arXiv subjects

Francesco Fogliano

Publications and source records attributed to Francesco Fogliano.

6 recordsLinked to original sources

arXiv2026

Unresolved-Sideband Optomechanics with Hexagonal Boron Nitride: Induced Transparency, Gain, and Frequency Combs

Optomechanically induced transparency (OMIT) is usually modeled and studied in the resolved-sideband regime, but many compact microcavity platforms operate in the unresolved-sideband limit $(κ\gg Ω_m)$. Here we investigate OMIT in this regime using a tunable fiber-based Fabry-Perot microcavity coupled to a suspended hexagonal boron nitride (hBN) drum resonator in a membrane-in-the-middle geometry. The system achieves a large single-photon coupling rate of $g_0/2π\sim 180$ kHz and exhibits strong radiation-pressure backaction. By measuring OMIT spectra as a function of pump power and cavity detuning, we observe a crossover from a transparency-like dip to a gain feature in the reflected response. These maps are quantitatively reproduced by the full linearized optomechanical response, demonstrating the breakdown of the standard rotating-wave approximation used in the resolved-sideband limit. Finally, we drive the system into a nonlinear regime to generate optomechanical frequency combs. These results establish hBN fiber-cavities as a versatile architecture for unresolved-sideband optomechanics, nonlinear dynamics, and hybrid device integration.

physics.optics↗

arXiv2023

Mechanical mode imaging of a high-Q hybrid hBN/Si$_3$N$_4$ resonator

We image and characterize the mechanical modes of a 2D drum resonator made of hBN suspended over a high-stress Si$_3$N$_4$ membrane. Our measurements demonstrate hybridization between various modes of the hBN resonator and those of the Si$_3$N$_4$ membrane. The measured resonance frequencies and spatial profiles of the modes are consistent with finite-element simulations based on an idealized geometry. Spectra of the thermal motion reveal that, depending on the degree of hybridization with modes of the heavier and higher-quality-factor Si$_3$N$_4$ membrane, the quality factors and the motional mass of the hBN drum modes can be shifted by orders of magnitude. This effect could be exploited to engineer hybrid drum/membrane modes that combine the low motional mass of 2D materials with the high quality factor of Si$_3$N$_4$ membranes for optomechanical or sensing applications.

cond-mat.mes-hall↗

arXiv2022

Cavity nano-optomechanics with suspended subwavelength-sized nanowires

In the field of cavity nano-optomechanics, the nanoresonator-in-the-middle approach consists in inserting a sub-wavelength sized deformable resonator, here a nanowire, in the small mode volume of a fiber microcavity. Internal resonances in the nanowire enhance the light nanowire interaction which provide giant coupling strengthes -- sufficient to enter the single photon regime of cavity optomechanics -- at the condition to precisely position the nanowire within the cavity field. Here we expose a theoretical description that combines an analytical formulation of the Mie-scattering of the intracavity light by the nanowire and an input-output formalism describing the dynamics of the intracavity optical eigenmodes. We investigate both facets of the optomechanical interaction describing the position dependent parametric and dissipative optomechanical coupling strengths, as well as the optomechanical force field experienced by the nanowire. We find a quantitative agreement with recent experimental realization. We discuss the specific phenomenology of the optomechanical interaction which acquires a vectorial character since the nanowire can identically vibrate along both transverse directions: the optomechanical force field presents a non-zero rotational, while anomalous positive cavity shifts are expected. Taking advantage of the large Kerr-like non linearity, this work opens perspectives in the field of quantum optics with nanoresonator with for instance broadband squeezing of the outgoing cavity fields close to the single photon level.

quant-ph↗

arXiv2022

A tunable fiber Fabry-Perot cavity for hybrid optomechanics stabilized at 4 K

We describe an apparatus for the implementation of hybrid optomechanical systems at 4 K. The platform is based on a high-finesse, micrometer-scale fiber Fabry-Perot cavity, which can be widely tuned using piezoelectric positioners. A mechanical resonator can be positioned within the cavity in the object-in-the-middle configuration by a second set of positioners. A high level of stability is achieved without sacrificing either performance or tunability, through the combination of a stiff mechanical design, passive vibration isolation, and an active Pound-Drever-Hall feedback lock incorporating a reconfigurable digital filter. The stability of the cavity length is demonstrated to be better than a few picometers over many hours both at room temperature and at 4 K.

physics.optics↗

arXiv2020

Ultrasensitive nano-optomechanical force sensor at dilution temperatures

Cooling down nanomechanical force probes is a generic strategy to enhance their sensitivities through the concomitant reduction of their thermal noise and mechanical damping rates. However, heat conduction mechanisms become less efficient at low temperatures, which renders difficult to ensure and verify their proper thermalization. To operate with minimally perturbing measurements, we implement optomechanical readout techniques operating in the photon counting regime to probe the dynamics of suspended silicon carbide nanowires in a dilution refrigerator. Readout of their vibrations is realized with sub-picowatt optical powers, in a regime where less than one photon is collected per oscillation period. We demonstrate their thermalization down to $32\pm2$ mK and report on record sensitivities for scanning probe force sensors, at the $40\,\rm zN/Hz^{1/2}$ level, with a sensitivity to lateral force field gradients in the fN/m range. This work opens the road toward nanomechanical vectorial imaging of faint forces at dilution temperatures, at minimal excitation levels.

cond-mat.mes-hall↗

arXiv2019

Cavity nano-optomechanics in the ultrastrong coupling regime with ultrasensitive force sensors

In a canonical optomechanical system, mechanical vibrations are dynamically encoded on an optical probe field which reciprocally exerts a backaction force. Due to the weak single photon coupling strength achieved with macroscopic oscillators, most of existing experiments were conducted with large photon numbers to achieve sizeable effects, thereby causing a dilution of the original optomechanical non-linearity. Here, we investigate the optomechanical interaction of an ultrasensitive suspended nanowire inserted in a fiber-based microcavity mode. This implementation allows to enter far into the hitherto unexplored ultrastrong optomechanical coupling regime, where one single intracavity photon can displace the oscillator by more than its zero point fluctuations. To fully characterize our system, we implement nanowire-based scanning probe measurements to map the vectorial optomechanical coupling strength, but also to reveal the intracavity optomechanical force field experienced by the nanowire. This work establishes that the single photon cavity optomechanics regime is within experimental reach.

quant-ph↗