstrate a polarization-insensitive metalens using otherwise anisotropic nanofins which offer additional control over the dispersion and phase of the output light. As a result, we can render a metalens achromatic and polarization-insensitive across nearly the entire visible spectrum from wavelength 460 nm to 700 nm, while maintaining diffraction-limited performance. The metalens is comprised of just a single layer of TiO2 nanofins and has a numerical aperture of 0.2 with a diameter of 26.4 um. The generality of our polarization-insensitive design allows it to be implemented in a plethora of other metasurface devices with applications ranging from imaging to virtual/augmented reality.

physics.optics↗

arXiv2018

Engineering Phonon Polaritons in van der Waals Heterostructures to Enhance In-Plane Optical Anisotropy

Van der Waals heterostructures assembled from layers of 2D materials have attracted considerable interest due to their novel optical and electrical properties. Here we report a scattering-type scanning near field optical microscopy study of hexagonal boron nitride on black phosphorous (h-BN/BP) heterostructures, demonstrating the first direct observation of in-plane anisotropic phonon polariton modes in vdW heterostructures. Strikingly, the measured in-plane optical anisotropy along armchair and zigzag crystal axes exceeds the ratio of refractive indices of BP in the x-y plane. We explain that this enhancement is due to the high confinement of the phonon polaritons in h-BN. We observe a maximum in-plane optical anisotropy of α_max=1.25 in the 1405-1440 cm-1 frequency spectrum. These results provide new insights on the behavior of polaritons in vdW heterostructures, and the observed anisotropy enhancement paves the way to novel nanophotonic devices and to a new way to characterize optical anisotropy in thin films.

physics.optics↗

arXiv2018

Solid-Immersion Metalenses for Infrared Focal Plane Arrays

Novel optical components based on metasurfaces (metalenses) offer a new methodology for microlens arrays. In particular, metalens arrays have the potential of being monolithically integrated with infrared focal plane arrays (IR FPAs) to increase the operating temperature and sensitivity of the latter. In this work, we demonstrate a new type of transmissive metalens that focuses the incident light (λ = 3-5 μm) on the detector plane after propagating through the substrate, i.e. solid-immersion type of focusing. The metalens is fabricated by etching the backside of the detector substrate material (GaSb here) making this approach compatible with the architecture of back-illuminated FPAs. In addition, our designs work for all incident polarizations. We fabricate a 10x10 metalens array that proves the scalability of this approach for FPAs. In the future, these solid-immersion metalenses arrays will be monolithically integrated with IR FPAs.

physics.optics↗

arXiv2018

Anisotropic Surface Plasmon Polariton Generation Using Bimodal V-Antenna Based Metastructures

V-shaped nanoantennas are among the popular choices for the unit element of a metasurface, a nanostructured surface used for its ability to mold and control the wavefront of light. In general, the motivation for choosing the V-antenna as the unit element comes from its bimodal nature, where the introduction of the second mode offers extra control over the scattered wavefronts. Here, through near-field scanning optical microscopy, we study a 1D metastructure comprised of V-antennas in the context of generating asymmetric surface plasmon polariton (SPP) wavefronts. The key point is that the use of the V-antenna allows for the creation of a two-dimensional phase gradient with a single line of antennas, where the extra phase dimension offers additional control and allows for asymmetric features. Two different asymmetries are created: (1) SPP wavefronts that have different propagation directions on either side of the metastructure, and (2) SPP wavefront asymmetry through focusing: one side of the metastructure focuses SPP wavefronts, while the other side has diverging SPP wavefronts.

physics.optics↗

arXiv2018

In-water chemical sensing by fiber-optic evanescent waves spectroscopy using mid-infrared quantum cascade lasers

The ability of detecting harmful chemicals is an important safety requirement for drinking water systems. An apparatus for in-water chemical sensing based on the absorption of evanescent waves generated by a quantum cascade laser array propagating in a silver halide optical fiber immersed into water is demonstrated. We present a theoretical analysis of the sensitivity of the system and experimentally characterize its real-time response and spectroscopic detection for injection of a sample chemical (ethanol) in a tube containing water.

physics.app-ph↗

arXiv2018

Watt-level widely tunable single-mode emission by injection-locking of a multimode Fabry-Perot quantum cascade laser

Free-running Fabry-Perot lasers normally operate in a single-mode regime until the pumping current is increased beyond the single-mode instability threshold, above which they evolve into a multimode state. As a result of this instability, the single-mode operation of these lasers is typically constrained to few percents of their output power range, this being an undesired limitation in spectroscopy applications. In order to expand the span of single-mode operation, we use an optical injection seed generated by an external-cavity single-mode laser source to force the Fabry-Perot quantum cascade laser into a single-mode state in the high current range, where it would otherwise operate in a multimode regime. Utilizing this approach we achieve single-mode emission at room temperature with a tuning range of $36 \, \mathrm{cm}^-1$ and stable continuous-wave output power exceeding 1 W. Far-field measurements show that a single transverse mode is emitted up to the highest optical power indicating that the beam properties of the seeded Fabry-Perot laser remain unchanged as compared to free-running operation.

physics.optics↗

arXiv2018

Radiative thermal runaway due to negative differential thermal emission across a solid-solid phase transition

Thermal runaway occurs when a rise in system temperature results in heat generation rates exceeding dissipation rates. Here we demonstrate that thermal runaway occurs in thermal radiative systems, given a sufficient level of negative differential thermal emission. By exploiting the insulator-to-metal phase transition of vanadium dioxide, we show that a small increase in heat generation (e.g., 10 nW/mm2) can result in a large change in surface temperature (e.g., ~35 K), as the thermal emitter switches from high emissivity to low emissivity. While thermal runaway is typically associated with catastrophic failure mechanisms, detailed understanding and control of this phenomenon may give rise to new opportunities in infrared sensing, camouflage, and rectification.

physics.app-ph↗

arXiv2017

Dynamic metasurface lens based on MEMS Technology

In the recent years, metasurfaces, being flat and lightweight, have been designed to replace bulky optical components with various functions. We demonstrate a monolithic Micro-Electro-Mechanical System (MEMS) integrated with a metasurface-based flat lens that focuses light in the mid-infrared spectrum. A two-dimensional scanning MEMS platform controls the angle of the lens along the two orthogonal axes (tip-tilt) by +-9 degrees, thus enabling dynamic beam steering. The device can compensate for off-axis incident light and thus correct for aberrations such as coma. We show that for low angular displacements, the integrated lens-on-MEMS system does not affect the mechanical performance of the MEMS actuators and preserves the focused beam profile as well as the measured full width at half maximum. We envision a new class of flat optical devices with active control provided by the combination of metasurfaces and MEMS for a wide range of applications, such as miniaturized MEMS-based microscope systems, LIDAR scanners, and projection systems.

physics.app-ph↗

arXiv2017

Mid infrared two-photon absorption in a room-temperature extended-wavelength InGaAs photodetector

We investigate the nonlinear optical response of a commercial extended-wavelength In$_{0.81}$Ga$_{0.19}$As photodetector. Degenerate two-photon absorption in the mid-infrared range is observed at room temperature using a quantum cascade laser emitting at $λ=4.5~μ$m as the excitation source. From the measured two-photon photocurrent signal we extract a two-photon absorption coefficient $β^{(2)} = 0.6 \pm 0.2$ cm/MW, in agreement with the theoretical value obtained from the $E_g^{-3}$ scaling law. Considering the wide spectral range covered by extended-wavelength In$_x$Ga$_{1-x}$As alloys, this result holds promise for new applications based on two-photon absorption for this family of materials at wavelengths between 1.8 and 5.6 $μ$m.

physics.optics↗

arXiv2017

Phase and dispersion engineering of metalenses: broadband achromatic focusing and imaging in the visible

Metasurfaces have the potential to miniaturize and improve the performance of any optical element, with applications spanning telecommunications, computing and wearable optics. However, the ability to retain functionality over a continuous, broad range of wavelengths is essential for their widespread adoption. So far, efforts to achieve this have been limited to either a reflection configuration or operation at wavelengths other than the visible. Here, we show that by judicious choice of nanostructures, one can independently control both the phase and group delay, leading to broadband transmissive achromatic metalenses and metalenses with tunable dispersion across the visible spectrum. We demonstrate diffraction-limited broadband focusing and achromatic imaging using metalenses across wavelengths from 470 nm to 670 nm, with focal length change of a few percent across this 200 nm bandwidth. This approach requires only a single layer metasurface whose thickness is on the wavelength scale, and does not involve spatial multiplexing or cascading.

physics.optics↗

arXiv2017

Large Area Metalenses: Design, Characterization, and Mass Manufacturing

Optical components, such as lenses, have traditionally been made in the bulk form by shaping glass or other transparent materials. Recent advances in metasurfaces provide a new basis for recasting optical components into thin, planar elements, having similar or better performance using arrays of subwavelength-spaced optical phase-shifters. The technology required to mass produce them dates back to the mid-1990s, when the feature sizes of semiconductor manufacturing became considerably denser than the wavelength of light, advancing in stride with Moore's law. This provides the possibility of unifying two industries: semiconductor manufacturing and lens-making, whereby the same technology used to make computer chips is used to make optical components, such as lenses, based on metasurfaces. Using a scalable metasurface layout compression algorithm that exponentially reduces design file sizes (by 3 orders of magnitude for a centimeter diameter lens) and stepper photolithography, we show the design and fabrication of metasurface lenses (metalenses) with extremely large areas, up to centimeters in diameter and beyond. Using a single two-centimeter diameter near-infrared metalens less than a micron thick fabricated in this way, we experimentally implement the ideal thin lens equation, while demonstrating high-quality imaging and diffraction-limited focusing.

physics.optics↗

arXiv2017

Selective excitation and imaging of ultraslow phonon polaritons in thin hexagonal boron nitride crystals

Polaritons in 2D and van der Waals (vdW) materials have been investigated in several recent works as an innovative platform for light-matter interaction, rich of new physical phenomena.Hexagonal Boron Nitride (h-BN), in particular, is an out of plane anisotropic material (while it is in-plane isotropic) with two very strong phonon polaritons bands where the permittivity becomes negative. In the first restrahlen band (RS1, 780-830 cm-1) the relative out of plane permittivity is negative, while in the second restrahlen band (RS2, 1370-1610 cm-1) the relative in-plane permittivity is negative. Due to these optical properties, thin h-BN flakes support guided modes which have been observed experimentally both via far field and near field methods. In this work, we show how selectively excite the more confined modes in the RS1 and RS2 bands. The supported guided modes have phase and group velocities respectively tens and hundreds of times slower than the speed of light. We also show the possibility of full hyperspectral nano-imaging of modes in RS1 band by means of photo-induced force microscopy (PiFM). Moreover, a direct comparison of (PiFM) and scattering-type near-field microscopy (s-SNOM) is obtained by imaging the modes of the RS2 band with both techniques implemented on the same platform. The possibility of addressing ultraslow (ultraconfined) polaritonic modes of h-BN crystal flakes together with the possibility of optical nano-imaging in both the restrahlen bands have many innovative aspects that can lead to unprecedented schemes for strong light-matter interaction, slow and confined light.

physics.app-ph↗

arXiv2017

Single-mode instability in standing-wave lasers: The quantum cascade laser as a self-pumped parametric oscillator

We report the observation of a clear single-mode instability threshold in continuous-wave Fabry-Perot quantum cascade lasers (QCLs). The instability is characterized by the appearance of sidebands separated by tens of free spectral ranges (FSR) from the first lasing mode, at a pump current not much higher than the lasing threshold. As the current is increased, higher-order sidebands appear that preserve the initial spacing, and the spectra are suggestive of harmonically phase-locked waveforms. We present a theory of the instability that applies to all homogeneously broadened standing-wave lasers. The low instability threshold and the large sideband spacing can be explained by the combination of an unclamped, incoherent Lorentzian gain due to the population grating, and a coherent parametric gain caused by temporal population pulsations that changes the spectral gain line shape. The parametric term suppresses the gain of sidebands whose separation is much smaller than the reciprocal gain recovery time, while enhancing the gain of more distant sidebands. The large gain recovery frequency of the QCL compared to the FSR is essential to observe this parametric effect, which is responsible for the multiple-FSR sideband separation. We predict that by tuning the strength of the incoherent gain contribution, for example by engineering the modal overlap factors and the carrier diffusion, both amplitude-modulated (AM) or frequency-modulated emission can be achieved from QCLs. We provide initial evidence of an AM waveform emitted by a QCL with highly asymmetric facet reflectivities, thereby opening a promising route to ultrashort pulse generation in the mid-infrared. Together, the experiments and theory clarify a deep connection between parametric oscillation in optically pumped microresonators and the single-mode instability of lasers, tying together literature from the last 60 years.

physics.optics↗