arXiv subjects

Hiroyuki Takeya

Publications and source records attributed to Hiroyuki Takeya.

At least 19 recordsLinked to original sources

arXiv2026

Fermi-surface-sheet dependent electron-phonon coupling in a borocarbide superconductor YNi$_2$B$_2$C

We performed de Haas-van Alphen (dHvA) oscillation measurements and band-structure calculations for YNi$_2$B$_2$C. Our improved band structure successfully explained the origins of the large dHvA frequencies $\beta$ and $\zeta$, which were inexplicable in previous works. By comparing experimental effective masses with band masses, we determined the electron-phonon coupling for each orbit. The results showed a clear Fermi-surface-sheet dependence of the electron-phonon coupling strength, especially highlighting that the coupling for the band-28 sheet is very weak, almost absent for the orbit with $B \parallel c$. This finding is consistent with previous observations of dHvA oscillations from this orbit in the mixed state down to very low fields. Amidst growing interest in high-temperature superconductivity driven by electron-phonon coupling in hydrides under high pressure, this study provides foundational data pivotal to precisely understanding electron-phonon coupling.

cond-mat.supr-con↗

arXiv2025

Highly anisotropic magnetic phase diagram of the ferromagnetic rare-earth diboride HoB$_{2}$

Rare-earth (RE) compounds have been of enormous interest in condensed matter physics as a platform for the exploration of interesting physical phenomena. Here, we report the successful single crystal growth of HoB$_{2}$, which exhibits a paramagnetic (PM)-ferromagnetic (FM) phase transition at 15 K and another phase transition at 11 K, and the discovery of a highly anisotropic magnetic phase diagram of this FM diboride. Magnetization measurements suggest that the ferromagnetically ordered moments of Ho$^{3+}$ ions are oriented at a direction tilted by 50 degrees from the ab-plane at 2K, which rotate largely toward the ab-plane direction upon application of a magnetic field, but hardly toward the c-axis direction. Heat capacity and electrical resistivity measurements clearly demonstrate that the low-temperature phase transition at 11 K occurs even under high magnetic fields along the ab-plane direction, whereas it disappears immediately by magnetic fields along the c-axis direction. Moreover, the field-induced crossover phenomenon between FM and PM phases near 15 K is found to be more promoted when applying a magnetic field along the ab-plane direction. The resulting magnetic phase diagram reveals that in-plane magnetic anisotropy is predominant in the present system, which contradicts the previous report of a spin reorientation phenomenon toward the c-axis direction between 11 K and 15 K. Taken together, the present findings suggest the presence of strong competition between in-plane and out-of-plane magnetic anisotropies in HoB$_{2}$, giving rise to the unique FM spin arrangement.

cond-mat.str-el↗

arXiv2023

Experimental exploration of ErB$_2$ and SHAP analysis on a machine-learned model of magnetocaloric materials for materials design

Stimulated by a recent report of a giant magnetocaloric effect in HoB$_2$ found via machine-learning predictions, we have explored the magnetocaloric properties of a related compound ErB$_2$, that has remained the last ferromagnetic material among the rare-earth diboride (REB$_2$) family with unreported magnetic entropy change |{\Delta}SM|. The evaluated $|\Delta S_M|$ at field change of 5 T in ErB$_2$ turned out to be as high as 26.1 (J kg$^{-1}$ K$^{-1}$) around the ferromagnetic transition (${T_C}$) of 14 K. In this series, HoB$_2$ is found to be the material with the largest $|\Delta S_M|$ as the model predicted, while the predicted values showed a deviation with a systematic error compared to the experimental values. Through a coalition analysis using SHAP, we explore how this rare-earth dependence and the deviation in the prediction are deduced in the model. We further discuss how SHAP analysis can be useful in clarifying favorable combinations of constituent atoms through the machine-learned model with compositional descriptors. This analysis helps us to perform materials design with aid of machine learning of materials data.

cond-mat.mtrl-sci↗

arXiv2022

Tunable magnetic and magnetocaloric properties by thermal annealing in ErCo2 atomized particles

Processing magnetocaloric materials into magnetic refrigerants with appropriate shapes is essential for the development of magnetic refrigeration systems. In this context, the impact of processing on the physical properties of magnetocaloric materials is one of the important issues. Here, we investigate the crystallographic, magnetic, and magnetocaloric properties of gas-atomized particles of the intermetallic compound ErCo$_{2}$, a giant magnetocaloric material for low-temperature applications. The results demonstrate that the physical properties of ErCo$_{2}$ are significantly changed by atomization and subsequent thermal annealing. In the as-atomized particles, the magnetic transition temperature increases from 34 to 56 K and the phase transition changes from first order to second order. The thermal annealing shifts the transition temperature back to the original one and restores the first-order phase transition characteristic. The changes in magnetic properties are closely related to those in crystallographic properties, suggesting the importance of the magneto-structural coupling. The magnetic entropy change $-\Delta S_{M}$ of the particles can be tuned in size, shape, and peak temperature depending on the annealing conditions. The peak value of $-\Delta S_{M}$ varies in the range of 9--33 J kg$^{-1}$ K$^{-1}$ for a magnetic field change of 0--5 T. All the ErCo$_{2}$ atomized particles have magnetocaloric properties comparable or superior to other promising candidates for low-temperature magnetic refrigerants.

cond-mat.mtrl-sci↗

arXiv2022

Magnetic, thermal, and magnetocaloric properties of the holmium trialuminide HoAl$_{3}$ with polytypic phases

We investigate the magnetic, thermal, and magnetocaloric properties of the intermetallic HoAl$_{3}$ compounds with two different crystal structures. The room-temperature equilibrium trigonal phase HoAl$_{3}$ undergoes an antiferromagnetic (AFM) transition at the Neel temperature $T^{\rm tri}_{\rm N} =$ 9.8 K. The AFM ordering of the compound is strong against the magnetic field, so that inverse magnetocaloric effect (MCE) is found even under a magnetic field change of 0-50 kOe. The high-pressure cubic phase HoAl3, prepared by a rapid-solidification process, is antiferromagnetically ordered below $T^{\rm cub}_{\rm N} =$ 15 K. Magnetic and specific heat measurements reveal that this long-range AFM state becomes unstable as the temperature drops and then it is replaced by a magnetic glassy state below a spin freezing temperature $T_{\rm f} =$ 11 K. The successive changes in magnetic state result in complicated temperature and field dependence of the MCE at low temperatures.

cond-mat.mtrl-sci↗

arXiv2022

Neural networks for a quick access to a digital twin of scanning physical properties measurements

For performing successful measurements within limited experimental time, efficient use of preliminary data plays a crucial role. This work shows that a simple feedforward type neural networks approach for learning preliminary experimental data can provide quick access to simulate the experiment within the learned range. The approach is especially beneficial for physical properties measurements with scanning on multiple axes, where derivative or integration of data are required to obtain the objective quantity. Due to its simplicity, the learning process is fast enough for the users to perform learning and simulation on-the-fly by using a combination of open-source optimization techniques and deep-learning libraries. Here such a tool for augmenting the experimental data is proposed, aiming to help researchers to decide the most suitable experimental conditions before performing costly experiments in real. Furthermore, this tool can also be used from the perspective of taking advantage of reutilizing and repurposing previously published data, accelerating data-driven exploration of functional materials.

cond-mat.mtrl-sci↗

arXiv2022

Magnetocaloric particles of the Laves phase compound HoAl2 prepared by electrode induction melting gas atomization

Processing magnetocaloric materials into magnetic refrigerant particles is an essential issue in developing high-performance magnetic refrigerators. Here, we succeed in stably producing magnetocaloric particles of the promising material HoAl2 by a newly devised method based on electrode induction melting gas atomization process. The particle size range is on the order of submillimeter, which is suitable for practical refrigeration systems. The resulting particles with less contamination have good morphological, magnetic, and magnetocaloric properties: (i) almost spherical shapes with few internal pores, (ii) a sharp ferromagnetic transition around 30 K, and (iii) a large magnetocaloric effect comparable to the bulk counterpart. These features suggest the HoAl$_{2}$ gas-atomized particles have the potential of use as a magnetic refrigerant. The presented method can be applied not only to HoAl2 but also to other brittle magnetocaloric materials with high melting points, facilitating the production of various magnetic refrigerants needed to develop magnetic refrigerators for hydrogen liquefaction.

cond-mat.mtrl-sci↗

arXiv2022

Gas-atomized particles of giant magnetocaloric compound HoB2 for magnetic hydrogen liquefiers

The processing of promising magnetocaloric materials into spheres is one of the important issues on developing high-performance magnetic refrigeration systems. In the present study, we achieved in producing spherical particles of a giant magnetocaloric compound HoB2 by a crucible-free gas atomization process, despite its high melting point of 2350 C. The particle size distribution ranges from 100 to 710 micrometers centered at 212-355 micrometers with the highest yield of 14-20wt% of total melted electrode, which is suitable for magnetic refrigeration systems. The majority of the resulting particles are mostly spherical with no contamination during the processing, while unique microstructures are observed on the surface and inside. These spherical particles exhibit sharp magnetic transitions and huge magnetic entropy change of 0.34 J cm^{-3} K^{-1} for a magnetic field change of 5 T at 15.5 K. The high sphericality and the high magnetocaloric performance suggest that the HoB2 gas-atomized particles have good potential as magnetic refrigerants for use in magnetic refrigerators for hydrogen liquefaction.

cond-mat.mtrl-sci↗

arXiv2022

Adiabatic temperature change in ErAl2/metal PIT wires: A practical method for estimating the magnetocaloric response of magnetocaloric composites

We report the adiabatic temperature change in ErAl2 magnetocaloric wires fabricated by a powder-in-tube (PIT) process. The adiabatic temperature change of the PIT wires is found to be determined by not only the volume fraction of ErAl2 core but also the magnitude relationship between the specific heat of the ErAl2 core and the metal sheath. We propose a quantitative analysis method for calculating the temperature and core volume fraction dependence of adiabatic temperature change in the PIT wire, whose formula is applicable to also various magnetocaloric composites, useful to estimate the magnetocaloric response prior to fabrication.

cond-mat.mtrl-sci↗

arXiv2021

XERUS: An open-source tool for quick XRD phase identification and refinement automation

Analysis of XRD diffraction patterns is one of the keystones of materials science and materials research. With the advancement of data-driven methods for materials design, candidate materials can be quickly screened for the study of a desired physical property. Efficient methods to automatically analyze and identify phases present in a given pattern, are paramount for the success of this new paradigm. To aid this process, the open source python package Xray Estimation and Refinement Using Similarity (XERUS) for semi-automatic/automatic phase identification is presented. XERUS takes advantages of open crystal structure databases, not relying on proprietary databases, to obtain crystal structures on the fly, being then chemical space agnostic. By wrapping around GSASII, it can automatically simulate patterns and calculate similarity measures used for phase identification. Our approach is simple and quick but also applicable to multiphase identification, by coupling the similarity calculations with quick refinements followed by an iterative peak removal process. XERUS is shown in action in four different experimental datasets and also it is benchmarked against a recently proposed deep learning method for a mixture dataset covering the Li-Mn-O-F chemical space. XERUS will be freely available on https://www.github.com/pedrobcst/Xerus/

cond-mat.mtrl-sci↗

arXiv2021

Pressure-induced superconductivity in TiGeTe$_{6}$

Layered ternary transition-metal chalcogenides have been focused as a vein of exploration for superconductors. In this study, TiGeTe$_{6}$ single crystals were synthesized and characterized by structural and valence state analyses and electrical transport measurements. The transport properties were measured under various pressures up to 71 GPa. The activation energy gets smaller as the applied pressure increases, and a signature of a pressure-induced metallization was observed under around 8.4 GPa. Under 13 GPa, pressure-induced superconductivity was discovered in this compound for the first time, with successive drops at 3 K and 6 K in the resistance, indicating the presence of multiple superconducting transitions. The superconducting transition temperature kept increasing as we further applied the pressure to the TiGeTe$_{6}$ single crystal in the performed pressure range, reaching as high as 8.1 K under 71 GPa.

cond-mat.supr-con↗

arXiv2020

THz emission from a Bi2Sr2CaCu2O8+δ cross-whisker junction

Cuprate superconductor Bi2Sr2CaCu2O8+δ (BSCCO) has been a promising candidate of a coherent, continuous, and compact THz light source owing to its intrinsic Josephson junction inside the crystal structure. In this paper, we utilized BSCCO cross-whisker junctions to produce THz emitter device using the whisker crystals which can be easily obtained compared with single crystals. As a result, we have successfully observed the emission from the cross-whisker intrinsic Josephson junction, with frequency of ~0.7 THz. Our findings might enlarge the applicability of BSCCO superconductors for the THz emission source.

cond-mat.supr-con↗

arXiv2020

Enhancement of giant refrigerant capacity in Ho$_{1-x}$Gd$_{x}$B$_{2}$ alloys (0.1 $\leq$ x $\leq$ 0.4)

Intending to optimize the giant magnetocaloric properties of HoB$_{2}$, we synthesized and magnetocalorically characterized Ho$_{1-x}$Gd$_{x}$B$_{2}$(0.1 $\leq$ x $\leq$ 0.4) alloys. We found out that Gd enters stoichiometrically and randomly into the Ho site, leading to a Vegard-type structural change. The addition of spherical S$^{7/2}$ Gd$^{3+}$ moments prompts an enhancement in Curie temperature, a reduction in peak value of the magnetic entropy change while still being relatively high, and a broadening of the magnetic entropy change curves. The overall influence is a relatively high refrigerant capacity and relative cooling power, and an extension of the thermal working range to higher temperatures; thus, electing Ho$_{1-x}$Gd$_{x}$B$_{2}$(as potential candidates for cryogenic refrigeration applications.

cond-mat.mtrl-sci↗

arXiv2020

Pressure-Induced Superconductivity in Layered Transition-metal Chalcogenides (Zr,Hf)GeTe$_{4}$ Explored by Data-driven Approach

Layered transition-metal chalcogenides (Zr,Hf)GeTe$_{4}$ were screened out from database of Atomwork as a candidate for pressure-induced superconductivity due to their narrow band gap and high density of state near the Fermi level. The (Zr,Hf)GeTe$_{4}$ samples were synthesized in single crystal and then the compositional ratio, crystal structures, and valence states were investigated via energy dispersive spectrometry, single crystal X-ray diffraction, and X-ray photoelectron spectroscopy, respectively. The pressure-induced superconductivity in both crystals were first time reported by using a diamond anvil cell with a boron-doped diamond electrode and an undoped diamond insulating layer. The maximum superconducting transition temperatures of ZrGeTe$_{4}$ and HfGeTe$_{4}$ were 6.5 K under 57 GPa and 6.6 K under 60 GPa, respectively.

cond-mat.supr-con↗

arXiv2020

Electrical transport measurements for superconducting sulfur hydrides using boron-doped diamond electrodes on beveled diamond anvil

A diamond anvil cell (DAC) which can generate extremely high pressure of multi-megabar is promising tool to develop a further physics such a high-transition temperature superconductivity. However, electrical transport measurements, which is one of the most important properties of such functional materials, using the DAC is quite difficult because the sample space is very small and a deformation of electrodes under extreme condition. In this study, we fabricated a boron-doped diamond micro-electrode and an undoped diamond insulation on a beveled culet surface of the diamond anvil. By using the developed DAC, we demonstrated the electrical transport measurements for sulfur hydride H$_2$S which known as a pressure-induced high-transition temperature superconducting H$_3$S at high pressure. The measurements were successfully conducted under high pressure up to 192 GPa, and then a multi-step superconducting transition composed from pure sulfur and some kinds of surfer hydrides, which is possible HS$_2$, was observed with zero resistance.

cond-mat.supr-con↗

arXiv2020

Effect of Dy substitution in the giant magnetocaloric properties of HoB$_{2}$

Recently, a massive magnetocaloric effect near the liquefaction temperature of hydrogen has been reported in the ferromagnetic material HoB$_{2}$. Here we investigate the effects of Dy substitution in the magnetocaloric properties of Ho$_{1-x}$Dy$_{x}$B$_{2}$ alloys ($\textit{x}$ = 0, 0.3, 0.5, 0.7, 1.0). We find that the Curie temperature ($\textit{T}$$_{C}$) gradually increases upon Dy substitution, while the magnitude of the magnetic entropy change |$Δ\textit{S}_{M}$| at $\textit{T}$ = $\textit{T}_{C}$ decreases from 0.35 to 0.15 J cm$^{-3}$ K$^{-1}$ for a field change of 5 T. Due to the presence of two magnetic transitions in these alloys, despite the change in the peak magnitude of |$Δ\textit{S}_{M}$|, the refrigerant capacity ($\textit{RC}$) and refrigerant cooling power ($\textit{RCP}$) remains almost constant in all doping range, which as large as 5.5 J cm$^{-3}$ and 7.0 J cm$^{-3}$ for a field change of 5 T. These results imply that this series of alloys could be an exciting candidate for magnetic refrigeration in the temperature range between 10-50 K.

cond-mat.mtrl-sci↗

arXiv2020

Demonstration of Electric Double Layer Gating under High Pressure by the Development of Field-Effect Diamond Anvil Cell

We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied to a Bi thin film, and here we report the field-effect under high pressure in the material. Our EDLT-DAC is a promising device for exploring unknown physical phenomena such as high transition-temperature superconductivity (HTS).

cond-mat.mtrl-sci↗

arXiv2020

Machine Learning Guided Discovery of Gigantic Magnetocaloric Effect in HoB$_{2}$ Near Hydrogen Liquefaction Temperature

Magnetic refrigeration exploits the magnetocaloric effect which is the entropy change upon application and removal of magnetic fields in materials, providing an alternate path for refrigeration other than the conventional gas cycles. While intensive research has uncovered a vast number of magnetic materials which exhibits large magnetocaloric effect, these properties for a large number of compounds still remain unknown. To explore new functional materials in this unknown space, machine learning is used as a guide for selecting materials which could exhibit large magnetocaloric effect. By this approach, HoB$_{2}$ is singled out, synthesized and its magnetocaloric properties are evaluated, leading to the experimental discovery of gigantic magnetic entropy change 40.1 J kg$^{-1}$ K$^{-1}$ (0.35 J cm$^{-3}$ K$^{-1}$) for a field change of 5 T in the vicinity of a ferromagnetic second-order phase transition with a Curie temperature of 15 K. This is the highest value reported so far, to our knowledge, near the hydrogen liquefaction temperature thus it is a highly suitable material for hydrogen liquefaction and low temperature magnetic cooling applications.

cond-mat.mtrl-sci↗