arXiv subjects

Harald Haas

Publications and source records attributed to Harald Haas.

At least 37 records · Page 2Linked to original sources

arXiv2025

Analytical Framework of Orbital Angular Momentum Beam under Misaligned Detection

This work presents an analytical framework for modeling a detected orbital angular momentum (OAM) spectrum of an optical beam subject to tilt and lateral displacement. Firstly, we demonstrate that both types of misalignment generate OAM sidebands governed by the same functional form, each characterized by a distinct dimensionless parameter that depends on the beam's size and wavelength. Secondly, our analysis reveals that increasing the beam's topological charge broadens the detected OAM spectrum. Lastly, we show that when both tilt and lateral displacement are present, the contribution of the original OAM mode can be tuned: specifically, by orienting the tilt and displacement in perpendicular directions, the resulting misalignment effects interfere destructively, thereby reducing crosstalk.

physics.optics↗

arXiv2025

BIA Transmission in Rate Splitting-based Optical Wireless Networks

Optical wireless communication (OWC) has recently received massive interest as a new technology that can support the enormous data traffic increasing on daily basis. In particular, laser-based OWC networks can provide terabits per second (Tbps) aggregate data rates. However, the emerging OWC networks require a high number of optical access points (APs), each AP corresponding to an optical cell, to provide uniform coverage for multiple users. Therefore, inter-cell interference (ICI) and multi-user interference (MUI) are crucial issues that must be managed efficiently to provide high spectral efficiency. In radio frequency (RF) networks, rate splitting (RS) is proposed as a transmission scheme to serve multiple users simultaneously following a certain strategy. It was shown that RS provides high data rates compared to orthogonal and non-orthogonal interference management schemes. Considering the high density of OWC networks, the application of RS within each optical cell might not be practical due to severe ICI. In this paper, a new strategy is derived referred to as blind interference alignment-rate splitting (BIA-RS) to fully coordinate the transmission among the optical APs, while determining the precoding matrices of multiple groups of users formed beforehand. Therefore, RS can be implemented within each group to manage MUI. The proposed BIA-RS scheme requires two layers of power allocation to achieve high performance. Given that, a max-min fractional optimization problem is formulated to optimally distribute the power budget among the groups and the messages intended to the users of each group. Finally, a power allocation algorithm is designed with multiple Lagrangian multipliers to provide practical and sub-optimal solutions. The results show the high performance of the proposed scheme compared to other counterpart schemes.

eess.SY↗

arXiv2025

A Novel Terabit Grid-of-Beam Optical Wireless Multi-User Access Network with Beam Clustering

In this paper, we put forward a proof of concept for sixth generation (6G) Terabit infrared (IR) laser-based indoor optical wireless networks. We propose a novel double-tier access point (AP) architecture based on an array of arrays of vertical cavity surface emitting lasers (VCSELs) to provide a seamless grid-of-beam coverage with multi-Gb/s per beam. We present systematic design and thorough analytical modeling of the AP architecture, which are then applied to downlink system modeling using non-imaging angle diversity receivers (ADRs). We propose static beam clustering with coordinated multi-beam joint transmission (CoMB-JT) for network interference management and devise various clustering strategies to address inter-beam interference (IBI) and inter-cluster interference (ICI). Non-orthogonal multiple access (NOMA) and orthogonal frequency division multiple access (OFDMA) schemes are also adopted to handle intra-cluster interference, and the resulting signal-to-interference-plus-noise ratio (SINR) and achievable data rate are derived. The network performance is studied in terms of spatial distributions and statistics of the downlink SINR and data rate through extensive computer simulations. The results demonstrate that data rates up to 15 Gb/s are achieved within the coverage area and a properly devised clustering strikes a balance between the sum rate and fairness depending on the number of users.

eess.SP↗

arXiv2025

A Comprehensive Comparison between Terahertz and Optical Wireless Communications

This paper presents a comprehensive quantitative comparison between Terahertz (THz) communication (TeraCom) and optical wireless communication (OWC) technologies, focusing on both indoor and outdoor environments. We propose a comparison method for TeraCom and vertical-cavity surface-emitting laser (VCSEL)-based OWC in indoor scenarios, incorporating misalignment effects by modeling the THz antenna radiation pattern within a multi-ray THz channel model and using a Gaussian beam model for VCSEL-based OWC. Unified beamwidth parameters allow for a detailed analysis of misalignment impact on both systems. Furthermore, we develop power consumption models for each technology, integrating key parameters such as THz phase noise, VCSEL non-linearities, and photodetector bandwidth-area tradeoffs. These models enable an in-depth analysis of energy efficiency in indoor environments, including multi-transmitter coverage scenarios. For outdoor scenarios, we summarize existing stochastic channel models addressing path loss, pointing errors, and small-scale fading for free space optics (FSO) and THz links. We then apply these models to unmanned aerial vehicle (UAV) applications to assess performance in dynamic conditions. Our results provide critical insights into the suitability of each technology for various deployment scenarios.

eess.SP↗

arXiv2025

Efficient Service Differentiation and Energy Management in Hybrid WiFi/LiFi Networks

In this paper, we propose an innovative predict-and-optimize algorithm designed for hybrid WiFi/LiFi networks, aiming to achieve service differentiation while maximizing energy efficiency (EE). The proposed framework utilizes multi-access technology real-time intelligent controller (mATRIC) to dynamically predict the appropriate network slice for each user based on historically monitored key performance indicators (KPIs). This prediction is facilitated by a deep learning model trained using the resilient backpropagation algorithm, with training conducted on KPIs data at the universal non-real time RAN intelligent controller (non-RT RIC). This trained model enables real-time slice selection by mATRIC. In the subsequent phase, the algorithm focuses on optimizing EE of hybrid network as a function of precoding vectors for the predicted slices by employing techniques from sequential convex approximation and the inner approximation method. We introduce novel approximations to convert non-convex objective functions and constraints into convex forms, and develop an iterative algorithm to achieve sub-optimal solutions. Additionally, the EE maximization problem, ensures alignment with end-to-end latency requirements. It also addresses the various constraints inherent to hybrid systems, such as input signal limitations for LiFi LEDs, data rate restrictions, and power budget considerations. Simulation results validate the effectiveness of the proposed algorithm, demonstrating significant improvements in EE while ensuring service differentiation within hybrid network environments.

math.OC↗

arXiv2025

Optical RIS-enabled Multiple Access Communications

In this paper, we identify optical reconfigurable intelligent surfaces (ORISs) as key enablers of next-generation free-space optical (FSO) multiple access systems. By leveraging their beam steering and beam splitting capabilities, ORISs are able to effectively address line-of-sight (LoS) constraints, while enabling multi-user connectivity. We consider an ORIS-assisted non-orthogonal multiple access (NOMA) system model consisting of a single transmitter (Tx) and two receivers (Rxs). We derive novel analytical expressions to characterize the statistical particularities of the Tx-ORIS-Rx communication channel. Building upon the aforementioned expressions, we investigate the outage performance of the Rxs by deriving exact analytical expressions for the outage probability (OP) of each Rx. To provide deeper insights into the impact of various system parameters and physical conditions on the outage performance of each Rx, we conduct a high signal-to-noise ratio (SNR) analysis, that returns asymptotic expressions for the Rxs OPs at the high-SNR regime. Monte Carlo simulations validate the analysis, demonstrate the effectiveness of ORIS-enabled NOMA under a variety of configurations and physical scenarios, and showcase its superiority over its orthogonal-based counterpart.

eess.SP↗

arXiv2025

Holographic Metasurface-Based Beamforming for Multi-Altitude LEO Satellite Networks

Low Earth Orbit (LEO) satellite networks are capable of improving the global Internet service coverage. In this context, we propose a hybrid beamforming design for holographic metasurface based terrestrial users in multi-altitude LEO satellite networks. Firstly, the holographic beamformer is optimized by maximizing the downlink channel gain from the serving satellite to the terrestrial user. Then, the digital beamformer is designed by conceiving a minimum mean square error (MMSE) based detection algorithm for mitigating the interference arriving from other satellites. To dispense with excessive overhead of full channel state information (CSI) acquisition of all satellites, we propose a low-complexity MMSE beamforming algorithm that only relies on the distribution of the LEO satellite constellation harnessing stochastic geometry, which can achieve comparable throughput to that of the algorithm based on the full CSI in the case of a dense LEO satellite deployment. Furthermore, it outperforms the maximum ratio combining (MRC) algorithm, thanks to its inter-satellite interference mitigation capacity. The simulation results show that our proposed holographic metasurface based hybrid beamforming architecture is capable of outperforming the state-of-the-art antenna array architecture in terms of its throughput, given the same physical size of the transceivers. Moreover, we demonstrate that the beamforming performance attained can be substantially improved by taking into account the mutual coupling effect, imposed by the dense placement of the holographic metasurface elements.

cs.IT↗

arXiv2024

CubeSat-Enabled Free-Space Optics: Joint Data Communication and Fine Beam Tracking

The integration of CubeSats with Free Space Optical (FSO) links accelerates a major advancement in high-throughput, low-Earth orbit communication systems. However, CubeSats face challenges such as size, weight, and power (SWaP) limitations, as well as vibrations that cause fluctuations in the angle-of-arrival (AoA) of the optical beam at the receiver. These practical challenges make establishing CubeSat-assisted FSO links complicated. To mitigate AoA fluctuations, we expand the receiver's field of view and track the location of the focused beam spot using an array of avalanche photodiodes at the receiver. Initially, we model the optical channel between the transmitter and the detector array. Furthermore, to reduce the computational load of maximum likelihood sequence detection, which is infeasible for CubeSats due to SWaP constraints, we propose a sub-optimal blind sequence data detection approach that relies on the generalized likelihood ratio test (GLRT) criterion. We also utilize combining methods such as equal gain combining (EGC) and maximal ratio combining (MRC) for data detection, benchmarking their performance against the GLRT-based method. Numerical results demonstrate that the proposed low-complexity GLRT-based method outperforms the combining methods, achieving performance close to that of the ideal receiver.

eess.SP↗

arXiv2024

Interference Mitigation using Optimized Angle Diversity Receiver in LiFi Cellular Network

Light-fidelity (LiFi) is an emerging technology for high-speed short-range mobile communications. Inter-cell interference (ICI) is an important issue that limits the system performance in an optical attocell network. Angle diversity receivers (ADRs) have been proposed to mitigate ICI. In this paper, the structure of pyramid receivers (PRs) and truncated pyramid receivers (TPRs) are studied. The coverage problems of PRs and TPRs are defined and investigated, and the lower bound of field of view (FOV) for each PD is given analytically. The impact of random device orientation and diffuse link signal propagation are taken into consideration. The performances of PRs and TPRs are compared and then optimized ADR structures are proposed. The performance comparison between the select best combining (SBC) and maximum ratio combining (MRC) is given under different noise levels. It is shown that SBC will outperform MRC in an interference limited system, otherwise, MRC is a preferred scheme. In addition, the double source system, where each LiFi AP consists of two sources transmitting the same information signals but with opposite polarity, is proved to outperform the single source (SS) system under certain conditions.

cs.IT↗

arXiv2024

100 Gbps Indoor Access and 4.8 Gbps Outdoor Point-to-Point LiFi Transmission Systems using Laser-based Light Sources

In this paper, we demonstrate the communication capabilities of light-fidelity (LiFi) systems based on highbrightness and high-bandwidth integrated laser-based sources in a surface mount device (SMD) packaging platform. The laserbased source is able to deliver 450 lumens of white light illumination and the resultant light brightness is over 1000 cd mm2. It is demonstrated that a wavelength division multiplexing (WDM) LiFi system with ten parallel channels is able to deliver over 100 Gbps data rate with the assistance of Volterra filter-based nonlinear equalisers. In addition, an aggregated transmission data rate of 4.8 Gbps has been achieved over a link distance of 500 m with the same type of SMD light source. This work demonstrates the scalability of LiFi systems that employ laserbased light sources, particularly in their capacity to enable highspeed short range, as well as long-range data transmission.

eess.SY↗

arXiv2023

Single-Photon Counting Receivers for Optical Wireless Communications in Future 6G Networks

Optical wireless communication (OWC) offers several complementary advantages to radio-frequency wireless networks such as its massive available spectrum; hence, it is widely anticipated that OWC will assume a pivotal role in the forthcoming sixth generation wireless communication networks. Although significant progress has been achieved in OWC over the past decades, the outage induced by occasionally low received optical power continues to pose a key limiting factor for its deployment. In this work, we discuss the potential role of single-photon counting (SPC) receivers as a promising solution to overcome this limitation. We present an overview of the applications of SPC-based OWC systems in 6G networks, introduce their major performance-limiting factors, propose a performance enhancement framework to tackle these issues, and identify critical areas of open problems for future research.

cs.IT↗

arXiv2023

Optical Wireless Communications Using Intelligent Walls

This chapter is devoted to discussing the integration of intelligent reflecting surfaces (IRSs), or intelligent walls, in optical wireless communication (OWC) systems. IRS technology is a revolutionary concept that enables communication systems to harness the surrounding environment to control the propagation of light signals. Based on this, specific key performance indicators could be achieved by altering the electromagnetic response of the IRSs. In the following, we discuss the background theory and applications of IRSs and present a case study for an IRS-assisted indoor light-fidelity (LiFi) system. We then highlight some of the challenges related to this emerging concept and elaborate on future research directions.

eess.SP↗

arXiv2023

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed.

eess.SP↗

arXiv2022

Design and Optimisation of High-Speed Receivers for 6G Optical Wireless Networks

To achieve multi-Gb/s data rates in 6G optical wireless access networks based on narrow infrared (IR) laser beams, a high-speed receiver with two key specifications is needed: a sufficiently large aperture to collect the required optical power and a wide field of view (FOV) to avoid strict alignment issues. This paper puts forward the systematic design and optimisation of multi-tier non-imaging angle diversity receivers (ADRs) composed of compound parabolic concentrators (CPCs) coupled with photodiode (PD) arrays for laser-based optical wireless communication (OWC) links. Design tradeoffs include the gain-FOV tradeoff for each receiver element and the area-bandwidth tradeoff for each PD array. The rate maximisation is formulated as a non-convex optimisation problem under the constraints on the minimum required FOV and the overall ADR dimensions to find optimum configuration of the receiver bandwidth and FOV, and a low-complexity optimal solution is proposed. The ADR performance is studied using computer simulations and insightful design guidelines are provided through various numerical examples. An efficient technique is also proposed to reduce the ADR dimensions based on CPC length truncation. It is shown that a compact ADR with a height of $\leq0.5$ cm and an effective area of $\leq0.5$ cm$^2$ reaches a data rate of $12$ Gb/s with a half-angle FOV of $30^\circ$ over a $3$ m link distance.

cs.IT↗

arXiv2022

Intelligent Reflecting Surfaces for Enhanced Physical Layer Security in NOMA VLC Systems

The rise of intelligent reflecting surfaces (IRSs) is opening the door for unprecedented capabilities in visible light communication (VLC) systems. By controlling light propagation in indoor environments, it is possible to manipulate the channel conditions to achieve specific key performance indicators. In this paper, we investigate the role that IRSs can play in boosting the secrecy capacity of non-orthogonal multiple access (NOMA) VLC systems. More specifically, we propose an IRS-based physical layer security (PLS) mechanism that mitigates the information leakage risk inherent in NOMA. Our results demonstrate that the achieved secrecy capacity can be enhanced by up to 105% for a number of 80 IRS elements. To the best of our knowledge, this is the first paper that examines the PLS of NOMA-based IRS-assisted VLC systems.

cs.IT↗

arXiv2022

SPAD-Based Optical Wireless Communication with ACO-OFDM

The sensitivity of the optical wireless communication (OWC) can be effectively improved by employing the highly sensitive single-photon avalanche diode (SPAD) arrays. However, the nonlinear distortion introduced by the dead time strongly limits the throughput of the SPAD-based OWC systems. Optical orthogonal frequency division multiplexing (OFDM) can be employed in the systems with SPAD arrays to improve the spectral efficiency. In this work, a theoretical performance analysis of SPAD-based OWC system with asymmetrically-clipped optical OFDM (ACO-OFDM) is presented. The impact of the SPAD nonlinearity on the system performance is investigated. In addition, the comparison of the considered scheme with direct-current-biased optical OFDM (DCO-OFDM) is presented showing the distinct reliable operation regimes of the two schemes. In the low power regimes, ACO-OFDM outperforms DCO-OFDM; whereas, the latter is more preferable in the high power regimes.

cs.IT↗

arXiv2022

Spatial and Wavelength Division Joint Multiplexing System Design for Visible Light Communications

The low-pass characteristics of front-end elements including light-emitting diodes (LEDs) and photodiodes (PDs) limit the transmission data rate of visible light communication (VLC) and Light Fidelity (LiFi) systems. Using multiplexing transmission techniques, such as spatial multiplexing (SMX) and wavelength division multiplexing (WDM), is a solution to overcome bandwidth limitation. However, spatial correlation in optical wireless channels and optical filter bandpass shifts typically limit the achievable multiplexing gain in SMX and WDM systems, respectively. In this paper, we consider a multiple-input multiple output (MIMO) joint multiplexing VLC system that exploits available degrees-offreedom (DoFs) across space, wavelength and frequency dimensions simultaneously. Instead of providing a new precoder/post-detector design, we investigate the considered joint multiplexing system from a system configuration perspective by tuning system parameters in both spatial and wavelength domains, such as LED positions and optical filter passband. We propose a novel spatial clustering with wavelength division (SCWD) strategy which enhances the MIMO channel condition. We propose to use a state-of-the-art black-box optimization tool: Bayesian adaptive direct search (BADS) to determine the desired system parameters, which can significantly improve the achievable rate. The extensive numerical results demonstrate the superiority of the proposed method over conventional SMX and WDM VLC systems.

eess.SP↗

arXiv2022

Multi-User Rate Splitting in Optical Wireless Networks

Optical wireless communication (OWC) has recently received massive interest as a new technology that can support the enormous data traffic increasing on daily basis. Laser-based OWC networks can provide terabits per second (Tbps) aggregate data rates. However, the emerging OWC networks require clusters of optical transmitters to provide uniform coverage for multiple users. In this context, multi-user interference (MUI) is a crucial issue that must be managed efficiently to provide high spectral efficiency. Rate splitting (RS) is proposed as a transmission scheme to serve multiple users simultaneously by splitting the message of a given user into common and private messages, and then, each user decodes the desired message following a certain procedure. In radio frequency (RF) networks, RS provides higher spectral efficiency compared with orthogonal and non-orthogonal transmission schemes. Considering the high density of OWC networks, the performance of RS is limited by the cost of providing channel state information (CSI) at transmitters and by the noise resulting from interference cancellation. In this work, a user-grouping algorithm is proposed and used to form multiple groups, each group contains users spatially clustered. Then, an outer precoder is designed to manage inter-group interference following the methodology of blind interference alignment (BIA), which reduces the requirements of CSI at RF or optical transmitters. For intra-group interference, RS is applied within each group where the users belonging to a given group receive a unique common message on which their private messages are superimposed. Furthermore, an optimization problem is formulated to allocate the power among the private messages intended to all users such that the sum rate of the network is maximized.

eess.SP↗