Searcharxiv⌕ Search

arXiv subjects

H. Meyer

Publications and source records attributed to H. Meyer.

At least 37 records · Page 2Linked to original sources
arXiv2015

Dependence of intrinsic rotation reversals on collisionality in MAST

Tokamak plasmas rotate even without external injection of momentum. A Doppler backscattering system installed at MAST has allowed this intrinsic rotation to be studied in Ohmic L-mode and H-mode plasmas, including the first observation of intrinsic rotation reversals in a spherical tokamak. Experimental results are compared to a novel 1D model, which captures the collisionality dependence of the radial transport of toroidal angular momentum due to the effect of neoclassical flows on turbulent fluctuations. The model is able to accurately reproduce the change in sign of core toroidal rotation, using experimental density and temperature profiles from shots with rotation reversals as inputs and no free parameters fit to experimental data.

physics.plasm-ph↗
arXiv2014

QCD and strongly coupled gauge theories: challenges and perspectives

We highlight the progress, current status, and open challenges of QCD-driven physics, in theory and in experiment. We discuss how the strong interaction is intimately connected to a broad sweep of physical problems, in settings ranging from astrophysics and cosmology to strongly-coupled, complex systems in particle and condensed-matter physics, as well as to searches for physics beyond the Standard Model. We also discuss how success in describing the strong interaction impacts other fields, and, in turn, how such subjects can impact studies of the strong interaction. In the course of the work we offer a perspective on the many research streams which flow into and out of QCD, as well as a vision for future developments.

hep-ph↗
arXiv2014

Measurement of Charged Pion Production Yields off the NuMI Target

The fixed-target MIPP experiment, Fermilab E907, was designed to measure the production of hadrons from the collisions of hadrons of momenta ranging from 5 to 120 GeV/c on a variety of nuclei. These data will generally improve the simulation of particle detectors and predictions of particle beam fluxes at accelerators. The spectrometer momentum resolution is between 3 and 4%, and particle identification is performed for particles ranging between 0.3 and 80 GeV/c using $dE/dx$, time-of-flight and Cherenkov radiation measurements. MIPP collected $1.42 \times10^6$ events of 120 GeV Main Injector protons striking a target used in the NuMI facility at Fermilab. The data have been analyzed and we present here charged pion yields per proton-on-target determined in bins of longitudinal and transverse momentum between 0.5 and 80 GeV/c, with combined statistical and systematic relative uncertainties between 5 and 10%.

hep-ex↗
arXiv2013

MAST-Upgrade Divertor Facility and Assessing Performance of Long-Legged Divertors

A potentially important feature in a divertor design for a high-power tokamak is an extended and expanded divertor leg. The upgrade to MAST will allow a wide range of such divertor leg geometries to be produced, and hence will allow the roles of greatly increased connection length and flux expansion to be experimentally tested. This will include testing the potential of the Super-X configuration [1]. The design process for the upgrade has required analysis of producing and controlling the magnetic configurations, and has included consideration of the roles that divertor closure and increasing magnetic connection length will play.

physics.plasm-ph↗
arXiv2012

Strictly two-dimensional self-avoiding walks: Thermodynamic properties revisited

The density crossover scaling of various thermodynamic properties of solutions and melts of self-avoiding and highly flexible polymer chains without chain intersections confined to strictly two dimensions is investigated by means of molecular dynamics and Monte Carlo simulations of a standard coarse-grained bead-spring model. In the semidilute regime we confirm over an order of magnitude of the monomer density rho the expected power-law scaling for the interaction energy between different chains e_inter\simρ^(21/8), the total pressure P\simρ^3 and the dimensionless compressibility gT=lim(q->0)(S(q)\sim1/ρ^2). Various elastic contributions associated to the affine and non-affine response to an infinitesimal strain are analyzed as functions of density and sampling time. We show how the size xi(rho) of the semidilute blob may be determined experimentally from the total monomer structure factor S(q) characterizing the compressibility of the solution at a given wavevector q. We comment briefly on finite persistence length effects.

cond-mat.soft↗
arXiv2011

Interchain monomer contact probability in two-dimensional polymer solutions

Using molecular dynamics simulation of a standard bead-spring model we investigate the density crossover scaling of strictly two-dimensional self-avoiding polymer chains focusing on properties related to the contact exponent set by the intrachain subchain size distribution. Irrespective of the density sufficiently long chains are found to consist of compact packings of blobs of fractal perimeter dimension dp = 5/4.

cond-mat.soft↗
arXiv2011

Scale-free static and dynamical correlations in melts of monodisperse and Flory-distributed homopolymers: A review of recent bond-fluctuation model studies

It has been assumed until very recently that all long-range correlations are screened in three-dimensional melts of linear homopolymers on distances beyond the correlation length $ξ$ characterizing the decay of the density fluctuations. Summarizing simulation results obtained by means of a variant of the bond-fluctuation model with finite monomer excluded volume interactions and topology violating local and global Monte Carlo moves, we show that due to an interplay of the chain connectivity and the incompressibility constraint, both static and dynamical correlations arise on distances $r \gg ξ$. These correlations are scale-free and, surprisingly, do not depend explicitly on the compressibility of the solution. Both monodisperse and (essentially) Flory-distributed equilibrium polymers are considered.

cond-mat.soft↗
arXiv2010

Forward Neutron Production at the Fermilab Main Injector

We have measured cross sections for forward neutron production from a variety of targets using proton beams from the Fermilab Main Injector. Measurements were performed for proton beam momenta of 58 GeV/c, 84 GeV/c, and 120 GeV/c. The cross section dependence on the atomic weight (A) of the targets was found to vary as $A^(alpha)$ where $α$ is $0.46\pm0.06$ for a beam momentum of 58 GeV/c and 0.54$\pm$0.05 for 120 GeV/c. The cross sections show reasonable agreement with FLUKA and DPMJET Monte Carlos. Comparisons have also been made with the LAQGSM Monte Carlo.

hep-ex↗
arXiv2010

Static Properties of Polymer Melts in Two Dimensions

Self-avoiding polymers in strictly two-dimensional ($d=2$) melts are investigated by means of molecular dynamics simulation of a standard bead-spring model with chain lengths ranging up to N=2048. % The chains adopt compact configurations of typical size $R(N) \sim N^ν$ with $ν=1/d$. % The precise measurement of various distributions of internal chain distances allows a direct test of the contact exponents $Θ_0=3/8$, $Θ_1=1/2$ and $Θ_2=3/4$ predicted by Duplantier. % Due to the segregation of the chains the ratio of end-to-end distance $\Rend(N)$ and gyration radius $\Rgyr(N)$ becomes $\Rend^2(N)/\Rgyr^2(N) \approx 5.3 < 6$ for $N \gg 100$ and the chains are more spherical than Gaussian phantom chains. % The second Legendre polynomial $P_2(s)$ of the bond vectors decays as $P_2(s) \sim 1/s^{1+νΘ_2}$ measuring thus the return probability of the chain after $s$ steps. % The irregular chain contours are shown to be characterized by a perimeter length $L(N) \sim R(N)^{\dc}$ of fractal line dimension $\dc = d-Θ_2 =5/4$. % % In agreement with the generalized Porod scattering of compact objects with fractal contour the Kratky representation of the intramolecular structure factor $F(q)$ reveals a strong non-monotonous behavior with $q^dF(q) \sim 1/(q R(N))^{Θ_2}$ in the intermediate regime of the wave vector $q$. This may allow to confirm the predicted contour fractality in a real experiment.

cond-mat.soft↗
arXiv2010

Charged Kaon Mass Measurement using the Cherenkov Effect

The two most recent and precise measurements of the charged kaon mass use X-rays from kaonic atoms and report uncertainties of 14 ppm and 22 ppm yet differ from each other by 122 ppm. We describe the possibility of an independent mass measurement using the measurement of Cherenkov light from a narrow-band beam of kaons, pions, and protons. This technique was demonstrated using data taken opportunistically by the Main Injector Particle Production experiment at Fermi National Accelerator Laboratory which recorded beams of protons, kaons, and pions ranging in momentum from +37 GeV/c to +63 GeV/c. The measured value is 491.3 +/- 1.7 MeV/c^2, which is within 1.4 sigma of the world average. An improvement of two orders of magnitude in precision would make this technique useful for resolving the ambiguity in the X-ray data and may be achievable in a dedicated experiment.

hep-ex↗
arXiv2009

Distance dependence of angular correlations in dense polymer solutions

Angular correlations in dense solutions and melts of flexible polymer chains are investigated with respect to the distance $r$ between the bonds by comparing quantitative predictions of perturbation calculations with numerical data obtained by Monte Carlo simulation of the bond-fluctuation model. We consider both monodisperse systems and grand-canonical (Flory-distributed) equilibrium polymers. Density effects are discussed as well as finite chain length corrections. The intrachain bond-bond correlation function $P(r)$ is shown to decay as $P(r) \sim 1/r^3$ for $ξ\ll r \ll \r^*$ with $ξ$ being the screening length of the density fluctuations and $r^* \sim N^{1/3}$ a novel length scale increasing slowly with (mean) chain length $N$.

cond-mat.soft↗
arXiv2009

Perimeter Length and Form Factor of Two-Dimensional Polymer Melts

Self-avoiding polymers in two-dimensional ($d=2$) melts are known to adopt compact configurations of typical size $R(N) \sim N^{1/d}$ with $N$ being the chain length. Using molecular dynamics simulations we show that the irregular shapes of these chains are characterized by a perimeter length $L(N) \sim R(N)^{\dpm}$ of fractal dimension $\dpm = d-Θ_2 =5/4$ with $Θ_2=3/4$ being a well-known contact exponent. Due to the self-similar structure of the chains, compactness and perimeter fractality repeat for subchains of all arc-lengths $s$ down to a few monomers. The Kratky representation of the intramolecular form factor $F(q)$ reveals a strong non-monotonous behavior with $q^2F(q) \sim 1/(qN^{1/d})^{Θ_2}$ in the intermediate regime of the wavevector $q$. Measuring the scattering of labeled subchains %($s F(q) \sim L(s)$) the form factor may allow to test our predictions in real experiments.

cond-mat.soft↗
arXiv2009

Electromagnetic and Hadron Calorimeters in the MIPP Experiment

The purpose of the MIPP experiment is to study the inclusive production of photons, pions, kaons and nucleons in pi, K and p interactions on various targets using beams from the Main Injector at Fermilab. The function of the calorimeters is to measure the production of forward-going neutrons and photons. The electromagnetic calorimeter consist of 10 lead plates interspersed with proportional chambers. It was followed by the hadron calorimeter with 64 steel plates interspersed with scintillator. The data presented were collected with a variety of targets and beam momenta from 5 GeV/c to 120 GeV/c. The energy calibration of both calorimeters with electrons, pions, kaons, and protons is discussed. The resolution for electrons was found to be 0.27/sqrt(E), and for hadrons the resolution was 0.554/sqrt(E) with a constant term of 2.6%. The performance of the calorimeters was tested on a neutron sample.

physics.ins-det↗
arXiv2007

Static Rouse Modes and Related Quantities: Corrections to Chain Ideality in Polymer Melts

Following the Flory ideality hypothesis intrachain and interchain excluded volume interactions are supposed to compensate each other in dense polymer systems. Multi-chain effects should thus be neglected and polymer conformations may be understood from simple phantom chain models. Here we provide evidence against this phantom chain, mean-field picture. We analyze numerically and theoretically the static correlation function of the Rouse modes. Our numerical results are obtained from computer simulations of two coarse-grained polymer models for which the strength of the monomer repulsion can be varied, from full excluded volume (`hard monomers') to no excluded volume (`phantom chains'). For nonvanishing excluded volume we find the simulated correlation function of the Rouse modes to deviate markedly from the predictions of phantom chain models. This demonstrates that there are nonnegligible correlations along the chains in a melt. These correlations can be taken into account by perturbation theory. Our simulation results are in good agreement with these new theoretical predictions.

cond-mat.soft↗
arXiv2007

Preparing for N_f=2 simulations at small lattice spacings

We discuss some large effects of dynamical fermions. One is a cutoff effect, others concern the contribution of multi-pion states to correlation functions and are expected to survive the continuum limit. We then turn to the preparation for simulations at small lattice spacings which we are planning down to around a=0.04fm in order to understand the size of O(a^2)-effects of the standard O(a)-improved theory. The dependence of the lattice spacing on the bare coupling is determined through the Schr"odinger functional renormalized coupling.

hep-lat↗
arXiv2007

Intramolecular long-range correlations in polymer melts: The segmental size distribution and its moments

Presenting theoretical arguments and numerical results we demonstrate long-range intrachain correlations in concentrated solutions and melts of long flexible polymers which cause a systematic swelling of short chain segments. They can be traced back to the incompressibility of the melt leading to an effective repulsion $u(s) \approx s/ρR^3(s) \approx ce/\sqrt{s}$ when connecting two segments together where $s$ denotes the curvilinear length of a segment, $R(s)$ its typical size, $ce \approx 1/ρbe^3$ the ``swelling coefficient", $be$ the effective bond length and $ρ$ the monomer density. The relative deviation of the segmental size distribution from the ideal Gaussian chain behavior is found to be proportional to $u(s)$. The analysis of different moments of this distribution allows for a precise determination of the effective bond length $be$ and the swelling coefficient $ce$ of asymptotically long chains. At striking variance to the short-range decay suggested by Flory's ideality hypothesis the bond-bond correlation function of two bonds separated by $s$ monomers along the chain is found to decay algebraically as $1/s^{3/2}$. Effects of finite chain length are considered briefly.

cond-mat.soft↗
arXiv2007

Why polymer chains in a melt are not random walks

A cornerstone of modern polymer physics is the `Flory ideality hypothesis' which states that a chain in a polymer melt adopts `ideal' random-walk-like conformations. Here we revisit theoretically and numerically this pivotal assumption and demonstrate that there are noticeable deviations from ideality. The deviations come from the interplay of chain connectivity and the incompressibility of the melt, leading to an effective repulsion between chain segments of all sizes $s$. The amplitude of this repulsion increases with decreasing $s$ where chain segments become more and more swollen. We illustrate this swelling by an analysis of the form factor $F(q)$, i.e. the scattered intensity at wavevector $q$ resulting from intramolecular interferences of a chain. A `Kratky plot' of $q^2F(q)$ {\em vs.} $q$ does not exhibit the plateau for intermediate wavevectors characteristic of ideal chains. One rather finds a conspicuous depression of the plateau, $δ(F^{-1}(q)) = |q|^3/32ρ$, which increases with $q$ and only depends on the monomer density $ρ$.

cond-mat.soft↗