arXiv subjects

Gregory B. Rieker

Publications and source records attributed to Gregory B. Rieker.

24 records · Page 2Linked to original sources

arXiv2019

The Need for Laboratory Measurements and Ab Initio Studies to Aid Understanding of Exoplanetary Atmospheres

We are now on a clear trajectory for improvements in exoplanet observations that will revolutionize our ability to characterize their atmospheric structure, composition, and circulation, from gas giants to rocky planets. However, exoplanet atmospheric models capable of interpreting the upcoming observations are often limited by insufficiencies in the laboratory and theoretical data that serve as critical inputs to atmospheric physical and chemical tools. Here we provide an up-to-date and condensed description of areas where laboratory and/or ab initio investigations could fill critical gaps in our ability to model exoplanet atmospheric opacities, clouds, and chemistry, building off a larger 2016 white paper, and endorsed by the NAS Exoplanet Science Strategy report. Now is the ideal time for progress in these areas, but this progress requires better access to, understanding of, and training in the production of spectroscopic data as well as a better insight into chemical reaction kinetics both thermal and radiation-induced at a broad range of temperatures. Given that most published efforts have emphasized relatively Earth-like conditions, we can expect significant and enlightening discoveries as emphasis moves to the exotic atmospheres of exoplanets.

astro-ph.EP↗

arXiv2019

Scaling of the Puffing Strouhal Number for Buoyant Jets

Prior research has shown that round and planar buoyant jets "puff" at a frequency that depends on the balance of momentum and buoyancy fluxes at the inlet, as parametrized by the Richardson number. Experiments have revealed the existence of scaling relations between the Strouhal number of the puffing and the inlet Richardson number, but geometry-specific relations are required when the characteristic length is taken to be the diameter (for round inlets) or width (for planar inlets). In the present study, we show that when the hydraulic radius of the inlet is instead used as the characteristic length, a single Strouhal-Richardson scaling relation is obtained for a variety of inlet geometries. In particular, we use adaptive mesh numerical simulations to measure puffing Strouhal numbers for circular, rectangular (with three different aspect ratios), triangular, and annular high-temperature buoyant jets over a range of Richardson numbers. We then combine these results with prior experimental data for round and planar buoyant jets to propose a new scaling relation that accurately describes puffing Strouhal numbers for various inlet shapes and for Richardson numbers spanning over four orders of magnitude.

physics.flu-dyn↗

arXiv2019

High-Resolution Numerical Simulations of a Large-Scale Helium Plume Using Adaptive Mesh Refinement

The physical characteristics and evolution of a large-scale helium plume are examined through a series of numerical simulations with increasing physical resolution using adaptive mesh refinement (AMR). The five simulations each model a 1~m diameter circular helium plume exiting into a (4~m)$^3$ domain, and differ solely with respect to the smallest scales resolved using the AMR, spanning resolutions from 15.6~mm down to 0.976~mm. As the physical resolution becomes finer, the helium-air shear layer and subsequent Kelvin-Helmholtz instability are better resolved, leading to a shift in the observed plume structure and dynamics. In particular, a critical resolution is found between 3.91~mm and 1.95~mm, below which the mean statistics and frequency content of the plume are altered by the development of a Rayleigh-Taylor instability near the centerline in close proximity to the base of the plume. This shift corresponds to a plume "puffing" frequency that is slightly higher than would be predicted using empirical relationships developed for buoyant jets. Ultimately, the high-fidelity simulations performed here are intended as a new validation dataset for the development of subgrid-scale models used in large eddy simulations of real-world buoyancy-driven flows.

physics.flu-dyn↗

arXiv2018

Broadband Dual Frequency Comb Spectroscopy in a Rapid Compression Machine

We demonstrate fiber mode-locked dual frequency comb spectroscopy for broadband, high resolution measurements in a rapid compression machine (RCM). We apply an apodization technique to improve the short-term signal-to-noise-ratio (SNR), which enables broadband spectroscopy at combustion-relevant timescales. We measure the absorption on 24345 individual wavelength elements (comb teeth) between 5967 and 6133 cm-1 at 704 microsecond time resolution during a 12-ms compression of a CH4-N2 mixture. We discuss the effect of the apodization technique on the absorption spectra, and apply an identical effect to the spectral model during fitting to recover the mixture temperature. The fitted temperature is compared against an adiabatic model, and found to be in good agreement with expected trends. This work demonstrates the potential of DCS to be used as an in situ diagnostic tool for broadband, high resolution, measurements in engine-like environments.

physics.app-ph↗

arXiv2017

Continuous regional trace gas source attribution using a field-deployed dual frequency comb spectrometer

Identification and quantification of trace gas sources is a major challenge for understanding and regulating air quality and greenhouse gas emissions. Current approaches either provide continuous but localized monitoring, or quasi-instantaneous 'snapshot-in-time' regional monitoring. There is a need for emissions detection that provides both continuous and regional coverage, because sources and sinks can be episodic and spatially variable. We field deploy a dual frequency comb laser spectrometer for the first time, enabling an observing system that provides continuous detection of trace gas sources over multiple-square-kilometer regions. Field tests simulating methane emissions from oil and gas production demonstrate detection and quantification of a 1.6 g min^-1 source (approximate emissions from a small pneumatic valve) from a distance of 1 km, and the ability to discern two leaks among a field of many potential sources. The technology achieves the goal of detecting, quantifying, and attributing emissions sources continuously through time, over large areas, and at emissions rates ~1000x lower than current regional approaches. It therefore provides a useful tool for monitoring and mitigating undesirable sources and closes a major information gap in the atmospheric sciences.

physics.ao-ph↗

arXiv2014

Frequency Comb-Based Remote Sensing of Greenhouse Gases over Kilometer Air Paths

We demonstrate coherent dual frequency-comb spectroscopy for detecting variations in greenhouse gases. High signal-to-noise spectra are acquired spanning 5990 to 6260 cm^-1 (1600 to 1670 nm) covering ~700 absorption features from CO2, CH4, H2O, HDO, and 13CO2, across a 2-km open-air path. The transmission of each frequency comb tooth is resolved, leading to spectra with <1 kHz frequency accuracy, no instrument lineshape, and a 0.0033-cm^-1 point spacing. The fitted path-averaged concentrations and temperature yield dry-air mole fractions. These are compared with a point sensor under well-mixed conditions to evaluate current absorption models for real atmospheres. In heterogeneous conditions, time-resolved data demonstrate tracking of strong variations in mole fractions. A precision of <1 ppm for CO2 and <3 ppb for CH4 is achieved in 5 minutes in this initial demonstration. Future portable systems could support regional emissions monitoring and validation of the spectral databases critical to global satellite-based trace gas monitoring.

physics.optics↗