arXiv subjects

G. Scappucci

Publications and source records attributed to G. Scappucci.

At least 37 records · Page 2Linked to original sources

arXiv2020

A two-dimensional array of single-hole quantum dots

Quantum dots fabricated using techniques and materials that are compatible with semiconductor manufacturing are promising for quantum information processing. While great progress has been made toward high-fidelity control of quantum dots positioned in a linear arrangement, scalability along two dimensions is a key step toward practical quantum information processing. Here we demonstrate a two-dimensional quantum dot array where each quantum dot is tuned to single-charge occupancy, verified by simultaneous measuring with two integrated radio frequency charge sensors. We achieve this by using planar germanium quantum dots with low disorder and small effective mass, allowing the incorporation of dedicated barrier gates to control the coupling of the quantum dots. We demonstrate hole charge filling consistent with a Fock-Darwin spectrum and show that we can tune single-hole quantum dots from isolated quantum dots to strongly exchange coupled quantum dots. These results motivate the use of planar germanium quantum dots as building blocks for quantum simulation and computation.

cond-mat.mes-hall↗

arXiv2020

Low percolation density and charge noise with holes in germanium

We engineer planar Ge/SiGe heterostructures for low disorder and quiet hole quantum dot operation by positioning the strained Ge channel 55~nm below the semiconductor/dielectric interface. In heterostructure field effect transistors, we measure a percolation density for two-dimensional hole transport of $2.1\times10^{10}~\text{cm}^{-2}$, indicative of a very low disorder potential landscape experienced by holes in the buried Ge channel. These Ge heterostructures support quiet operation of hole quantum dots and we measure charge noise levels that are below the detection limit $\sqrt{S_\text{E}}=0.2~μ\text{eV}/\sqrt{\text{Hz}}$ at 1 Hz. These results establish planar Ge as a promising platform for scaled two-dimensional spin qubit arrays.

cond-mat.mes-hall↗

arXiv2020

Spin relaxation benchmarks and individual qubit addressability for holes in quantum dots

We investigate hole spin relaxation in the single- and multi-hole regime in a 2x2 germanium quantum dot array. We use radiofrequency (rf) charge sensing and observe Pauli Spin-Blockade (PSB) for every second interdot transition up to the (1,5)-(0,6) anticrossing, consistent with a standard Fock-Darwin spectrum. We find spin relaxation times $T_1$ as high as 32 ms for a quantum dot with single-hole occupation and 1.2 ms for a quantum dot occupied by five-holes, setting benchmarks for spin relaxation times for hole quantum dots. Furthermore, we investigate the qubit addressability and sensitivity to electric fields by measuring the resonance frequency dependence of each qubit on gate voltages. We are able to tune the resonance frequency over a large range for both the single and multi-hole qubit. Simultaneously, we find that the resonance frequencies are only weakly dependent on neighbouring gates, and in particular the five-hole qubit resonance frequency is more than twenty times as sensitive to its corresponding plunger gate. The excellent individual qubit tunability and long spin relaxation times make holes in germanium promising for addressable and high-fidelity spin qubits in dense two-dimensional quantum dot arrays for large-scale quantum information.

cond-mat.mes-hall↗

arXiv2020

On-chip Integration of Si/SiGe-based Quantum Dots and Switched-capacitor Circuits

Solid-state qubits integrated on semiconductor substrates currently require at least one wire from every qubit to the control electronics, leading to a so-called wiring bottleneck for scaling. Demultiplexing via on-chip circuitry offers an effective strategy to overcome this bottleneck. In the case of gate-defined quantum dot arrays, specific static voltages need to be applied to many gates simultaneously to realize electron confinement. When a charge-locking structure is placed between the quantum device and the demultiplexer, the voltage can be maintained locally. In this study, we implement a switched-capacitor circuit for charge-locking and use it to float the plunger gate of a single quantum dot. Parallel plate capacitors, transistors and quantum dot devices are monolithically fabricated on a Si/SiGe-based substrate to avoid complex off-chip routing. We experimentally study the effects of the capacitor and transistor size on the voltage accuracy of the floating node. Furthermore, we demonstrate that the electrochemical potential of the quantum dot can follow a 100 Hz pulse signal while the dot is partially floating, which is essential for applying this strategy in qubit experiments.

cond-mat.mes-hall↗

arXiv2019

A single-hole spin qubit

Qubits based on quantum dots have excellent prospects for scalable quantum technology due to their inherent compatibility with standard semiconductor manufacturing. While early on it was recognized that holes may offer a multitude of favourable properties for fast and scalable quantum control, research thus far has remained almost exclusively restricted to the simpler electron system. However, recent developments with holes have led to separate demonstrations of single-shot readout and fast quantum logic, albeit only in the multi-hole regime. Here, we establish a single-hole spin qubit in germanium and demonstrate the integration of single-shot readout and quantum control. Moreover, we make use of Pauli spin blockade, allowing to arbitrarily set the qubit resonance frequency, while providing large readout windows. We deplete a planar germanium double quantum dot to the last hole, confirmed by radio-frequency reflectrometry charge sensing, and achieve single-shot spin readout. To demonstrate the integration of the readout and qubit operation, we show Rabi driving on both qubits and find remarkable electric control over their resonance frequencies. Finally, we analyse the spin relaxation time, which we find to exceed one millisecond, setting the benchmark for hole-based spin qubits. The ability to coherently manipulate a single hole spin underpins the quality of strained germanium and defines an excellent starting point for the construction of novel quantum hardware.

cond-mat.mes-hall↗

arXiv2019

Quantum Dot Arrays in Silicon and Germanium

Electrons and holes confined in quantum dots define an excellent building block for quantum emergence, simulation, and computation. In order for quantum electronics to become practical, large numbers of quantum dots will be required, necessitating the fabrication of scaled structures such as linear and 2D arrays. Group IV semiconductors contain stable isotopes with zero nuclear spin and can thereby serve as excellent host for spins with long quantum coherence. Here we demonstrate group IV quantum dot arrays in silicon metal-oxide-semiconductor (SiMOS), strained silicon (Si/SiGe) and strained germanium (Ge/SiGe). We fabricate using a multi-layer technique to achieve tightly confined quantum dots and compare integration processes. While SiMOS can benefit from a larger temperature budget and Ge/SiGe can make ohmic contact to metals, the overlapping gate structure to define the quantum dots can be based on a nearly identical integration. We realize charge sensing in each platform, for the first time in Ge/SiGe, and demonstrate fully functional linear and two-dimensional arrays where all quantum dots can be depleted to the last charge state. In Si/SiGe, we tune a quintuple quantum dot using the N+1 method to simultaneously reach the few electron regime for each quantum dot. We compare capacitive cross talk and find it to be the smallest in SiMOS, relevant for the tuning of quantum dot arrays. These results constitute an excellent base for quantum computation with quantum dots and provide opportunities for each platform to be integrated with standard semiconductor manufacturing.

cond-mat.mes-hall↗

arXiv2019

Multiplexed quantum transport using commercial off-the-shelf CMOS at sub-kelvin temperatures

Continuing advancements in quantum information processing have caused a paradigm shift from research mainly focused on testing the reality of quantum mechanics to engineering qubit devices with numbers required for practical quantum computation. One of the major challenges in scaling toward large-scale solid-state systems is the limited input/output (I/O) connectors present in cryostats operating at sub-kelvin temperatures required to execute quantum logic with high-fidelity. This interconnect bottleneck is equally present in the device fabrication-measurement cycle, which requires high-throughput and cryogenic characterization to develop quantum processors. Here we multiplex quantum transport of two-dimensional electron gases at sub-kelvin temperatures. We use commercial off-the-shelf CMOS multiplexers to achieve an order of magnitude increase in the number of wires. Exploiting this technology we advance 300 mm epitaxial wafers manufactured in an industrial CMOS fab to a record electron mobility of (3.9$\pm$0.6)$\times$10$^5$ cm$^2$\slash Vs and percolation density of (6.9$\pm$0.4)$\times$10$^{10}$ cm$^{-2}$, representing a key step toward large silicon qubit arrays. We envision that the demonstration will inspire the development of cryogenic electronics for quantum information and because of the simplicity of assembly, low-cost, yet versatility, we foresee widespread use of similar cryo-CMOS circuits for high-throughput quantum measurements and control of quantum engineered systems.

cond-mat.mes-hall↗

arXiv2019

Light effective hole mass in undoped Ge/SiGe quantum wells

We report density-dependent effective hole mass measurements in undoped germanium quantum wells. We are able to span a large range of densities ($2.0-11\times10^{11}$ cm$^{-2}$) in top-gated field effect transistors by positioning the strained buried Ge channel at different depths of 12 and 44 nm from the surface. From the thermal damping of the amplitude of Shubnikov-de Haas oscillations, we measure a light mass of $0.061m_e$ at a density of $2.2\times10^{11}$ cm$^{-2}$. We confirm the theoretically predicted dependence of increasing mass with density and by extrapolation we find an effective mass of $\sim0.05m_e$ at zero density, the lightest effective mass for a planar platform that demonstrated spin qubits in quantum dots.

cond-mat.mes-hall↗

arXiv2019

Fast two-qubit logic with holes in germanium

The promise of quantum computation with quantum dots has stimulated widespread research. Still, a platform that can combine excellent control with fast and high-fidelity operation is absent. Here, we show single and two-qubit operations based on holes in germanium. A high degree of control over the tunnel coupling and detuning is obtained by exploiting quantum wells with very low disorder and by working in a virtual gate space. Spin-orbit coupling obviates the need for microscopic elements and enables rapid qubit control with Rabi frequencies exceeding 100 MHz and a single-qubit fidelity of 99.3 %. We demonstrate fast two-qubit CX gates executed within 75 ns and minimize decoherence by operating at the charge symmetry point. Planar germanium thus matured within one year from a material that can host quantum dots to a platform enabling two-qubit logic, positioning itself as a unique material to scale up spin qubits for quantum information.

cond-mat.mes-hall↗

arXiv2019

Quantum transport properties of industrial $^{28}$Si/$^{28}$SiO$_2$

We investigate the structural and quantum transport properties of isotopically enriched $^{28}$Si/$^{28}$SiO$_2$ stacks deposited on 300 mm Si wafers in an industrial CMOS fab. Highly uniform films are obtained with an isotopic purity greater than 99.92\%. Hall-bar transistors with an equivalent oxide thickness of 17 nm are fabricated in an academic cleanroom. A critical density for conduction of $1.75\times10^{11}$ cm$^{-2}$ and a peak mobility of 9800 cm$^2$/Vs are measured at a temperature of 1.7 K. The $^{28}$Si/$^{28}$SiO$_2$ interface is characterized by a roughness of $Δ=0.4$ nm and a correlation length of $Λ=3.4$ nm. An upper bound for valley splitting energy of 480 $μ$eV is estimated at an effective electric field of 9.5 MV/m. These results support the use of wafer-scale $^{28}$Si/$^{28}$SiO$_2$ as a promising material platform to manufacture industrial spin qubits.

cond-mat.mes-hall↗

arXiv2019

Rapid high-fidelity gate-based spin read-out in silicon

Silicon spin qubits form one of the leading platforms for quantum computation. As with any qubit implementation, a crucial requirement is the ability to measure individual quantum states rapidly and with high fidelity. As the signal from a single electron spin is minute, different spin states are converted to different charge states. Charge detection so far mostly relied on external electrometers, which hinders scaling to two-dimensional spin qubit arrays. As an alternative, gate-based dispersive read-out based on off-chip lumped element resonators were introduced, but here integration times of 0.2 to 2 ms were required to achieve single-shot read-out. Here we connect an on-chip superconducting resonant circuit to two of the gates that confine electrons in a double quantum dot. Measurement of the power transmitted through a feedline coupled to the resonator probes the charge susceptibility, distinguishing whether or not an electron can oscillate between the dots in response to the probe power. With this approach, we achieve a signal-to-noise ratio (SNR) of about six within an integration time of only 1 $μ$s. Using Pauli's exclusion principle for spin-to-charge conversion, we demonstrate single-shot read-out of a two-electron spin state with an average fidelity of $>$98% in 6 $μ$s. This result may form the basis of frequency multiplexed read-out in dense spin qubit systems without external electrometers, therefore simplifying the system architecture.

cond-mat.mes-hall↗

arXiv2018

Low disordered, stable, and shallow germanium quantum wells: a playground for spin and hybrid quantum technology

Buried-channel semiconductor heterostructures are an archetype material platform to fabricate gated semiconductor quantum devices. Sharp confinement potential is obtained by positioning the channel near the surface, however nearby surface states degrade the electrical properties of the starting material. In this paper we demonstrate a two-dimensional hole gas of high mobility ($5\times 10^{5}$ cm$^2$/Vs) in a very shallow strained germanium channel, which is located only 22 nm below the surface. This high mobility leads to mean free paths $\approx6 μm$, setting new benchmarks for holes in shallow FET devices. Carriers are confined in an undoped Ge/SiGe heterostructure with reduced background contamination, sharp interfaces, and high uniformity. The top-gate of a dopant-less field effect transistor controls the carrier density in the channel. The high mobility, along with a percolation density of $1.2\times 10^{11}\text{ cm}^{-2}$, light effective mass (0.09 m$_e$), and high g-factor (up to $7$) highlight the potential of undoped Ge/SiGe as a low-disorder material platform for hybrid quantum technologies.

cond-mat.mes-hall↗

arXiv2018

Ballistic supercurrent discretization and micrometer-long Josephson coupling in germanium

We fabricate Josephson field-effect-transistors in germanium quantum wells contacted by superconducting aluminum and demonstrate supercurrents carried by holes that extend over junction lengths of several micrometers. In superconducting quantum point contacts we observe discretization of supercurrent, as well as Fabry-Perot resonances, demonstrating ballistic transport. The magnetic field dependence of the supercurrent follows a clear Fraunhofer-like pattern and Shapiro steps appear upon microwave irradiation. Multiple Andreev reflections give rise to conductance enhancement and evidence a transparent interface, confirmed by analyzing the excess current. These demonstrations of ballistic superconducting transport are promising for hybrid quantum technology in germanium.

cond-mat.supr-con↗

arXiv2018

Gate-controlled quantum dots and superconductivity in planar germanium

Superconductors and semiconductors are crucial platforms in the field of quantum computing. They can be combined to hybrids, bringing together physical properties that enable the discovery of new emergent phenomena and provide novel strategies for quantum control. The involved semiconductor materials, however, suffer from disorder, hyperfine interactions or lack of planar technology. Here we realise an approach that overcomes these issues altogether and integrate gate-defined quantum dots and superconductivity into a material system with strong spin-orbit coupling. In our germanium heterostructures, heavy holes with mobilities exceeding 500,000 cm$^2$/Vs are confined in shallow quantum wells that are directly contacted by annealed aluminium leads. We demonstrate gate-tunable superconductivity and find a characteristic voltage $I_cR_n$ that exceeds 10 $μ$V. Germanium therefore has great promise for fast and coherent quantum hardware and, being compatible with standard manufacturing, could become a leading material in the quantum revolution.

cond-mat.mes-hall↗

arXiv2017

Strong spin-photon coupling in silicon

We report the strong coupling of a single electron spin and a single microwave photon. The electron spin is trapped in a silicon double quantum dot and the microwave photon is stored in an on-chip high-impedance superconducting resonator. The electric field component of the cavity photon couples directly to the charge dipole of the electron in the double dot, and indirectly to the electron spin, through a strong local magnetic field gradient from a nearby micromagnet. This result opens the way to the realization of large networks of quantum dot based spin qubit registers, removing a major roadblock to scalable quantum computing with spin qubits.

cond-mat.mes-hall↗

arXiv2015

Bottom-up assembly of metallic germanium

Extending chip performance beyond current limits of miniaturisation requires new materials and functionalities that integrate well with the silicon platform. Germanium fits these requirements and has been proposed as a high-mobility channel material,[1] a light emitting medium in silicon-integrated lasers,[2,3] and a plasmonic conductor for bio-sensing.[4,5] Common to these diverse applications is the need for homogeneous, high electron densities in three-dimensions (3D). Here we use a bottom-up approach to demonstrate the 3D assembly of atomically sharp doping profiles in germanium by a repeated stacking of two-dimensional (2D) high-density phosphorus layers. This produces high-density (10^19 to 10^20 cm-3) low-resistivity (10^-4 Ohmcm) metallic germanium of precisely defined thickness, beyond the capabilities of diffusion-based doping technologies.[6] We demonstrate that free electrons from distinct 2D dopant layers coalesce into a homogeneous 3D conductor using anisotropic quantum interference measurements, atom probe tomography, and density functional theory.

cond-mat.mtrl-sci↗

arXiv2014

Spontaneous breaking of time reversal symmetry in strongly interacting two dimensional electron layers in silicon and germanium

We report experimental evidence of a remarkable spontaneous time reversal symmetry breaking in two dimensional electron systems formed by atomically confined doping of phosphorus (P) atoms inside bulk crystalline silicon (Si) and germanium (Ge). Weak localization corrections to the conductivity and the universal conductance fluctuations were both found to decrease rapidly with decreasing doping in the Si:P and Ge:P $δ-$layers, suggesting an effect driven by Coulomb interactions. In-plane magnetotransport measurements indicate the presence of intrinsic local spin fluctuations at low doping, providing a microscopic mechanism for spontaneous lifting of the time reversal symmetry. Our experiments suggest the emergence of a new many-body quantum state when two dimensional electrons are confined to narrow half-filled impurity bands.

cond-mat.str-el↗

arXiv2009

Ultra-dense phosphorus in germanium delta-doped layers

Phosphorus (P) in germanium (Ge) delta-doped layers are fabricated in ultra-high vacuum by adsorption of phosphine molecules onto an atomically flat clean Ge(001) surface followed by thermal incorporation of P into the lattice and epitaxial Ge overgrowth by molecular beam epitaxy. Structural and electrical characterizations show that P atoms are confined, with minimal diffusion, into an ultra-narrow 2-nm-wide layer with an electrically-active sheet carrier concentration of 4x10^13 cm-2 at 4.2 K. These results open up the possibility of ultra-narrow source/drain regions with unprecedented carrier densities for Ge n-channel field effect transistors.

cond-mat.mes-hall↗