SearcharxivSearch

arXiv subjects

Fengnian Xia

Publications and source records attributed to Fengnian Xia.

At least 19 recordsLinked to original sources

Breaking the material-limited temperature coefficient of resistance via carrier feedback in a single transistor

The temperature coefficient of resistance (TCR) is one of the most fundamental properties of a material. Semiconductor materials exhibiting high TCR are promising candidates for applications in high-resolution thermal imaging for autonomous systems, high-precision temperature sensing, and neuromorphic computing. However, the TCR magnitude is typically below 5%/K near 300 K for thermal imaging materials, such as vanadium oxide and amorphous silicon. Inspired by the distinctive characteristic of feedback in electronic circuits, we demonstrate a voltage-tunable TCR of up to 150%/K near 300 K in a two-terminal InGaAs/InP n-p-n transistor, enabled by an internal coherent carrier feedback mechanism. In this device, current amplification arises from a synergistic interplay between temperature-dependent transistor gain and avalanche multiplication. Carriers amplified at the emitter-base junction via the transistor effect are injected into the collector-base junction, where avalanche multiplication generates additional carriers. These excess carriers are then fed back to the emitter-base junction, triggering further transistor amplification. This regenerative positive feedback loop results in a high and bias-tunable temperature coefficient of resistance (TCR). This work reveals the potential of device engineering in overcoming the fundamental material-level physical limits of temperature properties.

physics.app-ph

The 2D Materials Roadmap

Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials.

cond-mat.mtrl-sci

Electrically Reconfigurable Intelligent Optoelectronics in 2-D van der Waals Materials

In optoelectronics, achieving electrical reconfigurability is crucial as it enables the encoding, decoding, manipulating, and processing of information carried by light. In recent years, two-dimensional van der Waals (2-D vdW) materials have emerged as promising platforms for realizing reconfigurable optoelectronic devices. Compared to materials with bulk crystalline lattice, 2-D vdW materials offer superior electrical reconfigurability due to high surface-to-volume ratio, quantum confinement, reduced dielectric screening effect, and strong dipole resonances. Additionally, their unique band structures and associated topology and quantum geometry provide novel tuning capabilities. This review article seeks to establish a connection between the fundamental physics underlying reconfigurable optoelectronics in 2-D materials and their burgeoning applications in intelligent optoelectronics. We first survey various electrically reconfigurable properties of 2-D vdW materials and the underlying tuning mechanisms. Then we highlight the emerging applications of such devices, including dynamic intensity, phase and polarization control, and intelligent sensing. Finally, we discuss the opportunities for future advancements in this field.

physics.optics

Nonlinear Self-Calibrated Spectrometer with Single GeSe-InSe Heterojunction Device

Optical spectroscopy the measurement of electromagnetic spectra is fundamental to various scientific domains and serves as the building block of numerous technologies. Computational spectrometry is an emerging field that employs an array of photodetectors with different spectral responses or a single photodetector device with tunable spectral response, in conjunction with numerical algorithms, for spectroscopic measurements. Compact single photodetectors made from layered materials are particularly attractive, since they eliminate the need for bulky mechanical and optical components used in traditional spectrometers and can easily be engineered as heterostructures to optimize device performance. However, compact tunable photodetectors are typically nonlinear devices and this adds complexity to extracting optical spectra from the device response. Here, we report on the training of an artificial neural network (ANN) to recover the full nonlinear spectral photoresponse of a nonlinear problem of high dimensionality of a single GeSe-InSe p-n heterojunction device. We demonstrate the functionality of a calibrated spectrometer in the spectral range of 400-1100 nm, with a small device footprint of ~25X25 micrometers, and we achieve a mean reconstruction error of 0.0002 for the power-spectrum at a spectral resolution of 0.35 nm. Using our device, we demonstrate a solution to metamerism, an apparent matching of colors with different power spectral distributions, which is a fundamental problem in optical imaging.

physics.app-ph

Hyperbolic phonon-polariton electroluminescence in graphene-hBN van der Waals heterostructures

Phonon-polaritons are electromagnetic waves resulting from the coherent coupling of photons with optical phonons in polar dielectrics. Due to their exceptional ability to confine electric fields to deep subwavelength scales with low loss, they are uniquely poised to enable a suite of applications beyond the reach of conventional photonics, such as sub-diffraction imaging and near-field energy transfer. The conventional approach to exciting phonon-polaritons through optical methods, however, necessitates costly mid-infrared and terahertz coherent light sources along with near-field scanning probes, and generally leads to low excitation efficiency due to the substantial momentum mismatch between phonon-polaritons and free-space photons. Here, we demonstrate that under proper conditions, phonon-polaritons can be excited all-electrically by flowing charge carriers. Specifically, in hexagonal boron nitride (hBN)/graphene heterostructures, by electrically driving charge carriers in ultra-high-mobility graphene out of equilibrium, we observe bright electroluminescence of hBN's hyperbolic phonon-polaritons (HPhPs) at mid-IR frequencies. The HPhP electroluminescence shows a temperature and carrier density dependence distinct from black-body or super-Planckian thermal emission. Moreover, the carrier density dependence of HPhP electroluminescence spectra reveals that HPhP electroluminescence can arise from both inter-band transition and intra-band Cherenkov radiation of charge carriers in graphene. The HPhP electroluminescence offers fundamentally new avenues for realizing electrically-pumped, tunable mid-IR and THz phonon-polariton lasers, and efficient cooling of electronic devices.

cond-mat.mes-hall

Scalable van der Waals epitaxy of tunable moiré heterostructures

The unique physics found in moiré superlattices of twisted or lattice-mismatched atomic layers hold great promise for future quantum technologies. However, twisted configurations are typically thermodynamically unfavorable, making the accurate twist angle control in direct growth implausible. While rotationally aligned moiré superlattices based on lattice-mismatched layers such as WSe2/WS2 can be synthesized, they lack the critical tunability of the moiré period and the moiré formation mechanisms are not well-understood. Here, we report the scalable, thermodynamically driven van der Waals epitaxy of stable moirés with tunable period from 10 to 45 nanometers, based on lattice mismatch engineering in two WSSe layers with adjustable chalcogens ratios. Contrarily to conventional epitaxy, where lattice mismatch induced stress hinders high-quality growth, we reveal the key role of bulk stress in moiré formation, as well as its unique interplay with edge stress in shaping the moiré growth modes. Moreover, the synthesized superlattices display tunable interlayer, and moiré intralayer excitons. Our studies unveil the unique epitaxial science of moiré synthesis and lay the foundations for moiré-based technologies.

cond-mat.mtrl-sci

Moiré Band Topology in Twisted Bilayer Graphene

Recently twisted bilayer graphene (t-BLG) emerges as a new strongly correlated physical platform near a magic twist angle, which hosts many exciting phenomena such as the Mott-like insulating phases, unconventional superconducting behavior and emergent ferromagnetism. Besides the apparent significance of band flatness, band topology may be another critical element in determining strongly correlated twistronics yet receives much less attention. Here we report compelling evidence for nontrivial noninteracting band topology of t-BLG moiré Dirac bands through a systematic nonlocal transport study, in conjunction with an examination rooted in $K$-theory. The moiré band topology of t-BLG manifests itself as two pronounced nonlocal responses in the electron and hole superlattice gaps. We further show that the nonlocal responses are robust to the interlayer electric field, twist angle, and edge termination, exhibiting a universal scaling law. While an unusual symmetry of t-BLG trivializes Berry curvature, we elucidate that two $Z_2$ invariants characterize the topology of the moiré Dirac bands, validating the topological edge origin of the observed nonlocal responses. Our findings not only provide a new perspective for understanding the emerging strongly correlated phenomena in twisted van der Waals heterostructures, but also suggest a potential strategy to achieve topologically nontrivial metamaterials from topologically trivial quantum materials based on twist engineering.

cond-mat.str-el

Strong mid-infrared photoresponse in small-twist-angle bilayer graphene

Recently the small-twist-angle (< 2°) bilayer graphene has received extraordinary attentions due to its exciting physical properties. Compared with monolayer graphene, the Brillouin zone folding in twisted bilayer graphene (TBG) leads to the formation of superlattice bandgap and significant modification of density of states. However, these emerging properties have rarely been leveraged for the realization of new optoelectronic devices. Here we demonstrate the strong, gate-tunable photoresponse in mid-infrared wavelength range of 5 to 12 um. A maximum extrinsic photoresponsivity of 26 mA/W has been achieved at 12 um when the Fermi level in a 1.81° TBG is tuned to its superlattice bandgap. Moreover, the strong photoresponse critically depends on the formation of superlattice bandgap, and it vanishes in the gapless case with ultrasmall twist angle (< 0.5°). Our demonstration reveals the promising optical properties of TBG and provides an alternative material platform for tunable mid-infrared optoelectronics.

cond-mat.mes-hall

Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials

Low-symmetry 2D materials---such as ReS$_2$ and ReSe$_2$ monolayers, black phosphorus monolayers, group-IV monochalcogenide monolayers, borophene, among others---have more complex atomistic structures than the honeycomb lattices of graphene, hexagonal boron nitride, and transition metal dichalcogenides. The reduced symmetries of these emerging materials give rise to inhomogeneous electron, optical, valley, and spin responses, as well as entirely new properties such as ferroelasticity, ferroelectricity, magnetism, spin-wave phenomena, large nonlinear optical properties, photogalvanic effects, and superconductivity. Novel electronic topological properties, nonlinear elastic properties, and structural phase transformations can also take place due to low symmetry. The "Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials" Special Topic was assembled to highlight recent experimental and theoretical research on these emerging materials.

cond-mat.mes-hall

Semimetals for high performance photodetection

Semimetals are being explored for their unique advantages in low-energy high-speed photodetection, although they suffer from serious drawbacks such as an intrinsically high dark current. In this perspective, we envision the exploitation of topological effects in the photoresponse of these materials as a promising route to circumvent these problems. We overview recent studies on photodetection based on graphene and other semimetals, and further discuss the exciting opportunities created by the topological effects, along with the additional requirements that they impose on photodetector designs.

physics.app-ph

Plasmonics in Atomically-Thin Crystalline Silver Films

Light-matter interaction at the atomic scale rules fundamental phenomena such as photoemission and lasing, while enabling basic everyday technologies, including photovoltaics and optical communications. In this context, plasmons --the collective electron oscillations in conducting materials-- are important because they allow manipulating optical fields at the nanoscale. The advent of graphene and other two-dimensional crystals has pushed plasmons down to genuinely atomic dimensions, displaying appealing properties such as a large electrical tunability. However, plasmons in these materials are either too broad or lying at low frequencies, well below the technologically relevant near-infrared regime. Here we demonstrate sharp near-infrared plasmons in lithographically-patterned wafer-scale atomically-thin silver crystalline films. Our measured optical spectra reveal narrow plasmons (quality factor $\sim4$), further supported by a low sheet resistance comparable to bulk metal in few-atomic-layer silver films down to seven Ag(111) monolayers. Good crystal quality and plasmon narrowness are obtained despite the addition of a thin passivating dielectric, which renders our samples resilient to ambient conditions. The observation of spectrally sharp and strongly confined plasmons in atomically thin silver holds great potential for electro-optical modulation and optical sensing applications.

cond-mat.mes-hall

Photothermal Engineering of Graphene Plasmons

Nanoscale photothermal sources find important applications in theranostics, imaging, and catalysis. In this context, graphene offers a unique suite of optical, electrical, and thermal properties, which we exploit to show self-consistent active photothermal modulation of its nanoscale response. In particular, we predict the existence of plasmons confined to the optical landscape tailored by continuous-wave external-light pumping of homogeneous graphene. This result relies on the high electron temperatures achievable in optically pumped clean graphene while its lattice remains near ambient temperature. Our study opens a new avenue toward the active optical control of the nanophotonic response in graphene with potential application in photothermal devices.

cond-mat.mtrl-sci

Efficient Electrical Detection of Mid-Infrared Graphene Plasmons at Room Temperature

Optical excitation and subsequent decay of graphene plasmons can produce a significant increase in charge-carrier temperature. An efficient method to convert this temperature elevation into a measurable electrical signal at room temperature can enable important mid-infrared applications such as thermal sensing and imaging in ubiquitous mobile devices. However, as appealing as this goal might be, it is still unrealized due to the modest thermoelectric coefficient and weak temperature-dependence of carrier transport in graphene. Here, we demonstrate mid-infrared graphene detectors consisting of arrays of plasmonic resonators interconnected by quasi one-dimensional nanoribbons. Localized barriers associated with disorder in the nanoribbons produce a dramatic temperature dependence of carrier transport, thus enabling the electrical detection of plasmon decay in the nearby graphene resonators. We further realize a device with a subwavelength footprint of 5*5 um2 operating at 12.2 um, an external responsivity of 16 mA/W, a low noise-equivalent power of 1.3 nW/Hz1/2 at room temperature, and an operational frequency potentially beyond gigahertz. Importantly, our device is fabricated using large-scale graphene and possesses a simple two-terminal geometry, representing an essential step toward the realization of on-chip graphene mid-infrared detector arrays.

cond-mat.mes-hall

Coupling-Enhanced Broadband Mid-Infrared Light Absorption in Graphene Plasmonic Nanostructures

Plasmons in graphene nanostructures show great promise for mid-infrared applications ranging from a few to tens of microns. However, mid-infrared plasmonic resonances in graphene nanostructures are usually weak and narrow-banded, limiting their potential in light manipulation and detection. Here we investigate the coupling among graphene plasmonic nanostructures and further show that by engineering the coupling, enhancement of light-graphene interaction strength and broadening of spectral width can be achieved simultaneously. Leveraging the concept of coupling, we demonstrate a hybrid 2-layer graphene nanoribbon array which shows 5 to 7% extinction within the entire 8 to 14 μm (~700 to 1250 cm-1) wavelength range, covering one of the important atmosphere "infrared transmission windows". Such coupled hybrid graphene plasmonic nanostructures may find applications in infrared sensing and free-space communications.

cond-mat.mes-hall

Efficient Electrical Control of Thin-Film Black Phosphorus Bandgap

Recently rediscovered black phosphorus is a layered semiconductor with promising electronic and photonic properties. Dynamic control of its bandgap can enable novel device applications and allow for the exploration of new physical phenomena. However, theoretical investigations and photoemission spectroscopy experiments performed on doped black phosphorus through potassium adsorption indicate that in its few-layer form, an exceedingly large electric field in the order of several volts per nanometer is required to effectively tune its bandgap, making the direct electrical control unfeasible. Here we demonstrate the tuning of bandgap in intrinsic black phosphorus using an electric field directly and reveal the unique thickness-dependent bandgap tuning properties, arising from the strong interlayer electronic-state coupling. Furthermore, leveraging a 10-nm-thick black phosphorus in which the field-induced potential difference across the film dominates over the interlayer coupling, we continuously tune its bandgap from ~300 to below 50 milli-electron volts, using a moderate displacement field up to 1.1 volts per nanometer. Such dynamic tuning of bandgap may not only extend the operational wavelength range of tunable black phosphorus photonic devices, but also pave the way for the investigation of electrically tunable topological insulators and topological nodal semimetals.

cond-mat.mes-hall

Protective Molecular Passivation of Black Phosphorous

Black phosphorous (BP) is one of the most interesting layered materials, bearing promising potential for emerging electronic and optoelectronic device technologies. The crystalline structure of BP displays in-plane anisotropy in addition to the out-of-plane anisotropy characteristic to layered materials. Therefore, BP supports anisotropic optical and transport responses that can enable unique device architectures. Its thickness-dependent direct bandgap varies in the range of around 0.3-2.0 eV (from single-layer to bulk, respectively), making BP suitable to optoelectronics in a broad spectral range. With high room-temperature mobility, exceeding 1,000 cm2V-1s-1 in thin films, BP is also a very promising material for electronics. However, BP is sensitive to oxygen and humidity due to its three-fold coordinated atoms. The surface electron lone pairs are reactive and can lead to structural degradation upon exposure to air, leading to significant device performance degradation in ambient condition. Here, we report a viable solution to overcome degradation in few-layer BP by passivating the surface with self-assembled monolayers of octadecyltrichlorosilane (OTS) that provide long-term stability in ambient conditions. Importantly, we show that this treatment does not cause any undesired carrier doping of the bulk channel material, thanks to the emergent hierarchical interface structure. Our approach is compatible with conventional electronic materials processing technologies thus providing an immediate route toward practical applications in BP devices.

cond-mat.mtrl-sci

Black Phosphorus Mid-Infrared Photodetectors with High Gain

Recently, black phosphorus (BP) has joined the two dimensional material family as a promising candidate for photonic applications, due to its moderate bandgap, high carrier mobility, and compatibility with a diverse range of substrates. Photodetectors are probably the most explored BP photonic devices, however, their unique potential compared with other layered materials in the mid-infrared wavelength range has not been revealed. Here, we demonstrate BP mid infrared detectors at 3.39 um with high internal gain, resulting in an external responsivity of 82 A/W. Noise measurements show that such BP photodetectors are capable of sensing low intensity mid-infrared light in the picowatt range. Moreover, the high photoresponse remains effective at kilohertz modulation frequencies, because of the fast carrier dynamics arising from BPs moderate bandgap. The high photoresponse at mid infrared wavelengths and the large dynamic bandwidth, together with its unique polarization dependent response induced by low crystalline symmetry, can be coalesced to promise photonic applications such as chip-scale mid-infrared sensing and imaging at low light levels.

cond-mat.mtrl-sci

Anisotropic Black Phosphorus Synaptic Device for Neuromorphic Applications

Synapses are functional links between neurons, through which "information" flows in the neural network. These connections vary significantly in strength, typically resulting from the intrinsic heterogeneity in their chemical and biological properties. Such heterogeneity is fundamental to the diversity of neural activities, which together with other features of the brain enables functions ranging from perception and recognition, to memory and reasoning. Realizing such heterogeneity in synaptic electronics is critical towards building artificial neural network with the potential for achieving the level of complexity in biological systems. However, such intrinsic heterogeneity has been very challenging to realize in current synaptic devices. Here, we demonstrate the first black phosphorus (BP) synaptic device, which offers intrinsic anisotropy in its synaptic characteristics directly resulting from its low crystal symmetry. The charge transfer between the 2-nm native oxide of BP and the BP channel is utilized to achieve the synaptic behavior. Key features of biological synapses such as long-term plasticity with heterogeneity, including long-term potentiation/depression and spike-timing-dependent plasticity, are mimicked. With the anisotropic BP synaptic devices, we also realize a simple compact heterogeneous axon-multi-synapses network. This demonstration represents an important step towards introducing intrinsic heterogeneity to artificial neuromorphic systems.

cond-mat.mtrl-sci