SearcharxivSearch

arXiv subjects

Gento Yamahata

Publications and source records attributed to Gento Yamahata.

13 recordsLinked to original sources

Charge discreteness and the energy efficiency of information erasure in dynamic random-access memory cells

A dynamic random-access memory (DRAM) cell stores information as an integer number of electrons on a capacitor, and whether this discreteness is thermodynamically relevant depends on the competition between the charging energy and thermal fluctuations. This competition is quantified by the ratio $\kappa$ of the single-electron charging energy to the thermal energy, and here we investigate how $\kappa$ affects the energy efficiency of information erasure in a DRAM cell. Using a stochastic-thermodynamic model of a DRAM cell, we show that the nonquasistatic heat released during the discharge step is suppressed as $\kappa$ increases, whereas the quasistatic heat of the charge step approaches the Landauer cost. As a result, the energy efficiency increases monotonically with $\kappa$ and approaches the Landauer limit where the effect of charge discreteness is maximal and the cell is effectively reduced to two charge states. The parameter $\kappa$ thus connects two thermodynamic regimes: a multilevel single-well memory, whose nonequilibrium initial state prevents quasistatic erasure, and an effective two-level memory that can attain the Landauer limit. These results identify $\kappa$ as the parameter that controls the fundamental efficiency ceiling of transistor--capacitor memory circuits.

cond-mat.stat-mech

Strong intervalley mixing between copropagating quantum Hall edge channels in a silicon MOSFET

Copropagating quantum Hall edge channels provide a promising platform for compact electron interferometry and flying quantum states. In silicon, the valley degree of freedom offers a natural alternative to spin-resolved edge channels because spin-flip scattering is strongly suppressed by the weak spin-orbit interaction. Here, we investigate interchannel transitions between copropagating valley edge channels in a double-layer-gated silicon metal-oxide-semiconductor field-effect transistor. With the bulk filling factor set to $\nu=2$, two spin-polarized valley edge channels are brought into close proximity near a depleted side gate. We observe strong intervalley mixing, with a transition probability close to 1/2, indicating nearly complete equilibration between the two valley edge channels. In contrast, interchannel transport between edge channels with different spin orientations shows negligible transition probability, consistent with suppressed spin-flip scattering in silicon. These results demonstrate that intervalley coupling at a Si/SiO$_2$ interface can provide a beam-splitter-like operation for copropagating valley edge channels, establishing a key building block toward compact silicon quantum Hall interferometers.

cond-mat.mes-hall

Thermodynamic Constraints in Dynamic Random-Access Memory Cells: Experimental Verification of Energy Efficiency Limits in Information Erasure

We measured the energy efficiency of information erasure using silicon DRAM cells capable of counting charges on capacitors at the single-electron level. Our measurements revealed that the efficiency decreased as the erasure error probability decreased, and notably, the Landauer limit was not achieved even under effectively infinite-time bit erasure. By comparing the measured efficiency with the Landauer limit, we identified a thermodynamic constraint that prevents DRAM from reaching this limit: the inability to prepare the initial state in thermal equilibrium, which in turn prohibits quasistatic operations. This finding has broad implications for DRAM cells and for many electronic circuits sharing similar structures. Furthermore, it validates our experimental approach to discovering thermodynamic constraints that impose tighter, practically relevant limits, opening a new direction in information thermodynamics research.

cond-mat.stat-mech

Scalable Parallel Single-Electron Pumps in Silicon with Split-Source Control in the Nanoampere Regime

Parallelizing single-electron pumps offers a promising route to achieving nanoampere-level currents crucial for quantum current standard applications. Achieving such current levels is essential for demonstrating the ultra-high accuracy of single-electron pumps below 0.1 ppm toward quantum metrology triangle experiments. In addition, improving the accuracy at this current range is also desirable for practical small-current measurements. However, nanoampere-level currents have not yet been achieved with parallel pumps, mainly due to challenges in optimizing operating conditions. Here, we propose a scalable and easily implementable parallelization method based on tunable-barrier single-electron pumps with split source electrodes. By tuning the source voltages, we successfully parallelize four single-electron pumps at 200 MHz and further demonstrate a current plateau exceeding 2 nA using three pumps at 2.1 GHz. The wide applicability of this parallelization technique opens a path toward advancing high-accuracy quantum current standards.

cond-mat.mes-hall

High frequency breakdown in quantum dots

Dynamic quantum dots are known to generate very accurate currents and can be used as a source of single electron wavepackets for use in quantum metrology, sensing or information processing. To realise their full technological potential, it is desirable to maximise the frequency of operation to increase the current. However, it has been observed that the mechanism of electron transfer across the quantum dot consistently breaks down for GHz frequencies, and this remains unexplained. Here, we present a novel analysis technique, combined with detailed modelling, to present a mechanism of high frequency breakdown in quantum dots as a rapidly-imparted momentum impulse. Such understanding aids future design and operation protocols, allowing their use in high frequency and real time quantum measurements and technologies.

cond-mat.mes-hall

An ambipolar single-charge pump in silicon

The mechanism of single-charge pumping using a dynamic quantum dot needs to be precisely understood for high-accuracy and universal operation toward applications to quantum current standards and quantum information devices. The type of charge carrier (electron or hole) is an important factor for determining the pumping accuracy, but it has been so far compared just using different devices that could have different potential landscapes. Here, we report measurements of a silicon ambipolar single-charge pump. It allows a comparison between the single-electron and single-hole pumps that share the entrance tunnel barrier, which is a critical part of the pumping operation. By changing the frequency and temperature, we reveal that the entrance barrier has a better energy selectivity in the single-hole pumping, leading to a pumping error rate better than that in the single-electron pumping up to 400 MHz. This result implies that the heavy effective mass of holes is related to the superior characteristics in the single-hole pumping, which would be an important finding for stably realizing accurate single-charge pumping operation.

cond-mat.mes-hall

Advances toward high-accuracy gigahertz operation of tunable-barrier single-hole pumps in silicon

Precise and reproducible current generation is key to realize quantum current standards in metrology. A promising candidate is a tunable-barrier single-charge pump, which can accurately transfer single charges one by one with an error rate of less than ppm level. Although several high-accuracy measurements have revealed such a high performance of the pumps, it is necessary to further pursue the possibility of high-precision operation toward reproducible generation of the pumping current in many devices. Here, we investigate in detail a silicon single-hole pumps, which are potentially expected to have a superior performance to single-electron pumps because of a heavy effective mass of holes. Temperature dependence measurements of current generated by the single-hole pump revealed a high energy selectivity of the tunnel barrier, which is a critical parameter to achieve high-accuracy operation. In addition, we applied the dynamic gate compensation technique to the single-hole pump and confirm the further performance improvement. Furthermore, we demonstrate gigahertz operation of a single-hole pump with an estimated lower bound of an error rate of around 0.01 ppm. These results imply a superior capability of single-hole pumps in silicon toward high-accuracy, high-speed, and stable single-charge pumping appropriate for not only metrological applications but also quantum device applications.

cond-mat.mes-hall

Coulomb collisions of hot and cold single electrons in series-coupled silicon single-electron pumps

Control of the Coulomb interaction between single electrons is vital for realizing quantum information processing using flying electrons and, particularly, for the realization of deterministic two-qubit operations. Since the strength of the Coulomb interaction increases with decreasing distance, a collision experiment of single electrons would be an ideal way to investigate it. Moreover, it would be useful to study such a Coulomb collision in silicon system, which has been extensively studied for qubit applications but so far has not been used for making Coulomb collisions at the single-electron level. Here, we made two series-coupled tunable-barrier single-electron pumps in silicon and used one to inject a hot single electron into the other pump in each pumping cycle. The hot single electron collides with a cold single electron confined in the other single-electron pump. We observed a current flow due to ejection not only of the hot single electron but also of the confined cold single electron. The latter leads to an excess current at a current plateau at a certain voltage range. We also found that increasing the number of cold electrons from one to two increased the cold-electron current by at least twofold. These results can be explained by a charging effect due to the Coulomb interaction. This observation is an important step toward quantum manipulation of flying single electrons in silicon.

cond-mat.mes-hall

Precision measurement of an electron pump at 2 GHz

A well-characterised sample of silicon tunable-barrier electron pump has been operated at a frequency of 2 GHz using a custom drive waveform, generating a pump current of 320 pA. Precision measurements of the current were made as a function of pump control parameters, using a blind protocol, over a 7-week campaign. The combined standard uncertainty for each 10 hour measurement was 0.1 parts per million. The pump current exhibits a plateau along the exit gate voltage flat to approximately 0.1 parts per million, but offset from ef by 0.2 parts per million. This offset may be a sign of errors in the current traceability chain, indicating a limit to the accuracy of small current scaling using existing methods based on cryogenic current comparators.

cond-mat.mes-hall

Realisation of a quantum current standard at liquid helium temperature with sub-ppm reproducibility

A silicon electron pump operating at the temperature of liquid helium has demonstrated repeatable operation with sub-ppm accuracy. The pump current, approximately 168 pA, is measured by three laboratories, and the measurements agree with the expected current ef within the uncertainties which range from 0.2 ppm to 1.3 ppm. All the measurements are carried out in zero applied magnetic field, and the pump drive signal is a sine wave. The combination of simple operating conditions with high accuracy demonstrates the possibility that an electron pump can operate as a current standard in a National Measurement Institute. We also discuss other practical aspects of using the electron pump as a current standard, such as testing its robustness to changes in the control parameters, and using a rapid tuning procedure to locate the optimal operation point..

physics.ins-det

Derivation of potential profile of a dynamic quantum dot

We report a method to derive the potential barrier profile shape in a dynamic quantum dot and show the loading statistics, and hence accuracy of electron transfer, depend significantly on the shape of the barrier. This method takes a further step towards tunable barrier shapes, which would greatly increase the accuracy of single electron sources, allowing the single electron current to be useful for quantum sensing, quantum information and metrology. We apply our method to the case of a tunable-barrier single-electron pump, an exemplary device that shows promise as a source of hot single electron wavepackets.

cond-mat.mes-hall

Evidence for universality of tunable-barrier electron pumps

We review recent precision measurements on semiconductor tunable-barrier electron pumps operating in a ratchet mode. Seven studies on five different designs of pumps have reported measurements of the pump current with relative total uncertainties around $10^{-6}$ or less. Combined with theoretical models of electron capture by the pumps, these experimental data exhibits encouraging evidence that the pumps operate according to a universal mechanism, independent of the details of device design. Evidence for robustness of the pump current against changes in the control parameters is at a more preliminary stage, but also encouraging, with two studies reporting robustness of the pump current against three or more parameters in the range of $\sim\!5 \times 10^{-7}$ to $\sim\!2 \times 10^{-6}$. This review highlights the need for an agreed protocol for tuning the electron pump for optimal operation, as well as more rigorous evaluations of the robustness in a wide range of pump designs.

cond-mat.mes-hall

Picosecond coherent electron motion in a silicon single-electron source

Understanding ultrafast coherent electron dynamics is necessary for application of a single-electron source to metrological standards, quantum information processing, including electron quantum optics, and quantum sensing. While the dynamics of an electron emitted from the source has been extensively studied, there is as yet no study of the dynamics inside the source. This is because the speed of the internal dynamics is typically higher than 100 GHz, beyond state-of-the-art experimental bandwidth. Here, we theoretically and experimentally demonstrate that the internal dynamics in a silicon singleelectron source comprising a dynamic quantum dot can be detected, utilising a resonant level with which the dynamics is read out as gate-dependent current oscillations. Our experimental observation and simulation with realistic parameters show that an electron wave packet spatially oscillates quantum-coherently at $\sim$ 200 GHz inside the source. Our results will lead to a protocol for detecting such fast dynamics in a cavity and offer a means of engineering electron wave packets. This could allow high-accuracy current sources, high-resolution and high-speed electromagnetic-field sensing, and high-fidelity initialisation of flying qubits.

cond-mat.mes-hall