arXiv subjects

Frank P. Payne

Publications and source records attributed to Frank P. Payne.

4 recordsLinked to original sources

arXiv2026

Sapphire Photonic Crystal Fiber Sensor

Sapphire optical fiber shows great promise for remote sensing in extreme environments approaching 2000 degC, by using laser-processing to form a single-mode waveguide within it. However, for practical application, longer devices with high manufacturability and reliability are required. We report the design, modeling, fabrication, and optimization of an index-guiding sapphire photonic crystal fiber Bragg grating temperature sensor. The device is fabricated using femtosecond laser direct writing to inscribe both the photonic crystal waveguide and the Bragg grating. A spatial light modulator was used to compensate for the mismatch between the immersion objective and the high-index oil used. This improved the aspect ratio and suppressed cracking during fabrication, for higher reliability. The design results in a 6-fold reduction in fabrication time over an equivalent depressed cladding waveguide, significantly reducing the cost of manufacture. Devices up to 7 cm long were fabricated and spliced to standard single-mode fiber. The propagation loss was estimated to be 0.7 dB/cm and the Bragg gratings had a bandwidth of approximately 0.12 nm. Devices were tested in a furnace showing a temperature sensitivity of between 19.0-32.3 pm/degC over a range 25-1200 degC. These longer devices have the potential to enable practical high precision extreme temperature monitoring in many applications, with lower manufacturing cost and higher reliability.

physics.optics↗

arXiv2024

Laser-written scalable sapphire integrated photonics platform

In this paper, we demonstrate the integration of photonic devices on sapphire substrates using multi-layer depressed cladding waveguides at both 780 nm and 1550 nm. The devices are up to 10-cm long and written at depths down to 400 um. The propagation losses for single-mode guiding are ~ 0.6 dB/cm at 780 nm and ~ 0.7 dB/cm at 1550 nm. A number of structures have been fabricated with simultaneous single-mode and polarization independent operation: evanescently coupled waveguide arrays, Y-branch splitters, Mach-Zehnder interferometers, and a 2x2 directional-coupler. All the devices were fabricated using adaptive optics-assisted femtosecond laser direct writing with a customized laser writing algorithm. This work enables the integration of single-mode sapphire photonics devices in a scalable manner, enabling many applications in communications, imaging, computing, and sensing.

physics.optics↗

arXiv2023

High-precision optical fiber sensing beyond 1000°C

Sapphire fiber can withstand around 2000°C, but it is multimoded, giving poor precision sensors. We demonstrate a single-mode sapphire fiber Bragg grating temperature sensor operating up to 1200°C. The repeatability above 1000°C is within {\pm}0.08%.

physics.optics↗

arXiv2021

Single-mode sapphire fiber Bragg grating

We present here the inscription of single-mode waveguides with Bragg gratings in sapphire. The waveguide Bragg gratings have a novel multi-layer depressed cladding design in the 1550 nm telecommunications waveband. The Bragg gratings have a narrow bandwidth (<0.5 nm) and have survived annealing at 1000°C. The structures are inscribed with femtosecond laser direct writing, using adaptive beam shaping with a non-immersion objective. A single-mode sapphire fiber Bragg grating is created by writing a waveguide with a Bragg grating within a 425 μm diameter sapphire optical fiber, providing significant potential for accurate remote sensing in ultra-extreme environments.

physics.optics↗