Searcharxiv⌕ Search

arXiv subjects

Hiroyuki Takeya

Publications and source records attributed to Hiroyuki Takeya.

At least 73 records · Page 4Linked to original sources
arXiv2013

Coexistence of bulk superconductivity and ferromagnetism in CeO1-xFxBiS2

We show the observation of the coexistence of bulk superconductivity and ferromagnetism in CeO1-xFxBiS2(x = 0 - 1.0) prepared by annealing under high-pressure. In CeO1-xFxBiS2 system, both superconductivity and two types of ferromagnetism with respective magnetic transition temperatures of 4.5 K and 7.5 K are induced upon systematic F substitution. This fact suggests that carriers generated by the substitution of O by F are supplied to not only the BiS2 superconducting layers but also the CeO blocking layers. Furthermore, the highest superconducting transition temperature is observed when the ferromagnetism is also enhanced, which implies that superconductivity and ferromagnetism are linked to each other in the CeO1-xFxBiS2 system.

cond-mat.supr-con↗
arXiv2013

α-FeAs-free SmFeAsO1-xFx by low temperature sintering with slow cooling

We obtained amorphous-FeAs-free SmFeAsO1-xFx using a low temperature sintering with slow cooling. SmFeAsO1-xFx is sintered at 980 °C for 40 hours and cooled slowly down to 600 °C. The low temperature sintering suppresses the formation of amorphous FeAs, and the slow cooling introduces much fluorine into SmFeAsO1-xFx. The superconductivity of this sample appears at 57.8 K and the superconducting volume fraction reaches 96 %. To study the change of fluorine concentration during the cooling process, samples are quenched by water at 950 °C, 900 °C, 850 °C, 800 °C, 750 °C and 700 °C. It is found that fluorine is substituted not only at the maximum heating temperature but also during the cooling process. The low temperature sintering with slow cooling is very effective to obtain a homogeneous SmFeAsO1-xFx with high fluorine concentration.

cond-mat.supr-con↗
arXiv2013

Phase diagram and superconductivity at 58.1 K in α-FeAs free SmFeAsO1-xFx

The Phase diagram of SmFeAsO1-xFx in terms of x is exhibited in this study. SmFeAsO1-xFx from x = 0 to x = 0.3 were prepared by low temperature sintering with slow cooling. The low temperature sintering suppresses the formation of the amorphous FeAs, which is inevitably produced as an impurity by using high temperature sintering. Moreover, slow cooling is effective to obtain the high fluorine concentration. The compositional change from feedstock composition is quite small after this synthesis. We can reproducibly observe a record superconducting transition for an iron based superconductor at 58.1 K. This achievement of a high superconducting transition is due to the success in a large amount of fluorine substitution. A shrinking of the a lattice parameter caused by fluorine substitution is observed and the substitutional rate of fluorine changes at x =0.16.

cond-mat.supr-con↗
arXiv2013

Evolution of superconductivity in isovalent Te-substituted KxFe2-ySe2 crystals

We report the evolution of superconductivity and the phase diagram of the KxFe2-ySe2-zTez (z=0-0.6) crystals grown by a simple one-step synthesis. No structural transition is observed in any crystals, while lattice parameters exhibit a systematic expansion with Te content. The Tc exhibits a gradual decrease with increasing Te content from Tconset = 32.9 K at z = 0 to Tconset = 27.9 K at z = 0.5, followed by a sudden suppression of superconductivity at z = 0.6. Upon approaching a Te concentration of 0.6, the shielding volume fraction decreases and eventually drops to zero. Simultaneously, hump positions in r-T curve shift to lower temperatures. These results suggest that isovalent substitution of Te for Se in KxFe2-ySe2 crystals suppresses the superconductivity in this system.

cond-mat.supr-con↗
arXiv2012

Effect of the indium addition on the superconducting property and the impurity phase in polycrystalline SmFeAsO1-xFx

We report enhancement in the magnetic critical current density of indium added polycrystalline SmFeAsO1-xFx. The value of magnetic Jc is around 25 kA/cm2 at 4.2 K under self-magnetic field. Polycrystalline SmFeAsO1-xFx is mainly composed of the superconducting grains and a little of amorphous FeAs compounds. These areas randomly co-exist and amorphous areas are located between superconducting grains. Therefore, the superconducting current is prevented by the amorphous areas. In this study, it is found that indium addition to polycrystalline SmFeAsO1-xFx removes these amorphous areas and induces the bringing together the superconducting grains. It means the total contact surfaces of grains are increased. We suggest that the enhancement of the magnetic critical current density is a direct effect of the indium addition.

cond-mat.supr-con↗
arXiv2012

Weak Spin Fluctuation with Finite Wave Vector and Superconducting Gap Symmetry in KxFe2-ySe2: 77Se Nuclear Magnetic Resonance

We report $^{77}$Se-nuclear magnetic resonance (NMR) results down to sufficiently low temperatures under magnetic fields parallel to both the $ab$-plane and the c-axis in a paramagnetic/superconducting (PM/SC) phase of K$_x$Fe$_{2-y}$Se$_2$. The observation of anisotropy in the orbital part of the Knight shift results in the anisotropy of its spin part increasing on approaching the transition temperature. The anisotropy of the Korringa relation suggests the presence of the weak spin fluctuations with a finite wave vector $\bm{q}$, which induce the magnetic fluctuations along the ab-plane at the Se site. Such fluctuations do not correspond to the stripe $(π,0)$ correlation of the Fe moment observed in many Fe-based superconductors, and are not contradictory to weak $(π,π)$ correlations. The nuclear spin-lattice relaxation rate $1/T_1$ shows a field-independent $T_1T \sim const.$ behavior at low temperatures for $H \parallel ab$, which is attributed to the nonzero density of states at the Fermi level and can be explained by the sign-changing order parameter even for nodeless gaps. The temperature dependence of $1/T_1$ is reproduced well by nodeless models with two isotropic gaps or a single anisotropic gap. The obtained gap magnitude in the isotropic two-gap model is comparable to those obtained in the angle-resolved photoemission spectroscopy experiments.

cond-mat.supr-con↗
arXiv2012

BiS2 - based superconductivity in F-substituted NdOBiS2

We have successfully synthesized a new BiS2-based superconductor NdOBiS2 with F-doping. This compound is composed of superconducting BiS2 layers and blocking NdO layers, which indicates that the BiS2 layer is the one of the common superconducting layers like the CuO2 layer of cuprates or Fe-As layer of Fe-based superconductors. We can obtain NdO1-xFxBiS2 with bulk superconductivity by a solid-state reaction under ambient pressure. Therefore, NdO1-xFxBiS2 should be the suitable material to elucidate the mechanism of superconductivity in the BiS2-layer.

cond-mat.supr-con↗
arXiv2012

Electrodeposition as a new route to synthesize superconducting FeSe

We have successfully synthesized FeSe films by the electrochemical deposition in the electrolyte containing FeCl_{2}\cdot4H_{2}O, SeO_{2} and Na_{2}SO_{4}. The composition ratio of Fe and Se was controlled by the synthesis voltage and pH value. The FeSe film with the composition ratio of Fe : Se = 1 : 1 is fabricated at a voltage of -0.9 V and pH 2.1 in our electrochemical deposition. This sample has a highly crystalline tetragonal FeSe structure and exhibits a superconducting transition at 8.1 K, comparable to FeSe synthesized by other methods.

cond-mat.supr-con↗
arXiv2012

Unidirectional Electronic Structure in the Parent State of Iron-Chalcogenide Superconductor Fe$_{1+δ}$Te

We use scanning tunnelling microscopy and spectroscopy to explore the electronic structure of Fe$_{1.07}$Te which is the parent compound of the iron-chalcogenide superconductors. A unidirectional electronic structure with a period of $a_{0}$ (where $a_{0}$ is the lattice constant) along the a-axis is observed. The unidirectional pattern is visible within an energy range from approximately -200 to +130 meV. Since the direction of the unidirectional electronic structure coincides with those of the underlying antiferromagnetic and the predicted orbital orders, it is presumable that the observed unidirectional structure is closely tied to these orders and is peculiar to the parent state in iron-based superconductors.

cond-mat.str-el↗
arXiv2012

One-step synthesis of KxFe2-ySe2 single crystals for high critical current density

We have established a simple process that allows for the one-step synthesis of KxFe2-ySe2 single crystals, which exhibit high critical current density Jc. The post annealing and quenching technique has improved the homogeneity of as-grown crystals, resulting in full shielding of the external magnetic field. The quenched crystals show a superconducting transition at Tconset = 32.9 K and Tczero = 32.1 K. The upper critical fields μ_{0}Hc2(0) for H//ab and H//c are estimated to be ~206 and ~50 T, respectively. The critical current densities Jc for H//ab and H//c reach as high as 1.0\times10^{5} and 3.4\times10^{4} A/cm2 at 5 K. Furthermore, Jc exhibits a high field performance and a significantly weak temperature dependence up to 5 T, suggesting strong pinning. These results demonstrate that KxFe2-ySe2 would be a promising candidate material for practical applications.

cond-mat.supr-con↗
arXiv2012

Large local disorder in the superconducting K_{0.8}Fe_{1.6}Se_{2} studied by extended x-ray absorption fine structure

We have measured local structure of superconducting K_{0.8}Fe_{1.6}Se_{2} chalcogenide (T_{c}=31.8 K) by temperature dependent polarized extended x-ray absorption fine structure (EXAFS) at the Fe and Se K-edges. We find that the system is characterized by a large local disorder. The Fe-Se and Fe-Fe distances are found to be shorter than the distances measured by diffraction, while the corresponding mean square relative displacements reveal large Fe-site disorder and relatively large c-axis disorder. The local force constant for Fe-Se bondlength (k ~ 5.8 eV/Å^{2}) is similar to the one found in the binary FeSe superconductor, however, the Fe-Fe bondlength appears to get flexible (k ~ 2.1 eV/Å^{2}) in comparison to the binary FeSe (k ~ 3.5 eV/Å^{2}), an indication of partly relaxed Fe-Fe networks in K_{0.8}Fe_{1.6}Se_{2}. The results suggest glassy nature of the title system, with the superconductivity being similar to the one in the granular materials.

cond-mat.supr-con↗
arXiv2012

Enhancement of superconducting properties in FeSe wires using a quenching technique

Enhancements of superconducting properties were observed in FeSe wires using a quenching technique. Zero resistivity was achieved at about 10 K in quenched wires, which is about 2 K higher than that of polycrystalline FeSe bulk. Furthermore, transport Jc of quenched wires showed three times higher than that of furnace-cooled wires. In contrast, the quenched polycrystalline FeSe bulks did not show the enhancement of Tc. The quenching technique is a greatly promising for fabricating FeSe wires with high Tc and high Jc, and quenched FeSe wires have high potential for superconducting wire applications.

cond-mat.supr-con↗
arXiv2011

Electrochemical synthesis of iron-based superconductor FeSe films

The superconducting FeSe films were successfully fabricated using the electrochemical synthesis. The composition ratio of Fe and Se can be controlled by the electric potential and pH value. We found that the FeSe films deposited at the electric potential -1.75 V and pH 2.3 show the superconducting transition at 3.5 K. The establishment of this electrochemical synthesis technique will provide many advantages for application.

cond-mat.supr-con↗
arXiv2011

Linear magnetoresistivity in the ternary AM2B2 and A3Rh8B6 phases (A = Ca, Sr; M = Rh, Ir)

We studied the magnetoresistivity of the AM2B2 and A3Rh8B6 (A = Ca, Sr; M = Rh, Ir) compounds within the ranges 1.8<=T<=300 K and 0<=H<=50 kOe. The zero-field resistivity ρ0(T) is metallic and follows closely the Bloch-Grüneisen description. A positive, nonsaturating, and dominantly linear-in-H magnetoresistivity was observed in all samples, including the ones with a superconducting ground state. Such ΔρT(H)/ρT(0), reaching 1200% in favorable cases, was found to be much stronger for the AM2B2 compounds and to decrease with temperature as well as when Ca is replaced by Sr, or Rh is replaced by Ir. Finally, the general features of the observed magnetoresistivity will be discussed in terms of the Abrikosov model for the linear magnetoresistivity in inhomogeneous materials.

cond-mat.supr-con↗
arXiv2011

Intrinsic phase separation in superconducting K0.8Fe1.6Se2 (Tc= 31.8 K) single crystals

Temperature dependent single-crystal x-ray diffraction (XRD) in transmission mode probing the bulk of the newly discovered K0.8Fe1.6Se2 superconductor (Tc = 31.8 K) using synchrotron radiation is reported. A clear evidence of intrinsic phase separation at 520 K between two competing phases, (i) a first majority magnetic phase with a ThCr2Si2-type tetragonal lattice modulated by the iron vacancy ordering and (ii) a minority non-magnetic phase having an in-plane compressed lattice volume and a weak superstructure, is reported. The XRD peaks due to the Fe vacancy ordering in the majority phase disappear by increasing the temperature at 580 K, well above phase separation temperature confirming the order-disorder phase transition. The intrinsic phase separation at 520K between a competing first magnetic phase and a second non-magnetic phase in the normal phase both having lattice superstructures (that imply different Fermi surface topology reconstruction and charge density) is assigned to a lattice-electronic instability of the K0.8Fe1.6Se2 system typical of a system tuned at a Lifshitz critical point of an electronic topological transition that gives a multi-gaps superconductor tuned a shape resonance.

cond-mat.supr-con↗
arXiv2011

Possible Superconducting Symmetry and Magnetic Correlations in K0.8Fe2Se2: A 77Se-NMR Study

We report ^77Se-NMR measurements in the recent discovered K_0.8Fe_2Se_2 with the superconducting transition temperature T_c=32 K. The characteristic point of this system is that the high density of state is located in the vicinity of the Fermi level. The comparison between Knight shift and nuclear spin lattice relaxation rate 1/T_1 shows that the antiferromagnetic spin correlation is not strong in this system, but it is reasonable to consider that its development toward low temperatures occurs. 1/T_1 in the superconducting state can be reproduced well by an s+- wave model, but a d wave model also roughly reproduces the data. Non exponential behavior in 1/T_1 at low temperatures disagrees with a single isotropic gap.

cond-mat.supr-con↗
arXiv2011

A New Noncentrosymmetric Superconducting Phase in the Li-Rh-B System

Superconductivity, at 2-3 K, was observed in a novel phase of the ternary Li-Rh-B system. The structural phase exhibits a large noncentrosymmetric cubic unit cell with the a-parameter being within 1.208 \leq a \leq 1.215 nm. This phase is stable over a wider compositional range of LixRhBy (0.6 < x < 2, 1 < y < 2). The superconductivity, as well as the unit cell volume, is sensitive to the Li/B content but it is manifested with Tc \geq 1.8 K over a wider compositional range: the highest Tc \approx 3 K occurs for x : y \approx 0.9:1.5 with a \approx 1.209 nm. The superconducting shielding fraction of most samples is almost 80% of that of Sn. The lower critical field, Hc1(0), is ~65 Oe while the upper one, Hc2(0) is determined from extrapolation to be higher than 14 kOe. We discuss the influence of pressure on Tc and also the influence of the lack of inversion symmetry on the superconducting properties.

cond-mat.supr-con↗