arXiv subjects

Guus Rijnders

Publications and source records attributed to Guus Rijnders.

At least 19 recordsLinked to original sources

arXiv2025

Ultrathin oxide freestanding membranes with large-scale continuity and structural perfection

Freestanding oxide membranes offer integration with advanced semiconductor platforms, unlocking opportunities for flexible electronics, silicon-based spintronics, neuromorphic computing, and high-performance energy technologies. Scalable fabrication of such membranes is essential for bridging fundamental discoveries in complex oxides with practical device deployment. However, the lateral dimensions of crack- and wrinkle-free membranes remain limited to millimeter scales, forming a critical bottleneck for large-area architectures. Overcoming this challenge demands strategies that preserve crystalline quality while suppressing defect transfer during release. Here, we demonstrate an approach based on a water-soluble sacrificial layer of super-tetragonal Sr4Al2O7, enabling the fabrication of ultrathin, crack-free, and wrinkle-free free-standing oxide membranes spanning centimeter-scale areas. This method is broadly applicable to a wide range of oxides and establishes a new pathway toward large-scale silicon integration and flexible oxide technologies. Nevertheless, dissolution of the sacrificial layer introduces oxygen vacancies into the SrRuO3 membranes, with diffusion depths reaching six unit cells, leading to anomalous "up-and-down" transport behavior. Although post-annealing can eliminate these vacancies, the required temperatures are incompatible with CMOS processes. Therefore, ultrathin freestanding membranes fabricated by water-assisted lift-off still face critical challenges for integration into miniaturized silicon-based oxide devices.

cond-mat.mtrl-sci↗

arXiv2023

Beyond domain alignment: Revealing the effect of intrinsic magnetic order on electrochemical water splitting

To reach a long term viable green hydrogen economy, rational design of active oxygen evolution reaction (OER) catalysts is critical. An important hurdle in this reaction originates from the fact that the reactants are singlet molecules, whereas the oxygen molecule has a triplet ground state with parallel spin alignment, implying that magnetic order in the catalyst is essential. Accordingly, multiple experimentalists reported a positive effect of external magnetic fields on OER activity of ferromagnetic catalysts. However, it remains a challenge to investigate the influence of the intrinsic magnetic order on catalytic activity. Here, we tuned the intrinsic magnetic order of epitaxial La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ thin film model catalysts from ferro- to paramagnetic by changing the temperature in-situ during water electrolysis. Using this strategy, we show that ferromagnetic ordering below the Curie temperature enhances OER activity. Moreover, we show a slight current density enhancement upon application of an external magnetic field and find that the dependence of magnetic field direction correlates with the magnetic anisotropy in the catalyst film. Our work thus suggests that both the intrinsic magnetic order in La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ films and magnetic domain alignment increase their catalytic activity. We observe no long-range magnetic order at the catalytic surface, implying that the OER enhancement is connected to the magnetic order of the bulk catalyst. Combining the effects found with existing literature, we propose a unifying picture for the spin-polarized enhancement in magnetic oxide catalysts.

cond-mat.mtrl-sci↗

arXiv2022

High-strain-induced local modification of the electronic properties of VO$_2$ thin films

Vanadium dioxide (VO2) is a popular candidate for electronic and optical switching applications due to its well-known semiconductor-metal transition. Its study is notoriously challenging due to the interplay of long and short range elastic distortions, as well as the symmetry change, and the electronic structure changes. The inherent coupling of lattice and electronic degrees of freedom opens the avenue towards mechanical actuation of single domains. In this work, we show that we can manipulate and monitor the reversible semiconductor-to-metal transition of VO2 while applying a controlled amount of mechanical pressure by a nanosized metallic probe using an atomic force microscope. At a critical pressure, we can reversibly actuate the phase transition with a large modulation of the conductivity. Direct tunneling through the VO2-metal contact is observed as the main charge carrier injection mechanism before and after the phase transition of VO2. The tunneling barrier is formed by a very thin but persistently insulating surfacelayer of the VO2. The necessary pressure to induce the transition decreases with temperature. In addition, we measured the phase coexistence line in a hitherto unexplored regime. Our study provides valuable information on pressure-induced electronic modifications of the VO2 properties, as well as on nanoscale metal-oxide contacts, which can help in the future design of oxide electronics.

cond-mat.mtrl-sci↗

arXiv2020

Single-source, solvent-free, room temperature deposition of black $γ$-CsSnI$_3$ films

The presence of a non-optically active polymorph (yellow-phase) competing with the optically active polymorph (black $γ$-phase) at room temperature in CsSnI3 and the susceptibility of Sn to oxidation, represent two of the biggest obstacles for the exploitation of CsSnI3 in optoelectronic devices. Here room-temperature single-source in vacuum deposition of smooth black $γ$ - CsSnI3 thin films is reported. This has been done by fabricating a solid target by completely solvent-free mixing of CsI and SnI2 powders and isostatic pressing. By controlled laser ablation of the solid target on an arbitrary substrate at room temperature, the formation of CsSnI3 thin films with optimal optical properties is demonstrated. The films present a band gap of 1.32 eV, a sharp absorption edge and near-infrared photoluminescence emission. These properties and X-ray diffraction of the thin films confirmed the formation of the orthorhombic (B-$γ$) perovskite phase. The thermal stability of the phase was ensured by applying in situ an Al2O$_3$ capping layer. This work demonstrates the potential of pulsed laser deposition as a volatility-insensitive single-source growth technique of halide perovskites and represents a critical step forward in the development and future scalability of inorganic lead-free halide perovskites.

physics.app-ph↗

arXiv2020

Atomic Layer Deposition of SiO$_2$-GeO$_2$ multilayers

Despite its interest for CMOS applications, Atomic Layer Deposition (ALD) of GeO$_{2}$ thin films, by itself or in combination with SiO$_{2}$, has not been widely investigated yet. Here we report the ALD growth of SiO$_{2}$/GeO$_{2}$ multilayers on Silicon substrates using a so far unreported Ge precursor. The characterization of multilayers with various periodicities reveals successful layer-by-layer growth with electron density contrast and absence of chemical intermixing, down to a periodicity of 2 atomic layers.

cond-mat.mtrl-sci↗

arXiv2019

Stabilization of phase-pure rhombohedral HfZrO4 in Pulsed Laser Deposited thin films

Controlling the crystalline structure of Hafnium Zirconate and its epitaxial relationship to a semiconducting electrode has a high technological interest, as ferroelectric materials are key ingredients for emerging electronic devices. Using Pulsed Laser Deposition, a phase pure, ultra-thin film of HfZrO4 is grown epitaxially on a GaN (0001) / Si (111) template. Since standard microscopy techniques do not allow to determine with certitude the crystalline structure of the film due to the weak scattering of oxygen, differentiated differential phase contrast (DPC) Scanning Transmission Electron Microscopy is used to allow the direct imaging of oxygen columns in the film. Combined with X-Rays diffraction analysis, the polar nature and rhombohedral R3 symmetry of the film are demonstrated.

cond-mat.mtrl-sci↗

arXiv2019

Full control of Co valence in isopolar LaCoO3 / LaTiO3 perovskite heterostructures via interfacial engineering

We report charge-transfer up to a single electron per interfacial unit cell across non-polar heterointerfaces from the Mott insulator LaTiO3 to the charge transfer insulator LaCoO3. In high-quality bi- and tri-layer systems grown using pulsed laser deposition, soft X-ray absorption, dichroism and STEM-EELS are used to probe the cobalt 3d-electron count and provide an element-specific investigation of the magnetic properties. The experiments prove a deterministically-tunable charge transfer process acting in the LaCoO3 within three unit cells of the heterointerface, able to generate full conversion to 3d7 divalent Co, which displays a paramagnetic ground state. The number of LaTiO3 / LaCoO3 interfaces, the thickness of an additional "break" layer between the LaTiO3 and LaCoO3, and the LaCoO3 film thickness itself in tri-layers provide a trio of sensitive control knobs for the charge transfer process, illustrating the efficacy of O2p-band alignment as a guiding principle for property design in complex oxide heterointerfaces.

cond-mat.mtrl-sci↗

arXiv2019

Spin chirality fluctuation in two-dimensional ferromagnets with perpendicular anisotropy

Non-coplanar spin textures with scalar spin chirality can generate effective magnetic field that deflects the motion of charge carriers, resulting in topological Hall effect (THE), a powerful probe of the ground state and low-energy excitations of correlated systems. However, spin chirality fluctuation in two-dimensional ferromagnets with perpendicular anisotropy has not been considered in prior studies. Herein, we report direct evidence of universal spin chirality fluctuation by probing the THE above the transition temperatures in two different ferromagnetic ultra-thin films, SrRuO$_3$ and V doped Sb$_2$Te$_3$. The temperature, magnetic field, thickness, and carrier type dependences of the THE signal, along with our Monte-Carlo simulations, unambiguously demonstrate that the spin chirality fluctuation is a universal phenomenon in two-dimensional Ising ferromagnets. Our discovery opens a new paradigm of exploring the spin chirality with topological Hall transport in two-dimensional magnets and beyond

cond-mat.mtrl-sci↗

arXiv2017

Thickness dependent properties in oxide heterostructures driven by structurally induced metal-oxygen hybridization variations

Thickness driven electronic phase transitions are broadly observed in different types of functional perovskite heterostructures. However, uncertainty remains whether these effects are solely due to spatial confinement, broken symmetry or rather to a change of structure with varying film thickness. Here, we present direct evidence for the relaxation of oxygen 2p and Mn 3d orbital (p-d) hybridization coupled to the layer dependent octahedral tilts within a La2/3Sr1/3MnO3 film driven by interfacial octahedral coupling. An enhanced Curie temperature is achieved by reducing the octahedral tilting via interface structure engineering. Atomically resolved lattice, electronic and magnetic structures together with X-ray absorption spectroscopy demonstrate the central role of thickness dependent p-d hybridization in the widely observed dimensionality effects present in correlated oxide heterostructures.

cond-mat.mtrl-sci↗

arXiv2016

Determining the energetics of vicinal perovskite oxide surfaces

The energetics of vicinal SrTiO$_3$(001) and DyScO$_3$(110), prototypical perovskite vicinal surfaces, has been studied using topographic atomic force microscopy imaging. The kink formation and strain relaxation energies are extracted from a statistical analysis of the step meandering. Both perovskite surfaces have very similar kink formation energies and exhibit a similar triangular step undulation. Our experiments suggest that the energetics of perovskite oxide surfaces is mainly governed by the local oxygen coordination.

cond-mat.mtrl-sci↗

arXiv2016

Tuning of large piezoelectric response in nanosheet-buffered lead zirconate titanate films on glass substrates

Renewed interest has been witnessed in utilizing the piezoelectric response of $PbZr_{0.52}Ti_{0.48}O_{3}$ (PZT) films on glass substrates for applications such as data storage and adaptive optics. Accordingly, new methodologies are being explored to grow well-oriented PZT thin films to harvest a large piezoelectric response. However, thin film piezoelectric response is significantly reduced compared to intrinsic response due to substrate induced clamping, even when films are well-oriented. Here, a novel method is presented to grow preferentially (100)-oriented PZT films on glass substrates by utilizing crystalline nanosheets as seed layers. Furthermore, increasing the repetition frequency up to 20 Hz during pulsed laser deposition helps to tune the film microstructure to hierarchically ordered columns that leads to reduced clamping and enhanced piezoelectric response evidenced by transmission electron microscopy and analytical calculations. A large piezoelectric response of 280 pm/V is observed in optimally tuned structure which almost triples the highest reported piezoelectric response on glass. To confirm that the clamping compromises the piezoelectric response, denser films are deposited using a lower repetition frequency and a $BiFeO_{3}$ buffer layer resulting in significantly reduced piezoelectric responses. This paper demonstrates a novel method for PZT integration on glass substrates without compromising the large piezoelectric response.

cond-mat.mtrl-sci↗

arXiv2016

Controlling the growth of Bi(110) and Bi(111) films on an insulating substrate

Here we demonstrate the controlled growth of Bi(110) and Bi(111) films on an (insulating) $α$-Al$_2$O$_3$(0001) substrate by surface X-ray diffraction and X-ray reflectivity using synchrotron radiation. At temperatures as low as 40 K, unanticipated pseudo-cubic Bi(110) films are grown having a thickness ranging from a few to tens of nanometers. The roughness at the film-vacuum as well as at the film-substrate interface, can be reduced by mild heating, where a crystallographic orientation transition of Bi(110) towards Bi(111) is observed at 400 K. From 450 K onwards high quality and ultrasmooth Bi(111) films are formed. Growth around the transition temperature results in the growth of competing Bi(110) and Bi(111) thin film domains.

cond-mat.mtrl-sci↗

arXiv2016

Interface Engineering in La0.67Sr0.33MnO3-SrTiO3 Heterostructures

Interface engineering is an extremely useful tool for systematically investigating materials and the various ways materials interact with each other. We describe different interface engineering strategies designed to reveal the origin of the electric and magnetic dead-layer at La0.67Sr0.33MnO3 interfaces. La0.67Sr0.33MnO3 is a key example of a strongly correlated peroskite oxide material in which a subtle balance of competing interactions gives rise to a ferromagnetic metallic groundstate. This balance, however, is easily disrupted at interfaces. We systematically vary the dopant profile, the disorder and the oxygen octahedra rotations at the interface to investigate which mechanism is responsible for the dead layer. We find that the magnetic dead layer can be completely eliminated by compositional interface engineering such that the polar discontinuity at the interface is removed. This, however, leaves the electrical dead-layer largely intact. We find that deformations in the oxygen octahedra network at the interface are the dominant cause for the electrical dead layer.

cond-mat.mtrl-sci↗

arXiv2016

Epitaxial growth of complex oxides on silicon by enhanced surface diffusion in large area pulsed laser deposition

Homogeneous highly epitaxial LaSrMnO3 (LSMO) thin films have been grown on Yttria-stabilized-Zirconia (YsZ) / CeO2 buffer layers on technological relevant 4" silicon wafers using a Twente Solid State Technology B.V. (TSST) developed large area Pulsed Laser Deposition (PLD) setup. We study and show the results of the effect of an additional SrRuO3 buffer layer on the growth temperature dependent structural and magnetic properties of LSMO films. With the introduction of a thin SrRuO3 layer on top of the buffer stack, LSMO films show ferromagnetic behaviour for growth temperatures as low as 250C. We suggest that occurrence of epitaxial crystal growth of LSMO at these low growth temperatures can be understood by an improved surface diffusion, which ensures sufficient intermixing of surface species for formation of the correct phase. This intermixing is necessary because the full plume is collected on the 4" wafer resulting in a compositional varying flux of species on the wafer, in contrast to small scale experiments.

cond-mat.mtrl-sci↗

arXiv2016

Tunable and temporally stable ferroelectric imprint through polarization coupling

Here we demonstrate a method to tune ferroelectric imprint, which is stable in time, based on the coupling between the non-switchable polarization of ZnO and switchable polarization of PbZrxTi(1-x)O3. SrRuO3/PbZrxTi(1-x)O3 /ZnO/SrRuO3 heterostructures were grown with different ZnO thicknesses. It is shown that the coercive voltages and ferroelectric imprint varies linearly with the thickness of ZnO. It is also demonstrated that the ferroelectric imprint remains stable with electric field cycling and electric field stress assisted aging.

cond-mat.mtrl-sci↗

arXiv2012

Metallic and insulating interfaces of amorphous SrTiO3-based oxide heterostructures

The conductance confined at the interface of complex oxide heterostructures provides new opportunities to explore nanoelectronic as well as nanoionic devices. Herein we show that metallic interfaces can be realized in SrTiO3-based heterostructures with various insulating overlayers of amorphous LaAlO3, SrTiO3 and yttria-stabilized zirconia films. On the other hand, samples of amorphous La7/8Sr1/8MnO3 films on SrTiO3 substrates remain insulating. The interfacial conductivity results from the formation of oxygen vacancies near the interface, suggesting that the redox reactions on the surface of SrTiO3 substrates play an important role.

cond-mat.mtrl-sci↗

arXiv2012

High temperature magnetic insulating phase in ultrathin La0.67Sr0.33MnO3 films

We present a study of the thickness dependence of magnetism and electrical conductivity in ultra thin La0.67Sr0.33MnO3 films grown on SrTiO3 (110) substrates. We found a critical thickness of 10 unit cells below which the conductivity of the films disappeared and simultaneously the Curie temperature (TC) increased, indicating a magnetic insulating phase at room temperature. These samples have a TC of about 560 K with a significant saturation magnetization of 1.2 +- 0.2 muB/Mn. The canted antiferromagnetic insulating phase in ultra thin films of n< 10 coincides with the occurrence of a higher symmetry structural phase with a different oxygen octahedra rotation pattern. Such a strain engineered phase is an interesting candidate for an insulating tunneling barrier in room temperature spin polarized tunneling devices.

cond-mat.mtrl-sci↗

arXiv2012

Preventing the reconstruction of the polar discontinuity at oxide heterointerfaces

Perovskite oxide heteroepitaxy receives much attention because of the possibility to com- bine the diverse functionalities of perovskite oxide building blocks. A general boundary con- dition for the epitaxy is the presence of polar discontinuities at heterointerfaces. These polar discontinuities result in reconstructions, often creating new functionalities at the interface. However, for a significant number of materials these reconstructions are unwanted as they alter the intrinsic materials properties at the interface. Therefore, a strategy to eliminate this reconstruction of the polar discontinuity at the interfaces is required. We show that the use of compositional interface engineering can prevent the reconstruction at the La0.67Sr0.33MnO3/SrTiO3 (LSMO/STO) interface. The polar discontinuity at this interface can be removed by the insertion of a single La0.33Sr0.67O layer, resulting in improved interface magnetization and electrical conductivity.

cond-mat.mtrl-sci↗