SearcharxivSearch

arXiv subjects

Gilles Patriarche

Publications and source records attributed to Gilles Patriarche.

At least 19 recordsLinked to original sources

Crystal-phase quantum dots in AlGaAs nanowires

Crystal-phase quantum dots (CPQDs)$\unicode{x2014}$quantum dots in nanowires defined by crystal structure rather than material composition$\unicode{x2014}$constitute the only platform capable of fabricating quantum-dot arrays with the ultimate precision of a single atomic layer. This intrinsic control yields perfectly aligned quantum dots with atomically sharp interfaces, providing a unique pathway toward scalable quantum-dot-based photonic quantum technologies. To date, CPQDs have been studied primarily in binary semiconductors, such as InP and GaAs, where their emission linewidths are typically in the meV range, thereby limiting their technological potential. Here, we report, for the first time, CPQDs in AlGaAs nanowires and show bright single-photon emission with linewidths as narrow as 61 $μeV$ and low background emission, demonstrating optical quality well beyond typical CPQDs. We attribute this performance to a type-I band alignment, as suggested by an exciton lifetime of 1 ns, significantly shorter than that typically observed in type-II CPQDs. Additionally, we observe an exciton fine-structure splitting and a Zeeman splitting, as commonly observed in standard type-I self-assembled quantum dots.

cond-mat.mes-hall

AlGaAs nanowires as a universal platform for GaAs, InGaAs, and InAs quantum dots

Optical quantum dots (QDs) are central to photonic quantum technologies, with fabrication approaches tailored to different spectral ranges. A key challenge, however, is the realization of a unified platform$\unicode{x2014}$a single growth method combined with a host material offering a designable architecture$\unicode{x2014}$enabling wavelength tunability across the full emission range and co-integration of multiple quantum dots. Here, we introduce AlGaAs nanowires as a universal host for GaAs, InGaAs, and InAs QDs. Building on our previous demonstration of high-quality GaAs QDs, we realize InGaAs QDs with tunable emission by varying the growth duration from 2 to 5 s, achieving emission at 780 and 920 nm. We further showcase the platform's versatility for multi-quantum-dot devices by co-integrating two InGaAs QDs, as well as GaAs and InGaAs QDs within a single nanowire. Finally, we initiate a first step toward pure InAs QDs by growing a pristine InAs segment on AlGaAs nanowires, demonstrating material compatibility.

physics.optics

Direct Orientation Contrast Imaging of Anti-Phase Domains on III-V Materials Using Scanning Electron Microscopy

Direct orientation contrast imaging of zinc-blende III-V materials is studied using scanning electron microscopy. A quantitative approach is taken using a 3 μm thick orientation-patterned GaP grown on GaAs sample, studying the anti-phase domain contrast with respect to the electron beam energy and the tilt angle. A qualitative approach is taken for III-V grown on non-polar materials with and without chemical mechanical polishing. Finally, a processing of the acquired image for GaP on Si reveals in plane preferential anti-phase boundaries.

cond-mat.mtrl-sci

Unlocking extreme doping and strain in epitaxial monocrystalline silicon

Hyperdoping, overcoming the solubility limit of dopants in a crystalline semiconductor, is a fertile method for the enhancement of the electrical, structural and optical devices' performances and for the exploration of exotic phases such as superconductivity. We demonstrate an unprecedented control on the dopant concentration and lattice deformation via nanosecond laser doping in epitaxial boron doped silicon, achieving record carrier concentrations (8 at.%) and lattice deformations (3 %). Probing the microscopical hyperdoping limitations, we show that the relevant mechanisms are caught by a simple combinatorial model, which quantitatively explains both the experimental carrier concentration and lattice deformation evolution. First principle calculations complete and support such simple model. Indeed, at the high doping levels now attainable, the maximum carrier concentration is inherently limited by the probability of two or three substitutional dopants occupying neighboring lattice sites, forming partially inactive complexes that we detail. This description is valid in the case of perfect layers with no crystallographic defects and a fully substitutional dopant occupation, highlighting the quality of the epitaxial layers realized.

cond-mat.mtrl-sci

Accurate prediction of optical transitions in epitaxial InGaAs/InAlAs asymmetric coupled quantum well structures

Atomically-resolved Z-contrast and strain mappings are used to extract a model of the composition of an InGaAs/InAlAs asymmetric coupled quantum-well structure grown on InP using metal-organic vapor phase epitaxy. The model accounts for grading across the multiple alloy interfaces. The model is used to compute intersubband absorption in the structure. The simulation accurately predicts the experimental absorption spectrum of the structure within only a few meV, an almost ten-fold improvement over simulations using a square-band profile with nominal alloy compositions, and a significant step forward in accurate and predictive simulations of the optical properties epitaxial heterostructures for emission, modulation and detection in mid-infrared.

cond-mat.mtrl-sci

Full ab initio atomistic approach for morphology prediction of hetero-integrated crystals: A confrontation with experiments

Here, we propose a comprehensive first-principle atomistic approach to predict the Wulff-Kaischew equilibrium shape of crystals heterogeneously integrated on a dissimilar material. This method uses both reconstructed surface and interface absolute energies, as determined by density functional theory, to infer the morphology and wetting properties of Volmer-Weber islands over the whole range of accessible chemical potentials. The predicted equilibrium shapes of GaP crystals heterogeneously grown on Si, are found to be in good agreements with experimental observations performed by Transmission Electron Microscopy. Such method provides a tool for optimization of hetero-structured, multifunctional and smart materials and devices.

cond-mat.mtrl-sci

On the importance of Ni-Au-Ga interdiffusion in the formation of a Ni-Au / p-GaN ohmic contact

The Ni-Au-Ga interdiffusion mechanisms taking place during rapid thermal annealing (RTA) under oxygen atmosphere of a Ni-Au/p-GaN contact are investigated by high-resolution transmission electron microscopy (HR-TEM) coupled to energy dispersive X-ray spectroscopy (EDX). It is shown that oxygen-assisted, Ni diffusion to the top surface of the metallic contact through the formation of a nickel oxide (NiOx) is accompanied by Au diffusion down to the GaN surface, and by Ga out-diffusion through the GaN/metal interface. Electrical characterizations of the contact by Transmission Line Method (TLM) show that an ohmic contact is obtained as soon as a thin, Au-Ga interfacial layer is formed, even after complete diffusion of Ni or NiOx to the top surface of the contact. Our results clarify that the presence of Ni or NiOx at the interface is not the main origin of the ohmic-like behavior in such contacts. Auto-cleaning of the interface during the interdiffusion process may play a role, but TEM-EDX analysis evidences that the creation of Ga vacancies associated to the formation of a Ga-Au interfacial layer is crucial for reducing the Schottky barrier height, and maximizing the amount of current flowing through the contact.

cond-mat.mtrl-sci

Quasi van der Waals Epitaxy of Rhombohedral-stacked Bilayer WSe2 on GaP(111) Heterostructure

The growth of bilayers of two-dimensional (2D) materials on conventional 3D semiconductors results in 2D/3D hybrid heterostructures, which can provide additional advantages over more established 3D semiconductors while retaining some specificities of 2D materials. Understanding and exploiting these phenomena hinge on knowing the electronic properties and the hybridization of these structures. Here, we demonstrate that rhombohedral-stacked bilayer (AB stacking) can be obtained by molecular beam epitaxy growth of tungsten diselenide (WSe2) on gallium phosphide (GaP) substrate. We confirm the presence of 3R-stacking of the WSe2 bilayer structure using scanning transmission electron microscopy (STEM) and micro-Raman spectroscopy. Also, we report high-resolution angle-resolved photoemission spectroscopy (ARPES) on our rhombohedral-stacked WSe2 bilayer grown on GaP(111)B substrate. Our ARPES measurements confirm the expected valence band structure of WSe2 with the band maximum located at the gamma point of the Brillouin zone. The epitaxial growth of WSe2 on GaP(111)B heterostructures paves the way for further studies of the fundamental properties of these complex materials, as well as prospects for their implementation in devices to exploit their promising electronic and optical properties.

cond-mat.mes-hall

Highly photostable Zn-treated halide perovskite nanocrystals for efficient single photon generation

Achieving pure single-photon emission is essential for a range of quantum technologies, from optical quantum computing to quantum key distribution to quantum metrology. Among solid-state quantum emitters, colloidal lead halide perovskite (LHP) nanocrystals (NCs) have garnered significant attention due to their interesting structural and optical properties, which make them appealing single-photon sources (SPSs). However, their practical utilization for quantum technology applications has been hampered by environment-induced instabilities. In this study, we fabricate and characterize in a systematic manner Zn-treated $CsPbBr_3$ colloidal NCs obtained through $Zn^{2+}$ ion doping at the Pb-site, demonstrating improved stability under dilution and illumination. These doped NCs exhibit high single-photon purity, reduced blinking on a sub-millisecond timescale and stability of the bright state for excitation powers well above the saturation levels. Our findings highlight the potential of this synthesis approach to optimize the performance of LHP-based SPSs, opening up interesting prospects for their integration into nanophotonic systems for quantum technology applications.

quant-ph

Wetting of Ga droplets in SiO$_2$/Si cavities: Application to self-assisted GaAs nanowire growth

In this paper we compute and compare the surface energy of various Ga liquid droplets wetting a cylindrical cavity in various configurations. While for some of these configurations the surface energy can be computed explicitely for others numerical computation is needed. Motivated by the results obtained for the cylindrical cavities we explore the case of the more realistic situation, conical cavities. Our results provide a relation between the geometry of the conical cavity and the equilibirum wetting angles of the droplet on the bottom and on the sidewall of the cavity which insure the dewetting of the lateral surface. This is an important result toward the control of the verticality during the nanowire growth by the vapor liquid solid method.

cond-mat.mtrl-sci

Continuous-Wave Second-Harmonic Generation in Orientation-Patterned GaP Waveguides at Telecom Wavelengths

A new process to produce Orientation-Patterned Gallium Phosphide (OP-GaP) on GaAs with almost perfectly parallel domain boundaries is presented. Taking advantage of the chemical selectivity between phosphides and arsenides, OP-GaP is processed into suspended shallow-ridge waveguides. Efficient Second-Harmonic Generation from Telecom wavelengths is achieved in both Type-I and Type-II polarisation configurations. The highest observed conversion efficiency is \SI{200}{\percent\per\watt\per\centi\meter\squared}, with a bandwidth of \SI{2.67}{\nano\meter} in a \SI{1}{\milli\meter}-long waveguide. The variation of the conversion efficiency with wavelength closely follows a squared cardinal sine function, in excellent agreement with theory, confirming the good uniformity of the poling period over the entire length of the waveguide.

physics.optics

Defect free strain relaxation of microcrystals on mesoporous patterned silicon

A perfectly compliant substrate would allow the monolithic integration of high-quality semiconductor materials such as Ge and III-V on Silicon (Si) substrate, enabling novel functionalities on the well-established low-cost Si technology platform. Here, we demonstrate a compliant Si substrate allowing defect-free epitaxial growth of lattice mismatched materials. The method is based on the deep patterning of the Si substrate to form micrometer-scale pillars and subsequent electrochemical porosification. The investigation of the epitaxial Ge crystalline quality by X-ray diffraction, transmission electron microscopy and etch-pits counting demonstrates the full elastic relaxation of defect-free microcrystals. The achievement of dislocation free heteroepitaxy relies on the interplay between elastic deformation of the porous micropillars, set under stress by the lattice mismatch between Ge and Si, and on the diffusion of Ge into the mesoporous patterned substrate attenuating the mismatch strain at the Ge/Si interface.

cond-mat.mtrl-sci

Regulated dynamics with two-monolayer steps in vapor-solid-solid growth of nanowires

The growth of ZnTe nanowires and ZnTe-CdTe nanowire heterostructures is studied by \emph{in situ} transmission electron microscopy. We describe the shape, and the change of shape, of the solid gold nanoparticle during vapor-solid-solid growth. We show the balance between one-monolayer and two-monolayer steps which characterizes the vapor-liquid-solid and vapor-solid-solid growth modes of ZnTe. We discuss the role of the mismatch strain and lattice coincidence between gold and ZnTe on the predominance of two-monolayer steps during vapor-solid-solid growth, and on the subsequent self-regulation of the step dynamics. Finally, the formation of an interface between CdTe and ZnTe is described.

cond-mat.mtrl-sci

Highly linear polarized emission at telecom bands in InAs/InP quantum dot-nanowires by geometry tailoring

Nanowire (NW)-based opto-electronic devices require certain engineering in the NW geometry to realize polarized-dependent light sources and photodetectors. We present a growth procedure to produce InAs/InP quantum dot-nanowires (QD-NWs) with an elongated top-view cross-section relying on the vapor-liquid-solid method using molecular beam epitaxy. By interrupting the rotation of the sample during the radial growth sequence of the InP shell, hexagonal asymmetric (HA) NWs with long/short cross-section axes were obtained instead of the usual symmetrical shape. Polarization-resolved photoluminescence measurements have revealed a significant influence of the asymmetric shaped NWs on the InAs QD emission polarization with the photons being mainly polarized parallel to the NW long cross-section axis. A degree of linear polarization (DLP) up to 91% is obtained, being at the state of the art for the reported DLP values from QD-NWs. More importantly, the growth protocol herein is fully compatible with the current applications of HA NWs covering a wide range of devices such as polarized light emitting diodes and photodetectors.

cond-mat.mtrl-sci

Relaxation mechanism of GaP grown on 001 Sisubstrates: influence of defects on the growth of AlGaPlayers on GaP/Si templates

The mechanical stability of commercial GaP/Si templates during thermal an-nealing and subsequent MOCVD growth of GaP and AlGaP is investigated.Although the GaP layer of the template originally presents an excellent surfacemorphology, annealing at high enough temperatures to remove the native oxideprior to growth leads to plastic relaxation, accompanied by a variety of defects,including a dense grid of micro-twins. These micro-twins detrimentally affectGaP and AlGaP layers grown subsequently on the template.

cond-mat.mtrl-sci

Dynamic formation of spherical voids crossing linear defects

A predictive model for the evolution of porous Ge layer upon thermal treatment is reported. We represent an idealized etched dislocation core as an axially symmetric elongated hole and computed its dynamics during annealing. Numerical simulations of the shape change of a completely spherical void via surface diffusion have been performed. Simulations and experiments show individual large spherical voids, aligned along the dislocation core. The creation of voids could facilitate interactions between dislocations, enabling the dislocation network to change its connectivity in a way that facilitates the subsequent annihilation of dislocation segments. This confirms that thermally activated processes such as state diffusion of porous materials provide mechanisms whereby the defects are removed or arranged in configurations of lower energy. This model is intended to be indicative, and more detailed experimental characterization of process parameters such as annealing temperature and time, and could estimate the annealing time for given temperatures, or vice versa, with the right parameters.

cond-mat.mtrl-sci

Reduced lasing thresholds in GeSn microdisk cavities with defect management of the optically active region

GeSn alloys are nowadays considered as the most promising materials to build Group IV laser sources on silicon (Si) in a full complementary metal oxide semiconductor-compatible approach. Recent GeSn laser developments rely on increasing the band structure directness, by increasing the Sn content in thick GeSn layers grown on germanium (Ge) virtual substrates (VS) on Si. These lasers nonetheless suffer from a lack of defect management and from high threshold densities. In this work we examine the lasing characteristics of GeSn alloys with Sn contents ranging from 7 \% to 10.5 \%. The GeSn layers were patterned into suspended microdisk cavities with different diameters in the 4-\SI{8 }{\micro\meter} range. We evidence direct band gap in GeSn with 7 \% of Sn and lasing at 2-\SI{2.3 }{\micro\meter} wavelength under optical injection with reproducible lasing thresholds around \SI{10 }{\kilo\watt\per\square\centi\meter}, lower by one order of magnitude as compared to the literature. These results were obtained after the removal of the dense array of misfit dislocations in the active region of the GeSn microdisk cavities. The results offer new perspectives for future designs of GeSn-based laser sources.

physics.optics

Highly Ordered Boron Nitride/Epigraphene Epitaxial Films on Silicon Carbide by Lateral Epitaxial Deposition

Realizing high-performance nanoelectronics requires control of materials at the nanoscale. Methods to produce high quality epitaxial graphene (EG) nanostructures on silicon carbide are known. The next step is to grow Van der Waals semiconductors on top of EG nanostructures. Hexagonal boron nitride (h-BN) is a wide bandgap semiconductor with a honeycomb lattice structure that matches that of graphene, making it ideally suited for graphene-based nanoelectronics. Here, we describe the preparation and characterization of multilayer h-BN grown epitaxially on EG using a migration-enhanced metalorganic vapor phase epitaxy process. As a result of the lateral epitaxial deposition (LED) mechanism, the grown h-BN/EG heterostructures have highly ordered epitaxial interfaces, as desired in order to preserve the transport properties of pristine graphene. Atomic scale structural and energetic details of the observed row-by-row, growth mechanism of the 2D epitaxial h-BN film are analyzed through first-principles simulations, demonstrating one-dimensional nucleation-free-energy-barrierless growth. This industrially relevant LED process can be applied to a wide variety of van der Waals materials.

cond-mat.mtrl-sci