Searcharxiv⌕ Search

arXiv subjects

Haibo Dong

Publications and source records attributed to Haibo Dong.

17 recordsLinked to original sources
arXiv2025

Tuna-Like Swimmers Experience a Fluid-Mediated Stable Side-by-Side Formation

New free-swimming experiments and simulations are conducted on a pair of three-dimensional, bio-robotic swimmers composed of a body and tail section based on Yellowfin tuna, Thunnus albacares. It is discovered that the pair converges spontaneously to a side-by-side schooling formation that is stable to perturbations in the swimming direction at a fixed lateral spacing. We reveal that for close lateral spacings of 43% of the body length and thick, tuna-like bodies with a 22% thickness-to-length ratio, the flow between the swimmers is accelerated in a "channeling effect" due to flow constriction. Consequently, this creates a low-pressure zone that is the primary mechanism generating a fluid-mediated restorative force, thereby making the side-by-side formation hydrodynamically stable. This quasi-steady mechanism makes the stability of the formation insensitive to the phase synchronization between the bio-robots in contrast to previous results for schooling foils. Moreover, in the side-by-side formation tunalike swimmers are seen to have only a small reduction in their swimming speed and a concurrent small rise in their cost of transport. By leveraging this channeling effect, bio-robotic schools may be able to maintain a schooling formation with little or no control. This flow mechanism may also be present in biological schools of tuna-like fish where it may sculpt the formations observed in nature.

physics.flu-dyn↗
arXiv2025

Hydrodynamic interactions of low-aspect-ratio oscillating panels in a tip-to-tip formation

The vertical, tip-to-tip arrangement of neighboring caudal fins, common in densely packed fish schools, has received much less attention than staggered or side-by-side pairings. We explore this configuration using a canonical system of two trapezoidal plates (aspect ratio AR = 1.2) that pitch about their leading edges while heaving harmonically at a Strouhal number St = 0.45 and a reduced frequency k = 2.09. Direct numerical simulations based on an immersed-boundary method are conducted over a Reynolds number range of 600 <= Re <= 1e4, and complementary water-channel experiments extend this range to 1e4 <= Re <= 3e4, thereby validating the computations at higher flow speeds. Results indicate that when the plates oscillate in phase at a nondimensional vertical spacing H/c <= 1.0, the cycle-averaged thrust coefficient of each plate rises by up to 14.5% relative to an isolated plate; the enhancement decreases monotonically as the spacing increases. Anti-phase motion instead lowers the time-average power coefficient by up to 6%, with only a modest thrust penalty, providing an alternative interaction regime. Flow visualization shows that in-phase kinematics accelerate the stream between the plates, intensifying the adjacent leading-edge vortices. Downstream, the initially separate vortex rings merge into a single, larger ring that is strongly compressed in the spanwise direction; this wake compression correlates with the measured thrust gain. The interaction mechanism and its quantitative benefits persist throughout the entire numerical and experimental Reynolds-number sweep, indicating weak Re-sensitivity within 600 <= Re <= 3e4. These results provide the first three-dimensional characterization of tip-to-tip flapping-plate interactions, establish scaling trends with spacing and phase, and offer a reference data set for reduced-order models of vertically stacked propulsors.

physics.flu-dyn↗
arXiv2024

An Untethered Bioinspired Robotic Tensegrity Dolphin with Multi-Flexibility Design for Aquatic Locomotion

This paper presents the first steps toward a soft dolphin robot using a bio-inspired approach to mimic dolphin flexibility. The current dolphin robot uses a minimalist approach, with only two actuated cable-driven degrees of freedom actuated by a pair of motors. The actuated tail moves up and down in a swimming motion, but this first proof of concept does not permit controlled turns of the robot. While existing robotic dolphins typically use revolute joints to articulate rigid bodies, our design -- which will be made opensource -- incorporates a flexible tail with tunable silicone skin and actuation flexibility via a cable-driven system, which mimics muscle dynamics and design flexibility with a tunable skeleton structure. The design is also tunable since the backbone can be easily printed in various geometries. The paper provides insights into how a few such variations affect robot motion and efficiency, measured by speed and cost of transport (COT). This approach demonstrates the potential of achieving dolphin-like motion through enhanced flexibility in bio-inspired robotics.

cs.RO↗
arXiv2020

Larger wavelengths suit the hydrodynamics of carangiform swimmers

The wavelength of undulatory kinematics of fish is an important parameter to determine their hydrodynamic performance. This study focuses on numerical examination of this feature by reconstructing the real physiological model and kinematics of steadily swimmning Jack Fish. We perform three-dimensional numerical simulations for flows over these models composed of the trunk, and dorsal, anal, and caudal fins. Moreover, we prescribe the carangiform-like motion for its undulation for a range of wavelengths. Undulation with larger wavelengths improves the hydrodynamic performance of the carangiform swimmer in terms of better thrust production by the caudal fin, lower drag production on the trunk, and reduced power consumption by the trunk. This coincides with the formation of stronger posterior body vortices and leading-edge vortices with more circulation on the caudal fin. The real kinematics of Jack Fish surpasses the performance of those with prescribed motion owing to the flexibility of the caudal fin.

physics.flu-dyn↗
arXiv2020

Modal Decompositions of the Kinematics of Crevalle Jack and the Fluid-Caudal Fin Interaction

To understand the governing mechanisms of bio-inspired swimming has always been challenging due to intense interactions between the flexible bodies of natural aquatic species and water around them. In this paper, we employ advanced modal decomposition techniques; proper orthogonal decomposition and dynamic mode decomposition, to extract energetically strongest spatio-temporal orthonormal components of complex kinematics of a Crevalle Jack (Caranx hippos) fish. Then, we present a computational framework for handling fluid-structure interaction related problems in order to investigate their contributions towards the overall dynamics of highly nonlinear systems. We find that the undulating motion of this fish can be described by only two standing-wave like spatially orthonormal modes. Constructing the data set from our numerical simulations for flows over the membranous caudal fin of the Jack fish, our modal analyses reveal that only the first few modes receive energy from both the fluid and structure, but the contribution of fluid in the higher modes is minimal. For the viscous and transitional flow conditions considered here, both spatially and temporally orthonormal modes show strikingly similar coherent flow structures. Our investigations are expected to assist in developing data-driven reduced-dimensional mathematical models to examine the dynamics of bio-inspired swimming robots and develop new and effective control strategies to bring their performance closer to real fish species.

physics.flu-dyn↗
arXiv2019

Flow Transitions and Mapping for Undulating Swimmers

Natural swimmers usually perform undulations to propel themselves and perform a range of maneuvers. These include various biological species ranging from micro-sized organisms to large-sized fishes that undulate at typical kinematic patterns. In this paper, we consider anguilliform and carangiform swimming modes to perform numerical simulations using an immersed-boundary methods based computational solver at various Reynolds number regimes. We carry out thorough studies using wavelength and Strouhal frequency as the governing parameters for the hydrodynamic performance of undulating swimmers. Our analysis shows that the anguilliform kinematics achieves better hydrodynamic efficiency for viscous flow regime, whereas for flows with higher Reynolds number, the wavelength of the wavy motion dictates which kinematics will outperform the other. We find that the constructive interference between vortices produced at anterior parts of the bodies and co-rotating vortices present at the posterior parts plays an important role in reversing the direction of Benard-von Karman vortex street. Since most of the thrust producing conditions appear to cause wake deflection; a critical factor responsible for degrading the hydrodynamic efficiency of a swimmer, we discuss the underlying mechanics that would trigger this phenomenon. We demonstrate that the choice of kinematic and flow conditions may be restricted for the natural swimmers due to their morphological structures, but our findings provide a guideline on their selection for bio-inspired underwater vehicles.

physics.flu-dyn↗
arXiv2018

Adjoint-based optimization for thrust performance of a three-dimensional pitching-rolling plate

An adjoint-based optimization is applied to study the thrust performance of a pitching-rolling ellipsoidal plate in a uniform stream at Reynolds number 100. To achieve the highest thrust, the optimal kinematics of pitching-rolling motion is sought in a large control space including the pitching amplitude, the rolling amplitude, and the phase delay between the pitching and rolling motion. A continuous adjoint approach with boundary motion being handled by non-cylindrical calculous is developed as a computationally efficient optimization algorithm to deal with the large control space with morphing domain. The comparison between the optimal motion and other reference motions shows a significant improvement of thrust from the increase of rolling amplitude and an optimal phase delay of $122.6^\circ$ between the pitching and the rolling motion. The combination of these two factors impacts the overall thrust performance through their strong effects on the angle of attack, circulation, and the pressure distribution on the plate. Further wake structure analysis suggests that the optimal control improves its propulsive performance by generating a stronger leading-edge vortex (LEV) and straightening the wake deflection.

physics.flu-dyn↗
arXiv2018

Vorticity dynamics of revolving wings: The role of planetary vortex tilting on the stability of the leading-edge vortex

This work investigated the vorticity dynamics and stability of leading-edge vortices (LEVs) in revolving wings. Previous studies suggested that Coriolis acceleration and spanwise flow both played key roles in stabilizing the LEV; however, the exact mechanism remains unclear. The current study examined a mechanism that relates the effects of Coriolis acceleration, spanwise flow, and the tilting of the planetary vortex on limiting the growth of the LEV. Specifically, this mechanism states that a vertical gradient in spanwise flow can create a vertical gradient in Coriolis acceleration, which will in turn produce oppositely-signed vorticity within the LEV. This gradient of Coriolis acceleration corresponds to the spanwise (radial) component of planetary vortex tilting (PVTr) that reorients the planetary vortex into the spanwise direction therefore creating oppositely-signed LEV vorticity. Using an in-house, immersed-boundary-method flow solver, this mechanism was investigated alongside the other vorticity dynamics for revolving wings of varying aspect ratio (AR=3, 5, and 7) and Reynolds number (Re=110, and 1400). Analyses of vorticity dynamics showed that the PVTr consistently produced oppositely-signed vorticity for all values of AR and Re investigated, although other three-dimensional phenomena play a similar but more dominant role when Re = 1400. In addition, the relative strength of the PVTr increased with increasing AR due to a decrease in the magnitude of advection. Finally, the effects of AR and Re on the vorticity dynamics and LEV stability were also investigated.

physics.flu-dyn↗
arXiv2017

Optimized Body Deformation in Dragonfly Maneuvers

Tail bending associated with maneuvering flight of insects is a known phenomenon although there are only a few studies which analyze and quantify the effects and benefits of body configuration changes. We hypothesized that these configuration changes help reduce the energy expenditure in flight. This is quantified by the magnitude of the aerodynamic torque generated by the insect during the maneuver. To test our hypothesis, a dragonfly body model was constructed with the ability to bend at the joint between the thorax and the tail. An optimization problem was defined to find the dynamic body configuration which minimizes the total pitch and yaw torque. The magnitude of the tail deflection was found to be directly correlated with the yaw velocity of the body. Most importantly, our results indicate that for executing the same aerial maneuver, an insect with a flexible body was found to require substantially smaller flight torque when compared to an insect with identical morphology but possessing a rigid body. In addition, changes in the instantaneous mass distribution of the body had the most substantial effect on reducing the flight torque, while the inertial term due to the tail movement had a smaller effect.

physics.bio-ph↗
arXiv2015

Coupling of the wings and the body dynamics enhances damselfly maneuverability

In flapping flight, motion of the wings through the air generates the majority of the force and torque that controls the body motion. On the other hand, it is not clear how much effect the body motion imposes on the wings. We investigated this connection via analyzing fast yaw turns of three different species of damselfly. In this combined experimental and theoretical study, we show that the dynamics of the wings and the body are coupled together in low frequency flapping flight. As a result, damselflies benefit from a passive mechanism for enhancing the bilateral wing pitch angle asymmetry to sustain the body rotation. A physics-based model derived from this mechanism is proved valid for linking morphology, kinematics and dynamics of the wing and the body of the flying insects in fast turning maneuvers.

physics.flu-dyn↗
arXiv2015

Study of turning takeoff maneuver in free-flying dragonflies: effect of dynamic coupling

Turning takeoff flights of several dragonflies were recorded during which a dragonfly takes off while changing the flight direction at the same time. Center of mass was elevated about 1-2 body lengths. Five of these maneuvers were selected for 3D body surface reconstruction and the body orientation measurement. In oppose to conventional banked turn model, which neglects interactions between the rotational motions, in this study we investigated the strength of the dynamic coupling by dividing pitch, roll and yaw angular accelerations into two contributions: one from aerodynamic torque and one from dynamic coupling effect. The latter term is referred to as Dynamic Coupling Acceleration (DCA). The DCA term can be measured directly from instantaneous rotational velocities of the insect. We found a strong correlation between pitch and yaw velocities at the end of each wingbeat and the time integral of the corresponding DCA term. Generation of pitch, roll and yaw torques requires different aerodynamic mechanisms and is limited due to the other requirements of the flight. Our results suggest that employing DCA term gives the insect capability to perform a variety of maneuvers without fine adjustments in the aerodynamic torque.

physics.flu-dyn↗
arXiv2013

Flying with Abrupt Wing Flapping: Damselfly in Darting Flight

Damselflies show abrupt, darting flight, which is the envy of aero-engineers. This amazing ability is used both to capture prey and, by males, to establish territories that can attract females. In this work, high-resolution, high-speed videos of a damselfly (Hetaerina Americana) in darting flight were obtained using a photogrammetry system. Using a 3D subdivision surface reconstruction methodology, the damselfly's wing deformation and kinematics were modeled and reconstructed from those videos. High fidelity simulations were then carried out in order to understand vortex formation in both near-field and far-field of damselfly wings and examine the associated aerodynamic performance. A Cartesian grid based sharp interface immersed boundary solver was used to handle such flows in all their complexity.

physics.flu-dyn↗
arXiv2012

Unsteady Flow and Force Control in Butterfly Take-off Flight

In this work, high-resolution, high-speed videos of a Monarch butterfly (Danaus plexippus) in take-off flight were obtained using a photogrammetry system. Using a 3D subdivision surface reconstruction methodology, the butterfly's body/wing deformation and kinematics were modeled and reconstructed from those videos. High fidelity simulations were then carried out in order to understand vortex formation in both near-field and far-field of butterfly wings and examine the associated aerodynamic performance. A Cartesian grid based sharp interface immersed boundary solver was used to handle such flows in all their complexity.

physics.flu-dyn↗
arXiv2011

Cicada: a Heavy but Agile Flyer

"Cicada: a Heavy but Agile Flyer" is a fluid dynamic video submitted to Gallery of Fluid Motion in APS-DFD 2011. Comparing to other insects, cicadas can generate much higher lift to overcome their large body weight. The hidden mechanism may help in designing a Micro Air Vehicle (MAV) to carry large payloads. However, it is lack of literatures in discussing how cicadas use their wings to accomplish various flights. In this work, a high-speed photogrammetry system and 3D surface reconstruction technology are used to reveal cicada wing kinematics and deformation during a freely forward flight. The aerodynamic performance is studied using in-house immerse boundary method based Computational Fluid Dynamics(CFD) solver.

physics.flu-dyn↗
arXiv2011

Deterioration of Damselfly Flight Performance due to Wing Damage

In this video, effect of chordwise damage on a damselfly (American Rubyspot)'s wings is investigated. High speed photogrammetry was used to collect the data of damselflies' flight with intact and damaged wings along the wing chord. Different level of deterioration of flight performance can be observed. Further investigation will be on the dynamic and aerodynamic roles of each wing with and without damage.

physics.flu-dyn↗
arXiv2011

Marching of Freely Falling Plates

"Marching of freely falling plates" is a fluid dynamics video for the Gallery of Fluid Motion submitted to APS-DFD 2011 at Baltimore Maryland. The problem of a freely falling plate is of interest in both fluid mechanics and nonlinear dynamics. The trajectory of the plate can be regular (Willmarth et al., 1964) or chaotic (Aref and Jones, 1993). As long as Reynolds number is high enough, regular flutter and tumble motion can be obtained for plates with small and large Froude numbers respectively. Belmonte et al. (1998) conducted experimental study on thin flat strips falling in a vertical cell. They categorized the Froude number at which the transition from fluttering to tumbling occurs. Andersen et al. (2005) analyzed the transitions between fluttering and tumbling using vorticity-stream function formulation and ODE dynamic equations based on quasi-steady models. They also found that the fluid circulation is mainly generated by the plate rotation and its angular velocity. However, the correlation among the plate motion, generated vortices, and aerodynamic forces is still not fully understood yet, especially in the case of multiple bodies. The DNS (Direct Numerical Simulation, Dong et al., 2006) of freely falling plates is conducted using our in-house CFD (Computational Fluid Dynamics) solver. Showcased examples in this video are a part of DNS results in the attempt to answer the above question.

physics.flu-dyn↗