arXiv subjects

Giovanni Finocchio

Publications and source records attributed to Giovanni Finocchio.

At least 55 records · Page 3Linked to original sources

arXiv2023

A magneto-mechanical accelerometer based on magnetic tunnel junctions

Accelerometers have widespread applications and are an essential component in many areas such as automotive, consumer electronics and industrial applications. Most commercial accelerometers are based on micro-electromechanical system (MEMS) that are limited in downscaling and power consumption. Spintronics-based accelerometers have been proposed as alternatives, however, current proposals suffer from design limitations that result in reliability issues and high cost. Here we propose spintronic accelerometers with magnetic tunnel junctions (MTJs) as building block, which map accelerations into a measurable voltage across the MTJ terminals. The device exploits elastic and dipolar coupling as a sensing mechanism and the spintronic diode effect for the direct read out of the acceleration. The proposed technology represents a potentially competitive and scalable solution to current capacitive MEMS-based approaches that could lead to a step forward in many of the commercial applications.

physics.app-ph↗

arXiv2023

Ultra-sensitive voltage-controlled skyrmion-based spintronic diode

We have designed a passive spintronic diode based on a single skyrmion stabilized in a magnetic tunnel junction and studied its dynamics induced by voltage-controlled anisotropy (VCMA) and Dzyaloshinskii-Moriya interaction (VDMI). We have demonstrated that the sensitivity (rectified voltage over input microwave power) with realistic physical parameters and geometry can be larger than 10 kV/W which is one order of magnitude better than diodes employing a uniform ferromagnetic state. Our numerical and analytical results on the VCMA and VDMI-driven resonant excitation of skyrmions beyond the linear regime reveal a frequency dependence on the amplitude and no efficient parametric resonance. Skyrmions with a smaller radius produced higher sensitivities, demonstrating the efficient scalability of skyrmion-based spintronic diodes. These results pave the way for designing passive ultra-sensitive and energy efficient skyrmion-based microwave detectors.

cond-mat.mes-hall↗

arXiv2023

Manipulation of magnetic solitons under the influence of DMI gradients

Magnetic solitons are promising for applications due to their intrinsic properties such as small size, topological stability, ultralow power manipulation and potentially ultrafast operations. To date, research has focused on the manipulation of skyrmions, domain walls, and vortices by applied currents. The discovery of new methods to control magnetic parameters, such as the interfacial Dzyaloshinskii-Moriya interaction (DMI) by strain, geometry design, temperature gradients, and applied voltages promises new avenues for energetically efficient manipulation of magnetic structures. The latter has shown significant progress in 2d material-based technology. In this work, we present a comprehensive study using numerical and analytical methods of the stability and motion of different magnetic textures under the influence of DMI gradients. Our results show that under the influence of linear DMI gradients, Néel and Bloch-type skyrmions and radial vortex exhibit motion with finite skyrmion Hall angle, while the circular vortex undergoes expulsion dynamics. This work provides a deeper and crucial understanding of the stability and gradient-driven dynamics of magnetic solitons, and paves the way for the design of alternative low-power sources of magnetization manipulation in the emerging field of 2d materials.

cond-mat.mes-hall↗

arXiv2023

A spintronic Huxley-Hodgkin-analogue neuron implemented with a single magnetic tunnel junction

Spiking neural networks aim to emulate the brain's properties to achieve similar parallelism and high-processing power. A caveat of these neural networks is the high computational cost to emulate, while current proposals for analogue implementations are energy inefficient and not scalable. We propose a device based on a single magnetic tunnel junction to perform neuron firing for spiking neural networks without the need of any resetting procedure. We leverage two physics, magnetism and thermal effects, to obtain a bio-realistic spiking behavior analogous to the Huxley-Hodgkin model of the neuron. The device is also able to emulate the simpler Leaky-Integrate and Fire model. Numerical simulations using experimental-based parameters demonstrate firing frequency in the MHz to GHz range under constant input at room temperature. The compactness, scalability, low cost, CMOS-compatibility, and power efficiency of magnetic tunnel junctions advocate for their broad use in hardware implementations of spiking neural networks.

cond-mat.mes-hall↗

arXiv2023

Evaluating spintronics-compatible implementations of Ising machines

The commercial and industrial demand for the solution of hard combinatorial optimization problems push forward the development of efficient solvers. One of them is the Ising machine which can solve combinatorial problems mapped to Ising Hamiltonians. In particular, spintronic hardware implementations of Ising machines can be very efficient in terms of area and performance, and are relatively low-cost considering the potential to create hybrid CMOS-spintronic technology. Here, we perform a comparison of coherent and probabilistic paradigms of Ising machines on several hard Max-Cut instances, analyzing their scalability and performance at software level. We show that probabilistic Ising machines outperform coherent Ising machines in terms of the number of iterations required to achieve the problem s solution. Nevertheless, high frequency spintronic oscillators with sub-nanosecond synchronization times could be very promising as ultrafast Ising machines. In addition, considering that a coherent Ising machine acts better for Max-Cut problems because of the absence of the linear term in the Ising Hamiltonian, we introduce a procedure to encode Max-3SAT to Max-Cut. We foresee potential synergic interplays between the two paradigms.

cond-mat.other↗

arXiv2023

A full-stack view of probabilistic computing with p-bits: devices, architectures and algorithms

The transistor celebrated its 75${}^\text{th}$ birthday in 2022. The continued scaling of the transistor defined by Moore's Law continues, albeit at a slower pace. Meanwhile, computing demands and energy consumption required by modern artificial intelligence (AI) algorithms have skyrocketed. As an alternative to scaling transistors for general-purpose computing, the integration of transistors with unconventional technologies has emerged as a promising path for domain-specific computing. In this article, we provide a full-stack review of probabilistic computing with p-bits as a representative example of the energy-efficient and domain-specific computing movement. We argue that p-bits could be used to build energy-efficient probabilistic systems, tailored for probabilistic algorithms and applications. From hardware, architecture, and algorithmic perspectives, we outline the main applications of probabilistic computers ranging from probabilistic machine learning and AI to combinatorial optimization and quantum simulation. Combining emerging nanodevices with the existing CMOS ecosystem will lead to probabilistic computers with orders of magnitude improvements in energy efficiency and probabilistic sampling, potentially unlocking previously unexplored regimes for powerful probabilistic algorithms.

cs.ET↗

arXiv2022

Identifiying the domain wall spin structure in current-induced switching of antiferromagnetic NiO/Pt

The understanding of antiferromagnetic domain walls, which are the interface between domains with different Néel order orientations, is a crucial aspect to enable the use of antiferromagnetic materials as active elements in future spintronic devices. In this work, we demonstrate that in antiferromagnetic NiO/Pt bilayers circular domain structures can be generated by switching driven by electrical current pulses. The generated domains are T-domains, separated from each other by a domain wall whose spins are pointing toward the average direction of the two T-domains rather than the common axis of the two planes. Interestingly, this direction is the same for the whole circular domain indicating the absence of strong Lifshitz invariants. The domain wall can be micromagnetically modeled by strain distributions in the NiO thin film induced by the MgO substrate, deviating from the bulk anisotropy. From our measurements we determine the domain wall width to have a full width at half maximum of $Δ= 98 \pm 10$ nm, demonstrating strong confinement.

cond-mat.mtrl-sci↗

arXiv2022

Tuning the coexistence regime of incomplete and tubular skyrmions in ferro/ferri/ferromagnetic trilayers

The development of skyrmionic devices requires a suitable tuning of material parameters in order to stabilize skyrmions and control their density. It has been demonstrated recently that different skyrmion types can be simultaneously stabilized at room temperature in heterostructures involving ferromagnets, ferrimagnets and heavy metals, offering a new platform of coding binary information in the type of skyrmion instead of the presence/absence of skyrmions. Here, we tune the energy landscape of the two skyrmion types in such heterostructures by engineering the geometrical and material parameters of the individual layers. We find that a fine adjustment of the ferromagnetic layer thickness and thus its magnetic anisotropy, allows the trilayer system to support either one of the skyrmion types or the coexistence of both and with varying densities.

cond-mat.mtrl-sci↗

arXiv2022

Physics-inspired Ising Computing with Ring Oscillator Activated p-bits

The nearing end of Moore's Law has been driving the development of domain-specific hardware tailored to solve a special set of problems. Along these lines, probabilistic computing with inherently stochastic building blocks (p-bits) have shown significant promise, particularly in the context of hard optimization and statistical sampling problems. p-bits have been proposed and demonstrated in different hardware substrates ranging from small-scale stochastic magnetic tunnel junctions (sMTJs) in asynchronous architectures to large-scale CMOS in synchronous architectures. Here, we design and implement a truly asynchronous and medium-scale p-computer (with $\approx$ 800 p-bits) that closely emulates the asynchronous dynamics of sMTJs in Field Programmable Gate Arrays (FPGAs). Using hard instances of the planted Ising glass problem on the Chimera lattice, we evaluate the performance of the asynchronous architecture against an ideal, synchronous design that performs parallelized (chromatic) exact Gibbs sampling. We find that despite the lack of any careful synchronization, the asynchronous design achieves parallelism with comparable algorithmic scaling in the ideal, carefully tuned and parallelized synchronous design. Our results highlight the promise of massively scaled p-computers with millions of free-running p-bits made out of nanoscale building blocks such as stochastic magnetic tunnel junctions.

cs.AR↗

arXiv2022

Temperature gradient-driven magnetic skyrmion motion

The static and dynamic properties of skyrmions have recently received increased attention due to the potential application of skyrmions as information carriers and for unconventional computing. While the current-driven dynamics has been explored deeply, both theoretically and experimentally, the theory of temperature gradient-induced dynamics - Skyrmion-Caloritronics - is still at its early stages of development. Here, we move the topic forward by identifying the role of entropic torques due to the temperature dependence of magnetic parameters. Our results show that, skyrmions move towards higher temperatures in single-layer ferromagnets with interfacial Dzyaloshinski-Moriya interactions, whereas, in multilayers, they move to lower temperatures. We analytically and numerically demonstrate that the opposite behaviors are due to different scaling relations of the material parameters as well as a non-negligible magnetostatic field gradient in multilayers. We also find a spatially dependent skyrmion Hall angle in multilayers hosting hybrid skyrmions due to variations of the thickness dependent chirality as the skyrmion moves along the temperature gradient.

cond-mat.mes-hall↗

arXiv2022

Massively Parallel Probabilistic Computing with Sparse Ising Machines

Inspired by the developments in quantum computing, building domain-specific classical hardware to solve computationally hard problems has received increasing attention. Here, by introducing systematic sparsification techniques, we demonstrate a massively parallel architecture: the sparse Ising Machine (sIM). Exploiting sparsity, sIM achieves ideal parallelism: its key figure of merit - flips per second - scales linearly with the number of probabilistic bits (p-bit) in the system. This makes sIM up to 6 orders of magnitude faster than a CPU implementing standard Gibbs sampling. Compared to optimized implementations in TPUs and GPUs, sIM delivers 5-18x speedup in sampling. In benchmark problems such as integer factorization, sIM can reliably factor semiprimes up to 32-bits, far larger than previous attempts from D-Wave and other probabilistic solvers. Strikingly, sIM beats competition-winning SAT solvers (by 4-700x in runtime to reach 95% accuracy) in solving 3SAT problems. Even when sampling is made inexact using faster clocks, sIM can find the correct ground state with further speedup. The problem encoding and sparsification techniques we introduce can be applied to other Ising Machines (classical and quantum) and the architecture we present can be used for scaling the demonstrated 5,000-10,000 p-bits to 1,000,000 or more through analog CMOS or nanodevices.

cs.ET↗

arXiv2022

Antiferromagnetic parametric resonance driven by voltage-controlled magnetic anisotropy

Voltage controlled magnetic anisotropy (VCMA) is a low-energy alternative to manipulate the ferromagnetic state, which has been recently considered also in antiferromagnets (AFMs). Here, we theoretically demonstrate that VCMA can be used to excite linear and parametric resonant modes in easy-axis AFMs with perpendicular anisotropy, thus opening the way for an efficient electrical control of the Neel vector, and for detection of high-frequency dynamics. Our work leads to two key results: (i) VCMA parametric pumping experiences the so-called exchange enhancement of the coupling efficiency and, thus, is 1-2 orders of magnitude more efficient than microwave magnetic fields or spin-orbit-torques, and (ii) it also allows for zero-field parametric resonance, which cannot be achieved by other parametric pumping mechanisms in AFMs with out-of-plane easy axis. Therefore, we demonstrate that the VCMA parametric pumping is the most promising method for coherent excitation and manipulation of AFM order in perpendicular easy-axis AFMs.

cond-mat.mes-hall↗

arXiv2022

Spintronics-compatible approach to solving maximum satisfiability problems with probabilistic computing, invertible logic and parallel tempering

The search of hardware-compatible strategies for solving NP-hard combinatorial optimization problems (COPs) is an important challenge of today s computing research because of their wide range of applications in real world optimization problems. Here, we introduce an unconventional scalable approach to face maximum satisfiability problems (Max-SAT) which combines probabilistic computing with p-bits, parallel tempering, and the concept of invertible logic gates. We theoretically show the spintronic implementation of this approach based on a coupled set of Landau-Lifshitz-Gilbert equations, showing a potential path for energy efficient and very fast (p-bits exhibiting ns time scale switching) architecture for the solution of COPs. The algorithm is benchmarked with hard Max-SAT instances from the 2016 Max-SAT competition (e.g., HG-4SAT-V150-C1350-1.cnf which can be described with 2851 p-bits), including weighted Max-SAT and Max-Cut problems.

cond-mat.mes-hall↗

arXiv2022

Computing with injection-locked spintronic diodes

Spintronic diodes (STDs) are emerging as a technology for the realization of high-performance microwave detectors. The key advantages of such devices are their high sensitivity, capability to work at low input power, and compactness. In this work, we show a possible use of STDs for neuromorphic computing expanding the realm of their functionalities to implement analog multiplication, which is a key operation in convolutional neural networks (CNN). In particular, we introduce the concept of degree of rectification (DOR) in injection-locked STDs. Micromagnetic simulations are used to design and identify the working range of the STDs for the implementation of the DOR. Previous experimental data confirm the applicability of the proposed solution, which is tested in image processing and in a CNN that recognizes handwritten digits.

cond-mat.mes-hall↗

arXiv2022

Reliability of Neural Networks Based on Spintronic Neurons

Spintronic technology is emerging as a direction for the hardware implementation of neurons and synapses of neuromorphic architectures. In particular, a single spintronic device can be used to implement the nonlinear activation function of neurons. Here, we propose how to implement spintronic neurons with a sigmoidal and ReLU-like activation functions. We then perform a numerical experiment showing the robustness of neural networks made by spintronic neurons all having different activation functions to emulate device-to-device variations in a possible hardware implementation of the network. Therefore, we consider a vanilla neural network implemented to recognize the categories of the Mixed National Institute of Standards and Technology database, and we show an average accuracy of 98.87 % in the test dataset which is very close to the 98.89% as obtained for the ideal case (all neurons have the same sigmoid activation function). Similar results are also obtained with neurons having a ReLU-like activation function.

cond-mat.mes-hall↗

arXiv2021

Automatic crack classification by exploiting statistical event descriptors for Deep Learning

In modern building infrastructures, the chance to devise adaptive and unsupervised data-driven health monitoring systems is gaining in popularity due to the large availability of big data from low-cost sensors with communication capabilities and advanced modeling tools such as Deep Learning. The main purpose of this paper is to combine deep neural networks with Bidirectional Long Short Term Memory and advanced statistical analysis involving Instantaneous Frequency and Spectral Kurtosis to develop an accurate classification tool for tensile, shear and mixed modes originated from acoustic emission events (cracks). We investigated on effective event descriptors to capture the unique characteristics from the different types of modes. Tests on experimental results confirm that this method achieves promising classification among different crack events and can impact on the design of future on structural health monitoring (SHM) technologies. This approach is effective to classify incipient damages with 92% of accuracy, which is advantageous to plan maintenance.

cs.LG↗

arXiv2021

Observation of current-induced switching in non-collinear antiferromagnetic IrMn$_3$ by differential voltage measurements

There is accelerating interest in developing memory devices using antiferromagnetic (AFM) materials, motivated by the possibility for electrically controlling AFM order via spin-orbit torques, and its read-out via magnetoresistive effects. Recent studies have shown, however, that high current densities create non-magnetic contributions to resistive switching signals in AFM/heavy metal (AFM/HM) bilayers, complicating their interpretation. Here we introduce an experimental protocol to unambiguously distinguish current-induced magnetic and nonmagnetic switching signals in AFM/HM structures, and demonstrate it in IrMn$_3$/Pt devices. A six-terminal double-cross device is constructed, with an IrMn$_3$ pillar placed on one cross. The differential voltage is measured between the two crosses with and without IrMn$_3$ after each switching attempt. For a wide range of current densities, reversible switching is observed only when write currents pass through the cross with the IrMn$_3$ pillar, eliminating any possibility of non-magnetic switching artifacts. Micromagnetic simulations support our findings, indicating a complex domain-mediated switching process.

cond-mat.mes-hall↗

arXiv2021

Magnetization Reversal Signatures of Hybrid and Pure Néel Skyrmions in Thin Film Multilayers

We report a study of the magnetization reversals and skyrmion configurations in two systems - Pt/Co/MgO and Ir/Fe/Co/Pt multilayers, where magnetic skyrmions are stabilized by a combination of dipolar and Dzyaloshinskii-Moriya interactions (DMI). First Order Reversal Curve (FORC) diagrams of low-DMI Pt/Co/MgO and high-DMI Ir/Fe/Co/Pt exhibit stark differences, which are identified by micromagnetic simulations to be indicative of hybrid and pure Néel skyrmions, respectively. Tracking the evolution of FORC features in multilayers with dipolar interactions and DMI, we find that the negative FORC valley, typically accompanying the positive FORC peak near saturation, disappears under both reduced dipolar interactions and enhanced DMI. As these conditions favor the formation of pure Neel skyrmions, we propose that the resultant FORC feature - a single positive FORC peak near saturation - can act as a fingerprint for pure Néel skyrmions in multilayers. Our study thus expands on the utility of FORC analysis as a tool for characterizing spin topology in multilayer thin films.

cond-mat.mes-hall↗