arXiv subjects

Germain Garreau

Publications and source records attributed to Germain Garreau.

11 recordsLinked to original sources

arXiv2026

Cryogenic characterisation for the Nulling Interferometry Cryogenic Experiment (NICE)

The Nulling Interferometry Cryogenic Experiment (NICE) is an experimental testbed for the beam combiner of the Large Interferometer For Exoplanets (LIFE) space mission. Until now, progress on NICE has been confined to an ambient bench, where we have recorded progress in deep ($<10^{-5}$) nulls at wavelengths between 4 and 5 microns at 300 K. However, the ultimate goal and requirement of NICE is to repeat these measurements at the sensitivity levels expected for a planetary system, requiring deep cryogenic conditions at 15 K. Here, we describe the ``Ice Cube'' cryostat, a small version of the future NICE cryostat that is used for component and subsystem level cryogenic testing. This is interfaced with a measurement setup using a segmented aperture interferometer and a wavefront sensor. We will also describe the testing campaign for understanding the material and mounting challenges that will be faced when translating the warm bench to cryogenic operations.

astro-ph.IM↗

arXiv2026

A NICE (Nulling Interferometry Cryogenic Experiment) update: Beyond 1e-5 and towards cryogenic operation

The Nulling Interferometry Cryogenic Experiment (NICE) is a mid-infrared laboratory testbed at ETH Zürich that aims to not only reproduce the deep ($<1\times10^{-5}$) broadband nulls of the nulling testbeds of the early 2000s, but also at the required sensitivity levels expected for the LIFE space mission. This sensitivity enforces the experiment to go cryogenic at temperatures around 15 K; an ambitious task for an ultra-precise interferometer. We share our results of the ambient precursor experiment, demonstrating repeatable $<1\times10^{-5}$ nulls at a single wavelength and high throughput, and investigations into the nulling performance across a broader bandpass and with dual polarisation states. We will also highlight the push towards cryogenic operation, with the instalment of a new 15 K test cryostat that will inform our choices of materials and optomechanical mounting techniques.

astro-ph.IM↗

arXiv2026

The Nulling Interferometry Cryogenic Experiment (NICE): Architecture, requirements, and preliminary warm precursor results

The success of the Large Interferometer For Exoplanets (LIFE) space mission depends on measuring the faint mid-infrared emission spectra of exoplanets while suppressing the glare of a host star. This requires an instrument capable of high-contrast nulling interferometry with exceptional sensitivity. While previous testbeds have proven the principle of deep, stable nulls, they have not combined high contrast with the high throughput and cryogenic operation required for LIFE. Here, we present the architecture of the Nulling Interferometry Cryogenic Experiment (NICE), a mid-infrared nulling testbed, to increase the technological readiness of LIFE. We derive the laboratory requirements necessary to validate the LIFE beam combiner and present the optical design of NICE. Finally, we report results from the ambient \enquote{Warm Bench} precursor, which has successfully demonstrated the required null depth ($< 10^{-5}$) using a polarized narrowband 4.7 um source, and the required throughput (> 17%) using one of the two nulling channels.

astro-ph.IM↗

arXiv2024

Asgard/NOTT: water vapor and CO$_2$ atmospheric dispersion compensation system

To leverage the angular resolution of interferometry at high contrast, one must employ specialized beam-combiners called interferometric nullers. Nullers discard part of the astrophysical information to optimize the recording of light present in the dark fringe of the central source. Asgard/NOTT will deploy a beam-combination scheme offering good instrumental noise rejection when phased appropriately, but for which information is degenerate on the outputs, prompting a dedicated tuning strategy using the science detector. The dispersive effect of water vapor can be corrected with prisms forming a variable thickness of glass. But observations in the L band suffer from an additional and important chromatic effect due to longitudinal atmospheric dispersion coming from a resonance of CO2 at 4.3 micron. To compensate for this effect efficiently, a novel type of compensation device will be deployed leveraging a gas cell of variable length at ambient pressure. After reviewing the impact of water vapor and CO2, we present the design of this atmospheric dispersion compensation device and describe a strategy to maintain this tuning on-sky.

astro-ph.IM↗

arXiv2024

L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans

NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software.

astro-ph.IM↗

arXiv2024

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

astro-ph.IM↗

arXiv2024

Generic data reduction for nulling interferometry package: the grip of a single data reduction package on all the nulling interferometers

Nulling interferometry is a powerful observing technique to reach exoplanets and circumstellar dust at separations too small for direct imaging with single-dish telescopes and too large for indirect methods. With near-future instrumentation, it bears the potential to detect young, hot planets near the snow lines of their host stars. A future space mission could detect and characterize a large number of rocky, habitable-zone planets around nearby stars at thermal-infrared wavelengths. The null self-calibration is a method aiming at modelling the statistical distribution of the nulled signal. It has proven to be more sensitive and accurate than average-based data reduction methods in nulling interferometry. This statistical approach opens the possibility of designing a GPU-based Python package to reduce the data from any of these instruments, by simply providing the data and a simulator of the instrument. GRIP is a toolbox to reduce nulling and interferometric data based on the statistical self-calibration method. In this article, we present the main features of GRIP as well as applications on real data.

astro-ph.IM↗

arXiv2024

Asgard/NOTT: L-band nulling interferometry at the VLTI. II. Warm optical design and injection system

Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakthrough is the use of a photonic beam combiner, which only recently allowed the required theoretical raw contrast of $10^{-3}$ in this spectral range. Nulling interferometry observations of exoplanets also require a high degree of balancing between the four pupils of the VLTI in terms of intensity, phase, and polarization. The injection into the beam combiner and the requirements of nulling interferometry are driving the design of the warm optics and the injection system. The optical design up to the beam combiner is presented. It offers a technical solution to efficiently couple the light from the VLTI into the beam combiner. During the coupling, the objective is to limit throughput losses to 5% of the best expected efficiency for the injection. To achieve this, a list of different loss sources is considered with their respective impact on the injection efficiency. Solutions are also proposed to meet the requirements on beam balancing for intensity, phase, and polarization. The different properties of the design are listed, including the optics used, their alignment and tolerances, and their impact on the instrumental performances in terms of throughput and null depth. The performance evaluation gives an expected throughput loss of less than <6.4% of the best efficiency for the injection and a null depth of $\sim2.10^{-3}$, mainly from optical path delay errors outside the scope of this work.

astro-ph.IM↗

arXiv2023

High-angular resolution and high-contrast VLTI observations from Y to L band with the Asgard instrumental suite

The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: an instrumental suite comprised of four natively collaborating instruments: BIFROST, a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; NOTT, a nulling interferometer dedicated to imaging young nearby planetary systems in the L band; HEIMDALLR, an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimiser. These instruments share common goals and technologies. The goals are diverse astrophysical cases such as the study of the formation and evolution processes of binary systems, exoplanetary systems and protoplanetary disks, the characterization of orbital parameters and spin-orbit alignment of multiple systems, the characterization of the exoplanets, and the study of exozodiacal disks. Thus, the idea of this suite is to make the instruments interoperable and complementary to deliver unprecedented sensitivity and accuracy from the J to M bands to meet these goals. The interoperability of the Asgard instruments and their integration in the VLTI are major challenges for this project.

astro-ph.IM↗

arXiv2022

Asgard/NOTT: L-band nulling interferometry at the VLTI I. Simulating the expected high-contrast performance

Context: NOTT (formerly Hi-5) is a new high-contrast L' band (3.5-4.0 \textmu m) beam combiner for the VLTI with the ambitious goal to be sensitive to young giant exoplanets down to 5 mas separation around nearby stars. The performance of nulling interferometers in these wavelengths is affected both by fundamental noise from the background and by the contributions of instrumental noises. This motivates the development of end-to-end simulations to optimize these instruments. Aims: To enable the performance evaluation and inform the design of such instruments on the current and future infrastructures, taking into account the different sources of noise, and their correlation. Methods: SCIFYsim is an end-to-end simulator for single mode filtered beam combiners, with an emphasis on nulling interferometers. It is used to compute a covariance matrix of the errors. Statistical detection tests based on likelihood ratios are then used to compute compound detection limits for the instrument. Results: With the current assumptions on the performance of the wavefront correction systems, the errors are dominated by correlated instrumental errors down to stars of magnitude 6-7 in the L band, beyond which thermal background from the telescopes and relay system becomes dominant. Conclusions: SCIFYsim is suited to anticipate some of the challenges of design, tuning, operation and signal processing for integrated optics beam combiners. The detection limits found for this early version of NOTT simulation with the unit telescopes are compatible with detections at contrasts up to $10^5$ in the L band at separations of 5 to 80 mas around bright stars.

astro-ph.IM↗

arXiv2022

L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans

Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.

astro-ph.IM↗