arXiv subjects

Futian Liang

Publications and source records attributed to Futian Liang.

At least 19 recordsLinked to original sources

arXiv2026

High fidelity control of superconducting qubits with optical transmitted signal

Superconducting circuits exhibit remarkable potential for constructing large-scale quantum simulation and computation systems, featuring numerous qubits, extended coherence time, and precise control. Nevertheless, the growing number of signal cables poses a challenge in dilution refrigerators due to space and heat load constraints. To overcome this issue, we experimentally implemented an optically-assisted transmission line as an alternative to coaxial cables. By modulating microwave signals on laser intensities at room temperature and regenerating the signals at a cryogenic plate within the dilution refrigerator, we demonstrated full control of superconducting qubits using photocurrent. We demonstrate and benchmark both single-qubit and two-qubit gates on frequency tunable transmon qubits, achieving fidelities of 99.915% $\pm$ 0.005% and 99.676% $\pm$ 0.041%, respectively, which have reached the requirement of the surface code.

quant-ph↗

arXiv2026

Surface code logical operations on a superconducting quantum processor

Fault-tolerant quantum computation requires logical operations that manipulate encoded information while preserving quantum error-correction protection. In planar surface-code architectures, code deformation and lattice surgery provide a local, measurement-based route to such operations. Here we experimentally realize key elements of patch-based surface-code logical processing on a 107-qubit superconducting quantum processor. We first implement a reusable primitive layer comprising merge and split, patch expansion and shrinkage, and deformations mediated by domain walls and twist defects. We then compose these primitives to realize logical state routing, the logical controlled-NOT gate, and the single-qubit Hadamard and phase gates, which together form a Clifford-generating set. All operations are implemented on distance-three rotated surface-code patches with multi-round syndrome extraction and neural-network decoding, without post-selection. Our results advance superconducting surface-code experiments from protected logical memory to active, patch-based fault-tolerant logical operations.

quant-ph↗

arXiv2025

Generation of 95-qubit genuine entanglement and verification of symmetry-protected topological phases

Symmetry-protected topological (SPT) phases are fundamental features of cluster states, serving as key resources for measurement-based quantum computation (MBQC). Generating large-scale cluster states and verifying their SPT phases are essential steps toward practical MBQC, which however still presents significant experimental challenges. In this work, we address these challenges by utilizing advanced superconducting hardware with optimized gate operations, enhanced readout fidelity, and error mitigation techniques. We successfully generate and verify 95-qubit one-dimensional and 72-qubit two-dimensional genuine entangled cluster states, achieving fidelities of $0.5603 \pm 0.0084$ and $0.5519 \pm 0.0054$, respectively. Leveraging these high-fidelity cluster states, we investigate SPT phases through quantum teleportation across all 95 qubits and demonstrate input-state-dependent robustness against symmetry-breaking perturbations, highlighting the practicality and intrinsic robustness of MBQC enabled by the SPT order. Our results represent a significant advancement in large-scale entanglement generation and topological phase simulation, laying the foundation for scalable and practical MBQC using superconducting quantum systems.

quant-ph↗

arXiv2024

Establishing a New Benchmark in Quantum Computational Advantage with 105-qubit Zuchongzhi 3.0 Processor

In the relentless pursuit of quantum computational advantage, we present a significant advancement with the development of Zuchongzhi 3.0. This superconducting quantum computer prototype, comprising 105 qubits, achieves high operational fidelities, with single-qubit gates, two-qubit gates, and readout fidelity at 99.90%, 99.62% and 99.18%, respectively. Our experiments with an 83-qubit, 32-cycle random circuit sampling on Zuchongzhi 3.0 highlight its superior performance, achieving one million samples in just a few hundred seconds. This task is estimated to be infeasible on the most powerful classical supercomputers, Frontier, which would require approximately $6.4\times 10^9$ years to replicate the task. This leap in processing power places the classical simulation cost six orders of magnitude beyond Google's SYC-67 and SYC-70 experiments [Nature 634, 328(2024)], firmly establishing a new benchmark in quantum computational advantage. Our work not only advances the frontiers of quantum computing but also lays the groundwork for a new era where quantum processors play an essential role in tackling sophisticated real-world challenges.

quant-ph↗

arXiv2024

Experimental quantum computational chemistry with optimised unitary coupled cluster ansatz

Quantum computational chemistry has emerged as an important application of quantum computing. Hybrid quantum-classical computing methods, such as variational quantum eigensolvers (VQE), have been designed as promising solutions to quantum chemistry problems, yet challenges due to theoretical complexity and experimental imperfections hinder progress in achieving reliable and accurate results. Experimental works for solving electronic structures are consequently still restricted to nonscalable (hardware efficient) or classically simulable (Hartree-Fock) ansatz, or limited to a few qubits with large errors. The experimental realisation of scalable and high-precision quantum chemistry simulation remains elusive. Here, we address the critical challenges {associated with} solving molecular electronic structures using noisy quantum processors. Our protocol presents significant improvements in the circuit depth and running time, key metrics for chemistry simulation. Through systematic hardware enhancements and the integration of error mitigation techniques, we push forward the limit of experimental quantum computational chemistry and successfully scale up the implementation of VQE with an optimised unitary coupled-cluster ansatz to 12 qubits. We produce high-precision results of the ground-state energy for molecules with error suppression by around two orders of magnitude. We achieve chemical accuracy for H$_2$ at all bond distances and LiH at small bond distances in the experiment, even beyond the two recent concurrent works. Our work demonstrates a feasible path towards a scalable solution to electronic structure calculation, validating the key technological features and identifying future challenges for this goal.

quant-ph↗

arXiv2024

The 120Gbps VCSEL Array Based Optical Transmitter (ATx) Development for the High-Luminosity LHC (HL-LHC) Experiments

The integration of a Verticle Cavity Surface-Emitting Laser (VCSEL) array and a driving Application-Specific Integrated Circuit (ASIC) in a custom optical array transmitter module (ATx) for operation in the detector front-end is constructed, assembled and tested. The ATx provides 12 parallel channels with each channel operating at 10 Gbps. The optical transmitter eye diagram passes the eye mask and the bit-error rate (BER) less than 1E-12 transmission is achieved at 10 Gbps/ch. The overall insertion loss including the radiation induced attenuation is sufficiently low to meet the proposed link budget requirement.

physics.ins-det↗

arXiv2024

Optical Data Transmission ASICs for the High-Luminosity LHC (HL-LHC) Experiments

We present the design and test results of two optical data transmission ASICs for the High-Luminosity LHC (HL-LHC) experiments. These ASICs include a two-channel serializer (LOCs2) and a single-channel Vertical Cavity Surface Emitting Laser (VCSEL) driver (LOCld1V2). Both ASICs are fabricated in a commercial 0.25-um Silicon-on-Sapphire (SoS) CMOS technology and operate at a data rate up to 8 Gbps per channel. The power consumption of LOCs2 and LOCld1V2 are 1.25 W and 0.27 W at 8-Gbps data rate, respectively. LOCld1V2 has been verified meeting the radiation-tolerance requirements for HL-LHC experiments.

physics.ins-det↗

arXiv2023

Logical Magic State Preparation with Fidelity Beyond the Distillation Threshold on a Superconducting Quantum Processor

Fault-tolerant quantum computing based on surface code has emerged as an attractive candidate for practical large-scale quantum computers to achieve robust noise resistance. To achieve universality, magic states preparation is a commonly approach for introducing non-Clifford gates. Here, we present a hardware-efficient and scalable protocol for arbitrary logical state preparation for the rotated surface code, and further experimentally implement it on the \textit{Zuchongzhi} 2.1 superconducting quantum processor. An average of \hhl{$0.8983 \pm 0.0002$} logical fidelity at different logical states with distance-three is achieved, \hhl{taking into account both state preparation and measurement errors.} In particular, \hhl{the magic states $|A^{π/4}\rangle_L$, $|H\rangle_L$, and $|T\rangle_L$ are prepared non-destructively with logical fidelities of $0.8771 \pm 0.0009 $, $0.9090 \pm 0.0009 $, and $0.8890 \pm 0.0010$, respectively, which are higher than the state distillation protocol threshold, 0.859 (for H-type magic state) and 0.827 (for T -type magic state).} Our work provides a viable and efficient avenue for generating high-fidelity raw logical magic states, which is essential for realizing non-Clifford logical gates in the surface code.

quant-ph↗

arXiv2023

Experimental Simulation of Larger Quantum Circuits with Fewer Superconducting Qubits

Although near-term quantum computing devices are still limited by the quantity and quality of qubits in the so-called NISQ era, quantum computational advantage has been experimentally demonstrated. Moreover, hybrid architectures of quantum and classical computing have become the main paradigm for exhibiting NISQ applications, where low-depth quantum circuits are repeatedly applied. In order to further scale up the problem size solvable by the NISQ devices, it is also possible to reduce the number of physical qubits by "cutting" the quantum circuit into different pieces. In this work, we experimentally demonstrated a circuit-cutting method for simulating quantum circuits involving many logical qubits, using only a few physical superconducting qubits. By exploiting the symmetry of linear-cluster states, we can estimate the effectiveness of circuit-cutting for simulating up to 33-qubit linear-cluster states, using at most 4 physical qubits for each subcircuit. Specifically, for the 12-qubit linear-cluster state, we found that the experimental fidelity bound can reach as much as 0.734, which is about 19\% higher than a direct simulation {on the same} 12-qubit superconducting processor. Our results indicate that circuit-cutting represents a feasible approach of simulating quantum circuits using much fewer qubits, while achieving a much higher circuit fidelity.

quant-ph↗

arXiv2022

Quantum Neuronal Sensing of Quantum Many-Body States on a 61-Qubit Programmable Superconducting Processor

Classifying many-body quantum states with distinct properties and phases of matter is one of the most fundamental tasks in quantum many-body physics. However, due to the exponential complexity that emerges from the enormous numbers of interacting particles, classifying large-scale quantum states has been extremely challenging for classical approaches. Here, we propose a new approach called quantum neuronal sensing. Utilizing a 61 qubit superconducting quantum processor, we show that our scheme can efficiently classify two different types of many-body phenomena: namely the ergodic and localized phases of matter. Our quantum neuronal sensing process allows us to extract the necessary information coming from the statistical characteristics of the eigenspectrum to distinguish these phases of matter by measuring only one qubit. Our work demonstrates the feasibility and scalability of quantum neuronal sensing for near-term quantum processors and opens new avenues for exploring quantum many-body phenomena in larger-scale systems.

quant-ph↗

arXiv2022

Realization of fast all-microwave CZ gates with a tunable coupler

The development of high-fidelity two-qubit quantum gates is essential for digital quantum computing. Here, we propose and realize an all-microwave parametric Controlled-Z (CZ) gates by coupling strength modulation in a superconducting Transmon qubit system with tunable couplers. After optimizing the design of the tunable coupler together with the control pulse numerically, we experimentally realized a 100 ns CZ gate with high fidelity of 99.38%$ \pm$0.34% and the control error being 0.1%. We note that our CZ gates are not affected by pulse distortion and do not need pulse correction, {providing a solution for the real-time pulse generation in a dynamic quantum feedback circuit}. With the expectation of utilizing our all-microwave control scheme to reduce the number of control lines through frequency multiplexing in the future, our scheme draws a blueprint for the high-integrable quantum hardware design.

quant-ph↗

arXiv2022

Ruling out real-valued standard formalism of quantum theory

Standard quantum theory was formulated with complex-valued Schrodinger equations, wave functions, operators, and Hilbert spaces. Previous work attempted to simulate quantum systems using only real numbers by exploiting an enlarged Hilbert space. A fundamental question arises: are complex numbers really necessary in the standard formalism of quantum theory? To answer this question, a quantum game has been developed to distinguish standard quantum theory from its real-number analog by revealing a contradiction in the maximum game scores between a high-fidelity multi-qubit quantum experiment and players using only real-number quantum theory. Here, using superconducting qubits, we faithfully experimentally implement the quantum game based on entanglement swapping with a state-of-the-art fidelity of 0.952(1), which beats the real-number bound of 7.66 by 43 standard deviations. Our results disprove the real-number formulation and establish the indispensable role of complex numbers in the standard quantum theory.

quant-ph↗

arXiv2022

The Miniature Optical Transmitter and Transceiver For the High-Luminosity LHC (HL-LHC) experiments

We present the design and test results of the Miniature optical Transmitter (MTx) and Transceiver (MTRx) for the high luminosity LHC (HL-LHC) experiments. MTx and MTRx are Transmitter Optical Subassembly (TOSA) and Receiver Optical Subassembly (ROSA) based. There are two major developments: the Vertical Cavity Surface Emitting Laser (VCSEL) driver ASIC LOCld and the mechanical latch that provides the connection to fibers. In this paper, we concentrate on the justification of this work, the design of the latch and the test results of these two modules with a Commercial Off-The-Shelf (COTS) VCSEL driver.

physics.ins-det↗

arXiv2022

Component Prototypes towards a Low-Latency, Small-form-factor Optical Link for the ATLAS Liquid Argon Calorimeter Phase-I Trigger Upgrade

This paper presents several component prototypes towards a low-latency, small-form-factor optical link designed for the ATLAS Liquid Argon Calorimeter Phase-I trigger upgrade. A prototype of the custom-made dual-channel optical transmitter module, the Miniature optical Transmitter (MTx), with separate transmitter optical sub-assemblies (TOSAs) has been demonstrated at data rates up to 8 Gbps per channel. A Vertical-Cavity Surface-Emitting Laser (VCSEL) driver ASIC has been developed and is used in the current MTx prototypes. A serializer ASIC prototype, operating at up to 8 Gbps per channel, has been designed and tested. A low-latency, low-overhead encoder ASIC prototype has been designed and tested. The latency of the whole link, including the transmitter latency and the receiver latency but not the latency of the fiber, is estimated to be less than 57.9 ns. The size of the MTx is 45 mm x 15 mm x 6 mm.

physics.ins-det↗

arXiv2022

Realization of an Error-Correcting Surface Code with Superconducting Qubits

Quantum error correction is a critical technique for transitioning from noisy intermediate-scale quantum (NISQ) devices to fully fledged quantum computers. The surface code, which has a high threshold error rate, is the leading quantum error correction code for two-dimensional grid architecture. So far, the repeated error correction capability of the surface code has not been realized experimentally. Here, we experimentally implement an error-correcting surface code, the distance-3 surface code which consists of 17 qubits, on the \textit{Zuchongzhi} 2.1 superconducting quantum processor. By executing several consecutive error correction cycles, the logical error can be significantly reduced after applying corrections, achieving the repeated error correction of surface code for the first time. This experiment represents a fully functional instance of an error-correcting surface code, providing a key step on the path towards scalable fault-tolerant quantum computing.

quant-ph↗

arXiv2021

Realization of high-fidelity CZ gates in extensible superconducting qubits design with a tunable coupler

High-fidelity two-qubits gates are essential for the realization of large-scale quantum computation and simulation. Tunable coupler design is used to reduce the problem of parasitic coupling and frequency crowding in many-qubit systems and thus thought to be advantageous. Here we design a extensible 5-qubit system in which center transmon qubit can couple to every four near-neighbor qubit via a capacitive tunable coupler and experimentally demonstrate high-fidelity controlled-phase (CZ) gate by manipulating center qubit and one near-neighbor qubit. Speckle purity benchmarking (SPB) and cross entrophy benchmarking (XEB) are used to assess the purity fidelity and the fidelity of the CZ gate. The average purity fidelity of the CZ gate is 99.69$\pm$0.04\% and the average fidelity of the CZ gate is 99.65$\pm$0.04\% which means the control error is about 0.04\%. Our work will help resovle many chanllenges in the implementation of large scale quantum systems.

quant-ph↗

arXiv2021

Quantum Computational Advantage via 60-Qubit 24-Cycle Random Circuit Sampling

To ensure a long-term quantum computational advantage, the quantum hardware should be upgraded to withstand the competition of continuously improved classical algorithms and hardwares. Here, we demonstrate a superconducting quantum computing systems \textit{Zuchongzhi} 2.1, which has 66 qubits in a two-dimensional array in a tunable coupler architecture. The readout fidelity of \textit{Zuchongzhi} 2.1 is considerably improved to an average of 97.74\%. The more powerful quantum processor enables us to achieve larger-scale random quantum circuit sampling, with a system scale of up to 60 qubits and 24 cycles. The achieved sampling task is about 6 orders of magnitude more difficult than that of Sycamore [Nature \textbf{574}, 505 (2019)] in the classic simulation, and 3 orders of magnitude more difficult than the sampling task on \textit{Zuchongzhi} 2.0 [arXiv:2106.14734 (2021)]. The time consumption of classically simulating random circuit sampling experiment using state-of-the-art classical algorithm and supercomputer is extended to tens of thousands of years (about $4.8\times 10^4$ years), while \textit{Zuchongzhi} 2.1 only takes about 4.2 hours, thereby significantly enhancing the quantum computational advantage.

quant-ph↗

arXiv2021

Experimental Quantum Generative Adversarial Networks for Image Generation

Quantum machine learning is expected to be one of the first practical applications of near-term quantum devices. Pioneer theoretical works suggest that quantum generative adversarial networks (GANs) may exhibit a potential exponential advantage over classical GANs, thus attracting widespread attention. However, it remains elusive whether quantum GANs implemented on near-term quantum devices can actually solve real-world learning tasks. Here, we devise a flexible quantum GAN scheme to narrow this knowledge gap, which could accomplish image generation with arbitrarily high-dimensional features, and could also take advantage of quantum superposition to train multiple examples in parallel. For the first time, we experimentally achieve the learning and generation of real-world hand-written digit images on a superconducting quantum processor. Moreover, we utilize a gray-scale bar dataset to exhibit the competitive performance between quantum GANs and the classical GANs based on multilayer perceptron and convolutional neural network architectures, respectively, benchmarked by the Fréchet Distance score. Our work provides guidance for developing advanced quantum generative models on near-term quantum devices and opens up an avenue for exploring quantum advantages in various GAN-related learning tasks.

quant-ph↗