Searcharxiv⌕ Search

arXiv subjects

G. A. C. Jones

Publications and source records attributed to G. A. C. Jones.

At least 37 records · Page 2Linked to original sources

All-electric all-semiconductor spin field effect transistors

The spin field effect transistor envisioned by Datta and Das opens a gateway to spin information processing. Although the coherent manipulation of electron spins in semiconductors is now possible, the realization of a functional spin field effect transistor for information processing has yet to be achieved, owing to several fundamental challenges such as the low spin-injection efficiency due to resistance mismatch, spin relaxation, and the spread of spin precession angles. Alternative spin transistor designs have therefore been proposed, but these differ from the field effect transistor concept and require the use of optical or magnetic elements, which pose difficulties for the incorporation into integrated circuits. Here, we present an all-electric and all-semiconductor spin field effect transistor, in which these obstacles are overcome by employing two quantum point contacts as spin injectors and detectors. Distinct engineering architectures of spin-orbit coupling are exploited for the quantum point contacts and the central semiconductor channel to achieve complete control of the electron spins -- spin injection, manipulation, and detection -- in a purely electrical manner. Such a device is compatible with large-scale integration and hold promise for future spintronic devices for information processing.

cond-mat.mes-hall↗

Vortex detection and quantum transport in mesoscopic graphene Josephson junction arrays

We investigate mesoscopic Josephson junction arrays created by patterning superconducting disks on monolayer graphene, concentrating on the high-$T/T_c$ regime of these devices and the phenomena which contribute to the superconducting glass state in diffusive arrays. We observe features in the magnetoconductance at rational fractions of flux quanta per array unit cell, which we attribute to the formation of flux-quantized vortices. The applied fields at which the features occur are well described by Ginzburg-Landau simulations that take into account the number of unit cells in the array. We find that the mean conductance and universal conductance fluctuations are both enhanced below the critical temperature and field of the superconductor, with greater enhancement away from the graphene Dirac point.

cond-mat.mes-hall↗

Dependence of the 0.7 anomaly on the curvature of the potential barrier in quantum wires

Ninety eight one-dimensional channels defined using split gates fabricated on a GaAs/AlGaAs heterostructure are measured during one cooldown at 1.4 K. The devices are arranged in an array on a single chip, and individually addressed using a multiplexing technique. The anomalous conductance feature known as the "0.7 structure" is studied using statistical techniques. The ensemble of data show that the 0.7 anomaly becomes more pronounced and occurs at lower values as the curvature of the potential barrier in the transport direction decreases. This corresponds to an increase in the effective length of the device. The 0.7 anomaly is not strongly influenced by other properties of the conductance related to density. The curvature of the potential barrier appears to be the primary factor governing the shape of the 0.7 structure at a given T and B.

cond-mat.mes-hall↗

Magnetic field induced charge redistribution in disordered graphene double quantum dots

We have studied the transport properties of a large graphene double quantum dot under the influence of background disorder potential and magnetic field. At low temperatures, the evolution of the charge-stability diagram as a function of B-field is investigated up to 10 Tesla. Our results indicate that the charging energy of quantum dot is reduced, and hence the size of the dot increases, at high magnetic field. We provide an explanation of our results using a tight-binding model, which describes the charge redistribution in a disordered graphene quantum dot via the formation of Landau levels and edge states. Our model suggests that the tunnel barriers separating different electron/hole puddles in a dot become transparent at high B-fields, resulting in the charge delocalization and reduced charging energy observed experimentally.

cond-mat.mes-hall↗

Hierarchy of modes in an interacting system

Studying interacting fermions in 1D at high energy, we find a hierarchy in the spectral weights of the excitations theoretically and we observe evidence for second-level excitations experimentally. Diagonalising a model of fermions (without spin), we show that levels of the hierarchy are separated by powers of $\mathcal{R}^{2}/L^{2}$, where $\mathcal{R}$ is a length-scale related to interactions and $L$ is the system length. The first-level (strongest) excitations form a mode with parabolic dispersion, like that of a renormalised single particle. The second-level excitations produce a singular power-law line shape to the first-level mode and multiple power-laws at the spectral edge. We measure momentum-resolved tunnelling of electrons (fermions with spin) from/to a wire formed within a GaAs heterostructure, which shows parabolic dispersion of the first-level mode and well-resolved spin-charge separation at low energy with appreciable interaction strength. We find structure resembling the second-level excitations, which dies away quite rapidly at high momentum.

cond-mat.str-el↗

Direct Imaging of Coherent Quantum Transport in Graphene Heterojunctions

We fabricate a graphene p-n-p heterojunction and exploit the coherence of weakly-confined Dirac quasiparticles to resolve the underlying scattering potential using low temperature scanning gate microscopy. The tip-induced perturbation to the heterojunction modifies the condition for resonant scattering, enabling us to detect localized Fabry-Perot cavities from the focal point of halos in scanning gate images. In addition to halos over the bulk we also observe ones spatially registered to the physical edge of the graphene. Guided by quantum transport simulations we attribute these to modified resonant scattering at the edges within elongated cavities that form due to focusing of the electrostatic field.

cond-mat.mes-hall↗

Statistical study of conductance properties in one-dimensional quantum wires focussing on the 0.7 anomaly

The properties of conductance in one-dimensional (1D) quantum wires are statistically investigated using an array of 256 lithographically-identical split gates, fabricated on a GaAs/AlGaAs heterostructure. All the split gates are measured during a single cooldown under the same conditions. Electron many-body effects give rise to an anomalous feature in the conductance of a one-dimensional quantum wire, known as the `0.7 structure' (or `0.7 anomaly'). To handle the large data set, a method of automatically estimating the conductance value of the 0.7 structure is developed. Large differences are observed in the strength and value of the 0.7 structure [from $0.63$ to $0.84\times (2e^2/h)$], despite the constant temperature and identical device design. Variations in the 1D potential profile are quantified by estimating the curvature of the barrier in the direction of electron transport, following a saddle-point model. The 0.7 structure appears to be highly sensitive to the specific confining potential within individual devices.

cond-mat.mes-hall↗

A low-temperature device architecture for the statistical study of electrical characteristics of 256 quantum devices

Research in the field of low-temperature electronics is limited by the small number of electrical contacts available on cryogenic set ups. This not only restricts the number of devices that can be fabricated, but also the device and circuit complexity. We present an on-chip multiplexing technique which significantly increases the number of devices locally measurable on a single chip, without the modification of existing fabrication or experimental set-ups. We demonstrate the operation of the multiplexer by performing electrical measurements of 256 quantum wires formed by split-gate devices using only 19 electrical contacts on a cryogenic set-up. The multiplexer allows the measurement of many devices and enables us to perform statistical analyses of various electrical features which exist in quantum wires. We use this architecture to investigate spatial variations of electrical characteristics, and reproducibility on two separate cooldowns. These statistical analyses are necessary to study device yield and manufacturability, in order for such devices to form the building blocks for the realisation of quantum integrated circuits. The multiplexer provides a scalable architecture which makes a whole series of further investigations into more complex devices possible.

cond-mat.mes-hall↗

Cryogenic on-chip multiplexer for the study of quantum transport in 256 split-gate devices

We present a multiplexing scheme for the measurement of large numbers of mesoscopic devices in cryogenic systems. The multiplexer is used to contact an array of 256 split gates on a GaAs/AlGaAs heterostructure, in which each split gate can be measured individually. The low-temperature conductance of split-gate devices is governed by quantum mechanics, leading to the appearance of conductance plateaux at intervals of 2e^2/h. A fabrication-limited yield of 94% is achieved for the array, and a "quantum yield" is also defined, to account for disorder affecting the quantum behaviour of the devices. The quantum yield rose from 55% to 86% after illuminating the sample, explained by the corresponding increase in carrier density and mobility of the two-dimensional electron gas. The multiplexer is a scalable architecture, and can be extended to other forms of mesoscopic devices. It overcomes previous limits on the number of devices that can be fabricated on a single chip due to the number of electrical contacts available, without the need to alter existing experimental set ups.

cond-mat.mes-hall↗

A non-invasive electron thermometer based on charge sensing of a quantum dot

We present a thermometry scheme to extract the temperature of a 2DEG by monitoring the charge occupation of a weakly tunnel-coupled 'thermometer' quantum dot using a quantum point contact detector. Electronic temperatures between 97 mK and 307 mK are measured by this method with an accuracy of up to 3 mK, and agree with those obtained by measuring transport through a quantum dot. The thermometer does not pass a current through the 2DEG, and can be incorporated as an add-on to measure the temperature simultaneously with another operating device. Further, the tuning is independent of temperature.

cond-mat.mes-hall↗

Ultra-shallow quantum dots in an undoped GaAs/AlGaAs 2D electron gas

We report quantum dots fabricated on very shallow 2-dimensional electron gases, only 30 nm below the surface, in undoped GaAs/AlGaAs heterostructures grown by molecular beam epitaxy. Due to the absence of dopants, an improvement of more than one order of magnitude in mobility (at 2E11 /cm^2) with respect to doped heterostructures with similar depths is observed. These undoped wafers can easily be gated with surface metallic gates patterned by e-beam lithography, as demonstrated here from single-level transport through a quantum dot showing large charging energies (up to 1.75 meV) and excited state energies (up to 0.5 meV).

cond-mat.mes-hall↗

Clock-controlled emission of single-electron wavepackets in a solid-state circuit

We demonstrate the transmission of single electron wavepackets from a clock-controlled source through an empty high-energy edge channel. The quantum dot source is loaded with single electrons which are then emitted with high kinetic energy ($\sim$150 meV). We find at high magnetic field that these electron can be transported over several microns without inelastic electron-electron or electron-phonon scattering. Using a time-resolved spectroscopic technique, we measure the electron energy and wavepacket size at picosecond time scales. We also show how our technique can be used to switch individual electrons into different paths.

cond-mat.mes-hall↗

All-electrical injection and detection of a spin polarized current using 1D conductors

All-electrical control of spin transport in nanostructures has been the central interest and chal- lenge of spin physics and spintronics. Here we demonstrate on-chip spin polarizing/filtering actions by driving the gate-defined one dimensional (1D) conductor, one of the simplest geometries for integrated quantum devices, away from the conventional Ohmic regime. Direct measurement of the spin polarization of the emitted current was performed when the momentum degeneracy was lifted, wherein both the 1D polarizer for spin injection and the analyzer for spin detection were demonstrated. The results showed that a configuration of gates and applied voltages can give rise to a tunable spin polarization, which has implications for the development of spintronic devices and future quantum information processing.

cond-mat.mes-hall↗

Stabilization of single-electron pumps by high magnetic fields

We study the effect of perpendicular magnetic fields on a single-electron system with a strongly time-dependent electrostatic potential. Continuous improvements to the current quantization in these electron pumps are revealed by high-resolution measurements. Simulations show that the sensitivity of tunnel rates to the barrier potential is enhanced, stabilizing particular charge states. Nonadiabatic excitations are also suppressed due to a reduced sensitivity of the Fock-Darwin states to electrostatic potential. The combination of these effects leads to significantly more accurate current quantization.

cond-mat.mes-hall↗

Gigahertz quantized charge pumping in graphene quantum dots

Single electron pumps are set to revolutionize electrical metrology by enabling the ampere to be re-defined in terms of the elementary charge of an electron. Pumps based on lithographically-fixed tunnel barriers in mesoscopic metallic systems and normal/superconducting hybrid turnstiles can reach very small error rates, but only at MHz pumping speeds corresponding to small currents of the order 1 pA. Tunable barrier pumps in semiconductor structures have been operated at GHz frequencies, but the theoretical treatment of the error rate is more complex and only approximate predictions are available. Here, we present a monolithic, fixed barrier single electron pump made entirely from graphene. We demonstrate pump operation at frequencies up to 1.4 GHz, and predict the error rate to be as low as 0.01 parts per million at 90 MHz. Combined with the record-high accuracy of the quantum Hall effect and proximity induced Josephson junctions, accurate quantized current generation brings an all-graphene closure of the quantum metrological triangle within reach. Envisaged applications for graphene charge pumps outside quantum metrology include single photon generation via electron-hole recombination in electrostatically doped bilayer graphene reservoirs, and for readout of spin-based graphene qubits in quantum information processing.

cond-mat.mes-hall↗

Towards a quantum representation of the ampere using single electron pumps

Electron pumps generate a macroscopic electric current by controlled manipulation of single electrons. Despite intensive research towards a quantum current standard over the last 25 years, making a fast and accurate quantised electron pump has proved extremely difficult. Here we demonstrate that the accuracy of a semiconductor quantum dot pump can be dramatically improved by using specially designed gate drive waveforms. Our pump can generate a current of up to 150 pA, corresponding to almost a billion electrons per second, with an experimentally demonstrated current accuracy better than 1.2 parts per million (ppm) and strong evidence, based on fitting data to a model, that the true accuracy is approaching 0.01 ppm. This type of pump is a promising candidate for further development as a realisation of the SI base unit ampere, following a re-definition of the ampere in terms of a fixed value of the elementary charge.

cond-mat.mes-hall↗

Quantized Charge Pumping through a Carbon Nanotube Double Quantum Dot

We demonstrate single-electron pumping in a gate-defined carbon nanotube double quantum dot. By periodic modulation of the potentials of the two quantum dots we move the system around charge triple points and transport exactly one electron or hole per cycle. We investigate the pumping as a function of the modulation frequency and amplitude and observe good current quantization up to frequencies of 18 MHz where rectification effects cause the mechanism to break down.

cond-mat.mes-hall↗

Unraveling quantum Hall breakdown in bilayer graphene with scanning gate microscopy

We use low-temperature scanning gate microscopy (SGM) to investigate the breakdown of the quantum Hall regime in an exfoliated bilayer graphene flake. SGM images captured during breakdown exhibit intricate patterns of "hotspots" where the conductance is strongly affected by the presence of the tip. Our results are well described by a model based on quantum percolation which relates the points of high responsivity to tip-induced scattering between localized Landau levels.

cond-mat.mes-hall↗