arXiv subjects

Henk Wymeersch

Publications and source records attributed to Henk Wymeersch.

At least 235 records · Page 13Linked to original sources

arXiv2022

Smart Wireless Environments Enabled by RISs: Deployment Scenarios and Two Key Challenges

Reconfigurable Intelligent Surfaces (RISs) constitute the enabler for programmable propagation of electromagnetic signals, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless communications networks. In this paper, we present various deployment scenarios for RIS-enabled smart wireless environments that have been recently designed by the ongoing EU H2020 RISE-6G project. The scenarios are taxonomized according to performance objectives, in particular, connectivity and reliability, localization and sensing, as well as sustainability and secrecy. We identify various deployment strategies and sketch the core architectural requirements in terms of RIS control and signaling, depending on the RIS hardware architectures and their respective capabilities. Furthermore, we introduce and discuss, via preliminary simulation results and reflectarray measurements, two key novel challenges with RIS-enabled smart wireless environments, namely, the area of influence and the bandwidth of influence of RISs, which corroborate the need for careful deployment and planning of this new technology.

cs.IT↗

arXiv2022

Benchmarking and Interpreting End-to-end Learning of MIMO and Multi-User Communication

End-to-end autoencoder (AE) learning has the potential of exceeding the performance of human-engineered transceivers and encoding schemes, without a priori knowledge of communication-theoretic principles. In this work, we aim to understand to what extent and for which scenarios this claim holds true when comparing with fair benchmarks. Our particular focus is on memoryless multiple-input multiple-output (MIMO) and multi-user (MU) systems. Four case studies are considered: two point-to-point (closed-loop and open-loop MIMO) and two MU scenarios (MIMO broadcast and interference channels). For the point-to-point scenarios, we explain some of the performance gains observed in prior work through the selection of improved baseline schemes that include geometric shaping as well as bit and power allocation. For the MIMO broadcast channel, we demonstrate the feasibility of a novel AE method with centralized learning and decentralized execution. Interestingly, the learned scheme performs close to nonlinear vector-perturbation precoding and significantly outperforms conventional zero-forcing. Lastly, we highlight potential pitfalls when interpreting learned communication schemes. In particular, we show that the AE for the considered interference channel learns to avoid interference, albeit in a rotated reference frame. After de-rotating the learned signal constellation of each user, the resulting scheme corresponds to conventional time sharing with geometric shaping.

cs.IT↗

arXiv2022

Arbitrary Beam Pattern Approximation via RISs with Measured Element Responses

Smart radio environments (SREs) are seen as a key rising concept of next generation wireless networks, where propagation channels between transmitters and receivers are purposely controlled. One promising approach to achieve such channel flexibility relies on semipassive reflective Reconfigurable intelligent surfaces (RISs), which can shape the bouncing multipath signals for enhancing communication quality of service, making localization feasible in adverse operating conditions, or reducing unwanted electromagnetic emissions. This paper introduces a generic framework that aims at optimizing the end-to-end precoder controlled by RISs, so that arbitrary beam patterns can be generated, given a predefined lookup table of RIS element-wise complex reflection coefficients. This method is validated and illustrated for different targeted beam patterns in both the far-field and the near-field regimes, while considering the prior characterization of real-life RIS hardware prototypes. These results show how, and to which extent, RIS configuration optimization can approximate the desired beams under realistic hardware limitations and low-complexity implementation practicability, or conversely, which RIS elements' lookup tables would be more suitable. The latter can provide useful guidelines for future RIS hardware designs.

eess.SP↗

arXiv2022

Localization via Multiple Reconfigurable Intelligent Surfaces Equipped with Single Receive RF Chains

The extra degrees of freedom resulting from the consideration of Reconfigurable Intelligent Surfaces (RISs) for smart signal propagation can be exploited for high accuracy localization and tracking. In this paper, capitalizing on a recent RIS hardware architecture incorporating a single receive Radio Frequency (RF) chain for measurement collection, we present a user localization method with multiple RISs. The proposed method includes an initial step for direction estimation at each RIS, followed by maximum likelihood position estimation, which is initialized with a least squares line intersection technique. Our numerical results showcase the accuracy of the proposed localization, verifying our theoretical estimation analysis.

cs.IT↗

arXiv2022

RIS-Enabled Self-Localization: Leveraging Controllable Reflections With Zero Access Points

Reconfigurable intelligent surfaces (RISs) are one of the most promising technological enablers of the next (6th) generation of wireless systems. In this paper, we introduce a novel use-case of the RIS technology in radio localization, which is enabling the user to estimate its own position via transmitting orthogonal frequency-division multiplexing (OFDM) pilots and processing the signal reflected from the RIS. We demonstrate that user localization in this scenario is possible by deriving Cramer-Rao lower bounds on the positioning error and devising a low-complexity position estimation algorithm. We consider random and directional RIS phase profiles and apply a specific temporal coding to them, such that the reflected signal from the RIS can be separated from the uncontrolled multipath. Finally, we assess the performance of our position estimator for an example system and show that the proposed algorithm can attain the derived bound at high signal-to-noise ratio values.

eess.SP↗

arXiv2022

Can Deep Learning be Applied to Model-Based Multi-Object Tracking?

Multi-object tracking (MOT) is the problem of tracking the state of an unknown and time-varying number of objects using noisy measurements, with important applications such as autonomous driving, tracking animal behavior, defense systems, and others. In recent years, deep learning (DL) has been increasingly used in MOT for improving tracking performance, but mostly in settings where the measurements are high-dimensional and there are no available models of the measurement likelihood and the object dynamics. The model-based setting instead has not attracted as much attention, and it is still unclear if DL methods can outperform traditional model-based Bayesian methods, which are the state of the art (SOTA) in this context. In this paper, we propose a Transformer-based DL tracker and evaluate its performance in the model-based setting, comparing it to SOTA model-based Bayesian methods in a variety of different tasks. Our results show that the proposed DL method can match the performance of the model-based methods in simple tasks, while outperforming them when the task gets more complicated, either due to an increase in the data association complexity, or to stronger nonlinearities of the models of the environment.

cs.LG↗

arXiv2022

Optimal Spatial Signal Design for mmWave Positioning under Imperfect Synchronization

We consider the problem of spatial signal design for multipath-assisted mmWave positioning under limited prior knowledge on the user's location and clock bias. We propose an optimal robust design and, based on the low-dimensional precoder structure under perfect prior knowledge, a codebook-based heuristic design with optimized beam power allocation. Through numerical results, we characterize different position-error-bound (PEB) regimes with respect to clock bias uncertainty and show that the proposed low-complexity codebook-based designs outperform the conventional directional beam codebook and achieve near-optimal PEB performance for both analog and digital architectures.

eess.SP↗

arXiv2022

Millimeter-wave Mobile Sensing and Environment Mapping: Models, Algorithms and Validation

Integrating efficient connectivity, positioning and sensing functionalities into 5G New Radio (NR) and beyond mobile cellular systems is one timely research paradigm, especially at mm-wave and sub-THz bands. In this article, we address the radio-based sensing and environment mapping prospects with specific emphasis on the user equipment (UE) side. We first describe an efficient l1-regularized least-squares (LS) approach to obtain sparse range-angle charts at individual measurement or sensing locations. For the subsequent environment mapping, we then introduce a novel state model for mapping diffuse and specular scattering, which allows efficient tracking of individual scatterers over time using interacting multiple model (IMM) extended Kalman filter and smoother. Also the related measurement selection and data association problems are addressed. We provide extensive numerical indoor mapping results at the 28 GHz band deploying OFDM-based 5G NR uplink waveform with 400 MHz channel bandwidth, covering both accurate ray-tracing based as well as actual RF measurement results. The results illustrate the superiority of the dynamic tracking-based solutions, compared to static reference methods, while overall demonstrate the excellent prospects of radio-based mobile environment sensing and mapping in future mm-wave networks.

eess.SP↗

arXiv2021

Reconfigurable Intelligent Surfaces: A Signal Processing Perspective With Wireless Applications

Antenna array technology enables directional transmission and reception of wireless signals, for communications, localization, and sensing purposes. The signal processing algorithms that underpin this technology began to be developed several decades ago [1], but it is first with the ongoing deployment of the fifth-generation (5G) wireless mobile networks that it becomes a mainstream technology [2]. The number of antenna elements in the arrays of the 5G base stations and user devices can be measured at the order of 100 and 10, respectively. As the networks shift towards using higher frequency bands, more antennas fit into a given aperture. The 5G developments enhance the transmitter and receiver functionalities, but the wireless channel propagation remains an uncontrollable system. This is illustrated in Fig. 1(a) and its mathematical notation will be introduced later. Transmitted signals with three different frequencies are shown to illustrate the fact that attenuation can vary greatly across frequencies. Looking beyond 5G, the advent of electromagnetic components that can shape how they interact with wireless signals enables partial control of the propagation. A reconfigurable intelligent surface (RIS) is a two-dimensional surface of engineered material whose properties are reconfigurable rather than static [4]. This article provides a tutorial on the fundamental properties of the RIS technology from a signal processing perspective. It is meant as a complement to recent surveys of electromagnetic and hardware aspects [4], [7], [11], acoustics [12], communication theory [13], and localization [8]. We will provide the formulas and derivations that are required to understand and analyze RIS-aided systems using signal processing, and exemplify how they can be utilized for improved communication, localization, and sensing.

eess.SP↗

arXiv2021

Iterated Posterior Linearization PMB Filter for 5G SLAM

5G millimeter wave (mmWave) signals have inherent geometric connections to the propagation channel and the propagation environment. Thus, they can be used to jointly localize the receiver and map the propagation environment, which is termed as simultaneous localization and mapping (SLAM). One of the most important tasks in the 5G SLAM is to deal with the nonlinearity of the measurement model. To solve this problem, existing 5G SLAM approaches rely on sigma-point or extended Kalman filters, linearizing the measurement function with respect to the prior probability density function (PDF). In this paper, we study the linearization of the measurement function with respect to the posterior PDF, and implement the iterated posterior linearization filter into the Poisson multi-Bernoulli SLAM filter. Simulation results demonstrate the accuracy and precision improvements of the resulting SLAM filter.

eess.SP↗

arXiv2021

Learning to Estimate RIS-Aided mmWave Channels

Inspired by the remarkable learning and prediction performance of deep neural networks (DNNs), we apply one special type of DNN framework, known as model-driven deep unfolding neural network, to reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) single-input multiple-output (SIMO) systems. We focus on uplink cascaded channel estimation, where known and fixed base station combining and RIS phase control matrices are considered for collecting observations. To boost the estimation performance and reduce the training overhead, the inherent channel sparsity of mmWave channels is leveraged in the deep unfolding method. It is verified that the proposed deep unfolding network architecture can outperform the least squares (LS) method with a relatively smaller training overhead and online computational complexity.

eess.SP↗

arXiv2021

Model-Based End-to-End Learning for WDM Systems With Transceiver Hardware Impairments

We propose an AE-based transceiver for a WDM system impaired by hardware imperfections. We design our AE following the architecture of conventional communication systems. This enables to initialize the AE-based transceiver to have similar performance to its conventional counterpart prior to training and improves the training convergence rate. We first train the AE in a single-channel system, and show that it achieves performance improvements by putting energy outside the desired bandwidth, and therefore cannot be used for a WDM system. We then train the AE in a WDM setup. Simulation results show that the proposed AE significantly outperforms the conventional approach. More specifically, it increases the spectral efficiency of the considered system by reducing the guard band by 37\% and 50\% for a root-raised-cosine filter-based matched filter with 10\% and 1\% roll-off, respectively. An ablation study indicates that the performance gain can be ascribed to the optimization of the symbol mapper, the pulse-shaping filter, and the symbol demapper. Finally, we use reinforcement learning to learn the pulse-shaping filter under the assumption that the channel model is unknown. Simulation results show that the reinforcement-learning-based algorithm achieves similar performance to the standard supervised end-to-end learning approach assuming perfect channel knowledge.

eess.SP↗

arXiv2021

Symbol-Based Over-the-Air Digital Predistortion Using Reinforcement Learning

We propose an over-the-air digital predistortion optimization algorithm using reinforcement learning. Based on a symbol-based criterion, the algorithm minimizes the errors between downsampled messages at the receiver side. The algorithm does not require any knowledge about the underlying hardware or channel. For a generalized memory polynomial power amplifier and additive white Gaussian noise channel, we show that the proposed algorithm achieves performance improvements in terms of symbol error rate compared with an indirect learning architecture even when the latter is coupled with a full sampling rate ADC in the feedback path. Furthermore, it maintains a satisfactory adjacent channel power ratio.

eess.SP↗

arXiv2021

Beamspace Multidimensional ESPRIT Approaches for Simultaneous Localization and Communications

Modern wireless communication systems operating at high carrier frequencies are characterized by a high dimensionality of the underlying parameter space (including channel gains, angles, delays, and possibly Doppler shifts). Estimating these parameters is valuable for communication purposes, but also for localization and sensing, making channel estimation a critical component in any joint communication and localization or sensing application. The high dimensionality make it difficult to use search-based methods such as maximum likelihood. Search-free methods such as ESPRIT provide an attractive alternative, but require a complex decomposition step in both the tensor and matrix version of ESPRIT. To mitigate this, we propose, develop, and analyze a reduced complexity beamspace ESPRIT method. Complexity is reduced both by beampace processing as well as low-complex implementation of the singular value decomposition. A novel perturbation analysis provides important insights for both channel estimation and localization performance. The proposed method is compared to the tensor ESPRIT method, in terms of channel estimation, communication, localization, and sensing performance, further validating the perturbation analysis.

eess.SP↗

arXiv2021

End-to-End Learning for Integrated Sensing and Communication

Integrated sensing and communication (ISAC) aims to unify radar and communication systems through a combination of joint hardware, joint waveforms, joint signal design, and joint signal processing. At high carrier frequencies, where ISAC is expected to play a major role, joint designs are challenging due to several hardware limitations. Model-based approaches, while powerful and flexible, are inherently limited by how well the models represent reality. Under model deficit, data-driven methods can provide robust ISAC performance. We present a novel approach for data-driven ISAC using an auto-encoder (AE) structure. The approach includes the proposal of the AE architecture, a novel ISAC loss function, and the training procedure. Numerical results demonstrate the power of the proposed AE, in particular under hardware impairments.

eess.SP↗

arXiv2021

Reconfigurable, Intelligent, and SustainableWireless Environments for 6G Smart Connectivity

Various visions on the forthcoming sixth Generation (6G) networks point towards flexible connect-and-compute technologies to support future innovative services and the corresponding use cases. 6G should be capable to accommodate ever-evolving and heterogeneous applications, future regulations, and diverse user-, service-, and location-based requirements. A key element towards building smart and energy sustainable wireless systems beyond 5G is the Reconfigurable Intelligent Surface (RIS), which offers programmable control and shaping of the wireless propagation environment. Capitalizing on this technology potential, in this article we introduce two new concepts: i) wireless environment as a service, which leverages a novel RIS-empowered networking paradigm to trade off diverse, and usually conflicting, connectivity objectives; and ii) performance-boosted areas enabled by RIS-based connectivity, representing competing service provisioning areas that are highly spatially and temporally focused. We discuss the key technological enablers and research challenges with the proposed networking paradigm, and highlight the potential profound role of RISs in the recent Open Radio Access Network (O-RAN) architecture.

cs.NI↗

arXiv2021

RIS-Enabled Localization Continuity Under Near-Field Conditions

Reconfigurable intelligent surfaces (RISs) have the potential to enable user localization in scenarios where traditional approaches fail. Building on prior work in single-antenna RIS-enabled localization, we investigate the potential to exploit wavefront curvature in geometric near-field conditions. Via a Fisher information analysis, we demonstrate that while near-field improves localization accuracy mostly at short distances when the line-of-sight (LoS) path is present, it could still provide reasonable performance when this path is blocked by relying on a single RIS reflection.

eess.SP↗

arXiv2021

Beyond 5G RIS mmWave Systems: Where Communication and Localization Meet

Upcoming beyond fifth generation (5G) communications systems aim at further enhancing key performance indicators and fully supporting brand new use cases by embracing emerging techniques, e.g., reconfigurable intelligent surface (RIS), integrated communication, localization, and sensing, and mmWave/THz communications. The wireless intelligence empowered by state-of-the-art artificial intelligence techniques has been widely considered at the transceivers, and now the paradigm is deemed to be shifted to the smart control of radio propagation environment by virtue of RISs. In this article, we argue that to harness the full potential of RISs, localization and communication must be tightly coupled. This is in sharp contrast to 5G and earlier generations, where localization was a minor additional service. To support this, we first introduce the fundamentals of RIS mmWave channel modeling, followed by RIS channel state information acquisition and link establishment. Then, we deal with the connection between localization and communications, from a separate and joint perspective.

eess.SP↗