Searcharxiv⌕ Search

arXiv subjects

Gideon Kassa

Publications and source records attributed to Gideon Kassa.

7 recordsLinked to original sources
arXiv2026

Long photoexcited carrier lifetime in a stable and earth-abundant zinc polyphosphide

Halide perovskites have revolutionized optoelectronics by demonstrating that long carrier lifetime can be achieved in materials processed in relatively uncontrolled environments, whereas conventional inorganic semiconductors typically suffer from short carrier lifetime unless very carefully prepared and postprocessed. Here, we report the discovery of exceptionally long photoexcited carrier lifetime in monoclinic ZnP2, effectively bridging the carrier lifetime gap between direct-gap inorganic semiconductors and halide perovskites. Through computational screening, ZnP2 is identified as a long carrier lifetime semiconductor characterized by an unconventional polyphosphide bonding, combining covalently bonded phosphorus chains and polar-covalent Zn-P tetrahedra. Experimentally, ZnP2 crystals synthesized from low-purity precursors exhibit bright band-to-band photoluminescence at 1.49 eV and carrier lifetimes of up to 1 $\mu$s. Further analysis reveals that the polyphosphide bonding of ZnP2 suppresses the formation of deep intrinsic defects, making it defect resistant. Combined with its remarkable environmental stability, ZnP2 presents a highly promising material for solar absorbers and light emitters. Our work illustrates that underexplored inorganic materials spaces with unusual chemical bonding hold great promise for discovering novel optoelectronic materials.

cond-mat.mtrl-sci↗
arXiv2025

CaCd$_2$P$_2$: A Visible-Light Absorbing Zintl Phosphide Stable under Photoelectrochemical Water Oxidation

A key bottleneck to solar fuels is the absence of stable and strongly absorbing photoelectrode materials for the oxygen evolution reaction (OER). Modern approaches generally trade off between stable but weakly absorbing materials, such as wide bandgap oxides, or strongly absorbing materials that rely on encapsulation for stability and are weakly catalytic, such as the III-V family of semiconductors. Of interest are materials like transition metal phosphides, such as FeP$_2$, that are known to undergo beneficial in situ surface transformations in the oxidative environment of OER, though stability has remained a primary hurdle. Here we report on CaCd$_2$P$_2$, a Zintl phase visible-light absorber with favorable 1.6 eV bandgap, that we identified using high-throughput computational screening. Using a combination of photoelectrochemical measurements, microscopy, and spectroscopy, we show that CaCd$_2$P$_2$ undergoes a light-stabilized surface transformation that renders it stable under alkaline OER conditions. We also show that the well known OER catalyst CoPi can act as a stable co-catalyst in synergy with the \textit{in-situ} CaCd$_2$P$_2$ surface. The light-induced stabilization that CaCd$_2$P$_2$ displays is in sharp contrast to the photocorrosion commonly observed in visible light-absorbing photoelectrodes. The broader AM$_2$P$_2$ family of Zintl phases offers a significant opportunity to explore stabilizing interface chemistry and re-design the manner in which low-bandgap semiconductors are used for photoelectrochemical energy conversion.

cond-mat.mtrl-sci↗
arXiv2025

BaCd2P2: a promising impurity-tolerant counterpart of GaAs for photovoltaics

BaCd2P2 (BCP) has been recently identified as a new solar absorber with promising optoelectronic properties. This work demonstrates that, despite having a low precursor purity (98.90% to 99.95%), synthesized BCP samples exhibit a promising photoconductive carrier lifetime up to 300 ns, an implied open-circuit voltage exceeding 1 V, and photoluminescence quantum yield in the order of 0.2%, comparable to a high-purity single-crystalline GaAs wafer. To better understand the underlying mechanisms of BCP's promising properties, its tolerance to intrinsic defects and extrinsic impurities is investigated using first-principles defect modeling and compared with that of the well-studied GaAs. The results show that the nonradiative recombination rates induced by dominant deep-level intrinsic antisite defects are lower in BCP than in GaAs under typical growth conditions. Further exploration of the impact of transition metal impurities in the raw materials used to make BCP and impurities introduced during its synthesis shows that most of these do not form deep-level nonradiative recombination centers. As an impurity-tolerant counterpart of GaAs, BCP demonstrates great potential to improve the cost-to-performance ratio of photovoltaics.

cond-mat.mtrl-sci↗
arXiv2025

A Map of the Zintl AM2Pn2 Compounds: Influence of Chemistry on Stability and Electronic Structure

The AM2Pn2 (A= Ca, Sr, Ba, Yb, Mg; M= Mn, Zn, Cd, Mg; and Pn=N, P, As, Sb, Bi) family of Zintl phases has been known as thermoelectric materials and has recently gained much attention for highly promising materials for solar absorbers in single junction and tandem solar cells. In this paper we will, from first-principles, explore the entire family of AM2Pn2 compounds in terms of their ground state structure, thermodynamic stability, and electronic structure. We also perform photoluminescence spectroscopy on bulk powder and thin film samples to verify our results, including the first measurements of the bandgaps of SrCd2P2 and CaCd2P2. The AM2Pn2 compounds exhibit broad stability, are mostly isostructural in the CaAl2Si2-type structure (P3m1), and cover a wide range of bandgaps from 0 to beyond 3 eV. This could make them useful for a variety of purposes, for which we propose several candidates, such as CaZn2N2 for tandem top cell solar absorbers and SrCd2Sb2 and CaZn2Sb2 for infrared detectors. By examining the band structures of the AM2Pn2, we find that Mg3Sb2 has the most promise as a thermoelectric material due to several off-{\Gamma} valence band pockets which are unique to it among the compositions studied here.

cond-mat.mtrl-sci↗
arXiv2024

Low-Temperature Synthesis of Stable CaZn$_2$P$_2$ Zintl Phosphide Thin Films as Candidate Top Absorbers

The development of tandem photovoltaics and photoelectrochemical solar cells requires new absorber materials with band gaps in the range of ~1.5-2.3 eV, for use in the top cell paired with a narrower-gap bottom cell. An outstanding challenge is finding materials with suitable optoelectronic and defect properties, good operational stability, and synthesis conditions that preserve underlying device layers. This study demonstrates the Zintl phosphide compound CaZn$_2$P$_2$ as a compelling candidate semiconductor for these applications. We prepare phase pure, 500 nm-thick CaZn$_2$P$_2$ thin films using a scalable reactive sputter deposition process at growth temperatures as low as 100 {\deg}C, which is desirable for device integration. UV-vis spectroscopy shows that CaZn$_2$P$_2$ films exhibit an optical absorptivity of ~10$^4$ cm$^-$$^1$ at ~1.95 eV direct band gap. Room-temperature photoluminescence (PL) measurements show near-band-edge optical emission, and time-resolved microwave conductivity (TRMC) measurements indicate a photoexcited carrier lifetime of ~30 ns. CaZn$_2$P$_2$ is highly stable in both ambient conditions and moisture, as evidenced by PL and TRMC measurements. Experimental data are supported by first-principles calculations, which indicate the absence of low-formation-energy, deep intrinsic defects. Overall, our study should motivate future work integrating this potential top cell absorber material into tandem solar cells.

cond-mat.mtrl-sci↗
arXiv2023

Discovery of the Zintl-phosphide BaCd$_{2}$P$_{2}$ as a long carrier lifetime and stable solar absorber

Thin-film photovoltaics offers a path to significantly decarbonize our energy production. Unfortunately, current materials commercialized or under development as thin-film solar cell absorbers are far from optimal as they show either low power conversion efficiency or issues with earth-abundance and stability. Entirely new and disruptive materials platforms are rarely discovered as the search for new solar absorbers is traditionally slow and serendipitous. Here, we use first principles high-throughput screening to accelerate this process. We identify new solar absorbers among known inorganic compounds using considerations on band gap, carrier transport, optical absorption but also on intrinsic defects which can strongly limit the carrier lifetime and ultimately the solar cell efficiency. Screening about 40,000 materials, we discover the Zintl-phosphide BaCd$_{2}$P$_{2}$ as a potential high-efficiency solar absorber. Follow-up experimental work confirms the predicted promises of BaCd$_{2}$P$_{2}$ highlighting an optimal band gap for visible absorption, bright photoluminescence, and long carrier lifetime of up to 30 ns even for unoptimized powder samples. Importantly, BaCd$_{2}$P$_{2}$ does not contain any critical elements and is highly stable in air and water. Our work opens an avenue for a new family of stable, earth-abundant, high-performance Zintl-based solar absorbers. It also demonstrates how recent advances in first principles computation can accelerate the search of photovoltaic materials by combining high-throughput screening with experiment.

cond-mat.mtrl-sci↗