arXiv subjects

Francesco Bonaccorso

Publications and source records attributed to Francesco Bonaccorso.

At least 37 records · Page 2Linked to original sources

arXiv2019

Thioethyl-porphyrazine/Nanocarbon Hybrids for Photoinduced Electron Transfer

We designed a novel pyrene-substituted thioethyl-porphyrazine (PzPy) and the formation of supramolecular assembly with nanocarbons demonstrating photoinduced electron transfer ability. As revealed by spectroscopic and electrochemical studies, PzPy displays wide spectral absorption in the visible range, charge separation upon photoexcitation, as well as bandgap and highest occupied/lowest unoccupied molecular orbital (HOMO/LUMO) energy values, matching the key requirements of organic optoelectronic. Moreover, the presence of a pyrene moiety promotes attractive interactions with pi-conjugated systems. In particular, theoretical calculations show that in the PzPy the HOMO and LUMO are localized on different positions of the molecule, i.e., the HOMO on the pyrene moiety and the LUMO on the macrocycle. Therefore, HOMO-LUMO excitation gives rise to a charge separation, preventing excitons recombination. Two kinds of non-covalent hybrid composites are prepared by mixing the PzPy with single wall carbon nanotubes (SWNTs) and graphene nanoflakes (GNFs), respectively, and used for photocurrent generation through charge transfer processes between PzPy and nanocarbons. Photoconduction experiments show photocurrent generation upon visible light irradiation of both PzPy/SWNT and PzPy/GNF composites (0.78 and 0.71 mA/W at 500 nm, respectively), demonstrating their suitability for optoelectronic applications and light harvesting systems.

physics.chem-ph↗

arXiv2019

Scalable production of graphene inks via wet-jet milling exfoliation for screen-printed micro-supercapacitors

The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing methods is crucial for the widespread application of MSCs. Here, we report wet-jet milling exfoliation of graphite to scale-up the production of graphene as supercapacitor material. The formulation of aqueous/alcohol-based graphene inks allows metal-free, flexible MSCs to be screen-printed. These MSCs exhibit areal capacitance (Careal) values up to 1.324 mF cm-2 (5.296 mF cm-2 for a single electrode), corresponding to an outstanding volumetric capacitance (Cvol) of 0.490 F cm-3 (1.961 F cm-3 for a single electrode). The screen-printed MSCs can operate up to power density above 20 mW cm-2 at energy density of 0.064 uWh cm-2. The devices exhibit excellent cycling stability over charge-discharge cycling (10000 cycles), bending cycling (100 cycles at bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate-encapsulated MSCs retain their electrochemical properties after a home-laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics.

physics.app-ph↗

arXiv2019

Carbon-based Photocathode Materials for Solar Hydrogen Production

Hydrogen is considered a promising environmentally friendly energy carrier for replacing traditional fossil fuels. In this context, photoelectrochemical (PEC) cells effectively convert solar energy directly to H2 fuel by water photoelectrolysis, thereby monolitically combining the functions of both light harvesting and electrolysis. In such devices, photocathodes and photoanodes carry out hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Here, we focus on photocathodes for HER, traditionally based on metal oxides, III-V group and II-VI group semiconductors, Si and copper-based chalcogenides as photoactive material. Recently, carbon-based materials have emerged as reliable alternatives to the aforementioned materials. Here, we provide a perspective on carbon-based photocathodes, critically analysing recent research progresses and outlining the major guidelines for the development of efficient and stable photocathode architectures. In particular, we discuss the functional role of charge-selective and protective layers, which enhance both the efficiency and the durability of the photocathodes. We afford an in-depth evaluation of the state-of-the-art fabrication of photocathodes through scalable, high-troughput, cost-effective methods. The most critical issues regarding the recently developed light-trapping nanostructured architectures are also addressed. Finally, we analyse the key challenges on future research directions in terms of the potential performance and manufacturability of photocathodes.

physics.app-ph↗

arXiv2019

Doped-MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxides hybrid catalysts for pH-universal electrochemical hydrogen evolution reaction

Clean hydrogen production through efficient and cost-effective electrochemical water splitting is highly promising to meeting future global energy demands. The design of Earth-abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments summarize the outcomes needed for practical applications. Here, we report a non-noble 3d metal Cl-chemical doping of liquid phase exfoliated single/few-layer flakes of MoSe2 for creating MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxide hybrid HER-catalysts. We propose that the electron-transfer from MoSe2 nanoflakes to metal cations and the chlorine complexation-induced both neutralization, as well as the in situ formation of metal oxide-hydr(oxy)oxides on MoSe2 nanoflake's surface, tailor the proton affinity of the derived catalysts, increasing the number and HER-kinetic of their active sites in both acidic and alkaline electrolytes. The electrochemical coupling between the doped-MoSe2 nanoflakes/metal oxide-hydr(oxy)oxide hybrids and single-walled carbon nanotubes heterostructures further accelerates the HER process. Lastly, monolithic stacking of multiple heterostructures is reported as a facile electrode assembly strategy to achieve overpotential for a cathodic current density of 10mAcm-2 of 0.081V and 0.064V in 0.5M H2SO4 and 1M KOH, respectively. This opens up new opportunities to address the current density vs. overpotential requirements targeted in pH-universal H2 production.

cond-mat.mtrl-sci↗

arXiv2019

Biotransformation and biological impact of graphene and graphene oxide during simulated oral ingestion

Graphene is an innovative nanomaterial, made of two-dimensional honeycomb-like carbon lattice, with potential in many different applications. Studying the behaviour of graphene-related materials (GRMs) in biological systems is, therefore, crucial to assess possible side effects. In this work is studied the biotransformation and biological impact of few-layer pristine graphene (FLG) and graphene oxide (GOX), following ingestion as exposure route. To mimic FLG and GOX ingestion, an in vitro digestion assay based on a standardized operating procedure (SOP) is applied. The assay simulates the human ingestion of GRMs during their dynamic passage through the different environments of gastrointestinal (GI) tract (salivary, gastric, intestinal). Physical-chemical changes of GRMs during the digestion process are assessed through a detailed Raman spectroscopy characterization. Moreover, the effect of chronic exposure to digested GRMs on integrity and functionality of an in vitro model of intestinal barrier is also determined according to a second SOP. Our results showed that the FLG and GOX nanoflakes aggregates after experiencing the passage through the different environments of GI tract, with evident doping effects, due to the interaction of GRMs with digestive juice components and the strong pH variations. Interestingly, neither structural changes nor degradation of the nanomaterials is observed, suggesting that GRMs are bio-persistent nanomaterials when administered by oral route. Chronic exposure to digested GRMs does not affect intestinal barrier integrity and is not associated to inflammation and cytotoxicity, though possible long-term adverse effects cannot be ruled out, due to the observed bio-durability of the materials.

cond-mat.soft↗

arXiv2019

Liquid-phase exfoliated indium-selenide flakes and their application in hydrogen evolution reaction

Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few um, and thicknesses ranging from 1 to 20 nm, with a max population centred at ~ 5 nm, corresponding to 4 Se-In-In-Se quaternary layers. We also show that no formation of further InSe-based compounds (such as In2Se3) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. We highlight the dependence of the InSe flakes morphologies, i.e., surface area and thickness, on the HER performances achieving best efficiencies with small flakes offering predominant edge effects. Our theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes.

cond-mat.mtrl-sci↗

arXiv2019

WS2-graphite dual-ion battery

A novel WS2-graphite dual-ion battery (DIB) is developed by combining together a conventional graphite cathode and high-capacity few-layer WS2 flakes anode. The WS2 flakes are produced by exploiting wet-jet milling (WJM) exfoliation, which allows mass production of few-layer WS2 flakes in dispersion, with an exfoliation yield of 100%. The WS2-anodes enable DIBs, based on hexafluorophosphate (PF6-) and lithium (Li+) ions, to achieve charge specific capacities of 457, 438, 421, 403, 295 and 169 mAh g-1 at current rates of 0.1, 0.2, 0.3, 0.4, 0.8 and 1.0 A g-1, respectively, outperforming conventional DIBs. The WS2-based DIBs operate in the 0 to 4 V cell voltage range, thus extending the operating voltage window of conventional WS2-based Li-ion batteries (LIBs). These results demonstrate a new route towards the exploitation of WS2, and possibly other transition metal dichalcogenides (TMDs), for the development of next-generation energy storage devices.

cond-mat.mtrl-sci↗

arXiv2019

MoS2 Quantum Dot/Graphene Hybrids for Advanced Interface Engineering of CH3NH3PbI3 Perovskite Solar Cell with Efficiency over 20%

Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). Graphene and related two-dimensional materials (GRMs) are promising candidates to tune on demand the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of hybrids between molybdenum disulfide (MoS2) and reduced graphene oxide (RGO) as hole transport layer (HTL) and active buffer layer (ABL) in mesoscopic methylammonium lead iodide (CH3NH3PbI3) perovskite (MAPbI3)-based PSC. We show that zero-dimensional MoS2 quantum dots (MoS2 QDs), derived by liquid phase exfoliated MoS2 flakes, provide both hole-extraction and electron-blocking properties. In fact, on the one hand, intrinsic n-type doping-induced intra-band gap states effectively extract the holes through an electron injection mechanism. On the other hand, quantum confinement effects increase the optical band gap of MoS2 (from 1.4 eV for the flakes to > 3.2 for QDs), raising the minimum energy of its conduction band (from -4.3 eV for the flakes to -2.2 eV for QDs) above the one of conduction band of MAPbI3 (between -3.7 and -4 eV) and hindering electron collection. The van der Waals hybridization of MoS2 QDs with functionalized reduced graphene oxide (f-RGO), obtained by chemical silanization-induced linkage between RGO and (3-mercaptopropyl)trimethoxysilane, is effective to homogenize the deposition of HTLs or ABLs onto the perovskite film, since the two-dimensional (2D) nature of RGO effectively plug the pinholes of the MoS2 QDs films. Our graphene interface engineering (GIE) strategy based on van der Waals MoS2 QD/graphene hybrids enable MAPbI3-based PSCs to achieve PCE up to 20.12% (average PCE of 18.8%).

physics.app-ph↗

arXiv2018

(Co, Ni)Sn0.5 nanoparticles supported on hierarchical CN-graphene-based electrocatalysts for the oxygen reduction reaction

The synthesis of new 'Pt-free' electrocatalysts (ECs) for the oxygen reduction reaction (ORR) is reported. The ECs are characterized by a hierarchical 'core-shell' morphology; the 'core' is made of graphene, that is covered by a cratered, microporous carbon nitride (CN) 'shell'. The latter supports nanoparticles of M1 and Sn metals (M1 = Co; Ni) in 'coordination nests'. These latter are holes in the CN matrix, whose walls consist of N- and C-ligands. Two groups of ECs are studied: (i) 'pristine' ECs; and (ii) 'activated' ECs, that are obtained from the 'pristine' ECs by means of a suitable activation process (A) aimed at improving the performance in the ORR. Here is clarified the interplay existent between: (i) the chemical composition, morphology, structure and A; and (ii) the ORR performance and mechanism as a function of the pH of the environment. The resulting insights improve the fundamental understanding of this family of ECs and open the door to the devising of new preparations of 'Pt-free' ECs for the ORR, which: (i) are stabilized by a CN matrix and; (ii) exhibit an improved performance.

physics.chem-ph↗

arXiv2018

Oxygen reduction reaction electrocatalysts based on FeSn0.5 species embedded in hierarchical CN-graphene based supports

This work reports the synthesis, the physicochemical characterization and the electrochemical studies of new electrocatalysts (ECs) for the oxygen reduction reaction (ORR) that: (i) are based on a hierarchical graphene-based support; and (ii) do not comprise platinum. The active sites of the ECs consist of Fe and Sn species stabilized in 'coordination nests' of a carbon nitride (CN) matrix. The latter exhibits a rough, microporous morphology and acts as a 'shell' covering a graphene 'core'. This paper: (i) discusses the role played by Fe as the 'active metal' in this family of ECs; and (ii) examines in detail how the physicochemical properties and, correspondingly, the electrochemical performance are affected by a suitable activation procedure A meant to boost the ORR kinetics. The results lead to an improved fundamental understanding on the features of the active sites, including the impact of both A and the pH of the environment in their performance and ORR mechanism. These insights clarify the most desirable features to be included in high-performing ECs belonging to this family, paving the way to the synthesis of next-generation, efficient ECs for the ORR that do not comprise platinum.

physics.chem-ph↗

arXiv2018

Towards 'Pt-free' Anion-Exchange Membrane Fuel Cells: Fe-Sn Carbon Nitride-Graphene 'Core-Shell' Electrocatalysts for the Oxygen Reduction Reaction

We report on the development of two new Pt-free electrocatalysts (ECs) for the oxygen reduction reaction (ORR) based on graphene nanoplatelets (GNPs). We designed the ECs with a core-shell morphology, where a GNP core support is covered by a carbon nitride (CN) shell. The proposed ECs present ORR active sites that are not associated to nanoparticles of metal/alloy/oxide, but are instead based on Fe and Sn sub-nanometric clusters bound in coordination nests formed by carbon and nitrogen ligands of the CN shell. The performance and reaction mechanism of the ECs in the ORR are evaluated in an alkaline medium by cyclic voltammetry with the thin-film rotating ring-disk approach and confirmed by measurements on gas-diffusion electrodes. The proposed GNP-supported ECs present an ORR overpotential of only ca. 70 mV higher with respect to a conventional Pt/C reference EC including a XC-72R carbon black support. These results make the reported ECs very promising for application in anion-exchange membrane fuel cells. Moreover, our methodology provides an example of a general synthesis protocol for the development of new Pt-free ECs for the ORR having ample room for further performance improvement beyond the state of the art.

physics.chem-ph↗

arXiv2018

Temperature Dependent Separation of Metallic and Semiconducting Carbon

Post-synthesis separation between metallic (m-SWNTs) and semiconducting (s-SWNTs) singlewall carbon nanotubes (SWNTs) is remaining a challenging process for the reliable fabrication of high performance electronic devices. Gel agarose chromatography is emerging as an efficient and large scale separation technique. However, the full (100%) separation of m-SWNTs and s-SWNTs has not been reached yet, mainly due to the lack of understanding of the separation mechanism. Here we study the temperature effect on the separation via gel agarose chromatography by varying the separation process temperatures between 6C and 50C, for four different SWNT sources. Exploiting the gel agarose micro-beads filtration technique we achieved up to 70% m-SWNTs and more than 90% s-SWNTs, independent of the source material. The process is temperature dependent, with improved yields up to 95% for s-SWNT (HiPco) at 6C. Temperature affects the sodium dodecyl sulfate SDS surfactant-micelle distribution along the SWNT sidewalls, thus helping to act as an aid in the sorting of SWNTs by electronic type. The sorted SWNTs are then used to fabricate transistors with very low OFF-currents (10^-13 A), high ON/OFF current ratio (>10^6) and improved charge carriers mobility.

cond-mat.mtrl-sci↗

arXiv2018

Exfoliation of Few-Layer Black Phosphorus in Low-Boiling-Point Solvents and Its Application in Li-Ion Batteries

The liquid-phase exfoliation (LPE) of black phosphorus (BP) is a strategic route for the large-scale production of phosphorene and few-layer BP (FL-BP) flakes. The exploitation of this exfoliated material in cutting-edge technologies, e.g., in flexible electronics and energy storage, is however limited by the fact that the LPE of BP is usually carried out at a high boiling point and in toxic solvents. In fact, the solvent residual is detrimental to device performance in real applications; thus, complete solvent removal is critical. Here, we tackle these issues by exfoliating BP in different low boiling-point solvents. Among these solvents, we find that acetone also provides a high concentration of exfoliated BP, leading to the production of FL-BP flakes with an average lateral size and thickness of c.a. 30 and 7 nm, respectively. The use of acetone to produce less defective few-layer BP flakes (FL-BPacetone) from bulk crystals is a straightforward process which enables the rapid preparation of homogeneous thin films thanks to the fast solvent evaporation. The ratio of edge to bulk atoms for the BP flakes here produced, combined with the use of low-boiling-point solvents for the exfoliation process suggests that these thin films are promising anodes for lithium-ion batteries. To this end, we tested Li-ion half cells with FL-BPacetone anodes achieving a reversible specific capacity of 480 mAh/g at a current density of 100 mA/g, over 100 charge/discharge cycles. Moreover, a reversible specific capacity of 345 mAh/g is achieved for the FL-BPacetone-based anode at a high current density (i.e., 1 A/g). These findings indicate that the FL-BPacetone-based battery is promising with regards to the design of fast charge/discharge devices. Overall, the presented process is a step forward toward the fabrication of phosphorene-based devices.

cond-mat.mtrl-sci↗

arXiv2018

Ruthenium Tetrazole-Based Electroluminescent Device: The Key Role of Counter-Ions for the Light Emission Properties

Light-emitting electrochemical cells (LECs), thanks to their simple device structure and the tunable emission wavelength of the light-emitting layer, are emerging as a class of electrochemical device candidate for the development of next-generation solid-state lighting. The possibility to tune on-demand the energy levels of Ruthenium(II) polypyridyl complexes, makes them ideal candidates as light-emitting layer. However, the optimization of the latter is not trivial and several issues, such as charge injection and electron and hole transport, have still to be solved to enhance the LEC performances. Here, we demonstrate how the exploitation of small counter anion (BF4-) enhances the light emission performance of ruthenium tetrazole complexes in light-emitting diodes. In comparison with neutral ruthenium tetrazole complexes, cationic Ru tetrazole ones, containing BF4- ion, show a reduction of turn-on voltage from7 to 5 V, at high luminous efficiency (1.49 cd/A) and applied voltage of 12 V, and a twofold improvement of the luminance. Moreover, complexes containing BF4- counter ion show better stability of luminance over time than other complexes without counter ion.

cond-mat.mtrl-sci↗

arXiv2018

Solution blending preparation of polycarbonate/graphene composite: boosting the mechanical and electrical properties

We report on the preparation of polycarbonate-based graphene (PC/G) composites, by using a simple and scalable solution blending method to disperse single (SLG) and few layer (FLG) graphene flakes, prepared by liquid phase exfoliation (LPE), in the polymer matrix. A solvent-exchange process is carried out to re-disperse the exfoliated SLG/FLG flakes in an environmentally friendly solvent, i.e. 1,3dioxolane, which is also used to dissolve the polycarbonate pellets, thus facilitating the mixing of the polymer dispersion with the SLG/FLG flakes. The loading of SLG/FLG flakes improves the mechanical and thermal properties, as well as the electrical conductivity of the polymer, reaching a +26% improvement of the elastic modulus at 1 wt% loading, and an electrical conductivity 10^-3 S m^-1 at 10 wt% with a percolation threshold achieved at 0.55 vol%. The as-prepared PC/G composite with the aforementioned reinforced properties can be a promising material for 3D printing-based applications.

cond-mat.mtrl-sci↗

arXiv2018

Solution-processed hybrid graphene flake/2H-MoS2 quantum dot heterostructures for efficient electrochemical hydrogen evolution

We designed solution-processed, flexible hybrid graphene flake/2H-MoS2 quantum dot (QD) heterostructures, showing enhanced electrocatalytic activity for the hydrogen evolution reaction (HER) with respect to their native individual components. The 2H-MoS2 QDs are produced through a scalable, environmentally friendly, one-step solvothermal approach from two-dimensional (2D) 2H-MoS2 flakes obtained by liquid phase exfoliation (LPE) of their bulk counterpart in 2-Propanol. This QDs synthesis avoids the use of high boiling point and/or toxic solvents. Graphene flakes are produced by LPE of graphite in N-Methyl-2-pyrrolidone. The electrochemical properties of 2H-MoS2 QDs and their HER-favorable chemical and electronic coupling with graphene enable to reach a current density of 10 mA/cm^2 at an overpotential of 136 mV, surpassing the performances of graphene flake/2H-MoS2 (1T-MoS2) flake heterostructures. Our approach provides a shortcut, viable and cost-effective method for enhancing the 2D materials electrocatalytic properties.

cond-mat.mtrl-sci↗

arXiv2018

Graphene-Based Hole Selective Layers for High-Efficiency, Solution-Processed, Large-Area, Flexible, Hydrogen-Evolving Organic Photocathodes

Regio-regular poly(3-hexylthiophene-2,5-diyl) (rr-P3HT), the work-horse of organic photovoltaics, has been recently exploited in bulk heterojunction (BHJ) configuration with phenyl-C61-butyric acid methyl ester (PCBM) for solution-processed hydrogen-evolving photocathodes, reaching cathodic photocurrents at 0 V vs. RHE (J0V vs RHE) of up to 8 mA cm-2. The photoelectrochemical performance of these photocathodes strongly depends on the presence of the electron (ESL) and hole (HSL) selective layer. While TiO2 and its sub-stoichiometric phases are consolidated ESL materials, the currently used HSLs (e.g., MoO3, CuI, PEDOTT:PSS, WO3) suffer electrochemical degradation under hydrogen evolution reaction (HER)-working conditions. In this work, we use solution-processed graphene derivatives as HSL to boost efficiency and durability of rr-P3HT:PCBM-based photocathodes, demonstrating record-high performance. In fact, our devices show cathodic J0V vs RHE of 6.01 mA cm-2, onset potential (Vo) of 0.6 V vs. RHE, ratiometric power-saved efficiency (ϕsaved) of 1.11% and operational activity of 20 hours in 0.5 M H2SO4 solution. Moreover, the designed photocathodes are effectively working in different pH environments ranging from acid to basic. This is pivotal for their exploitation in tandem configurations, where photoanodes operate only in restricted electrochemical conditions. Furthermore, we demonstrate the scalability of our all-solution processed approach by fabricating a large-area (~9 cm2) photocathode on flexible substrate, achieving remarkable cathodic J0V vs RHE of 2.8 mA cm-2, Vo of 0.45 V vs. RHE and ϕsaved of 0.31%. This is the first demonstration of high-efficient rr-P3HT:PCBM flexible photocathodes based on low-cost and solution-processed manufacturing techniques.

physics.app-ph↗

arXiv2018

Few-layer MoS2 flakes as hole-selective layer for solution-processed hybrid organic hydrogen-evolving photocathodes

High-efficiency organic photocathodes, based on regioregular poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (rr-P3HT:PCBM) bulk heterojunction sandwiched between charge-selective layers, are emerging as efficient and low-cost devices for solar hydrogen production by water splitting. Nevertheless, stability issues of the materials used as charge-selective layers are hampering the realization of long-lasting photoelectrodes, pointing out the need to investigate novel and stable materials. Here, we propose MoS2 nano-flakes, produced by Li-aided exfoliation of bulk counterpart, as efficient atomic-thick hole-selective layer for rr-P3HT:PCBM-based photocathodes. We carried out a p-type chemical doping to tune on-demand the MoS2 Fermi level in order to match the highest occupied molecular orbital level of the rr-P3HT, thus easing the hole collection at the electrode. The as-prepared p-doped MoS2-based photocathodes reached a photocurrent of 1.21 mA cm-2 at 0 V vs. RHE, a positive onset potential of 0.56 V vs. RHE and a power-saved figure of merit of 0.43%, showing a 6.1-fold increase with respect to pristine MoS2-based photocathodes, under simulated 1 Sun illumination. Operational activity of the photocathodes over time and under 1 Sun illumination revealed a progressive stabilization of the photocurrents at 0.49 mA cm-2 at 0 V vs. RHE. These results pave the way towards the exploitation of layered crystals as efficiency-boosters for scalable hybrid organic H2-evolving photoelectrochemical cells.

physics.app-ph↗