arXiv subjects

Hem C. Kandpal

Publications and source records attributed to Hem C. Kandpal.

At least 19 recordsLinked to original sources

arXiv2026

Pressure-driven structural phase transition unlocks multifunctionality in KMgX (X = P, As, Sb, and Bi) compounds: A first-principles study

The search for materials with multifunctional properties has attracted significant attention due to their potential applications in various energy-related devices. Pressure-induced phase transitions provide an effective strategy for accessing different structural phases of a material without altering its chemical composition, thereby enabling the tuning of its physical properties and expanding its functional applications. In this work, we investigate the previously unexplored orthorhombic (Pnma) phase of the KMgX (X = P, As, Sb, and Bi) family using first-principles calculations and identify a pressure-induced structural transition from a tetragonal to orthorhombic phase. Stability of the pressure-accessible orthorhombic structure is rigorously confirmed by equation of state analysis together with phonon, elastic, and formation-enthalpy calculations, establishing its viability for further investigation. Optical properties calculated within the $G_0W_0$-Bethe-Salpeter equation (BSE) framework, incorporating quasiparticle corrections and excitonic effects, exhibit direct dipole-allowed transitions at the $Γ$ point and strong visible-light absorption with coefficients approaching $10^5~\text{cm}^{-1}$. Consequently, KMgAs and KMgSb achieve spectroscopic limited maximum efficiencies (SLME) of $27.12\%$ and $26.40\%$, respectively, at a thin-film thickness of $0.6~μ\text{m}$. Furthermore, thermoelectric transport calculations predict (zT) values of 0.65 and 0.58 at $900~\text{K}$ for p-type and n-type KMgSb, respectively, demonstrating its potential for both legs of thermoelectric devices. These values are likely conservative, as the Slack model tends to overestimate thermal conductivity. Overall, the pressure-accessible orthorhombic phase of the KMgX family emerges as a stable multifunctional semiconductor with coupled photovoltaic and thermoelectric energy-conversion capabilities.

cond-mat.mtrl-sci↗

arXiv2025

Electronic structure and hinge states of strained half-Heusler compounds LiSbZn and LiBiZn

Half-Heusler compounds are a class of materials with great potential for the study of distinct electronic states. In this work, we investigate, from first-principles, the possibility of hinge modes in closely related topological phases that are tunable by moderate uni-axial strain. We consider two compounds: LiSbZn and LiBiZn. While LiSbZn has a topologically trivial band structure, the larger spin-orbit coupling of Bi causes a band inversion in LiBiZn. We predict the existence of topologically trivial hinge states in both cases. The hinge modes are affected by both the crystal termination, and the bulk topological phase transitions, albeit indirectly: When present, topological surface modes hybridize with the hinge states and obscure their visibility. Thus, we find that the most visible hinge modes occur when no band inversions are present in the material. Our work highlights the interplay and competition between surface and hinge modes in half-Heuslers, and may help guide the experimental search for robust boundary signatures in these materials.

cond-mat.mtrl-sci↗

arXiv2024

Half Heusler alloy CoVSn as self-supported electrocatalyst for hydrogen evolution reaction

Despite significant advancements in electrocatalysis for clean hydrogen fuel generation, the transition from concept to commercialization faces challenges due to the instability of electrocatalysts. This study delves into the exploration of a structurally and mechanically robust half-Heusler alloy, CoVSn, as an efficient electrocatalyst for hydrogen production. The synthesis of CoVSn was achieved using the arc-melting technique and optimized successfully into a cubic structure - a previously unattained and highly challenging feat. The resulting electrode, cut from the obtained CoVSn pellet, served as a self-supported electrocatalyst and initially generates a current density of 10 mA cm-2 at an overpotential of 244 mV. Remarkably, this overpotential decreased uniquely over time, reaches 202 mV after a durability testing of 12 hours, while maintaining its crystal structure integrity after the electrocatalysis process. This progressive enhancement in catalytic activity and structural stability underscores the significance of this research. The synergistic effect between Co and V atoms as pivotal active centers for hydrogen generation was evident, further enhanced by formation of high valance metal sites Co2O3 and V2O3 during the hydrogen evolution reaction. In essence, this study confirms the stability and promise of CoVSn in hydrogen generation, paving the way for exploring additional self-supported ternary intermetallics to enhance water-splitting efficiency.

physics.chem-ph↗

arXiv2023

Transport and electrical properties of cryogenic thermoelectric FeSb2: the effect of isoelectronic and hole doping

Thermoelectric materials operating at cryogenic temperatures are in high demand for efficient cooling and power generation in applications ranging from superconductors to quantum computing. The narrow band-gap semiconductor FeSb2, known for its colossal Seebeck coefficient, holds promise for such applications, provided its thermal conductivity value can be reduced. This study investigates the impact of isoelectronic substitution (Bi) and hole doping (Pb) at the Sb site on the transport properties of FeSb2, with a particular focus on thermal conductivity (\k{appa}). Polycrystalline FeSb2 powder, along with Bi- and Pb-doped samples, were synthesized using a simple co-precipitation approach, followed by thermal treatment in an H2 atmosphere. XRD and SEM analysis confirms the formation of the desired phase pre- and post-consolidation using spark plasma sintering (SPS). The consolidation process resulted in a high compaction density and the formation of submicrometer-sized grains, as substantiated by electron backscattered diffraction (EBSD) analysis. Substituting 1% of Bi and Pb at the Sb site successfully suppressed the thermal conductivity (\k{appa}) from ~15 W/m-K in pure FeSb2 to ~10 and ~8.7 W/m-K, respectively. Importantly, resistivity measurements revealed a metal-to-insulator transition at around 6.5 K in undoped FeSb2 and isoelectronically Bi-substituted FeSb2, suggesting the existence of metallic surface states and provides valuable evidence for the perplexing topological behavior exhibited by FeSb2.

cond-mat.mtrl-sci↗

arXiv2023

Effect of hydrostatic pressure and alloying on thermoelectric properties of van der Waals solid KMgSb: An \textit{ab-initio} study

Through a combined first-principles and Boltzmann transport theory, we systematically investigate the thermal and electrical transport properties of the unexplored ternary quasi two-dimensional KMgSb system of KMgX (X = P, As, Sb, and Bi) family. Herein, the transport properties of KMgSb under the application of hydrostatic pressure and alloy engineering are reported. At a carrier concentration of $\sim8\times10^{19}~\mathrm{cm^{-3}}$, the figure of merit zT ($\sim0.75$) for both the $n$-type and $p$-type of KMgSb closely matched, making it an attractive option for engineering both legs of a thermoelectric device using the same material. This is particularly desirable for high-performance thermoelectric applications. Furthermore, the zT value increases as pressure decreases, further enhancing its potential for use in thermoelectric devices. In the case of substitutional doping (replacing 50 \% Sb by Bi atom), we observed $\sim49~\%$ (in-plane) increase in the peak thermoelectric figure of merit (zT). The maximum zT value obtained after alloy engineering is $\sim1.45$ at 900~K temperature. Hydrostatic pressure is observed to be a great tool to tune the lattice thermal conductivity ($κ_L$). We observed that the negative pressure-like effects could be achieved by chemically doping bigger-size atoms, especially when $κ_L$ is a property under investigation. Through our computational investigation, we explain that hydrostatic pressure and alloy engineering may improve thermoelectric performance dramatically.

cond-mat.mtrl-sci↗

arXiv2023

Spin and current transport in the robust half-metallic magnet $c$-CoFeGe

Spintronics is an emerging form of electronics based on the electrons' spin degree of freedom for which materials with robust half-metallic ferromagnet (HMF) character are very attractive. Here we determine the structural stability, electronic, magnetic, and mechanical properties of the half-Heusler (hH) compound CoFeGe, in particular also in its cubic form. The first-principles calculations suggest that the electronic structure is robust with 100 \% spin polarization at the Fermi level under hydrostatic pressure and uni-axial strain. Both the longitudinal and Hall current polarization are calculated and the longitudinal current polarization ($P_{L}$) is found to be $>99\%$ and extremely robust under uniform pressure and uni-axial strain. The anomalous Hall conductivity (AHC) and Spin Hall conductivity (SHC) of hH cubic CoFeGe (\textit{c}-CoFeGe) are found to be $\sim -100$ S/cm and $\sim 39~\hbar/e$ S/cm, respectively. Moreover, the Curie temperature of the alloy is calculated to be $\sim$524 K with a 3 $μ_{B}$ magnetic moment. Lastly, the calculated mechanical properties indicate that \textit{c}-CoFeGe is ductile and mechanically stable with a bulk modulus of $\approx$ 154 GPa. Overall, this analysis reveals that cubic CoFeGe is a robust half-metallic ferromagnet and an interesting material for spintronic applications.

cond-mat.mtrl-sci↗

arXiv2019

\textit{Ab initio} study of Bi-based half Heusler alloys as potential thermoelectric prospects

We investigated six heavy element bismuth-based 18-VEC half-Heusler alloys CoTiBi, CoZrBi, CoHfBi, FeVBi, FeNbBi, and FeTaBi by first principles approach, in search of better thermoelectric prospects. The motivation is driven by expected lower thermal conductivity and the recent discovery of CoZrBi-based materials. Significantly, our calculated power factor values of all the systems show an increment of $\sim$40\% in comparison to the reported \textit{p}-type CoTiSb. We propose that doping at Bi-site, on account of electronic features, will be helpful in achieving the proposed power factor values. Interestingly, the thermal conductivity of CoTiBi and CoZrBi was found to be lower and that of CoHfBi was almost parallel, in comparison to the reported CoTiSb. We also provide conservative estimates of the figure of merit, exceeding the reported CoTiSb and comparable to FeNbSb. Overall, our results suggest potential new candidates of bismuth-based ternary compounds for high thermoelectric performance.

cond-mat.mtrl-sci↗

arXiv2019

First-principles investigations of orthorhombic-cubic phase transition and its effect on thermoelectric properties in cobalt-based ternary alloys

We screened six cobalt-based 18-VEC systems CoVSi, CoNbSi, CoTaSi (Si-group) and CoVGe, CoNbGe, CoTaGe (Ge-group) by the first-principles approach, with the motivation of stabilizing these orthorhombic phases into the cubic symmetry -- favorable for thermoelectrics. Remarkably, it was found that the Ge-group is energetically more favorable in the cubic symmetry than the hitherto orthorhombic phase. We account the cubic ground state of the Si-group to the interplay of internal pressure and covalent interactions. The principle of covalent interactions will provide an insight and could be vital in speeding the search of missing cubic half-Heusler alloys. Meanwhile, the calculated transport properties of all the systems on \textit{p}-type doping, except CoVSi, are more promising than the well-known CoTiSb. We also provide conservative estimates of the figure of merit, exceeding the CoTiSb. Based on our findings, we suggest possible new phases of ternary compounds for thermoelectric applications.

cond-mat.mtrl-sci↗

arXiv2018

Polytypism at its best: improved thermoelectric performance in Li based Nowotony-Juza phases

In principle thermoelectricity is a viable route of converting waste heat into electricity, but the commercialization of the technology is limited by its present efficiency. In quest of improved materials, utilizing an \textit{ab initio} approach, we report polytypism induced improved thermoelectric performance in Li based Nowotny-Juza phases LiZn\textit{X} (\textit{X} = N, P, As, Sb, and Bi). In addition to LiZnSb, we find that cubic LiZnBi is energetically more favorable than the hitherto explored hexagonal phase whereas the hexagonal polytypes of cubic LiZnP, and LiZnAs are likely to be stabilized by pressure -- hydrostatic pressure can be aided by internal pressure to facilitate the phase transition. We find a pronounced impact of the polytypism on thermoelectric properties. We determine conservative estimates of the figure of merit and find that while power factor and figure of merit values are improved in hexagonal phases, the values in cubic phases are still excellent. The \textit{ZT} values of cubic and hexagonal LiZnSb at 700 K are 1.27 and 1.95, respectively. Other promising \textit{ZT} values at 700 K are 1.96 and 1.49 of hexagonal LiZnP and LiZnAs, respectively, for \textit{n}-type doping. Overall, our findings proffers that the Nowotny-Juza phases are a new potential class of thermoelectric materials.

cond-mat.mtrl-sci↗

arXiv2018

FeTaSb and FeMnTiSb as promising thermoelectric materials: An ab initio approach

Thermoelectricity in principle provides a pathway to put waste heat to good use. Motivated by this we investigate thermal and electrical transport properties of two new Fe-based Heusler alloys, FeTaSb and FeMnTiSb, by a first principles approach and semiclassical Boltzmann transport theory within the constant relaxation-time approximation. We find a high power factor of \textit{p}-doped FeTaSb, competitive with best performing Heusler alloy FeNbSb at 1100 K. The obtained power factor of \textit{n}-doped FeMnTiSb at room temperature is higher than that of both FeNbSb and FeTaSb. Remarkably, FeMnTiSb can be used for both \textit{n}-type and \textit{p}-type legs in a thermoelectric module. The Seebeck coefficients of the two proposed systems are in line with those of earlier reported Heusler alloys. We also provide conservative estimates of the figure of merit for the two systems. Overall, our findings suggest a high temperature thermoelectric potential of FeTaSb while the low cost FeMnTiSb is a viable room temperature thermoelectric candidate material.

cond-mat.mtrl-sci↗

arXiv2017

Hole-doped cobalt-based Heusler phases as prospective high-performance high-temperature thermoelectrics

Materials design based on first-principles electronic calculations has proven a fruitful strategy to identify new thermoelectric materials with a favorable figure of merit. Recent electronic structure calculations predict that in cobalt-based half-Heusler systems a power factor higher than in CoTiSb can be achieved upon p-type doping of CoVSn, CoNbSn, CoTaSn, CoMoIn, and CoWIn. Here, using a first-principles approach and semi-classical Boltzmann transport theory, we investigate the electrical and thermal transport properties of these materials. The calculated thermal conductivity at room temperature of all the systems is lower than that of CoTiSb, with CoMoIn and CoWIn having an almost 3-fold lower thermal conductivity than CoTiSb. We also provide conservative estimates of the figure of merit for these systems which all turn out to be higher than in CoTiSb and to have a maximum value for CoWIn.

cond-mat.mtrl-sci↗

arXiv2017

Ab-initio design of new Heusler materials for thermoelectric applications

In search of new prospects for thermoelectric materials, using ab-initio calculations and semi-classical Boltzmann theory, we have systematically investigated the electronic structure and transport properties of 18-valence electron count cobalt based half-Heusler alloys with prime focus on CoVSn, CoNbSn, CoTaSn, CoMoIn, and CoWIn. The effect of doping on transport properties has been studied under the rigid band approximation. The maximum power factor, S$^2σ$, for all systems is obtained on hole doping and is comparable to the existing thermoelectric material CoTiSb. The stability of all the systems is verified by phonon calculations. Based on our calculations, we suggest that CoVSn, CoNbSn, CoTaSn, CoMoIn and CoWIn could be potential candidates for high temperature thermoelectric materials.

physics.comp-ph↗

arXiv2012

Highly anisotropic magnetic states of Co dimers bound to graphene-vacancies

The adsorption behavior and the magnetic states of cobalt atoms and dimers on single vacancies in a graphene sheet are investigated by means of relativistic density functional calculations. It is found that local magnetic moments are formed in both cases, despite strong chemical binding. Of particular interest are kinetically stable isomers with two cobalt atoms attached to the same side of the graphene sheet. Magnetic bi-stability with an anisotropy barrier of about 50 meV is possible in this geometry. The feasibility of its preparation is discussed.

cond-mat.mtrl-sci↗

arXiv2011

Calculation of magnetic exchange couplings in S=3/2 honeycomb system Bi$_3$Mn$_4$O$_{12}$(NO$_3$)} from first principles

Absence of magnetic ordering in Bi$_3$Mn$_4$O$_{12}$(NO$_3$), (BMNO) which has a magnetic subsystem that consists of honeycomb bi-layers of Mn$^{4+}$ ions with spin S=3/2, has raised the expectation that its ground state is strongly frustrated due to longer-range antiferromagnetic interactions. We calculate the magnetic exchange coupling constants of the BMNO complex within a density functional approach and find that the dominating interactions between Mn spins are the antiferromagnetic nearest-neighbor $J_1$ and interlayer interaction $J_c$. The largest interaction is $J_c$, which substantially exceeds $J_1$. Longer-range interactions are antiferromagnetic, but only weakly frustrating.

cond-mat.mtrl-sci↗

arXiv2009

Microscopic origin of pressure-induced phase transitions in iron-pnictide $AFe_2As_2$ superconductors: an {ab initio} molecular-dynamics study

Using {\it ab initio} molecular dynamics we investigate the electronic and lattice structure of $A$Fe$_2$As$_2$ ($A$=Ca, Sr, Ba) under pressure. We find that the structural phase transition (orthorhombic to tetragonal symmetry) is always accompanied by a magnetic phase transition in all the compounds, while the nature of the transitions is different for the three systems. Our calculations explain the origin of the existence of a collapsed tetragonal phase in CaFe$_2$As$_2$ and its absence in BaFe$_2$As$_2$. We argue that changes of the Fermi surface nesting features dominate the phase transition under pressure rather than spin frustration or a Kondo scenario. The consequences for superconductivity are discussed.

cond-mat.supr-con↗

arXiv2009

First principles determination of the model parameters in $κ$-(ET)$_2$Cu$_2$(CN)$_3$

We present a detailed study of the derivation of the Hubbard model parameters for $κ$-(ET)$_2$Cu$_2$(CN)$_3$ in the framework of {\it ab initio} Density Functional Theory. We show that calculations with different (i) wavefunction basis, (ii) exchange correlation functionals and (iii) tight-binding models provide a reliable benchmark for the parameter values. We compare our results with available extended Hückel molecular orbital calculations and discuss its implications for the description of the properties of $κ$-(ET)$_2$Cu$_2$(CN)$_3$. The electronic properties of $κ$-(ET)$_2$Cu(SCN)$_2$ are also briefly discussed.

cond-mat.str-el↗

arXiv2009

Revision of model parameters for kappa-type charge transfer salts: an ab initio study

Intense experimental and theoretical studies have demonstrated that the anisotropic triangular lattice as realized in the kappa-(BEDT-TTF)2X family of organic charge transfer (CT) salts yields a complex phase diagram with magnetic, superconducting, Mott insulating and even spin liquid phases. With extensive density functional theory (DFT) calculations we refresh the link between manybody theory and experiment by determining hopping parameters of the underlying Hubbard model. This leads us to revise the widely used semiempirical parameters in the direction of less frustrated, more anisotropic triangular lattices. The implications of these results on the systems' description are discussed.

cond-mat.str-el↗

arXiv2006

Calculated electronic and magnetic properties of the half-metallic, transition metal based Heusler compounds

In this work, results of {\it ab-initio} band structure calculations for $A_2BC$ Heusler compounds that have $A$ and $B$ sites occupied by transition metals and $C$ by a main group element are presented. This class of materials includes some interesting half-metallic and ferromagnetic properties. The calculations have been performed in order to understand the properties of the minority band gap and the peculiar magnetic behavior found in these materials. Among the interesting aspects of the electronic structure of the materials are the contributions from both $A$ and $B$ atoms to states near the Fermi energy and to the total magnetic moment. The magnitude of the total magnetic moment, which depends as well on the kind of $C$ atoms, shows a trend consistent with the Slater-Pauling type behavior in several classes of these compounds. The localized moment in these magnetic compounds resides at the $B$ site. Other than in the classical Cu$_2$-based Heusler compounds, the $A$ atoms in Co$_2$, Fe$_2$, and Mn$_2$ based compounds may contribute pronounced to the total magnetic moment.

cond-mat.mtrl-sci↗