arXiv subjects

Forrest Valdez

Publications and source records attributed to Forrest Valdez.

4 recordsLinked to original sources

arXiv2025

High-performance Hybrid Lithium Niobate Electro-optic Modulators Integrated with Low-loss Silicon Nitride Waveguides on a Wafer-scale Silicon Photonics Platform

Heterogeneously-integrated electro-optic modulators (EOM) are demonstrated using the hybrid-mode concept, incorporating thin-film lithium niobate (LN) by bonding with silicon nitride (SiN) passive photonics. At wavelengths near 1550 nm, these EOMs demonstrated greater than 30 dB extinction ratio, 3.8 dB on-chip insertion loss, a low-frequency half-wave voltage-length product ($V_\pi L$) of 3.8 $V.{}cm$, and a 3-dB EO modulation bandwidth exceeding 110 GHz. This work demonstrates the combination of multi-layer low-loss SiN waveguides with high-performance LN EOMs made in a scalable fabrication process using conventional low-resistivity silicon (Si) wafers.

physics.optics↗

arXiv2023

Integrated O- and C-band Silicon-Lithium Niobate Mach-Zehnder Modulators with 100 GHz Bandwidth, Low Voltage, and Low Loss

Broadband integrated thin-film lithium niobate (TFLN) electro-optic modulators (EOM) are desirable for optical communications and signal processing in both the O-band (1310 nm) and C-band (1550 nm). To address these needs, we design and demonstrate Mach-Zehnder (MZ) EOM devices in a hybrid platform based on TFLN bonded to foundry-fabricated silicon photonic waveguides. Using a single silicon lithography step and a single bonding step, we realize MZ EOM devices which cover both wavelength ranges on the same chip. The EOM devices achieve 100 GHz EO bandwidth (referenced to 1 GHz) and about 2-3 V$.$cm figure-of-merit ($V_πL$) with low on-chip optical loss in both the O-band and C-band.

physics.optics↗

arXiv2022

100 GHz Bandwidth, 1 Volt Near-infrared Electro-optic Mach-Zehnder Modulator

An integrated hybrid thin-film lithium niobate (TFLN) electro-optic Mach-Zehnder modulator (MZM) is shown at near-infrared wavelengths. The design uses TFLN bonded to planarized silicon nitride waveguide circuits, and does not require etching or patterning of TFLN. The push-pull MZM achieves a half-wave voltage length product ($V_πL$) of 0.8 V$.$cm at 784 nm. MZM devices with 0.4 cm and 0.8 cm modulation length show a broadband electro-optic response with a 3 dB bandwidth beyond 100 GHz, with the latter showing a bandwidth to half-wave voltage ratio of 100 GHz/V.

physics.optics↗

arXiv2022

110 GHz, 110 mW Hybrid Silicon-Lithium Niobate Mach-Zehnder Modulator

High bandwidth, low voltage electro-optic modulators with high optical power handling capability are important for improving the performance of analog optical communications and RF photonic links. Here we designed and fabricated a thin-film lithium niobate (LN) Mach-Zehnder modulator (MZM) which can handle high optical power of 110 mW, while having 3-dB bandwidth greater than 110 GHz at 1550 nm. The design does not require etching of thin-film LN, and uses hybrid optical modes formed by bonding LN to planarized silicon photonic waveguide circuits. A high optical power handling capability in the MZM was achieved by carefully tapering the underlying Si waveguide to reduce the impact of optically-generated carriers, while retaining a high modulation efficiency. The MZM has a $V_πL$ product of 3.1 V$.$cm and an on-chip optical insertion loss of 1.8 dB.

physics.optics↗