arXiv subjects

Giovanni Stabile

Publications and source records attributed to Giovanni Stabile.

At least 37 records · Page 2Linked to original sources

arXiv2024

Stochastic Parameter Prediction in Cardiovascular Problems

Patient-specific modeling of cardiovascular flows with high-fidelity is challenging due to its dependence on accurately estimated velocity boundary profiles, which are essential for precise simulations and directly influence wall shear stress calculations - key in predicting cardiovascular diseases like atherosclerosis. This data, often derived from in vivo modalities like 4D flow MRI, suffers from low resolution and noise. To address this, we employ a stochastic data assimilation technique that integrates computational fluid dynamics with an advanced Ensemble-based Kalman filter, enhancing model accuracy while accounting for uncertainties. Our approach sequentially collects velocity data over time within the vascular model, enabling real-time refinement of unknown boundary estimations. The mathematical model uses the incompressible Navier-Stokes equation to simulate aortic blood flow. We consider unknown boundaries as constant, time-dependent, and space-time dependent in two- and three-dimensional models. In our 2-dimensional model, relative errors were as low as 0.996\% for constant boundaries and up to 2.63\% and 2.61\% for time-dependent and space-time dependent boundaries, respectively, over an observation span of two-time steps. For the 3-dimensional patient-specific model, the relative error was 7.37\% for space-time dependent boundaries. By refining the velocity boundary profile, our method improves wall shear stress predictions, enhancing the accuracy and reliability of models specific to individual cardiovascular patients. These advancements could contribute to better diagnosis and treatment of cardiovascular diseases.

math.NA↗

arXiv2024

A hybrid reduced-order model for segregated fluid-structure interaction solvers in an ALE approach at high Reynolds number

This study introduces a first step for constructing a hybrid reduced-order models (ROMs) for segregated fluid-structure interaction in an Arbitrary Lagrangian-Eulerian (ALE) approach at a high Reynolds number using the Finite Volume Method (FVM). The ROM is driven by proper orthogonal decomposition (POD) with hybrid techniques that combines the classical Galerkin projection and two data-driven methods (radial basis networks , and neural networks/ long short term memory). Results demonstrate the ROM ability to accurately capture the physics of fluid-structure interaction phenomena. This approach is validated through a case study focusing on flow-induced vibration (FIV) of a pitch-plunge airfoil at a high Reynolds number 10000000.

physics.flu-dyn↗

arXiv2024

Parametric Intrusive Reduced Order Models enhanced with Machine Learning Correction Terms

In this paper, we propose an equation-based parametric Reduced Order Model (ROM), whose accuracy is improved with data-driven terms added into the reduced equations. These additions have the aim of reintroducing contributions that in standard ROMs are not taken into account. In particular, in this work we consider two types of contributions: the turbulence modeling, added through a reduced-order approximation of the eddy viscosity field, and the correction model, aimed to re-introduce the contribution of the discarded modes. Both approaches have been investigated in previous works and the goal of this paper is to extend the model to a parametric setting making use of ad-hoc machine learning procedures. More in detail, we investigate different neural networks' architectures, from simple dense feed-forward to Long-Short Term Memory neural networks, in order to find the most suitable model for the re-introduced contributions. We tested the methods on two test cases with different behaviors: the periodic turbulent flow past a circular cylinder and the unsteady turbulent flow in a channel-driven cavity. In both cases, the parameter considered is the Reynolds number and the machine learning-enhanced ROM considerably improved the pressure and velocity accuracy with respect to the standard ROM.

math.NA↗

arXiv2024

A segregated reduced order model of a pressure-based solver for turbulent compressible flows

This article provides a reduced-order modelling framework for turbulent compressible flows discretized by the use of finite volume approaches. The basic idea behind this work is the construction of a reduced-order model capable of providing closely accurate solutions with respect to the high fidelity flow fields. Full-order solutions are often obtained through the use of segregated solvers (solution variables are solved one after another), employing slightly modified conservation laws so that they can be decoupled and then solved one at a time. Classical reduction architectures, on the contrary, rely on the Galerkin projection of a complete Navier-Stokes system to be projected all at once, causing a mild discrepancy with the high order solutions. This article relies on segregated reduced-order algorithms for the resolution of turbulent and compressible flows in the context of physical and geometrical parameters. At the full-order level turbulence is modeled using an eddy viscosity approach. Since there is a variety of different turbulence models for the approximation of this supplementary viscosity, one of the aims of this work is to provide a reduced-order model which is independent on this selection. This goal is reached by the application of hybrid methods where Navier-Stokes equations are projected in a standard way while the viscosity field is approximated by the use of data-driven interpolation methods or by the evaluation of a properly trained neural network. By exploiting the aforementioned expedients it is possible to predict accurate solutions with respect to the full-order problems characterized by high Reynolds numbers and elevated Mach numbers.

physics.flu-dyn↗

arXiv2024

Modal Analysis of the Wake Shed Behind a Horizontal Axis Wind Turbine with Flexible Blades

The proper orthogonal decomposition has been applied on a full-scale horizontal-axis wind turbine to shed light on the wake characteristics behind the wind turbine. In reality, the blade tip experiences high deflections even at the rated conditions which definitely alter the wake flow field, and in the case of a wind farm, may complicate the inlet conditions of the downstream wind turbine. The turbine under consideration is the full-scale model of the National Renewable Energy Laboratory 5MW onshore wind turbine which is accompanied by several simulation complexities including turbulence, mesh motion and fluid-structure interaction. Results indicated an almost similar modal behaviour for the rigid and flexible turbines at the wake region. In addition, more flow structures in terms of local vortices and fluctuating velocity fields take place at the far wake region. The flow structures due to the wake shed from the tower tend to move towards the center and merge with that of the nacelle leading to an integral vortical structure 2.5 diameter away from the rotor. Also, it is concluded that the exclusion of the tower leads to missing a major part of the wake structures, especially at far-wake positions.

math.NA↗

arXiv2024

Optimized Bayesian Framework for Inverse Heat Transfer Problems Using Reduced Order Methods

A stochastic inverse heat transfer problem is formulated to infer the transient heat flux, treated as an unknown Neumann boundary condition. Therefore, an Ensemble-based Simultaneous Input and State Filtering as a Data Assimilation technique is utilized for simultaneous temperature distribution prediction and heat flux estimation. This approach is incorporated with Radial Basis Functions not only to lessen the size of unknown inputs but also to mitigate the computational burden of this technique. The procedure applies to the specific case of a mold used in Continuous Casting machinery, and it is based on the sequential availability of temperature provided by thermocouples inside the mold. Our research represents a significant contribution to achieving probabilistic boundary condition estimation in real-time handling with noisy measurements and errors in the model. We additionally demonstrate the procedure's dependence on some hyperparameters that are not documented in the existing literature. Accurate real-time prediction of the heat flux is imperative for the smooth operation of Continuous Casting machinery at the boundary region where the Continuous Casting mold and the molten steel meet which is not also physically measurable. Thus, this paves the way for efficient real-time monitoring and control, which is critical for preventing caster shutdowns.

math.NA↗

arXiv2024

A Predictive Surrogate Model for Heat Transfer of an Impinging Jet on a Concave Surface

This paper aims to comprehensively investigate the efficacy of various Model Order Reduction (MOR) and deep learning techniques in predicting heat transfer in a pulsed jet impinging on a concave surface. Expanding on the previous experimental and numerical research involving pulsed circular jets, this investigation extends to evaluate Predictive Surrogate Models (PSM) for heat transfer across various jet characteristics. To this end, this work introduces two predictive approaches, one employing a Fast Fourier Transformation augmented Artificial Neural Network (FFT-ANN) for predicting the average Nusselt number under constant-frequency scenarios. Moreover, the investigation introduces the Proper Orthogonal Decomposition and Long Short-Term Memory (POD-LSTM) approach for random-frequency impingement jets. The POD-LSTM method proves to be a robust solution for predicting the local heat transfer rate under random-frequency impingement scenarios, capturing both the trend and value of temporal modes. The comparison of these approaches highlights the versatility and efficacy of advanced machine learning techniques in modelling complex heat transfer phenomena.

math.NA↗

arXiv2024

Physics Informed Neural Network Framework for Unsteady Discretized Reduced Order System

This work addresses the development of a physics-informed neural network (PINN) with a loss term derived from a discretized time-dependent reduced-order system. In this work, first, the governing equations are discretized using a finite difference scheme (whereas, any other discretization technique can be adopted), then projected on a reduced or latent space using the Proper Orthogonal Decomposition (POD)-Galerkin approach and next, the residual arising from discretized reduced order equation is considered as an additional loss penalty term alongside the data-driven loss term using different variants of deep learning method such as Artificial neural network (ANN), Long Short-Term Memory based neural network (LSTM). The LSTM neural network has been proven to be very effective for time-dependent problems in a purely data-driven environment. The current work demonstrates the LSTM network's potential over ANN networks in physics-informed neural networks (PINN) as well. The potential of using discretized governing equations instead of continuous form lies in the flexibility of input to the PINN. Different sizes of data ranging from small, medium to big datasets are used to assess the potential of discretized-physics-informed neural networks when there is very sparse or no data available. The proposed methods are applied to a pitch-plunge airfoil motion governed by rigid-body dynamics and a one-dimensional viscous Burgers' equation. The current work also demonstrates the prediction capability of various discretized-physics-informed neural networks outside the domain where the data is available or governing equation-based residuals are minimized.

math.NA↗

arXiv2023

Deep Reinforcement Learning for the Heat Transfer Control of Pulsating Impinging Jets

This research study explores the applicability of Deep Reinforcement Learning (DRL) for thermal control based on Computational Fluid Dynamics. To accomplish that, the forced convection on a hot plate prone to a pulsating cooling jet with variable velocity has been investigated. We begin with evaluating the efficiency and viability of a vanilla Deep Q-Network (DQN) method for thermal control. Subsequently, a comprehensive comparison between different variants of DRL is conducted. Soft Double and Duel DQN achieved better thermal control performance among all the variants due to their efficient learning and action prioritization capabilities. Results demonstrate that the soft Double DQN outperforms the hard Double DQN. Moreover, soft Double and Duel can maintain the temperature in the desired threshold for more than 98% of the control cycle. These findings demonstrate the promising potential of DRL in effectively addressing thermal control systems.

math.NA↗

arXiv2023

A Reduced Order Model formulation for left atrium flow: an Atrial Fibrillation case

A data-driven Reduced Order Model (ROM) based on a Proper Orthogonal Decomposition - Radial Basis Function (POD-RBF) approach is adopted in this paper for the analysis of blood flow dynamics in a patient-specific case of Atrial Fibrillation (AF). The Full Order Model (FOM) is represented by incompressible Navier-Stokes equations, discretized with a Finite Volume (FV) approach. Both the Newtonian and the Casson's constitutive laws are employed. The aim is to build a computational tool able to efficiently and accurately reconstruct the patterns of relevant hemodynamics indices related to the stasis of the blood in a physical parametrization framework including the cardiac output in the Newtonian case and also the plasma viscosity and the hematocrit in the non-Newtonian one. Many FOM-ROM comparisons are shown to analyze the performance of our approach as regards errors and computational speed-up.

physics.flu-dyn↗

arXiv2023

Explicable hyper-reduced order models on nonlinearly approximated solution manifolds of compressible and incompressible Navier-Stokes equations

A slow decaying Kolmogorov n-width of the solution manifold of a parametric partial differential equation precludes the realization of efficient linear projection-based reduced-order models. This is due to the high dimensionality of the reduced space needed to approximate with sufficient accuracy the solution manifold. To solve this problem, neural networks, in the form of different architectures, have been employed to build accurate nonlinear regressions of the solution manifolds. However, the majority of the implementations are non-intrusive black-box surrogate models, and only a part of them perform dimension reduction from the number of degrees of freedom of the discretized parametric models to a latent dimension. We present a new intrusive and explicable methodology for reduced-order modelling that employs neural networks for solution manifold approximation but that does not discard the physical and numerical models underneath in the predictive/online stage. We will focus on autoencoders used to compress further the dimensionality of linear approximants of solution manifolds, achieving in the end a nonlinear dimension reduction. After having obtained an accurate nonlinear approximant, we seek for the solutions on the latent manifold with the residual-based nonlinear least-squares Petrov-Galerkin method, opportunely hyper-reduced in order to be independent from the number of degrees of freedom. New adaptive hyper-reduction strategies are developed along with the employment of local nonlinear approximants. We test our methodology on two nonlinear time-dependent parametric benchmarks involving a supersonic flow past a NACA airfoil with changing Mach number and an incompressible turbulent flow around the Ahmed body with changing slant angle.

math.NA↗

arXiv2023

Generative Models for the Deformation of Industrial Shapes with Linear Geometric Constraints: model order and parameter space reductions

Real-world applications of computational fluid dynamics often involve the evaluation of quantities of interest for several distinct geometries that define the computational domain or are embedded inside it. For example, design optimization studies require the realization of response surfaces from the parameters that determine the geometrical deformations to relevant outputs to be optimized. In this context, a crucial aspect to be addressed are the limited resources at disposal to computationally generate different geometries or to physically obtain them from direct measurements. This is the case for patient-specific biomedical applications for example. When additional linear geometrical constraints need to be imposed, the computational costs increase substantially. Such constraints include total volume conservation, barycenter location and fixed moments of inertia. We develop a new paradigm that employs generative models from machine learning to efficiently sample new geometries with linear constraints. A consequence of our approach is the reduction of the parameter space from the original geometrical parametrization to a low-dimensional latent space of the generative models. Crucial is the assessment of the quality of the distribution of the constrained geometries obtained with respect to physical and geometrical quantities of interest. Non-intrusive model order reduction is enhanced since smaller parametric spaces are considered. We test our methodology on two academic test cases: a mixed Poisson problem on the 3d Stanford bunny with fixed barycenter deformations and the multiphase turbulent incompressible Navier-Stokes equations for the Duisburg test case with fixed volume deformations of the naval hull.

math.NA↗

arXiv2023

A physics-based reduced order model for urban air pollution prediction

This article presents an innovative approach for developing an efficient reduced-order model to study the dispersion of urban air pollutants. The need for real-time air quality monitoring has become increasingly important, given the rise in pollutant emissions due to urbanization and its adverse effects on human health. The proposed methodology involves solving the linear advection-diffusion problem, where the solution of the Reynolds-averaged Navier-Stokes equations gives the convective field. At the same time, the source term consists of an empirical time series. However, the computational requirements of this approach, including microscale spatial resolution, repeated evaluation, and low time scale, necessitate the use of high-performance computing facilities, which can be a bottleneck for real-time monitoring. To address this challenge, a problem-specific methodology was developed that leverages a data-driven approach based on Proper Orthogonal Decomposition with regression (POD-R) coupled with Galerkin projection (POD-G) endorsed with the discrete empirical interpolation method (DEIM). The proposed method employs a feedforward neural network to non-intrusively retrieve the reduced-order convective operator required for online evaluation. The numerical framework was validated on synthetic emissions and real wind measurements. The results demonstrate that the proposed approach significantly reduces the computational burden of the traditional approach and is suitable for real-time air quality monitoring. Overall, the study advances the field of reduced order modeling and highlights the potential of data-driven approaches in environmental modeling and large-scale simulations.

math.NA↗

arXiv2023

A Continuous Convolutional Trainable Filter for Modelling Unstructured Data

Convolutional Neural Network (CNN) is one of the most important architectures in deep learning. The fundamental building block of a CNN is a trainable filter, represented as a discrete grid, used to perform convolution on discrete input data. In this work, we propose a continuous version of a trainable convolutional filter able to work also with unstructured data. This new framework allows exploring CNNs beyond discrete domains, enlarging the usage of this important learning technique for many more complex problems. Our experiments show that the continuous filter can achieve a level of accuracy comparable to the state-of-the-art discrete filter, and that it can be used in current deep learning architectures as a building block to solve problems with unstructured domains as well.

cs.LG↗

arXiv2023

Applicable Methodologies for the Mass Transfer Phenomenon in Tumble Dryers: A Review

Tumble dryers offer a fast and convenient way of drying textiles independent of weather conditions and therefore are frequently used in ordinary households. However, artificial drying of textiles consumes considerable amounts of energy, approximately 8.2 percent of the residential electricity consumption is for drying of textiles in northern European countries (Cranston et al., 2019). Several authors have investigated the aspects of the clothes drying cycle with experimental and numerical methods to understand and improve the process. The first turning point study on understanding the physics of evaporation for tumble dryers was presented by Lambert et al. (1991) in the early 90s. With the aid of Chilton_Colburn analogy, they introduced the concept of area-mass transfer coefficient to address evaporation rate. Afterwards, several experimental or numerical studies were published based on this concept, and furthermore, the model was then developed into 0-dimensional (Deans, 2001) and 1-dimensional (Wei et al., 2017) to gain more accuracy. The evaporation rate is considered to be the main system parameter for dryers with which other performance parameters including drying time, effectiveness, moisture content and efficiency can be estimated. More recent literature focused on utilizing dimensional analysis or image processing techniques to correlate drying indices with system parameters. However, the validity of these regressed models is machine-specific, and hence, cannot be generalized yet. All the previous models for estimating the evaporation rate in tumble dryers are discussed. The review of the related literature showed that all of the previous models for the prediction of the evaporation rate in the clothes dryers have some limitations in terms of accuracy and applicability.

math.NA↗

arXiv2023

Reduced Basis, Embedded Methods and Parametrized Levelset Geometry

In this chapter we examine reduced order techniques for geometrical parametrized heat exchange systems, Poisson, and flows based on Stokes, steady and unsteady incompressible Navier-Stokes and Cahn-Hilliard problems. The full order finite element methods, employed in an embedded and/or immersed geometry framework, are the Shifted Boundary (SBM) and the Cut elements (CutFEM) methodologies, with applications mainly focused in fluids. We start by introducing the Nitsche's method, for both SBM/CutFEM and parametrized physical problems as well as the high fidelity approximation. We continue with the full order parameterized Nitsche shifted boundary variational weak formulation, and the reduced order modeling ideas based on a Proper Orthogonal Decomposition Galerkin method and geometrical parametrization, quoting the main differences and advantages with respect to a reference domain approach used for classical finite element methods, while stability issues may overcome employing supremizer enrichment methodologies. Numerical experiments verify the efficiency of the introduced ``hello world'' problems considering reduced order results in several cases for one, two, three and four dimensional geometrical kind of parametrization. We investigate execution times, and we illustrate transport methods and improvements. A list of important references related to unfitted methods and reduced order modeling are [11, 8, 9, 10, 7, 6, 12].

math.NA↗

arXiv2023

A two stages Deep Learning Architecture for Model Reduction of Parametric Time-Dependent Problems

Parametric time-dependent systems are of a crucial importance in modeling real phenomena, often characterized by non-linear behaviors too. Those solutions are typically difficult to generalize in a sufficiently wide parameter space while counting on limited computational resources available. As such, we present a general two-stages deep learning framework able to perform that generalization with low computational effort in time. It consists in a separated training of two pipe-lined predictive models. At first, a certain number of independent neural networks are trained with data-sets taken from different subsets of the parameter space. Successively, a second predictive model is specialized to properly combine the first-stage guesses and compute the right predictions. Promising results are obtained applying the framework to incompressible Navier-Stokes equations in a cavity (Rayleigh-Bernard cavity), obtaining a 97% reduction in the computational time comparing with its numerical resolution for a new value of the Grashof number.

math.NA↗

arXiv2022

Assessment of URANS and LES Methods in Predicting Wake Shed Behind a Vertical Axis Wind Turbine

In order to shed light on the Vertical-Axis Wind Turbines (VAWT) wake characteristics, in this paper we present high-fidelity CFD simulations of the flow around an exemplary H-shaped VAWT turbine, and we propose to apply Proper Orthogonal Decomposition (POD) to the computed flow field in the near wake of the rotor. The turbine under consideration was widely studied in previous experimental and computational investigations. In the first part of the study, multiple Reynolds-Averaged Navier-Stokes (RANS) simulations were performed at the Tip Speed Ratio (TSR) of peak power coefficient, to select the most accurate turbulence model with respect to available data. In the following step, further RANS numerical simulations were performed at different TSRs to compare the power coefficient against experimental data. Then, Large Eddy Simulation (LES) was applied for multiple TSR conditions. The spatial and temporal POD modes along with modal energy for the RANS and LES results were extracted, and the performance of the turbulence models was assessed. Also, an interpretation of the POD modes with respect to the flow structures was given to highlight the most significant time and length scales of the predictions considering the different dynamical levels of approximations of the computational models.

math.NA↗