arXiv subjects

Giovanni Stabile

Publications and source records attributed to Giovanni Stabile.

At least 55 records · Page 3Linked to original sources

arXiv2022

Hybrid Data-Driven Closure Strategies for Reduced Order Modeling

In this paper, we propose hybrid data-driven ROM closures for fluid flows. These new ROM closures combine two fundamentally different strategies: (i) purely data-driven ROM closures, both for the velocity and the pressure; and (ii) physically based, eddy viscosity data-driven closures, which model the energy transfer in the system. The first strategy consists in the addition of closure/correction terms to the governing equations, which are built from the available data. The second strategy includes turbulence modeling by adding eddy viscosity terms, which are determined by using machine learning techniques. The two strategies are combined for the first time in this paper to investigate a two-dimensional flow past a circular cylinder at Re=50000. Our numerical results show that the hybrid data-driven ROM is more accurate than both the purely data-driven ROM and the eddy viscosity ROM.

math.NA↗

arXiv2022

Pressure Data-Driven Variational Multiscale Reduced Order Models

In this paper, we develop data-driven closure/correction terms to increase the pressure and velocity accuracy of reduced order models (ROMs) for fluid flows. Specifically, we propose the first pressure-based data-driven variational multiscale ROM, in which we use the available data to construct closure/correction terms for both the momentum equation and the continuity equation. Our numerical investigation of the two-dimensional flow past a circular cylinder at Re=50000 in the marginally-resolved regime shows that the novel pressure data-driven variational multiscale ROM yields significantly more accurate velocity and pressure approximations than the standard ROM and, more importantly, than the original data-driven variational multiscale ROM (i.e., without pressure components). In particular, our numerical results show that adding the closure/correction term in the momentum equation significantly improves both the velocity and the pressure approximations, whereas adding the closure/correction term in the continuity equation improves only the pressure approximation.

math.NA↗

arXiv2022

Novel Methodologies for Solving the Inverse Unsteady Heat Transfer Problem of Estimating the Boundary Heat Flux in Continuous Casting Molds

In this work, we investigate the estimation of the transient mold-slab heat flux in continuous casting molds given some thermocouples measurements in the mold plates. Mathematically, we can see this problem as the estimation of a Neumann boundary condition given pointwise state observations in the interior of the domain. We formulate it in a deterministic inverse problem setting. After introducing the industrial problem, we present the mold thermal model and related assumptions. Then, we formulate the boundary heat flux estimation problem in a deterministic inverse problem setting using a sequential approach according to the sequentiality of the temperature measurements. We consider different formulations of the inverse problem. For each one, we develop novel direct methodologies exploiting a space parameterization of the heat flux and the linearity of the mold model. We construct these methods to be divided into a computationally expensive offline phase that can be computed before the process starts, and a cheaper online phase to be performed during the casting process. To conclude, we test the performance of the proposed methods in two benchmark cases.

math.NA↗

arXiv2022

Non-linear manifold ROM with Convolutional Autoencoders and Reduced Over-Collocation method

Non-affine parametric dependencies, nonlinearities and advection-dominated regimes of the model of interest can result in a slow Kolmogorov n-width decay, which precludes the realization of efficient reduced-order models based on linear subspace approximations. Among the possible solutions, there are purely data-driven methods that leverage autoencoders and their variants to learn a latent representation of the dynamical system, and then evolve it in time with another architecture. Despite their success in many applications where standard linear techniques fail, more has to be done to increase the interpretability of the results, especially outside the training range and not in regimes characterized by an abundance of data. Not to mention that none of the knowledge on the physics of the model is exploited during the predictive phase. In order to overcome these weaknesses, we implement the non-linear manifold method introduced by Carlberg et al [37] with hyper-reduction achieved through reduced over-collocation and teacher-student training of a reduced decoder. We test the methodology on a 2d non-linear conservation law and a 2d shallow water models, and compare the results obtained with a purely data-driven method for which the dynamics is evolved in time with a long-short term memory network.

math.NA↗

arXiv2022

Embedded domain Reduced Basis Models for the shallow water hyperbolic equations with the Shifted Boundary Method

We consider fully discrete embedded finite element approximations for a shallow water hyperbolic problem and its reduced-order model. Our approach is based on a fixed background mesh and an embedded reduced basis. The Shifted Boundary Method for spatial discretization is combined with an explicit predictor/multi-corrector time integration to integrate in time the numerical solutions to the shallow water equations, both for the full and reduced-order model. In order to improve the approximation of the solution manifold also for geometries that are untested during the offline stage, the snapshots have been pre-processed by means of an interpolation procedure that precedes the reduced basis computation. The methodology is tested on geometrically parametrized shapes with varying size and position.

math.NA↗

arXiv2021

An efficient FV-based Virtual Boundary Method for the simulation of fluid-solid interaction

In this work, the Immersed Boundary Method (IBM) with feedback forcing introduced by Goldstein et al. (1993) and often referred in the literature as the Virtual Boundary Method (VBM), is addressed. The VBM has been extensively applied both within a Spectral and a Finite Difference (FD) framework. Here, we propose to combine the VBM with a computationally efficient Finite Volume (FV) method. We will show that for similar computational configurations, FV and FD methods provide significantly different results. Furthermore, we propose to modify the standard feedback forcing scheme, based on a Proportional-Integral (PI) controller, with the introduction of a derivative action, in order to obtain a Proportial-Integral-Derivative (PID) controller. The stability analysis for the Backward Differentiation Formula of order 1 (BDF1) time scheme is modified accordingly, and extended to the Backward Differentiation Formula of order 2 (BDF2) time scheme. We will show that, for the BDF2 time scheme, the derivative action allows to improve the stability characteristics of the system. Our approach is validated against numerical data available in the literature for a stationary/rigidly moving 2D circular cylinder in several configurations. Finally, a Fluid-Structure Interaction (FSI) benchmark, related to the frequency response of a cantilever beam coupled with a fluid, is presented: we numerically demonstrate that the introduction of the derivative action plays an important role in order to properly detect the fluid-structure interaction coupling.

math.NA↗

arXiv2021

The Neural Network shifted-Proper Orthogonal Decomposition: a Machine Learning Approach for Non-linear Reduction of Hyperbolic Equations

Models with dominant advection always posed a difficult challenge for projection-based reduced order modelling. Many methodologies that have recently been proposed are based on the pre-processing of the full-order solutions to accelerate the Kolmogorov N-width decay thereby obtaining smaller linear subspaces with improved accuracy. These methods however must rely on the knowledge of the characteristic speeds in phase space of the solution, limiting their range of applicability to problems with explicit functional form for the advection field. In this work we approach the problem of automatically detecting the correct pre-processing transformation in a statistical learning framework by implementing a deep-learning architecture. The purely data-driven method allowed us to generalise the existing approaches of linear subspace manipulation to non-linear hyperbolic problems with unknown advection fields. The proposed algorithm has been validated against simple test cases to benchmark its performances and later successfully applied to a multiphase simulation.

math.NA↗

arXiv2021

Hybrid neural network reduced order modelling for turbulent flows with geometric parameters

Geometrically parametrized Partial Differential Equations are nowadays widely used in many different fields as, for example, shape optimization processes or patient specific surgery studies. The focus of this work is on some advances for this topic, capable of increasing the accuracy with respect to previous approaches while relying on a high cost-benefit ratio performance. The main scope of this paper is the introduction of a new technique mixing up a classical Galerkin-projection approach together with a data-driven method to obtain a versatile and accurate algorithm for the resolution of geometrically parametrized incompressible turbulent Navier-Stokes problems. The effectiveness of this procedure is demonstrated on two different test cases: a classical academic back step problem and a shape deformation Ahmed body application. The results show into details the properties of the architecture we developed while exposing possible future perspectives for this work.

physics.flu-dyn↗

arXiv2021

A novel iterative penalty method to enforce boundary conditions in Finite Volume POD-Galerkin reduced order models for fluid dynamics problems

A Finite-Volume based POD-Galerkin reduced order model is developed for fluid dynamics problems where the (time-dependent) boundary conditions are controlled using two different boundary control strategies: the lifting function method, whose aim is to obtain homogeneous basis functions for the reduced basis space and the penalty method where the boundary conditions are enforced in the reduced order model using a penalty factor. The penalty method is improved by using an iterative solver for the determination of the penalty factor rather than tuning the factor with a sensitivity analysis or numerical experimentation. The boundary control methods are compared and tested for two cases: the classical lid driven cavity benchmark problem and a Y-junction flow case with two inlet channels and one outlet channel. The results show that the boundaries of the reduced order model can be controlled with the boundary control methods and the same order of accuracy is achieved for the velocity and pressure fields. Finally, the reduced order models are 270-308 times faster than the full order models for the lid driven cavity test case and 13-24 times for the Y-junction test case.

math.NA↗

arXiv2021

Reduced order models for the incompressible Navier-Stokes equations on collocated grids using a 'discretize-then-project' approach

A novel reduced order model (ROM) for incompressible flows is developed by performing a Galerkin projection based on a fully (space and time) discrete full order model (FOM) formulation. This 'discretize-then-project' approach requires no pressure stabilization technique (even though the pressure term is present in the ROM) nor a boundary control technique (to impose the boundary conditions at the ROM level). These are two main advantages compared to existing approaches. The fully discrete FOM is obtained by a finite volume discretization of the incompressible Navier-Stokes equations on a collocated grid, with a forward Euler time discretization. Two variants of the time discretization method, the inconsistent and consistent flux method, have been investigated. The latter leads to divergence-free velocity fields, also on the ROM level, whereas the velocity fields are only approximately divergence-free in the former method. For both methods, accurate results have been obtained for test cases with different types of boundary conditions: a lid-driven cavity and an open-cavity (with an inlet and outlet). The ROM obtained with the consistent flux method, having divergence-free velocity fields, is slightly more accurate but also slightly more expensive to solve compared to the inconsistent flux method. The speedup ratio of the ROM and FOM computation times is the highest for the open cavity test case with the inconsistent flux method.

physics.flu-dyn↗

arXiv2021

A numerical approach for heat flux estimation in thin slabs continuous casting molds using data assimilation

In the present work, we consider the industrial problem of estimating in real-time the mold-steel heat flux in continuous casting mold. We approach this problem by first considering the mold modeling problem (direct problem). Then, we plant the heat flux estimation problem as the inverse problem of estimating a Neumann boundary condition having as data pointwise temperature measurements in the interior of the mold domain. We also consider the case of having a total heat flux measurement together with the temperature measurements. We develop two methodologies for solving this inverse problem. The first one is the traditional Alifanov's regularization, the second one exploits the parameterization of the heat flux. We develop the latter method to have an offline-online decomposition with a computationally efficient online part to be performed in real-time. In the last part of this work, we test these methods on academic and industrial benchmarks. The results show that the parameterization method outclasses Alifanov's regularization both in performance and computational cost. Moreover, it proves to be robust with respect to the measurements noise. Finally, the tests confirm that the computational cost is suitable for real-time estimation of the heat flux.

math.NA↗

arXiv2020

On the comparison of LES data-driven reduced order approaches for hydroacoustic analysis

In this work, Dynamic Mode Decomposition (DMD) and Proper Orthogonal Decomposition (POD) methodologies are applied to hydroacoustic dataset computed using Large Eddy Simulation (LES) coupled with Ffowcs Williams and Hawkings (FWH) analogy. First, a low-dimensional description of the flow fields is presented with modal decomposition analysis. Sensitivity towards the DMD and POD bases truncation rank is discussed, and extensive dataset is provided to demonstrate the ability of both algorithms to reconstruct the flow fields with all the spatial and temporal frequencies necessary to support accurate noise evaluation. Results show that while DMD is capable to capture finer coherent structures in the wake region for the same amount of employed modes, reconstructed flow fields using POD exhibit smaller magnitudes of global spatiotemporal errors compared with DMD counterparts. Second, a separate set of DMD and POD modes generated using half the snapshots is employed into two data-driven reduced models respectively, based on DMD mid cast and POD with Interpolation (PODI). In that regard, results confirm that the predictive character of both reduced approaches on the flow fields is sufficiently accurate, with a relative superiority of PODI results over DMD ones. This infers that, discrepancies induced due to interpolation errors in PODI is relatively low compared with errors induced by integration and linear regression operations in DMD, for the present setup. Finally, a post processing analysis on the evaluation of FWH acoustic signals utilizing reduced fluid dynamic fields as input demonstrates that both DMD and PODI data-driven reduced models are efficient and sufficiently accurate in predicting acoustic noises.

math.NA↗

arXiv2020

Enhancing CFD predictions in shape design problems by model and parameter space reduction

In this work we present an advanced computational pipeline for the approximation and prediction of the lift coefficient of a parametrized airfoil profile. The non-intrusive reduced order method is based on dynamic mode decomposition (DMD) and it is coupled with dynamic active subspaces (DyAS) to enhance the future state prediction of the target function and reduce the parameter space dimensionality. The pipeline is based on high-fidelity simulations carried out by the application of finite volume method for turbulent flows, and automatic mesh morphing through radial basis functions interpolation technique. The proposed pipeline is able to save 1/3 of the overall computational resources thanks to the application of DMD. Moreover exploiting DyAS and performing the regression on a lower dimensional space results in the reduction of the relative error in the approximation of the time-varying lift coefficient by a factor 2 with respect to using only the DMD.

math.NA↗

arXiv2020

A POD-Galerkin reduced order model of a turbulent convective buoyant flow of sodium over a backward-facing step

A Finite-Volume based POD-Galerkin reduced order modeling strategy for steady-state Reynolds averaged Navier--Stokes (RANS) simulation is extended for low-Prandtl number flow. The reduced order model is based on a full order model for which the effects of buoyancy on the flow and heat transfer are characterized by varying the Richardson number. The Reynolds stresses are computed with a linear eddy viscosity model. A single gradient diffusion hypothesis, together with a local correlation for the evaluation of the turbulent Prandtl number, is used to model the turbulent heat fluxes. The contribution of the eddy viscosity and turbulent thermal diffusivity fields are considered in the reduced order model with an interpolation based data-driven method. The reduced order model is tested for buoyancy-aided turbulent liquid sodium flow over a vertical backward-facing step with a uniform heat flux applied on the wall downstream of the step. The wall heat flux is incorporated with a Neumann boundary condition in both the full order model and the reduced order model. The velocity and temperature profiles predicted with the reduced order model for the same and new Richardson numbers inside the range of parameter values are in good agreement with the RANS simulations. Also, the local Stanton number and skin friction distribution at the heated wall are qualitatively well captured. Finally, the reduced order simulations, performed on a single core, are about $10^5$ times faster than the RANS simulations that are performed on eight cores.

physics.flu-dyn↗

arXiv2020

A Reduced-Order Shifted Boundary Method for Parametrized incompressible Navier-Stokes equations

We investigate a projection-based reduced-order model of the steady incompressible Navier-Stokes equations for moderate Reynolds numbers. In particular, we construct an "embedded" reduced basis space, by applying proper orthogonal decomposition to the Shifted Boundary Method, a high-fidelity embedded method recently developed. We focus on the geometrical parametrization through level-set geometries, using a fixed Cartesian background geometry and the associated mesh. This approach avoids both remeshing and the development of a reference domain formulation, as typically done in fitted mesh finite element formulations. Two-dimensional computational examples for one and three-parameter dimensions are presented to validate the convergence and the efficacy of the proposed approach.

math.NA↗

arXiv2020

Efficient Geometrical parametrization for Finite-Volume based Reduced Order Methods

In this work, we present an approach for the efficient treatment of parametrized geometries in the context of POD-Galerkin reduced order methods based on Finite Volume full order approximations. On the contrary to what is normally done in the framework of finite element reduced order methods, different geometries are not mapped to a common reference domain: the method relies on basis functions defined on an average deformed configuration and makes use of the Discrete Empirical Interpolation Method (D-EIM) to handle together non-affinity of the parametrization and non-linearities. In the first numerical example, different mesh motion strategies, based on a Laplacian smoothing technique and on a Radial Basis Function approach, are analyzed and compared on a heat transfer problem. Particular attention is devoted to the role of the non-orthogonal correction. In the second numerical example the methodology is tested on a geometrically parametrized incompressible Navier--Stokes problem. In this case, the reduced order model is constructed following the same segregated approach used at the full order level

math.NA↗

arXiv2020

Data-Driven POD-Galerkin Reduced Order Model for Turbulent Flows

In this work we present a Reduced Order Model which is specifically designed to deal with turbulent flows in a finite volume setting. The method used to build the reduced order model is based on the idea of merging/combining projection-based techniques with data-driven reduction strategies. In particular, the work presents a mixed strategy that exploits a data-driven reduction method to approximate the eddy viscosity solution manifold and a classical POD-Galerkin projection approach for the velocity and the pressure fields, respectively. The newly proposed reduced order model has been validated on benchmark test cases in both steady and unsteady settings with Reynolds up to Re=O(10^5).

math.NA↗

arXiv2019

A Hybrid Reduced Order Method for Modelling Turbulent Heat Transfer Problems

A parametric, hybrid reduced order model approach based on the Proper Orthogonal Decomposition with both Galerkin projection and interpolation based on Radial Basis Functions method is presented. This method is tested against a case of turbulent non-isothermal mixing in a T-junction pipe, a common ow arrangement found in nuclear reactor cooling systems. The reduced order model is derived from the 3D unsteady, incompressible Navier-Stokes equations weakly coupled with the energy equation. For high Reynolds numbers, the eddy viscosity and eddy diffusivity are incorporated into the reduced order model with a Proper Orthogonal Decomposition (nested and standard) with Interpolation (PODI), where the interpolation is performed using Radial Basis Functions. The reduced order solver, obtained using a k-ω SST URANS full order model, is tested against the full order solver in a 3D T-junction pipe with parametric velocity inlet boundary conditions.

math.NA↗