Searcharxiv⌕ Search

arXiv subjects

Feng Xu

Publications and source records attributed to Feng Xu.

At least 19 recordsLinked to original sources
arXiv2026

TourPhysics: Bringing Physics to World Models for Exploration and Manipulation from a Single Image

Interactive visual world models must distinguish observation from physical intervention. Camera motion reveals new surfaces, whereas intervention changes object motion, contact, and deformation. Current video world models are largely driven by appearance priors and often lose physical or spatial consistency over long horizons. We present TourPhysics, an online framework initialized from a single image and a declarative physical configuration. TourPhysics extends PhysOmni, our ACM Multimedia 2026 work, from finite physics-grounded video synthesis to persistent exploration and manipulation. TourPhysics combines deterministic simulation with video generation while assigning separate roles to simulator state, geometric evidence, generator controls, and appearance memory. For each action, the simulator computes a finite physical and camera trajectory before the corresponding observation is generated. Accepted observations publish the terminal state and update the appearance memory and subsequent generator controls, while the committed state and simulator geometry remain fixed throughout synthesis and retry. We further separate the simulator geometry used for projection and visibility from the relative depth used to condition the generator. A reference-anchored memory retrieves accepted static appearance through geometric cross-view correspondence and incorporates it through a bounded residual that reverts to the native path when no valid correspondence exists. On simulator-defined camera tours and object manipulations, TourPhysics follows prescribed camera and object trajectories more closely than the evaluated baselines, preserves the input scene, and reduces appearance drift during long-horizon revisits.

cs.CV↗
arXiv2026

Intrinsic Scatterer Representation for Forward Scattering Modeling of Complex Radar Targets

Forward modeling of scattering centers of radar targets is critical for advanced information retrieval of Synthetic Aperture Radar (SAR) images. Existing forward modeling approaches rely on meshing the target and computing scattering via ray-tracing techniques, which not only incur high computational cost but also discard the semantic information of target geometry, thereby limiting the interpretability of SAR imagery. To address these issues, this paper proposes a novel forward scattering modeling framework that directly constructs stable, compact, and physically meaningful scatterers from target geometry. This formulation decouples target representation from specific observation configurations, enabling an intrinsic scatterer description across varying viewing angles. Specifically, an improved Random Sample Consensus (RANSAC) scheme is first developed to robustly extract planes, cylinders, and spheres from target point clouds, yielding single-bounce scatterers. Potential multiple-bounce scatterers are then automatically detected by analyzing inter-primitive relations, and further refined through geometric clipping and parameter alignment to produce unique scattering representations compatible with canonical scattering center models. Finally, radar responses and SAR images can be generated under arbitrary observation configurations based on the constructed scatterers. The proposed method is validated through extensive experiments, including comparisons with electromagnetic simulations and measured data. The results show that it can accurately characterize the scattering behaviors of complex targets, providing an efficient, interpretable, and reliable solution for SAR image modeling and understanding.

eess.SP↗
arXiv2026

ETHead: Generating Expressive 3D Facial Animation and Head Movement from Speech

Generating expressive 3D talking heads solely from speech remains a significant challenge due to the scarcity of high-fidelity 3D data, which limits the modeling of complex emotional motion patterns. In this paper, we introduce \textbf{E}xpressive \textbf{T}alking \textbf{Head} (ETHead), a method for generating 3D facial and head motions that vividly align with the emotional content of input speech. To overcome the data limitations, we design a self-distillation framework that leverages large-scale 2D talking videos to pre-train a specialized speech encoder. By incorporating a novel emotion-modulated probabilistic masking mechanism, this framework aligns speech representations with expressive visual dynamics, allowing the encoder to extract features highly correlated with facial and head motions directly from audio. These features are then leveraged to guide 3D generation, enriching input cues and providing explicit supervision through a joint speech-motion latent space. Extensive experiments demonstrate that ETHead substantially outperforms state-of-the-art methods. Furthermore, our motion-aligned speech encoder can serve as a transferable module, offering a general solution for enhancing expressiveness in other 3D talking head animation frameworks. The project page is available at https://verdure-oss.github.io/ETHead.github.io/.

cs.GR↗
arXiv2026

Smartwatch Photoplethysmography-Derived Heart Age via ECG-Guided Cross-Modal Pretraining as a Digital Biomarker of Vascular Aging

Digital biomarkers of cardiovascular aging, often termed heart or vascular age, have been widely studied, but most rely on resting electrocardiography (ECG), imaging, or specialized vascular assessments. Evidence linking wearable photoplethysmography (PPG) to arterial stiffness and hypertension remains limited. We developed an ECG-guided cross-modal framework that uses synchronized smartwatch ECG to enhance PPG representation learning during pretraining while requiring only PPG at inference. The study included three OPPO cohorts across China, comprising 581,804 participants and 7,452,131 recordings. The Vascular Health Study cohort supported ECG-PPG self-supervised pretraining, fine-tuning, and internal validation, while two external cohorts assessed associations with pulse wave velocity (PWV) and prevalent hypertension. Combining subject-aware learning with ECG-PPG contrastive alignment, the PPG-only model achieved subject-level mean absolute errors of 5.895 years (Pearson r=0.819) in the PWV cohort and 4.344 years (r=0.800) in the home blood pressure monitoring cohort. Aggregating repeated recordings further improved short-term stability. After adjustment for chronological age, heart age gap was associated with PWV (partial r=0.2627, P<0.001); each 1-year increase corresponded to 0.062 m/s higher PWV, and accelerated versus decelerated heart aging was associated with 0.91 m/s higher adjusted PWV. Each 1-SD increase in adjusted heart age gap was associated with greater odds of prevalent hypertension (OR 1.72, 95% CI 1.49-1.99), while the highest versus lowest quartile had an OR of 4.25. These findings support smartwatch PPG-derived heart age gap as a scalable digital biomarker of arterial stiffness and prevalent hypertension.

eess.SP↗
arXiv2026

DexDirect: Direct Kinesthetic Arm Guidance for Efficient Dexterous Demonstration Collection

Scalable collection of dexterous manipulation demonstrations remains a major bottleneck for robot learning. High-fidelity interfaces often require costly hardware and extensive setup, while low-setup, low cost alternatives tend to provide less precise control and impose greater cognitive workload on operators. We present DexDirect, a direct kinesthetic arm guidance for efficient dexterous demonstration collection. The operator drags a 6-DoF gravity-compensated robot arm directly by a handle, while a single webcam retargets operator's other hand onto a 16 joints 13-DoF dexterous robot hand. User studies suggest DexDirect collects 17.2x and 3.2x more successful demonstrations compared to purely vision (AnyTeleop) and pose-tracking (TeleDex) baselines. An adapted NASA-TLX shows DexDirect greatly reduces mental demand, effort, and frustration, despite raising physical demand. A diffusion policy trained on DexDirect demonstrations reaches a 90% success rate on a cube pick-and-place task. These results suggest that direct kinesthetic arm guidance combined with vision-based hand retargeting provides an efficient low-setup and scalable interface for collecting dexterous manipulation demonstrations

cs.RO↗
arXiv2026

ClinFusion: A Vision-Centric Multimodal LLM System for Holistic Medical Understanding

Multimodal large language models (MLLMs) hold immense potential to revolutionize clinical practice, yet deploying them in the medical domain is fundamentally a vision-centric challenge: models must absorb knowledge from heterogeneous 2D and 3D medical images, and evaluation protocols must align with radiologists' clinical practice and provide an accurate, fine-grained and factualness-driven assessment. In this paper, we introduce ClinFusion, a vision-centric MLLM designed for holistic medical understanding that systematically addresses these limitations. We propose a compositional and cascaded vision encoder architecture featuring a Cascade Spatial-Aware Locality Fusion operator that unifies diverse 2D and native 3D medical image understanding within a fused encoder. We further introduce a vision-grounded evaluation framework, including MedIF-Bench for instruction-following assessment and a region-of-interest-grounded method for clinically aligned and factualness-driven report generation evaluation. We show that ClinFusion sets a new state-of-the-art across a comprehensive suite of 2D and 3D multimodal medical benchmarks---spanning visual question answering, report generation, and instruction following---as well as textual medical tasks, outperforming leading open-source medical MLLMs (\textit{e.g.}, Hulu-Med, Lingshu) on 20 out of 24 benchmarks and demonstrating multimodal capabilities better than powerful proprietary models such as GPT-5.2 and Gemini-3-Flash on 13 out of 16 benchmarks, and can be further augmented with agentic tool use for retrieval-augmented and tool-assisted clinical workflows. A blinded evaluation by board-certified radiologists confirms that ClinFusion produces the highest-ranked reports, and validates our RoI-grounded metric as achieving the strongest correlation with expert judgment among all automatic evaluation metrics examined.

cs.CV↗
arXiv2026

UVFaceFusion: Fast Multi-view Topologically Consistent Face Reconstruction in the Wild via UV-space Neural Fusion

Reconstructing high-fidelity facial geometry with an assigned topology is essential for digital avatar creation and animation, yet existing automated methods often trade off geometric fidelity and in-the-wild generalization. We present UVFaceFusion, a feed-forward framework for multi-view, fixed-topology face reconstruction from daily images. Our key idea is to replace heuristic topological optimization with learnable neural fusion in a canonical UV space. Given multi-view images, we first obtain dense point maps and facial UV correspondences of each view using VGGT and Pixel3DMM, respectively. Then, the view-specific point maps are lifted into the canonical UV domain and fused with a novel mask-aware neural fusion network. The network predicts a complete UV-space point map, from which a fixed-topology mesh is directly sampled. Although trained only on Ava-256, UVFaceFusion generalizes well to multiple public benchmarks and in-the-wild captures, benefiting from its canonical UV-space geometry-to-geometry fusion that reduces dependence on dataset-specific appearance and capture conditions. Experiments on various benchmarks show that UVFaceFusion achieves state-of-the-art reconstruction accuracy while reconstructing a mesh from 16 input views in less than 3 seconds on a single RTX 4090. Code is available at https://github.com/grignarder/UVFaceFusion.

cs.CV↗
arXiv2026

Diffusion-Based Material Regularization for Physics-Based Inverse Rendering

Reconstructing physics-based 3D assets -- geometry, materials, and illumination -- from multi-view images is a core problem in computer graphics and vision, and a prerequisite for realistic relighting and editing. Physics-based inverse rendering offers an accurate image-formation model, but is severely underconstrained: without strong priors, illumination is baked into materials, and reconstructions generalize poorly to novel views and lighting. Data-driven diffusion models, in contrast, predict visually plausible materials, yet their predictions rarely satisfy the rendering equation and are not directly usable for physics-based rendering. We bridge these two paradigms rather than replacing either. Our key idea is to treat the predictions of a state-of-the-art diffusion model not as target material values but as a similarity kernel for optimization: we introduce a regularization loss that penalizes deviations in the optimized material over surface regions where the diffusion predictions are near-constant, while leaving the optimization free to match the input images. Built on this regularizer, our end-to-end pipeline jointly reconstructs geometry, materials, and illumination, yielding high-quality assets that drop into standard rendering pipelines and relight faithfully. On the Synthetic4Relight, Stanford-ORB, and DTC-Synthetic datasets, our method significantly outperforms state-of-the-art baselines in both reconstruction accuracy and relighting quality.

cs.CV↗
arXiv2026

ActiveVital: Geometry-Aware Embodied Vital Signs Monitoring for Home Healthcare Robots

Home robots require reliable vital signs monitoring to support long-term companionship and safety in daily environments, yet obtaining respiration and heart rate without physical contact remains challenging in unconstrained home settings. Millimeter-wave (mmWave) radar offers a promising solution due to its phase sensitivity to sub-millimeter motions. However, mmWave measurements are fundamentally constrained by observation geometry, since only the radial component of motion is observable. Consequently, arbitrary robot-human orientations often introduce angular misalignment that destabilizes vital signs estimation. To address this limitation, we reformulate vital signs monitoring from passive signal recovery to active geometric regulation. We propose ActiveVital, a vision-guided sensing framework that treats sensing geometry as an explicit control variable for robots. It localizes the chest anchor via visual keypoints and converts alignment errors into control commands. This steers the robot-mounted radar toward near-normal incidence to the thoracic surface, maximizing radial observability within a perception-action loop. A differential phase enhancement module further stabilizes signal extraction under motion. Experiments show that ActiveVital reduces respiration interval error from 0.87 s to 0.14 s and heart rate error from 13.59 bpm to 2.22 bpm, achieving accuracy comparable to controlled static sensing while remaining robust under unconstrained robot-human configurations.

cs.RO↗
arXiv2026

Modeling Cell-Cycle-Aware Single-Cell Drug Perturbation Responses

Single-cell drug perturbation models should capture transcriptional response magnitude and whether a treatment changes the proliferative state of the cell. This is difficult because cell-cycle variation is often treated as a nuisance factor, and benchmark processing rarely makes drug-induced phase changes a primary prediction target. We introduce scCycleMol, a cell-cycle-aware perturbation prediction framework built on a curated 24-hour SciPlex3 benchmark with standardized molecule identities, dose and cell-line metadata, modeled genes, and expression-derived cell-cycle supervision. scCycleMol derives cell-cycle supervision from the treated state and applies it to predicted treated expression without using phase as an input covariate. The model includes a learnable full-expression cell-cycle head with circular G1/S/G2M targets, and we evaluate readout-only supervision (with stop-gradient) versus closed-loop supervision (backpropagating through decoder, dose-response module, and drug representation). We also compare molecular representations and pretraining sources to isolate the effect of the cell-cycle objective. On a processed 24-hour SciPlex3 benchmark (635,541 cells, 186 perturbations, 188 compound embeddings, 3 cell lines, 4 doses plus DMSO, 5,080 genes), the best LINCS-pretrained circular variant reaches 0.9093 mean all-gene R-squared and 0.6843 mean DE-gene R-squared. Under matched preprocessing, closed-loop cell-cycle supervision improves phase accuracy by 0.54-0.62 points while keeping mean all-gene R-squared within 0.003 of matched chemCPA no-cell-cycle models; Tahoe-pretrained readout-only circular supervision achieves the strongest phase accuracy at 0.9609.

q-bio.QM↗
arXiv2026

Ling and Ring 2.6 Technical Report: Efficient and Instant Agentic Intelligence at Trillion-Parameter Scale

Efficient and scalable agentic intelligence requires models that can deliver both low-latency responses and strong reasoning capabilities while remaining practical to train, serve, and deploy. In this report, we present Ling-2.6 and Ring-2.6, a family of models designed to address this challenge at scale. Ling-2.6 is optimized for instant response generation and high capability per output token, whereas Ring-2.6 is tailored for deeper reasoning and more advanced agentic workflows. Instead of training from scratch, we upgrade the Ling-2.0 base model through architectural migration pre-training and large-scale post-training. This upgrade is guided by a unified co-design of model architecture, optimization objectives, serving systems, and agent training environments, enabling improvements in both model capability and deployment efficiency. At the architectural level, we introduce a hybrid linear attention design that integrates Lightning Attention with MLA, improving the efficiency of long-context training and decoding. To further enhance token efficiency, we optimize capability per output token through Evolutionary Chain-of-Thought, Linguistic Unit Policy Optimization, bidirectional preference alignment, and shortest-correct-response distillation. For agentic capabilities, we propose KPop, a reinforcement learning framework designed to support stable training of Ring-2.6-1T on large-scale environment-grounded data. KPop improves training efficiency through asynchronous scheduling across coding, search, tool use, and workflow execution, enabling scalable learning from complex agent-environment interactions. Together, Ling-2.6 and Ring-2.6 provide a practical pathway toward efficient, scalable, and open agentic systems. We open-source all checkpoints in the 2.6 family to support further research and development in practical agentic intelligence.

cs.CL↗
arXiv2026

Nonparametric Learning and Earning with One-Point Feedback under Nonstationarity

Firms increasingly rely on dynamic pricing to respond to evolving customer demand, yet in many applications they observe only the revenue generated by a single posted price in each period. At the same time, market conditions may shift gradually or abruptly due to changes in customer preferences, competition, or external shocks. These features create two intertwined challenges: learning the revenue--demand relationship from limited feedback and adapting pricing decisions to a changing environment. We study how a seller can learn and earn effectively under these constraints, without assuming a specific parametric form for demand. We develop a learning framework that updates prices using revenue-based gradient approximations constructed from one observation per period. To address environmental changes, we incorporate a restarting mechanism that periodically refreshes the learning process so that outdated information is discounted. When the degree of nonstationarity is unknown, we further introduce a meta-learning layer to adaptively hedge across multiple restarting schedules. We provide performance guarantees for our approach, showing how cumulative revenue loss relative to a fully informed benchmark depends on both the time horizon and the magnitude of market variation. Simulation experiments using synthetic and real-world data illustrate the effectiveness of the proposed procedures.

cs.LG↗
arXiv2026

PhysOmni: Physics-Grounded Multi-Object Scene Generation from a Single Image with Real-Time Interaction

Recent generative video models achieve impressive visual quality but remain constrained by limited physical consistency and controllability. Existing video generation methods provide minimal physical control, and single-image-to-3D conversion approaches often suffer from object interpenetration. Furthermore, physics-based scene-level 3D generation methods exhibit spatial misalignment, stylized artifacts, and inconsistencies with the input data, restricting their use in realistic interactive video synthesis. We propose PhysOmni, a training-free framework that converts a single image into a physically consistent and controllable video through holistic scene-level 3D reconstruction. By rep?resenting the full scene geometry in a unified spatial coordinate system, PhysOmni resolves object penetration and alignment ambiguity. Unlike prior methods, this formulation enables accurate scene?level multi-object interactions and introduces richer, complex control types for advanced mechanics?based manipulation. By decoupling simulation from rendering, PhysOmni bypasses latency-heavy priors, achieving real-time physical interaction previews paired while preserving photorealistic visual fidelity. Experimental results demonstrate that PhysOmni substantially outperforms prior methods in physical fidelity, spatial coherence, and controllability. Project Page: https://physomni.github.io/

cs.GR↗
arXiv2026

Fair Conformal Classification via Learning Representation-Based Groups

Conformal prediction methods provide statistically rigorous marginal coverage guarantees for machine learning models, but such guarantees fail to account for algorithmic biases, thereby undermining fairness and trust. This paper introduces a fair conformal inference framework for classification tasks. The proposed method constructs prediction sets that guarantee conditional coverage on adaptively identified subgroups, which can be implicitly defined through nonlinear feature combinations. By balancing effectiveness and efficiency in producing compact, informative prediction sets and ensuring adaptive equalized coverage across unfairly treated subgroups, our approach paves a practical pathway toward trustworthy machine learning. Extensive experiments on both synthetic and real-world datasets demonstrate the effectiveness of the framework.

cs.LG↗
arXiv2026

Uncertainty Quantification for LLM-based Code Generation

Prediction sets provide a theoretically grounded framework for quantifying uncertainty in machine learning models. Adapting them to structured generation tasks, in particular, large language model (LLM) based code generation, remains a challenging problem. An existing attempt proposes PAC prediction sets but is limited by its strong monotonicity assumption on risk and single-label classification framework, which severely limits the space of candidate programs and cannot accommodate the multiple valid outputs inherent to code generation. To address these limitations, we propose an approach RisCoSet that leverages multiple hypothesis testing to construct risk-controlling predictions for LLM-based code generation. Given a trained code generation model, we produce a prediction set represented by a partial program, which is guaranteed to contain a correct solution with high confidence. Extensive experiments on three LLMs demonstrate the effectiveness of the proposed method. For instance, compared with the state-of-the-art, our method can significantly reduce the code removal by up to 24.5%, at the same level of risk.

cs.SE↗
arXiv2026

Learning a Delighting Prior for Facial Appearance Capture in the Wild

High-quality facial appearance capture has traditionally required costly studio recording. Recent works consider an in-the-wild smartphone-based setup; however, their model-based inverse rendering paradigm struggles with the complex disentanglement of reflectance from unknown illumination. To bridge this gap, we propose to shift the paradigm into training a powerful delighting network as a prior to constrain the optimization. We leverage the OLAT dataset and the rendered Light Stage scans for training, and propose Dataset Latent Modulation (DLM) to seamlessly integrate these heterogeneous data sources. Specifically, by conditioning the core network on learnable source-aware tokens, we decouple dataset-specific styles from physical delighting principles, enabling the emergence of a delighting prior that outperforms existing proprietary models. This powerful delighting prior enables a simple and automatic appearance capture pipeline that achieves high-quality reflectance estimation from casual video inputs, outperforming prior arts by a large margin. Furthermore, we leverage our appearance capture method to transform the multi-view NeRSemble dataset into NeRSemble-Scan, a large-scale collection of 4K-resolution relightable scans. By open-sourcing our model and the NeRSemble-Scan dataset, we democratize high-end facial capture and provide a new foundation for the research community to build photorealistic digital humans.

cs.CV↗
arXiv2026

Robust Deepfake Detection, NTIRE 2026 Challenge: Report

Robustness is a long-overlooked problem in deepfake detection. However, detection performance is nearly worthless in the real world if it suffers under exposure to even slight image degradation. In addition to weaker degradations that can accidentally occur in the image processing pipeline, there is another risk of malicious deepfakes that specifically introduce degradations, purposefully exploiting the detector's weaknesses in that regard. Here, we present an overview of the NTIRE 2026 Robust Deepfake Detection Challenge, which specifically addresses that problem. Participants were tasked with building a detector that would later be tested on an unknown test-set, which included both common and uncommon degradations of various strengths. With a total number of 337 participants and 57 submissions to the final leaderboard, the first edition of the challenge was well received. To ensure the reliability of the results, participants were given only 24h to complete the test run with no labels provided, limiting the possibility of training on the test data. Furthermore, the top solutions were scored on a private test-set to detect any such overfitting. This report presents the competition setting, dataset preparation, as well as details and performance of methods. Top methods rely on large foundation models, ensembles, and degradation training to combine generality and robustness.

cs.CV↗
arXiv2026

MLG-Stereo: ViT Based Stereo Matching with Multi-Stage Local-Global Enhancement

With the development of deep learning, ViT-based stereo matching methods have made significant progress due to their remarkable robustness and zero-shot ability. However, due to the limitations of ViTs in handling resolution sensitivity and their relative neglect of local information, the ability of ViT-based methods to predict details and handle arbitrary-resolution images is still weaker than that of CNN-based methods. To address these shortcomings, we propose MLG-Stereo, a systematic pipeline-level design that extends global modeling beyond the encoder stage. First, we propose a Multi-Granularity Feature Network to effectively balance global context and local geometric information, enabling comprehensive feature extraction from images of arbitrary resolution and bridging the gap between training and inference scales. Then, a Local-Global Cost Volume is constructed to capture both locally-correlated and global-aware matching information. Finally, a Local-Global Guided Recurrent Unit is introduced to iteratively optimize the disparity locally under the guidance of global information. Extensive experiments are conducted on multiple benchmark datasets, demonstrating that our MLG-Stereo exhibits highly competitive performance on the Middlebury and KITTI-2015 benchmarks compared to contemporaneous leading methods, and achieves outstanding results in the KITTI-2012 dataset.

cs.CV↗