arXiv subjects

Federico Nati

Publications and source records attributed to Federico Nati.

At least 19 recordsLinked to original sources

arXiv2026

Status and future development of the COSMOCal Project for absolute CMB polarization calibration

Cosmic Microwave Background (CMB) polarization measurements are pushing instrumental sensitivities to levels where calibration systematics become a dominant limitation. The large dynamic range between cosmological and Galactic emission prevents future experiments from relying only on diffuse sky measurements or standard celestial calibrators. To address this challenge, the COSmological Microwave Observations Calibrator (COSMOCal) project proposes an artificial calibration source deployed as a guest payload on a geostationary satellite, scheduled for launch by the Eutelsat group by 2030. This source will provide stable, well-characterized polarized microwave signals accessible to multiple ground-based observatories. In this work, we present the status of the project, the updated development timeline, and the refined scientific and technical requirements, defined with the observatories that plan to use this calibration source. Furthermore, we investigate the interplay between instrumental systematics and component separation in the presence of complex models of interstellar dust emission. We discuss in this paper how this can impact the recovery of the primordial signal, and whether residual calibration errors can degrade the performance of foreground cleaning algorithms.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Detector Polarization Angle Calibration using Sparse Wire Grid with Initial Data Sets of the Small Aperture Telescope

Improved measurements of $B$-modes in the cosmic microwave background can be obtained through accurate calibration of the orientation of detector antennas as projected onto the sky. Miscalibration of the detector polarization angle leads to a leakage of $E$-modes into $B$-modes, which can bias the detection of the latter. To achieve a $\sigma(r)$ of 0.003, the Simons Observatory Small Aperture Telescopes are required to calibrate the global polarization angle on the sky with an accuracy ${\lesssim}0.1^\circ$. We demonstrate a fully remote-controllable calibration system using a ``sparse wire grid," which injects a rotatable linear polarized signal across the telescope's focal plane. This calibration system is installed and operational on a Small Aperture Telescope at its observing site at the Parque Astron\'omico in the Atacama desert in Chile. We developed a pipeline for the detector polarization angle calibration, and demonstrate it using initial data for 93~GHz and 145~GHz frequency bands. The observed distribution of detector polarization angles is in agreement with the instrument design. Statistical uncertainties for the relatively calibrated polarization angles are $0.02^\circ$ and $0.03^\circ$ at 93~GHz and 145~GHz, respectively. Systematic uncertainty was evaluated to be $0.08^\circ$ at the hardware development and fabrication stage. Their sum in quadrature is less than $0.1^\circ$.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Quantifying the impact of beam chromaticity on large-scale B-mode science

The Simons Observatory (SO) Small Aperture Telescopes (SATs) will observe the Cosmic Microwave Background (CMB) temperature and polarization at six frequency bands. Within these bands, the angular response of the telescope (beam) is convolved with the instrument's spectral response (commonly called bandpass) and the signal from the sky, which leads to the band-averaged telescope beam response, which is sampled and digitized. The spectral properties of the band-averaged beam depend on the natural variation of the beam within the band, referred to as beam chromaticity. In this paper, we quantify the impact of the interplay of beam chromaticity and intrinsic frequency scaling from the various components that dominate the polarized sky emission on the tensor-to-scalar ratio, $r$, and foreground parameters. We do so by employing a parametric power-spectrum-based foreground component separation algorithm, namely BBPower, to which we provide beam-convolved time domain simulations performed with the beamconv software while assuming an idealized version of the SO SAT optics. We find a small, $0.02\sigma$, bias on $r$, due to beam chromaticity, which seems to mostly impact the dust spatial parameters, causing a maximum $0.77 \sigma$ bias on the dust $B$-mode spectra amplitude, $A_{d}$, when employing Gaussian foreground simulations. However, we find all parameter biases to be smaller than $1\sigma$ at all times, independently of the foreground model. This includes the case where we introduce additional uncertainty on the bandpass shape, which accounts for approximately half of the total allowed gain uncertainty, as estimated in previous work for the SO SATs.

astro-ph.CO↗

arXiv2025

PROTOCALC, A W-band polarized calibrator for CMB Telescopes: application to Simons Observatory and CLASS

Current- and next-generation Cosmic Microwave Background (CMB) experiments will measure polarization anisotropies with unprecedented sensitivities. The need for high precision in these measurements underscores the importance of gaining a comprehensive understanding of instrument properties, with a particular emphasis on the study of the beam properties and, in particular, their polarization characteristics, and the measurement of the polarization angle. In this context, a major challenge lies in the scarcity of millimeter polarized astrophysical sources with sufficient brightness and calibration knowledge to meet the stringent accuracy requirements of future CMB missions. This led to the development of a drone-borne calibration source designed for frequency band centered on approximately 90 GHz band, matching a commonly used channel in ground based CMB measurements. The PROTOtype CALibrator for Cosmology, PROTOCALC, has undergone thorough in-lab testing, and its properties have been subsequently modeled through simulation software integrated into the standard Simons Observatory (SO) analysis pipeline. Moreover, the PROTOCALC system has been tested in the field, having been deployed twice on calibration campaigns with CMB telescopes in the Atacama desert. The data collected constrain the roll angle of the source with a statistical accuracy of $0.045^\circ$.

astro-ph.IM↗

arXiv2025

Simons Observatory: Characterization of the Large Aperture Telescope Receiver

The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) survey experiment that currently consists of three 0.42m small-aperture telescopes (SATs) and one 6m large-aperture telescope (LAT), located at an elevation of 5200m in the Atacama Desert in Chile. At the LAT's focal plane, SO will install >62,000 transition-edge sensor detectors across 13 optics tubes (OTs) within the Large Aperture Telescope Receiver (LATR), the largest cryogenic camera ever built to observe the CMB. Here we report on the validation of the LATR in the laboratory and the subsequent dark testing and validation within the LAT. We show that the LATR meets cryogenic, optical, and detector specifications required for high-sensitivity measurements of the CMB. At the time of writing, the LATR is installed in the LAT with six OTs (corresponding to >31,000 detectors), and the LAT mirrors and remaining seven OTs are undergoing development.

astro-ph.IM↗

arXiv2025

The LSPE-Strip Pointing Reconstruction and Star Tracker

This paper aims to describe the Pointing Reconstruction Model (PRM) and the prototype Star Tracker, which will be mounted on LSPE-Strip, a microwave Q- and W-band CMB telescope planned for installation at the "Observatorio del Teide" in Tenerife. The PRM integrates information on the instantaneous attitude provided by the telescope control system to determine the actual pointing direction and focal plane orientation of the telescope. It accounts for various non-idealities in the telescope setup, represented by eight configuration angles, which will be calibrated using the Star Tracker. Following the derivation of the PRM formalism and its implementation, we investigate the pointing errors caused by incorrect calibration of these configuration angles to validate the required 1 arcminute maximum systematic pointing error for the LSPE-Strip survey. This paper also describes the main structure and operations of the Star Tracker and presents the results of a campaign of actual sky observations conducted with a prototype. The results demonstrate a Star Tracker RMS accuracy of approximately 3 arcseconds, while systematic errors remain below 10 arcseconds. Based on these results, we analyzed the problem of reconstructing the PRM configuration angles. Two methods for intercalibrating the Star Tracker's pointing direction with respect to the focal plane's pointing direction were examined: (1) observations of planets and (2) observations of a drone carrying both an optical beacon and a radio beacon. In the first case, an intercalibration accuracy between 1/3 arcminute and 1 arcminute is achievable. In the second case, the expected intercalibration accuracy ranges from 0.25 arcminute to 1 arcminute.

astro-ph.IM↗

arXiv2024

Calibration of CMB Telescopes with PROTOCALC

Cosmic Microwave Background experiments need to measure polarization properties of the incoming radiation very accurately to achieve their scientific goals. As a result of that, it is necessary to properly characterize these instruments. However, there are not natural sources that can be used for this purpose. For this reason, we developed the PROTOtype CALibrator for Cosmology, PROTOCALC, which is a calibrator source designed for the 90 GHz band of these telescopes. This source is purely polarized and the direction of the polarization vector is known with an accuracy better than 0.1 deg. This source flew for the first time in May 2022 showing promising result.

astro-ph.IM↗

arXiv2024

Simons Observatory: Pre-deployment Performance of a Large Aperture Telescope Optics Tube in the 90 and 150 GHz Spectral Bands

The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious new instrument suite, initially comprising three 0.5 m small-aperture telescopes and one 6 m large aperture telescope, is designed using a common combination of new technologies and new implementations to realize an observatory significantly more capable than the previous generation. In this paper, we present the pre-deployment performance of the first mid-frequency "optics tube" which will be fielded on the large aperture telescope with sensitivity to the 90 and 150 GHz spectral bands. This optics tube contains lenses, filters, detectors, and readout components, all of which operate at cryogenic temperatures. It is one of seven that form the core of the large aperture telescope receiver in its initial deployment. We describe this optics tube, including details of comprehensive testing methods, new techniques for beam and passband characterization, and its measured performance. The performance metrics include beams, optical efficiency, passbands, and forecasts for the on-sky performance of the system. We forecast a sensitivity that exceeds the requirements of the large aperture telescope with greater than 30% margin in each spectral band, and predict that the instrument will realize diffraction-limited performance and the expected detector passbands.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $\sigma(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.

astro-ph.IM↗

arXiv2024

The BLAST Observatory: A Sensitivity Study for Far-IR Balloon-borne Polarimeters

Sensitive wide-field observations of polarized thermal emission from interstellar dust grains will allow astronomers to address key outstanding questions about the life cycle of matter and energy driving the formation of stars and the evolution of galaxies. Stratospheric balloon-borne telescopes can map this polarized emission at far-infrared wavelengths near the peak of the dust thermal spectrum - wavelengths that are inaccessible from the ground. In this paper we address the sensitivity achievable by a Super Pressure Balloon (SPB) polarimetry mission, using as an example the Balloon-borne Large Aperture Submillimeter Telescope (BLAST) Observatory. By launching from Wanaka, New Zealand, BLAST Observatory can obtain a 30-day flight with excellent sky coverage - overcoming limitations of past experiments that suffered from short flight duration and/or launch sites with poor coverage of nearby star-forming regions. This proposed polarimetry mission will map large regions of the sky at sub-arcminute resolution, with simultaneous observations at 175, 250, and 350 $\mu m$, using a total of 8274 microwave kinetic inductance detectors. Here, we describe the scientific motivation for the BLAST Observatory, the proposed implementation, and the forecasting methods used to predict its sensitivity. We also compare our forecasted experiment sensitivity with other facilities.

astro-ph.IM↗

arXiv2023

The Atacama Cosmology Telescope: Systematic Transient Search of 3-Day Maps

We conduct a systematic search for transients in three years of data (2017-2019) from the Atacama Cosmology Telescope (ACT). ACT covers 40 percent of the sky at three bands spanning from 77 GHz to 277 GHz. Analysis of 3-day mean-subtracted sky maps, which were match-filtered for point sources, yielded 29 transients detections. Eight of these transients are due to known asteroids, and three others were previously published. Four of these events occur in areas of with poor noise models and thus we cannot be confident they are real transients. We are left with 14 new transient events occurring at 11 unique locations. All of these events are associated with either rotationally variable stars or cool stars. Ten events have flat or falling spectra indicating radiation from synchrotron emission. One event has a rising spectrum indicating a different engine for the flare.

astro-ph.SR↗

arXiv2023

The Atacama Cosmology Telescope: Map-Based Noise Simulations for DR6

The increasing statistical power of cosmic microwave background (CMB) datasets requires a commensurate effort in understanding their noise properties. The noise in maps from ground-based instruments is dominated by large-scale correlations, which poses a modeling challenge. This paper develops novel models of the complex noise covariance structure in the Atacama Cosmology Telescope Data Release 6 (ACT DR6) maps. We first enumerate the noise properties that arise from the combination of the atmosphere and the ACT scan strategy. We then prescribe a class of Gaussian, map-based noise models, including a new wavelet-based approach that uses directional wavelet kernels for modeling correlated instrumental noise. The models are empirical, whose only inputs are a small number of independent realizations of the same region of sky. We evaluate the performance of these models against the ACT DR6 data by drawing ensembles of noise realizations. Applying these simulations to the ACT DR6 power spectrum pipeline reveals a $\sim 20\%$ excess in the covariance matrix diagonal when compared to an analytic expression that assumes noise properties are uniquely described by their power spectrum. Along with our public code, $\mathtt{mnms}$, this work establishes a necessary element in the science pipelines of both ACT DR6 and future ground-based CMB experiments such as the Simons Observatory (SO).

astro-ph.CO↗

arXiv2023

The Atacama Cosmology Telescope: Modeling the Gas Thermodynamics in BOSS CMASS galaxies from Kinematic and Thermal Sunyaev-Zel'dovich Measurements

The thermal and kinematic Sunyaev-Zel'dovich effects (tSZ, kSZ) probe the thermodynamic properties of the circumgalactic and intracluster medium (CGM and ICM) of galaxies, groups, and clusters, since they are proportional, respectively, to the integrated electron pressure and momentum along the line-of-sight. We present constraints on the gas thermodynamics of CMASS galaxies in the Baryon Oscillation Spectroscopic Survey (BOSS) using new measurements of the kSZ and tSZ signals obtained in a companion paper. Combining kSZ and tSZ measurements, we measure within our model the amplitude of energy injection $εM_\star c^2$, where $M_\star$ is the stellar mass, to be $ε=(40\pm9)\times10^{-6}$, and the amplitude of the non-thermal pressure profile to be $α_{\rm Nth}<0.2$ (2$σ$), indicating that less than 20% of the total pressure within the virial radius is due to a non-thermal component. We estimate the effects of including baryons in the modeling of weak-lensing galaxy cross-correlation measurements using the best-fit density profile from the kSZ measurement. Our estimate reduces the difference between the original theoretical model and the weak-lensing galaxy cross-correlation measurements in arXiv:1611.08606 by half but does not fully reconcile it. Comparing the tSZ measurements to cosmological simulations, we find that simulations underestimate the CGM pressure at large radii while they fare better in comparison with the kSZ measurements. This suggests that the energy injected via feedback models in the simulations that we compared against does not sufficiently heat the gas at these radii. We do not find significant disagreement at smaller radii. These measurements provide novel tests of current and future simulations. This work demonstrates the power of joint, high signal-to-noise kSZ and tSZ observations, upon which future cross-correlation studies will improve.

astro-ph.CO↗

arXiv2022

The Atacama Cosmology Telescope: The Persistence of Neutrino Self-Interaction in Cosmological Measurements

We use data from the Atacama Cosmology Telescope (ACT) DR4 to search for the presence of neutrino self-interaction in the cosmic microwave background. Consistent with prior works, the posterior distributions we find are bimodal, with one mode consistent with $Λ$CDM and one where neutrinos strongly self-interact. By combining ACT data with large-scale information from WMAP, we find that a delayed onset of neutrino free streaming caused by significantly strong neutrino self-interaction is compatible with these data at the $2-3σ$ level. As seen in the past, the preference shifts to $Λ$CDM with the inclusion of Planck data. We determine that the preference for strong neutrino self-interaction is largely driven by angular scales corresponding to $700 \lesssim \ell \lesssim 1000$ in the ACT E-mode polarization data. This region is expected to be key to discriminate between neutrino self-interacting modes and will soon be probed with more sensitive data.

astro-ph.CO↗

arXiv2022

PROTOCALC: an artificial calibrator source for CMB telescopes

Cosmic Microwave Background experiments need to measure polarization properties of the incoming radiation very accurately to achieve their scientific goals. As a result of that, it is necessary to properly characterize these instruments. However, there are not natural sources that can be used for this purpose. For this reason, we developed the PROTOtype CALibrator for Cosmology, PROTOCALC, which is a calibrator source designed for the 90GHz band of these telescopes. This source is purely polarized and the direction of the polarization vector is known with an accuracy better than 0.1deg. This source flew for the first time in May 2022 showing promising result

astro-ph.IM↗

arXiv2022

The Atacama Cosmology Telescope: Constraints on Pre-Recombination Early Dark Energy

The early dark energy (EDE) scenario aims to increase the value of the Hubble constant ($H_0$) inferred from cosmic microwave background (CMB) data over that found in $Λ$CDM, via the introduction of a new form of energy density in the early universe. The EDE component briefly accelerates cosmic expansion just prior to recombination, which reduces the physical size of the sound horizon imprinted in the CMB. Previous work has found that non-zero EDE is not preferred by Planck CMB power spectrum data alone, which yield a 95% confidence level (CL) upper limit $f_{\rm EDE} < 0.087$ on the maximal fractional contribution of the EDE field to the cosmic energy budget. In this paper, we fit the EDE model to CMB data from the Atacama Cosmology Telescope (ACT) Data Release 4. We find that a combination of ACT, large-scale Planck TT (similar to WMAP), Planck CMB lensing, and BAO data prefers the existence of EDE at $>99.7$% CL: $f_{\rm EDE} = 0.091^{+0.020}_{-0.036}$, with $H_0 = 70.9^{+1.0}_{-2.0}$ km/s/Mpc (both 68% CL). From a model-selection standpoint, we find that EDE is favored over $Λ$CDM by these data at roughly $3σ$ significance. In contrast, a joint analysis of the full Planck and ACT data yields no evidence for EDE, as previously found for Planck alone. We show that the preference for EDE in ACT alone is driven by its TE and EE power spectrum data. The tight constraint on EDE from Planck alone is driven by its high-$\ell$ TT power spectrum data. Understanding whether these differing constraints are physical in nature, due to systematics, or simply a rare statistical fluctuation is of high priority. The best-fit EDE models to ACT and Planck exhibit coherent differences across a wide range of multipoles in TE and EE, indicating that a powerful test of this scenario is anticipated with near-future data from ACT and other ground-based experiments.

astro-ph.CO↗

arXiv2022

The Atacama Cosmology Telescope: Measurement and Analysis of 1D Beams for DR4

We describe the measurement and treatment of the telescope beams for the Atacama Cosmology Telescope's fourth data release, DR4. Observations of Uranus are used to measure the central portion (<12') of the beams to roughly -40 dB of the peak. Such planet maps in intensity are used to construct azimuthally averaged beam profiles, which are fit with a physically motivated model before being transformed into Fourier space. We investigate and quantify a number of percent-level corrections to the beams, all of which are important for precision cosmology. Uranus maps in polarization are used to measure the temperature-to-polarization leakage in the main part of the beams, which is <1% (2.5%) at 150 GHz (98 GHz). The beams also have polarized sidelobes, which are measured with observations of Saturn and deprojected from the ACT time-ordered data. Notable changes relative to past ACT beam analyses include an improved subtraction of the atmospheric effects from Uranus calibration maps, incorporation of a scattering term in the beam profile model, and refinements to the beam model uncertainties and the main temperature-to-polarization leakage terms in the ACT power spectrum analysis.

astro-ph.IM↗

arXiv2022

In-flight polarization angle calibration for LiteBIRD: blind challenge and cosmological implications

We present a demonstration of the in-flight polarization angle calibration for the JAXA/ISAS second strategic large class mission, LiteBIRD, and estimate its impact on the measurement of the tensor-to-scalar ratio parameter, r, using simulated data. We generate a set of simulated sky maps with CMB and polarized foreground emission, and inject instrumental noise and polarization angle offsets to the 22 (partially overlapping) LiteBIRD frequency channels. Our in-flight angle calibration relies on nulling the EB cross correlation of the polarized signal in each channel. This calibration step has been carried out by two independent groups with a blind analysis, allowing an accuracy of the order of a few arc-minutes to be reached on the estimate of the angle offsets. Both the corrected and uncorrected multi-frequency maps are propagated through the foreground cleaning step, with the goal of computing clean CMB maps. We employ two component separation algorithms, the Bayesian-Separation of Components and Residuals Estimate Tool (B-SeCRET), and the Needlet Internal Linear Combination (NILC). We find that the recovered CMB maps obtained with algorithms that do not make any assumptions about the foreground properties, such as NILC, are only mildly affected by the angle miscalibration. However, polarization angle offsets strongly bias results obtained with the parametric fitting method. Once the miscalibration angles are corrected by EB nulling prior to the component separation, both component separation algorithms result in an unbiased estimation of the r parameter. While this work is motivated by the conceptual design study for LiteBIRD, its framework can be broadly applied to any CMB polarization experiment. In particular, the combination of simulation plus blind analysis provides a robust forecast by taking into account not only detector sensitivity but also systematic effects.

astro-ph.CO↗