arXiv subjects

G. Scappucci

Publications and source records attributed to G. Scappucci.

At least 19 recordsLinked to original sources

arXiv2026

Spin qubit operations by conveyor-mode shuttling

Dynamic qubit routing is emerging as a promising architectural path for semiconductor quantum processors. Charge carriers can be rapidly moved around on a chip using traveling-wave potentials known as conveyors, preserving the spin state with high fidelity. Originally developed for spin transport, conveyor-mode shuttling may also offer opportunities for performing qubit operations directly controlled by the motion itself. Here, we demonstrate coherent single- and two-qubit control by conveyor-mode electron shuttling, using two conceptually different approaches. First, conveyor electric-dipole spin resonance (conveyor EDSR) achieves high-fidelity rotations by resonantly shuttling spins through transverse magnetic-field gradients at their mean Larmor frequency. Second, conveyor diabatic gates exploit quantization-axis tilts for tunable bang-bang control. Combining diabatic conveyor transport with exchange activation controlled by the motion directly yields a variety of effective two-qubit interactions selectable via the shuttling speed and distance. These experimental results motivate an architectural paradigm of reconfigurable and transport-driven spin qubits.

cond-mat.mes-hall↗

arXiv2026

Simultaneous operation of an 18-qubit modular array in germanium

Utility-scale quantum computing requires the integration and operation of a large-scale qubit register. Semiconductor spin qubits are a primary candidate for this, due to the prospects of building integrated hybrid quantum-classical architectures. However, scaling spin-qubit systems while preserving performance and control has remained a challenge. Here, we demonstrate the operation of an 18-qubit array in germanium based on an extendable 2xN architecture. We achieve simultaneous initialization, control, and readout across the entire array, enabled by parallel operation of modular unit cells. Across the array, we achieve average and median single-qubit gate fidelities of 99.8% and 99.9%, respectively. Finally, we characterize the nearest-neighbor exchange couplings throughout the device and implement high-quality controlled-Z gates to generate a three-qubit Greenberger-Horne-Zeilinger (GHZ) state. These results demonstrate that spin-qubit arrays can be scaled while maintaining high-fidelity operation and establish a modular, extendable architecture for planar semiconductor quantum processors.

cond-mat.mes-hall↗

arXiv2025

Running a six-qubit quantum circuit on a silicon spin qubit array

The simplicity of encoding a qubit in the state of a single electron spin and the potential for their integration into industry-standard microchips continue to drive the field of semiconductor-based quantum computing. However, after decades of progress, validating universal logic in these platforms has advanced little beyond first-principles demonstrations of meeting the DiVincenzo criteria. Case in point, and specifically for silicon-based quantum dots, three-qubit algorithms have been the upper limit to date, despite the availability of devices containing more qubits. In this work, we fully exploit the capacity of a spin-qubit array and implement a six qubit quantum circuit, the largest utilizing semiconductor quantum technology. By programming the quantum processor, we execute quantum circuits across all permutations of three, four, five, and six neighbouring qubits, demonstrating successful programmable multi-qubit operation throughout the array. The results reveal that, despite the high quality of individual units, errors quickly accumulate when combining all of them in a quantum circuit. This work highlights the necessity to minimize idling times through simultaneous operations, boost dephasing times, and consistently improve state preparation and measurement fidelities.

quant-ph↗

arXiv2025

Operating semiconductor qubits without individual barrier gates

Semiconductor spin qubits have emerged as a promising platform for quantum computing, following a significant improvement in their control fidelities over recent years. Increasing the qubit count remains challenging, beginning with the fabrication of small features and complex fanouts. A particular challenge has been formed by the need for individual barrier gates to control the exchange interaction between adjacent spin qubits. Here, we propose a method to vary two-qubit interactions without applying pulses on individual barrier gates while also remaining insensitive to detuning noise in first order. Experimentally we find that changing plunger gate voltages over 300 mV can tune the exchange energy $J$ from 100 kHz to 60 MHz. This allows us to perform two-qubit operations without changing the barrier gate voltage. Based on these findings we conceptualize a spin qubit architecture without individual barrier gates, simplifying the fabrication while maintaining the control necessary for universal quantum computation.

cond-mat.mes-hall↗

arXiv2023

Exciton transport in a germanium quantum dot ladder

Quantum systems with engineered Hamiltonians can be used as simulators of many-body physics problems to provide insights beyond the capabilities of classical computers. Semiconductor gate-defined quantum dot arrays have emerged as a versatile platform for quantum simulation of generalized Fermi-Hubbard physics, one of the richest playgrounds in condensed matter physics. In this work, we employ a germanium 4$\times$2 quantum dot array and show that the naturally occurring long-range Coulomb interaction can lead to exciton formation and transport. We tune the quantum dot ladder into two capacitively-coupled channels and exploit Coulomb drag to probe the binding of electrons and holes. Specifically, we shuttle an electron through one leg of the ladder and observe that a hole is dragged along in the second leg under the right conditions. This corresponds to a transition from single-electron transport in one leg to exciton transport along the ladder. Our work paves the way for the study of excitonic states of matter in quantum dot arrays.

cond-mat.mes-hall↗

arXiv2022

Reducing charge noise in quantum dots by using thin silicon quantum wells

Charge noise in the host semiconductor degrades the performance of spin-qubits and poses an obstacle to control large quantum processors. However, it is challenging to engineer the heterogeneous material stack of gate-defined quantum dots to improve charge noise systematically. Here, we address the semiconductor-dielectric interface and the buried quantum well of a $^{28}$Si/SiGe heterostructure and show the connection between charge noise, measured locally in quantum dots, and global disorder in the host semiconductor, measured with macroscopic Hall bars. In 5 nm thick $^{28}$Si quantum wells, we find that improvements in the scattering properties and uniformity of the two-dimensional electron gas over a 100 mm wafer correspond to a significant reduction in charge noise, with a minimum value of 0.29$\pm$0.02 $\mu$eV/sqrt(Hz) at 1 Hz averaged over several quantum dots. We extrapolate the measured charge noise to simulated dephasing times to cz-gate fidelities that improve nearly one order of magnitude. These results point to a clean and quiet crystalline environment for integrating long-lived and high-fidelity spin qubits into a larger system.

cond-mat.mes-hall↗

arXiv2022

Shuttling an electron spin through a silicon quantum dot array

Coherent links between qubits separated by tens of micrometers are expected to facilitate scalable quantum computing architectures for spin qubits in electrically-defined quantum dots. These links create space for classical on-chip control electronics between qubit arrays, which can help to alleviate the so-called wiring bottleneck. A promising method of achieving coherent links between distant spin qubits consists of shuttling the spin through an array of quantum dots. Here, we use a linear array of four tunnel-coupled quantum dots in a 28Si/SiGe heterostructure to create a short quantum link. We move an electron spin through the quantum dot array by adjusting the electrochemical potential for each quantum dot sequentially. By pulsing the gates repeatedly, we shuttle an electron forward and backward through the array up to 250 times, which corresponds to a total distance of approximately 80 {\mu}m. We make an estimate of the spin-flip probability per hop in these experiments and conclude that this is well below 0.01% per hop.

cond-mat.mes-hall↗

arXiv2022

Phase flip code with semiconductor spin qubits

The fault-tolerant operation of logical qubits is an important requirement for realizing a universal quantum computer. Spin qubits based on quantum dots have great potential to be scaled to large numbers because of their compatibility with standard semiconductor manufacturing. Here, we show that a quantum error correction code can be implemented using a four-qubit array in germanium. We demonstrate a resonant SWAP gate and by combining controlled-Z and controlled-$\text{S}^{-1}$ gates we construct a Toffoli-like three-qubit gate. We execute a two-qubit phase flip code and find that we can preserve the state of the data qubit by applying a refocusing pulse to the ancilla qubit. In addition, we implement a phase flip code on three qubits, making use of a Toffoli-like gate for the final correction step. Both the quality and quantity of the qubits will require significant improvement to achieve fault-tolerance. However, the capability to implement quantum error correction codes enables co-design development of quantum hardware and software, where codes tailored to the properties of spin qubits and advances in fabrication and operation can now come together to scale semiconductor quantum technology toward universal quantum computers.

quant-ph↗

arXiv2022

A quantum dot crossbar with sublinear scaling of interconnects at cryogenic temperature

We demonstrate a 36$\times$36 gate electrode crossbar that supports 648 narrow-channel field effect transistors (FET) for gate-defined quantum dots, with a quadratic increase in quantum dot count upon a linear increase in control lines. The crossbar is fabricated on an industrial $^{28}$Si-MOS stack and shows 100% FET yield at cryogenic temperature. We observe a decreasing threshold voltage for wider channel devices and obtain a normal distribution of pinch-off voltages for nominally identical tunnel barriers probed over 1296 gate crossings. Macroscopically across the crossbar, we measure an average pinch-off of 1.17~V with a standard deviation of 46.8 mV, while local differences within each unit cell indicate a standard deviation of 23.1~mV. These disorder potential landscape variations translate to 1.2 and 0.6 times the measured quantum dot charging energy, respectively. Such metrics provide means for material and device optimization and serve as guidelines in the design of large-scale architectures for fault-tolerant semiconductor-based quantum computing.

cond-mat.mes-hall↗

arXiv2022

A high-mobility hole bilayer in a germanium double quantum well

We design, fabricate, and study a hole bilayer in a strained germanium double quantum well. Magnetotransport characterisation of double quantum well field-effect transistors as a function of gate voltage reveals the population of two hole channels with a high combined mobility of 3.34$\times$10$^5$ cm$^2$/Vs and a low percolation density of 2.38$\times$10$^{10}$ cm$^{-2}$. We resolve the individual population of the channels from the interference patterns of the Landau fan diagram. At a density of 2.0$\times$10$^{11}$ cm$^{-2}$ the system is in resonance and we observe an anti-crossing of the first two bilayer subbands characterized by a symmetric-antisymmetric gap of $\sim$0.69 meV, in agreement with Schr\"odinger-Poisson simulations.

cond-mat.mes-hall↗

arXiv2021

Lightly-strained germanium quantum wells with hole mobility exceeding one million

We demonstrate that a lightly-strained germanium channel ($\varepsilon_{//}$ = -0.41%) in an undoped Ge/Si$_{0.1}$Ge$_{0.9}$ heterostructure field effect transistor supports a 2D hole gas with mobility in excess of 1$\times$10$^{6}$ cm$^{2}$/Vs and percolation density less than 5$\times$10$^{10}$ cm$^{-2}$. This low disorder 2D hole system shows tunable fractional quantum Hall effect at low density and low magnetic field. The low-disorder and small effective mass (0.068$m_e$) defines lightly-strained germanium as a basis to tune the strength of the spin-orbit coupling for fast and coherent quantum hardware.

cond-mat.mes-hall↗

arXiv2021

Valley splitting in silicon from the interference pattern of quantum oscillations

We determine the energy splitting of the conduction-band valleys in two-dimensional (2D) electrons confined in silicon metal oxide semiconductor (Si-MOS) Hall-bar transistors. These Si-MOS Hall bars are made by advanced semiconductor manufacturing on 300 mm Si wafers and support a 2D electron gas of high quality with a maximum mobility of 17.6$\times$10$^3$cm$^2$/Vs and minimum percolation density of 3.45$\times$10$^{10}$cm$^{-2}$. Because of the low disorder, we observe beatings in the Shubnikov-de Haas oscillations that arise from the energy-split two low-lying conduction band valleys. From the analysis of the oscillations beating patterns up to T = 1.7 K, we estimate a maximum valley splitting of 8.2 meV at a density of 6.8$\times$10$^{12}$cm$^{-2}$. Furthermore, the valley splitting increases with density at a rate consistent with theoretical predictions for a near-ideal semiconductor/oxide interface.

cond-mat.mes-hall↗

arXiv2021

Simultaneous single-qubit driving of semiconductor spin qubits at the fault-tolerant threshold

Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbour pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.

cond-mat.mes-hall↗

arXiv2021

Single-Hole Pump in Germanium

Single-charge pumps are the main candidates for quantum-based standards of the unit ampere because they can generate accurate and quantized electric currents. In order to approach the metrological requirements in terms of both accuracy and speed of operation, in the past decade there has been a focus on semiconductor-based devices. The use of a variety of semiconductor materials enables the universality of charge pump devices to be tested, a highly desirable demonstration for metrology, with GaAs and Si pumps at the forefront of these tests. Here, we show that pumping can be achieved in a yet unexplored semiconductor, i.e. germanium. We realise a single-hole pump with a tunable-barrier quantum dot electrostatically defined at a Ge/SiGe heterostructure interface. We observe quantized current plateaux by driving the system with a single sinusoidal drive up to a frequency of 100 MHz. The operation of the prototype was affected by accidental formation of multiple dots, probably due to disorder potential, and random charge fluctuations. We suggest straightforward refinements of the fabrication process to improve pump characteristics in future experiments.

cond-mat.mes-hall↗

arXiv2021

Qubits made by advanced semiconductor manufacturing

Full-scale quantum computers require the integration of millions of quantum bits. The promise of leveraging industrial semiconductor manufacturing to meet this requirement has fueled the pursuit of quantum computing in silicon quantum dots. However, to date, their fabrication has relied on electron-beam lithography and, with few exceptions, on academic style lift-off processes. Although these fabrication techniques offer process flexibility, they suffer from low yield and poor uniformity. An important question is whether the processing conditions developed in the manufacturing fab environment to enable high yield, throughput, and uniformity of transistors are suitable for quantum dot arrays and do not compromise the delicate qubit properties. Here, we demonstrate quantum dots hosted at a 28Si/28SiO2 interface, fabricated in a 300 mm semiconductor manufacturing facility using all-optical lithography and fully industrial processing. As a result, we achieve nanoscale gate patterns with remarkable homogeneity. The quantum dots are well-behaved in the multi-electron regime, with excellent tunnel barrier control, a crucial feature for fault-tolerant two-qubit gates. Single-spin qubit operation using magnetic resonance reveals relaxation times of over 1 s at 1 Tesla and coherence times of over 3 ms, matching the quality of silicon spin qubits reported to date. The feasibility of high-quality qubits made with fully-industrial techniques strongly enhances the prospects of a large-scale quantum computer

cond-mat.mes-hall↗

arXiv2020

A four-qubit germanium quantum processor

The prospect of building quantum circuits using advanced semiconductor manufacturing positions quantum dots as an attractive platform for quantum information processing. Extensive studies on various materials have led to demonstrations of two-qubit logic in gallium arsenide, silicon, and germanium. However, interconnecting larger numbers of qubits in semiconductor devices has remained an outstanding challenge. Here, we demonstrate a four-qubit quantum processor based on hole spins in germanium quantum dots. Furthermore, we define the quantum dots in a two-by-two array and obtain controllable coupling along both directions. Qubit logic is implemented all-electrically and the exchange interaction can be pulsed to freely program one-qubit, two-qubit, three-qubit, and four-qubit operations, resulting in a compact and high-connectivity circuit. We execute a quantum logic circuit that generates a four-qubit Greenberger-Horne-Zeilinger state and we obtain coherent evolution by incorporating dynamical decoupling. These results are an important step towards quantum error correction and quantum simulation with quantum dots.

cond-mat.mes-hall↗

arXiv2020

A two-dimensional array of single-hole quantum dots

Quantum dots fabricated using techniques and materials that are compatible with semiconductor manufacturing are promising for quantum information processing. While great progress has been made toward high-fidelity control of quantum dots positioned in a linear arrangement, scalability along two dimensions is a key step toward practical quantum information processing. Here we demonstrate a two-dimensional quantum dot array where each quantum dot is tuned to single-charge occupancy, verified by simultaneous measuring with two integrated radio frequency charge sensors. We achieve this by using planar germanium quantum dots with low disorder and small effective mass, allowing the incorporation of dedicated barrier gates to control the coupling of the quantum dots. We demonstrate hole charge filling consistent with a Fock-Darwin spectrum and show that we can tune single-hole quantum dots from isolated quantum dots to strongly exchange coupled quantum dots. These results motivate the use of planar germanium quantum dots as building blocks for quantum simulation and computation.

cond-mat.mes-hall↗

arXiv2020

Low percolation density and charge noise with holes in germanium

We engineer planar Ge/SiGe heterostructures for low disorder and quiet hole quantum dot operation by positioning the strained Ge channel 55~nm below the semiconductor/dielectric interface. In heterostructure field effect transistors, we measure a percolation density for two-dimensional hole transport of $2.1\times10^{10}~\text{cm}^{-2}$, indicative of a very low disorder potential landscape experienced by holes in the buried Ge channel. These Ge heterostructures support quiet operation of hole quantum dots and we measure charge noise levels that are below the detection limit $\sqrt{S_\text{E}}=0.2~\mu \text{eV}/\sqrt{\text{Hz}}$ at 1 Hz. These results establish planar Ge as a promising platform for scaled two-dimensional spin qubit arrays.

cond-mat.mes-hall↗