arXiv subjects

Hannah Stickler

Publications and source records attributed to Hannah Stickler.

17 recordsLinked to original sources

arXiv2026

Enhanced Sensitivity near a Quantum Exceptional Point in the Absence of Engineered Dissipation

Non-Hermitian systems exhibit phenomena absent from Hermitian systems, including exceptional points (EPs), at which two or more eigenvectors coalesce. Conventional implementations rely on gain and loss, which strongly limit quantum coherence. Here, following a proposal by Wang and Clerk (PRA 2019), we realize a closed four-mode quantum system that emulates the dynamics of a PT dimer - two coupled resonators with balanced gain and loss - without engineered dissipation. The four modes are implemented as harmonics of a superconducting coplanar-waveguide resonator, with parametric couplings engineered using a current-pumped SNAIL. We use this device as a sensor for small variations in the PT dimer coupling strength. From signal-to-noise-ratio measurements, we observe enhanced sensitivity near the EP in a non-quantum-limited regime.

quant-ph↗

arXiv2026

Driven-dissipative entanglement of distant giant atoms

Quantum interconnects distribute entanglement via controlled light-matter interactions for quantum computing and sensing applications. Many entanglement generation schemes use coherent, reversible interactions that require precisely calibrated pulses to execute. In contrast, driven-dissipative protocols use a continuous-wave drive in the presence of correlated dissipation to stabilize entanglement in protected (dark) states. However, the same dissipation that generates the entanglement also limits its utility once the stabilization protocol ends. Here, we engineer a superconducting system of two giant artificial atoms coupled sequentially to a waveguide, with tunable individual and correlated dissipation enabled by interference between coupling points. Continuously driving the atoms through the waveguide exploits correlated dissipation to generate remote entanglement. We then tune the qubit frequencies in situ to suppress individual dissipation and thereby preserve the entanglement, achieving a Bell-state fidelity F = 0.89 +/- 0.02. This demonstration indicates that the driven dissipation of giant atoms is a viable approach for distributing entanglement across quantum networks.

quant-ph↗

arXiv2026

Characterization of Aluminum Microwave SQUID Multiplexers for CE$\nu$NS Detection

We present the design, fabrication, and characterization of an aluminum-based six-channel microwave SQUID multiplexer ($\mu$MUX) prototype for transition-edge sensor (TES) readout in the RICOCHET experiment. The device consists of aluminum coplanar-waveguide resonators and RF SQUIDs with Dolan-style Al/AlO$_x$/Al Josephson junctions. By measuring the resonator scattering parameters at a range of probe tone frequencies, powers, and flux bias points, we demonstrate agreement between the device response and existing multiplexer models. We also characterize the noise performance in both open-loop and flux-ramping modes. With a high electron mobility transistor (HEMT) amplifier, open-loop measurements yield a flux sensitivity of 1-1.5 $\mu\Phi_0/\sqrt{Hz}$. With flux-ramp modulation, low-frequency 1/f noise is suppressed, and the flux sensitivity is around 3-4 $\mu\Phi_0/\sqrt{Hz}$, corresponding to a current sensitivity of 24-33 $pA/\sqrt{Hz}$ at the input coil. We further demonstrate a reduction in readout noise by incorporating a Josephson traveling-wave parametric amplifier (JTWPA) between the $\mu$MUX and the HEMT. This achieves an open-loop flux sensitivity of 0.3-0.6 $\mu\Phi_0/\sqrt{Hz}$ and an effective system noise temperature below 1 K. These results establish aluminum $\mu$MUX devices as a viable and extensible readout technology for low-noise cryogenic detector arrays.

physics.ins-det↗

arXiv2026

Characterization and Comparison of Energy Relaxation in Fluxonium Qubits

Fluxonium superconducting qubits have demonstrated long coherence times and high single- and two-qubit gate fidelities, making them a favorable building block for superconducting quantum processors. We investigate the dominant limitations to fluxonium qubit energy relaxation time $T_1$ using a set of eight planar, aluminum-on-silicon qubits. We find that a circuit-based model for capacitive dielectric loss best captures the frequency dependence of $T_1$, which we analyze within both a two-level and a six-level energy relaxation model. We convert the measured $T_1$ into an effective capacitive quality factor $Q_\mathrm{C}^{\mathrm{eff}}$ to compare qubits on equal footing, accounting for independently estimated contributions from $1/f$ flux noise and radiative loss to the control and readout circuitry. We apply this methodology to compare qubits from two fabrication processes: a baseline process and one that applies a fluorine-based wet treatment prior to Josephson junction deposition. We resolve a small improvement of (13.8 $\pm$ 8.4$)\%$ in the process mean $Q_\mathrm{C}^{\mathrm{eff}}$, indicating that the fluorine treatment may have reduced loss from the metal-substrate interface, but did not address the primary source of loss in these fluxonium qubits.

quant-ph↗

arXiv2026

Distinguishing types of correlated errors in superconducting qubits

Errors in superconducting qubits that are correlated in time and space can pose problems for quantum error correction codes. Radiation from cosmic and terrestrial sources can increase the quasiparticle (QP) density in a superconducting qubit device, resulting in an increased rate of QPs tunneling across proximal Josephson junctions (JJs) and causing correlated errors. Mechanical vibrations, such as those induced by the pulse tube (PT) in a dry dilution refrigerator, are also a known source of correlated errors. We measure two types of errors in the same device, linking the first to ionizing radiation and the second to PT operation. We present a method for distinguishing these two types of errors by their temporal, spatial, and frequency domain features, enabling physically motivated error-mitigation strategies. We also present accelerometer data to study the correlation between PT-induced vibrations and the errors. We measure arrays of transmon qubits where the difference in superconducting gap across the JJ is less than the qubit energy, as well as those where the gap is greater than the qubit energy, which has been shown to mitigate radiation-induced errors. The rate of both types of errors is reduced in these latter devices, suggesting that gap engineering is also protective against PT-induced errors.

quant-ph↗

arXiv2026

Characterization of Radiation-Induced Errors in Superconducting Qubits Protected with Various Gap-Engineering Strategies

Impacts from high-energy particles cause correlated errors in superconducting qubits by increasing the quasiparticle density in the vicinity of the Josephson junctions (JJs). Such errors are particularly harmful as they cannot be easily remedied via conventional error correcting codes. Recent experiments reduced correlated errors by making the difference in superconducting gap energy across the JJ larger than the qubit transition energy. In this work, we assess gap engineering near the JJ ($\delta\Delta_{\mathrm{JJ}}$) and the capacitor/ground-plane ($\delta\Delta_{\mathrm{M1}}$) by exposing arrays of transmon qubits to two sources of radiation. For $\alpha$-particles from an $^{241}$Am source, we observe $T_1$ errors correlated in space and time, supporting a hypothesis that hadronic cosmic rays are a major contributor to the $10^{-10}$ error floor observed in Ref. 1. For electrons from a pulsed linear accelerator, we observe temporally correlated $T_1$ and $T_2$ errors, this measurement is insensitive to spatial correlations. We observe that the severity of correlated $T_1$ errors is reduced for qubit arrays with a greater degree of gap engineering at the JJ. For both $T_1$ and $T_2$ errors, the recovery time is hastened by an increased $\delta\Delta_{\mathrm{M1}}$, which we attribute to the trapping of quasiparticles into the capacitor/ground-plane. We construct a model of quasiparticle dynamics that qualitatively agrees with our observations. This work reinforces the multifaceted influence of radiation on superconducting qubits and provides strategies for improving radiation resilience.

quant-ph↗

arXiv2025

ZZ-Free Two-Transmon CZ Gate Mediated by a Fluxonium Coupler

Eliminating residual ZZ interactions in a two-qubit system is essential for reducing coherent errors during quantum operations. In a superconducting circuit platform, coupling two transmon qubits via a transmon coupler has been shown to effectively suppress residual ZZ interactions. However, in such systems, perfect cancellation usually requires the qubit-qubit detuning to be smaller than the individual qubit anharmonicities, which exacerbates frequency crowding and microwave crosstalk. To address this limitation, we introduce TFT (Transmon-Fluxonium-Transmon) architecture, wherein two transmon qubits are coupled via a fluxonium qubit. The coupling mediated by the fluxonium eliminates residual ZZ interactions even for transmons detuned larger than their anharmonicities. We experimentally identified zero-ZZ interaction points at qubit-qubit detunings of 409 MHz and 616 MHz from two distinct TFT devices. We then implemented an adiabatic, coupler-flux-biased controlled-Z gate on both devices, achieving CZ gate fidelities of 99.64(6)% and 99.68(8)%.

quant-ph↗

arXiv2025

Probing Sensitivity near a Quantum Exceptional Point using Waveguide Quantum Electrodynamics

Non-Hermitian Hamiltonians with complex eigenenergies are useful tools for describing the dynamics of open quantum systems. In particular, parity and time (PT) symmetric Hamiltonians have generated interest due to the emergence of exceptional-point degeneracies, where both eigenenergies and eigenvectors coalesce as the energy spectrum transitions from real- to complex-valued. Because of the abrupt spectral response near exceptional points, such systems have been proposed as candidates for precision quantum sensing. In this work, we emulate a passive PT dimer using a two-mode, non-Hermitian system of superconducting qubits comprising one high-coherence qubit coupled to an intentionally lossy qubit via a tunable coupler. The loss is introduced by strongly coupling the qubit to a continuum of photonic modes in an open waveguide environment. Using both pulsed and continuous-wave measurements, we characterize the system dynamics near the exceptional point. We observe a behavior broadly consistent with an ideal passive PT dimer with some corrections due to the tunable coupler element. We extract the complex eigenenergies associated with the two modes and calculate the sensitivity as a function of the coupling strength. Confirming theoretical predictions, we observe no sensitivity enhancement near the quantum exceptional point. This work elucidates the limitations of exceptional-point systems as candidates for quantum-enhanced sensing. We establish waveguide quantum electrodynamics as a versatile platform for exploring non-Hermitian quantum dynamics in superconducting circuits.

quant-ph↗

arXiv2025

Improving Transmon Qubit Performance with Fluorine-based Surface Treatments

Reducing materials and processing-induced decoherence is critical to the development of utility-scale quantum processors based on superconducting qubits. Here we report on the impact of two fluorine-based wet etches, which we use to treat the silicon surface underneath the Josephson junctions (JJs) of fixed-frequency transmon qubits made with aluminum base metallization. Using several materials analysis techniques, we demonstrate that these surface treatments can remove germanium residue introduced by our JJ fabrication with no other changes to the overall process flow. These surface treatments result in significantly improved energy relaxation times for the highest performing process, with median $T_1=334~\mu$s, corresponding to quality factor $Q=6.6\times10^6$. This result suggests that the metal-substrate interface directly underneath the JJs was a major contributor to microwave loss in these transmon qubit circuits prior to integration of these surface treatments. Furthermore, this work illustrates how materials analysis can be used in conjunction with quantum device performance metrics to improve performance in superconducting qubits.

quant-ph↗

arXiv2025

Temperature and Magnetic-Field Dependence of Energy Relaxation in a Fluxonium Qubit

Noise from material defects at device interfaces is known to limit the coherence of superconducting circuits, yet our understanding of the defect origins and noise mechanisms remains incomplete. Here we investigate the temperature and in-plane magnetic-field dependence of energy relaxation in a low-frequency fluxonium qubit, where the sensitivity to flux noise and charge noise arising from dielectric loss can be tuned by applied flux. We observe an approximately linear scaling of flux noise with temperature $T$ and a power-law dependence of dielectric loss $T^3$ up to 100 mK. Additionally, we find that the dielectric-loss-limited $T_1$ decreases with weak in-plane magnetic fields, suggesting a potential magnetic-field response of the underlying charge-coupled defects. We implement a multi-level decoherence model in our analysis, motivated by the widely tunable matrix elements and transition energies approaching the thermal energy scale in our system. These findings offer insight for fluxonium coherence modeling and should inform microscopic theories of intrinsic noise in superconducting circuits.

quant-ph↗

arXiv2025

High-Efficiency, Low-Loss Floquet-mode Traveling Wave Parametric Amplifier

Advancing fault-tolerant quantum computing and fundamental science necessitates quantum-limited amplifiers with near-ideal quantum efficiency and multiplexing capability. However, existing solutions typically achieve one at the expense of the other. In this work, we experimentally demonstrate the first Floquet-mode traveling-wave parametric amplifier (Floquet TWPA), which achieves nearly quantum-limited noise performance, minimal dissipation, and broadband operation, breaking the presumption that broadband amplifiers introduce higher noise. We achieve a system measurement efficiency of $65.1\pm5.8\%$ when measuring a superconducting qubit, which to our knowledge is the highest-reported in a superconducting qubit readout experiment utilizing phase-preserving amplifiers. Our device exhibits $>20$-dB amplification over a $3$-GHz instantaneous bandwidth, $<\!0.5\,$-dB average in-band insertion loss, and the highest reported intrinsic quantum efficiency for a TWPA of $92.1\pm7.6\%$, relative to an ideal phase-preserving amplifier. Fabricated in a superconducting qubit process, these general-purpose Floquet TWPAs are suitable for fast, high-fidelity multiplexed readout in large-scale quantum systems and future monolithic integration with quantum processors.

quant-ph↗

arXiv2024

Deterministic remote entanglement using a chiral quantum interconnect

Quantum interconnects facilitate entanglement distribution between non-local computational nodes. For superconducting processors, microwave photons are a natural means to mediate this distribution. However, many existing architectures limit node connectivity and directionality. In this work, we construct a chiral quantum interconnect between two nominally identical modules in separate microwave packages. We leverage quantum interference to emit and absorb microwave photons on demand and in a chosen direction between these modules. We optimize the protocol using model-free reinforcement learning to maximize absorption efficiency. By halting the emission process halfway through its duration, we generate remote entanglement between modules in the form of a four-qubit W state with 62.4 +/- 1.6% (leftward photon propagation) and 62.1 +/- 1.2% (rightward) fidelity, limited mainly by propagation loss. A chiral quantum network comprising many modules provides a platform for the exploration of novel many-body physics and quantum simulation. This quantum network architecture enables all-to-all connectivity between non-local processors for modular and extensible quantum computation.

quant-ph↗

arXiv2024

Interferometric Purcell suppression of spontaneous emission in a superconducting qubit

In superconducting qubits, suppression of spontaneous emission is essential to achieve fast dispersive measurement and reset without sacrificing qubit lifetime. We show that resonator-mediated decay of the qubit mode to the feedline can be suppressed using destructive interference, where the readout resonator is coupled to the feedline at two points. This "interferometric Purcell filter" does not require dedicated filter components or impedance mismatch in the feedline, making it suitable for applications such as all-pass readout. We design and fabricate a device with the proposed scheme and demonstrate suppression of resonator-mediated decay that exceeds 2 orders of magnitude over a bandwidth of 400 MHz for a resonator linewidth of 13.8 MHz.

quant-ph↗

arXiv2024

Near-ultrastrong nonlinear light-matter coupling in superconducting circuits

The interaction between an atom and an electromagnetic mode of a resonator is of both fundamental interest and is ubiquitous in quantum technologies. Most prior work studies a linear light-matter coupling of the form $g \widehat{\sigma}_x (\widehat{a} + \widehat{a}^\dagger)$, where $g$ measured relative to photonic ($\omega_a$) and atomic ($\omega_b$) mode frequencies can reach the ultrastrong regime ($g/\omega_{a}\!>\!10^{-1}$). In contrast, a nonlinear light-matter coupling of the form $\frac{\chi}{2} \widehat{\sigma}_z \widehat{a}^\dagger \widehat{a}$ has the advantage of commuting with the atomic $\widehat{\sigma}_z$ and photonic $\widehat{a}^\dagger\widehat{a}$ Hamiltonian, allowing for fundamental operations such as quantum-non-demolition measurement. However, due to the perturbative nature of nonlinear coupling, the state-of-the-art $\chi/\text{max}(\omega_a, \omega_b)$ is limited to $\!<\!10^{-2}$. Here, we use a superconducting circuit architecture featuring a quarton coupler to experimentally demonstrate, for the first time, a near-ultrastrong $\chi/\text{max}(\omega_a, \omega_b)= (4.852\pm0.006)\times10^{-2}$ nonlinear coupling of a superconducting artificial atom and a nearly-linear resonator. We also show signatures of light-light nonlinear coupling ($\chi\widehat{a}^\dagger\widehat{a}\widehat{b}^\dagger\widehat{b}$), and $\chi/2\pi = 580.3 \pm 0.4 $ MHz matter-matter nonlinear coupling ($\frac{\chi}{4}\widehat{\sigma}_{z,a}\widehat{\sigma}_{z,b}$) which represents the largest reported $ZZ$ interaction between two coherent qubits. Such advances in the nonlinear coupling strength of light, matter modes enable new physical regimes and could lead to applications such as orders of magnitude faster qubit readout and gates.

quant-ph↗

arXiv2024

Dephasing in Fluxonium Qubits from Coherent Quantum Phase Slips

Phase slips occur across all Josephson junctions (JJs) at a rate that increases with the impedance of the junction. In superconducting qubits composed of JJ-array superinductors -- such as fluxonium -- phase slips in the array can lead to decoherence. In particular, phase-slip processes at the individual array junctions can coherently interfere, each with an Aharonov--Casher phase that depends on the offset charges of the array islands. These coherent quantum phase slips (CQPS) perturbatively modify the qubit frequency, and therefore charge noise on the array islands will lead to dephasing. By varying the impedance of the array junctions, we design a set of fluxonium qubits in which the expected phase-slip rate within the JJ-array changes by several orders of magnitude. We characterize the coherence times of these qubits and demonstrate that the scaling of CQPS-induced dephasing rates agrees with our theoretical model. Furthermore, we perform noise spectroscopy of two qubits in regimes dominated by either CQPS or flux noise. We find the noise power spectrum associated with CQPS dephasing appears to be featureless at low frequencies and not $1/f$. Numerical simulations indicate this behavior is consistent with charge noise generated by charge-parity fluctuations within the array. Our findings broadly inform JJ-array-design tradeoffs, relevant for the numerous superconducting qubit designs employing JJ-array superinductors.

quant-ph↗

arXiv2024

Directional emission of a readout resonator for qubit measurement

We propose and demonstrate transmission-based dispersive readout of a superconducting qubit using an all-pass resonator, which preferentially emits readout photons toward the output. This is in contrast to typical readout schemes, which intentionally mismatch the feedline at one end so that the readout signal preferentially decays toward the output. We show that this intentional mismatch creates scaling challenges, including larger spread of effective resonator linewidths due to non-ideal impedance environments and added infrastructure for impedance matching. A future architecture using multiplexed all-pass readout resonators would avoid the need for intentional mismatch and potentially improve the scaling prospects of quantum computers. As a proof-of-concept demonstration of "all-pass readout," we design and fabricate an all-pass readout resonator that demonstrates insertion loss below 1.17 dB at the readout frequency and a maximum insertion loss of 1.53 dB across its full bandwidth for the lowest three states of a transmon qubit. We demonstrate qubit readout with an average single-shot fidelity of 98.1% in 600 ns; to assess the effect of larger dispersive shift, we implement a shelving protocol and achieve a fidelity of 99.0% in 300 ns.

quant-ph↗

arXiv2024

Synchronous Detection of Cosmic Rays and Correlated Errors in Superconducting Qubit Arrays

Quantum information processing at scale will require sufficiently stable and long-lived qubits, likely enabled by error-correction codes. Several recent superconducting-qubit experiments, however, reported observing intermittent spatiotemporally correlated errors that would be problematic for conventional codes, with ionizing radiation being a likely cause. Here, we directly measured the cosmic-ray contribution to spatiotemporally correlated qubit errors. We accomplished this by synchronously monitoring cosmic-ray detectors and qubit energy-relaxation dynamics of 10 transmon qubits distributed across a 5x5x0.35 mm$^3$ silicon chip. Cosmic rays caused correlated errors at a rate of 1/(10 min), accounting for 17$\pm$1% of all such events. Our qubits responded to essentially all of the cosmic rays and their secondary particles incident on the chip, consistent with the independently measured arrival flux. Moreover, we observed that the landscape of the superconducting gap in proximity to the Josephson junctions dramatically impacts the qubit response to cosmic rays. Given the practical difficulties associated with shielding cosmic rays, our results indicate the importance of radiation hardening -- for example, superconducting gap engineering -- to the realization of robust quantum error correction.

quant-ph↗