arXiv subjects

Hong Ren

Publications and source records attributed to Hong Ren.

At least 37 records · Page 2Linked to original sources

arXiv2026

A BEV-Fusion Based Framework for Sequential Multi-Modal Beam Prediction in mmWave Systems

Beam prediction is critical for reducing beam-training overhead in millimeter-wave (mmWave) systems, especially in high-mobility vehicular scenarios. This paper presents a BEV-Fusion based framework that unifies camera, LiDAR, radar, and GPS modalities in a shared bird's-eye-view (BEV) representation for spatially consistent multi-modal fusion. Unlike priorapproaches that fuse globally pooled one-dimensional features, the proposed method performs fusion in BEV space to preservecross-modal geometric structure and visual semantic density. A learned camera-to-BEV module based on cross-attention is adopted to generate BEV-aligned visual features without relying on precise camera calibration, and a temporal transformer is used to aggregate five-step sequential observations for motion-aware beam prediction. Experiments on the DeepSense 6G benchmark show that BEV-Fusion achieves approximately 87% distance- based accuracy (DBA) on scenarios 32, 33 and 34, outperforming the TransFuser baseline. These results indicate that BEV-space fusion provides an effective spatial abstraction for sensing-assisted beam prediction.

eess.SP↗

arXiv2026

Mutual Coupling Aware Channel Estimation for RIS-Aided Multi-User mmWave Systems

This paper proposes a three-stage uplink channel estimation protocol for reconfigurable intelligent surface (RIS)-aided multi-user (MU) millimeter-wave (mmWave) multiple-input single-output (MISO) systems, where both the base station (BS) and the RIS are equipped with uniform planar arrays (UPAs). The proposed approach explicitly accounts for the mutual coupling (MC) effect, modeled via scattering parameter multiport network theory. In Stage~I, a dimension-reduced subspace-based method is proposed to estimate the common angle of arrival (AoA) at the BS using the received signals across all users. In Stage~II, MC-aware cascaded channel estimation is performed for a typical user. The equivalent measurement vectors for each cascaded path are extracted and the reference column is reconstructed using a compressed sensing (CS)-based approach. By leveraging the structure of the cascaded channel, the reference column is rearranged to estimate the AoA at the RIS, thereby reducing the computational complexity associated with estimating other columns. Additionally, the common angle of departure (AoD) at the RIS is also obtained in this stage, which significantly reduces the pilot overhead for estimating the cascaded channels of other users in Stage~III. The RIS phase shift training matrix is designed to optimize performance in the presence of MC and outperforms random phase scheme. Simulation results validate that the proposed method yields better performance than the MC-unaware and existing approaches in terms of estimation accuracy and pilot efficiency.

eess.SP↗

arXiv2025

WiFi-based Cross-Domain Gesture Recognition Using Attention Mechanism

While fulfilling communication tasks, wireless signals can also be used to sense the environment. Among various types of sensing media, WiFi signals offer advantages such as widespread availability, low hardware cost, and strong robustness to environmental conditions like light, temperature, and humidity. By analyzing Wi-Fi signals in the environment, it is possible to capture dynamic changes of the human body and accomplish sensing applications such as gesture recognition. Although many existing gesture sensing solutions perform well in-domain but lack cross-domain capabilities (i.e., recognition performance in untrained environments). To address this, we extract Doppler spectra from the channel state information (CSI) received by all receivers and concatenate each Doppler spectrum along the same time axis to generate fused images with multi-angle information as input features. Furthermore, inspired by the convolutional block attention module (CBAM), we propose a gesture recognition network that integrates a multi-semantic spatial attention mechanism with a self-attention-based channel mechanism. This network constructs attention maps to quantify the spatiotemporal features of gestures in images, enabling the extraction of key domain-independent features. Additionally, ResNet18 is employed as the backbone network to further capture deep-level features. To validate the network performance, we evaluate the proposed network on the public Widar3 dataset, and the results show that it not only maintains high in-domain accuracy of 99.72%, but also achieves high performance in cross-domain recognition of 97.61%, significantly outperforming existing best solutions.

cs.CV↗

arXiv2025

A Cyclic Shift Embedded Pilot based Channel Estimation for Multi-User MIMO-OTFS systems with fractional delay and Doppler

Orthogonal time frequency space (OTFS) modulation has been proposed to meet the demand for reliable communication in high-mobility scenarios for future wireless networks. However, in multi-user OTFS systems, conventional embedded pilot schemes require independent pilot allocation for each user, leading to linearly increasing pilot overhead. To address these issues, in this paper, we investigate the uplink channel estimation and pilot design for multi-user multiple-input multiple-output (MIMO)-OTFS systems. We propose a multi-dimensional decomposition-based channel estimation algorithm. Specifically, the proposed algorithm first estimates the angles of arrivals (AoAs) via subspace decomposition-based method. A spatial projection matrix, constructed from the estimated AOAs, decouples the received signal by propagation path subspace, effectively mitigating inter-path interference. The remaining fractional delay and Doppler can be obtained by a compressed sensing (CS)-based off-grid channel estimation method. Furthermore, to reduce the pilot overhead in multi-user OTFS systems, this paper proposes a novel cyclic shift embedded pilot (CSEP) structure, which can reuse users through cyclic shift-orthogonality of Zadoff-Chu (ZC) sequences. Compared with conventional embedded pilot structures, the CSEP structure can save over 30\% of pilot overhead. Finally, an imporved channel estimation method based on the CSEP structure is proposed. Simulation results demonstrate that it achieves superior performance in channel estimation. Moreover, the proposed CSEP structure and channel estimation algorithm achieve a favorable balance between computational complexity, estimation accuracy, and bit error rate (BER) performance.

cs.IT↗

arXiv2025

Channel Estimation for RIS-Aided MU-MIMO mmWave Systems with Direct Channel Links

In this paper, we propose a three-stage unified channel estimation strategy for reconfigurable intelligent surface (RIS)-aided multi-user (MU) multiple-input multiple-output (MIMO) millimeter wave (mmWave) systems with the existence of the direct channels, where the base station (BS), the users and the RIS are equipped with uniform planar array (UPA). The effectiveness of the developed three-stage strategy stems from the careful design of both the pilot signal sequence of the users and the vectors of RIS. Specifically, in Stage I, the cascaded channel components are eliminated by configuring the RIS phase shift vectors with a π difference to estimate the direct channels for all users. The orthogonal subspace projection is employed in Stage II to obtain equivalent signal matrices, enabling the estimation of angles of departure (AoDs) of the user-RIS channel for all users. In Stage III, we combine the signals of the time slots with the same pilots and project obtained measurement matrix to the orthogonal complement space of the component consisting of the portion of the direct channel, which removes the direct components and thus prevents error propagation from the direct channels to the cascaded channels. Then, we estimate the angles of arrival (AoAs) of the RIS-BS channel and remaining parameters of the cascaded channel for all users by exploiting the sparsity and correlation in the obtained equivalent matrices. Simulation results demonstrate that the proposed method yields better estimation performance than the existing methods.

eess.SP↗

arXiv2025

Theoretical and Empirical Study of Spatial Power Focusing Effect for Sparse Arrays at Terahertz Band

This work investigates the spatial power focusing effect for large-scale sparse arrays at terahertz (THz) band, combining theoretical analysis with experimental validation. Specifically, based on a Green's function channel model, we analyze the power distribution along the $z$-axis, deriving a closed-form expression to characterize the focusing effect. Furthermore, the factors influencing the focusing effect, including phase noise and positional deviations, are theoretically analyzed and numerically simulated. Finally, a 300 GHz measurement platform based on a vector network analyzer (VNA) is constructed for experimental validation. The measurement results demonstrate close consistence with theoretical simulation results, confirming the spatial power focusing effect for sparse arrays.

eess.SP↗

arXiv2025

Cooperative Bistatic ISAC Systems for Low-Altitude Economy

The burgeoning low-altitude economy (LAE) necessitates integrated sensing and communication (ISAC) systems capable of high-accuracy multi-target localization and velocity estimation under hardware and coverage constraints inherent in conventional ISAC architectures. This paper addresses these challenges by proposing a cooperative bistatic ISAC framework within MIMO-OFDM cellular networks, enabling robust sensing services for LAE applications through standardized 5G New Radio (NR) infrastructure. We first develop a low-complexity parameter extraction algorithm employing CANDECOMP/PARAFAC (CP) tensor decomposition, which exploits the inherent Vandermonde structure in delay-related factor matrices to efficiently recover bistatic ranges, Doppler velocities, and angles-of-arrival (AoA) from multi-dimensional received signal tensors. To resolve data association ambiguity across distributed transmitter-receiver pairs and mitigate erroneous estimates, we further design a robust fusion scheme based on the minimum spanning tree (MST) method, enabling joint 3D position and velocity reconstruction. Comprehensive simulation results validate the framework's superiority in computational efficiency and sensing performance for low-altitude scenarios.

eess.SP↗

arXiv2025

A Two-Stage ISAC Framework for Low-Altitude Economy Based on 5G NR Signals

The evolution of next-generation wireless networks has spurred the vigorous development of the low-altitude economy (LAE). To support this emerging field while remaining compatible with existing network architectures, integrated sensing and communication (ISAC) based on 5G New Radio (NR) signals is regarded as a promising solution. However, merely leveraging standard 5G NR signals, such as the Synchronization Signal Block (SSB), presents fundamental limitations in sensing resolution. To address the issue, this paper proposes a two-stage coarse-to-fine sensing framework that utilizes standard 5G NR initial access signals augmented by a custom-designed sparse pilot structure (SPS) for high-precision unmanned aerial vehicles (UAV) sensing. In Stage I, we first fuse information from the SSB, Type\#0-PDCCH, and system information block 1 (SIB1) to ensure the initial target detection. In Stage II, a refined estimation algorithm is introduced to overcome the resolution limitations of these signals. Inspired by the sparse array theory, this stage employs a novel SPS, which is inserted into resource blocks (RBs) within the CORSET\#0 bandwidth. To accurately extract the off-grid range and velocity parameters from these sparse pilots, we develop a corresponding high-resolution algorithm based on the weighted unwrapped phase (WUP) technique and the RELAX-based iterative method. Finally, the density-based spatial clustering of applications with noise (DBSCAN) algorithm is adopted to prune the redundant detections arising from beam overlap. Comprehensive simulation results demonstrate the superior estimation accuracy and computational efficiency of the proposed framework in comparison to other techniques.

eess.SP↗

arXiv2025

4D Imaging in ISAC Systems: A Framework Based on 5G NR Downlink Signals

Integrated sensing and communication (ISAC) has emerged as a key enabler for sixth-generation (6G) wireless networks, supporting spectrum sharing and hardware integration. Beyond communication enhancement, ISAC also enables high-accuracy environment reconstruction and imaging, which are crucial for applications such as autonomous driving and digital twins. This paper proposes a 4D imaging framework fully compliant with the 5G New Radio (NR) protocol, ensuring compatibility with cellular systems. Specifically, we develop an end-to-end processing chain that covers waveform generation, echo processing, and multi-BS point cloud fusion. Furthermore, we introduce Zoom-OMP, a coarse-to-fine sparse recovery algorithm for high-resolution angle estimation that achieves high accuracy with reduced computational cost. The simulation results demonstrate that the proposed framework achieves robust 4D imaging performance with superior spatial accuracy and reconstruction quality compared to conventional benchmarks, paving the way for practical ISAC-enabled environment reconstruction in 6G networks.

eess.SP↗

arXiv2025

UAV SAR Imaging with 5G NR OFDM Signals in NLOS Environments

The integration of sensing and communication (ISAC) has significant potential for future wireless systems, enabling efficient spectrum utilization and novel application scenarios. In this paper, we propose a cooperative ISAC framework for synthetic aperture radar (SAR) imaging by leveraging orthogonal frequency division multiplexing (OFDM) communication signals. We address the challenge of severe imaging degradation in non-line-of-sight (NLOS) environments under the QUAsi Deterministic RadIo channel GenerAtor (QuaDRiGa). To detect weak signals and eliminate false points, we develop a two-stage compressed sensing-space alternating generalized expectation maximization (CS-SAGE) scheme for high-precision scatterer localization. In stage I, orthogonal matching pursuit (OMP) is employed for coarse estimation to identify the approximate locations of dominant scatterers. Then, the SAGE algorithm in stage II performs fine estimation to accurately extract scatterer parameters. Simulation results validate the effectiveness of the proposed cooperative ISAC framework, and provide valuable insights for practical system design.

eess.SP↗

arXiv2025

Large-Model AI for Near Field Beam Prediction: A CNN-GPT2 Framework for 6G XL-MIMO

The emergence of extremely large-scale antenna arrays (ELAA) in millimeter-wave (mmWave) communications, particularly in high-mobility scenarios, highlights the importance of near-field beam prediction. Unlike the conventional far-field assumption, near-field beam prediction requires codebooks that jointly sample the angular and distance domains, which leads to a dramatic increase in pilot overhead. Moreover, unlike the far-field case where the optimal beam evolution is temporally smooth, the optimal near-field beam index exhibits abrupt and nonlinear dynamics due to its joint dependence on user angle and distance, posing significant challenges for temporal modeling. To address these challenges, we propose a novel Convolutional Neural Network-Generative Pre-trained Transformer 2 (CNN-GPT2) based near-field beam prediction framework. Specifically, an uplink pilot transmission strategy is designed to enable efficient channel probing through widebeam analog precoding and frequency-varying digital precoding. The received pilot signals are preprocessed and passed through a CNN-based feature extractor, followed by a GPT-2 model that captures temporal dependencies across multiple frames and directly predicts the near-field beam index in an end-to-end manner.

eess.SP↗

arXiv2025

From Active to Battery-Free: Rydberg Atomic Quantum Receivers for Self-Sustained SWIPT-MIMO Networks

In this paper, we proposed a hybrid simultaneous wireless information and power transfer (SWIPT)-enabled multiple-input multiple-output (MIMO) architecture, where the base station (BS) uses a conventional RF transmitter for downlink transmission and a Rydberg atomic quantum receiver (RAQR) for receiving uplink signal from Internet of Things (IoT) devices. To fully exploit this integration, we jointly design the transmission scheme and the power-splitting strategy to maximize the sum rate, which leads to a non-convex problem. To address this challenge, we first derive closed-form lower bounds on the uplink achievable rates for maximum ratio combining (MRC) and zero-forcing (ZF), as well as on the downlink rate and harvested energy for maximum ratio transmission (MRT) and ZF precoding. Building upon these bounds, we propose an iterative algorithm relying on the best monomial approximation and geometric programming (GP) to solve the non-convex problem. Finally, simulations validate the tightness of our derived lower bounds and demonstrate the superiority of the proposed algorithm over benchmark schemes. Importantly, by integrating RAQR with SWIPT-enabled MIMO, the BS can reliably detect weak uplink signals from IoT devices powered only by harvested energy, enabling battery-free communication.

eess.SP↗

arXiv2025

Exploring the Advantages of Sparse Arrays in Near-Field XL-MIMO Systems: Beam Analysis and EDoF Function

This paper investigates near-field XL-MIMO systems with sparse uniform planar arrays (UPAs). Based on the Green's function-based channel model, the paper derives closed-form expressions for the signal beam power when the distance coordinate or the angular coordinates varies with respective to the focused position. Based on that, closed-form expressions for the lobe length and the suppressing ratio are obtained, indicating that both the distance-focusing property and the grating lobe behavior can be enhanced as the focal distance decreases or the antenna spacing increases. Furthermore, the paper introduces a crucial constraint on system parameters, under which effective degrees-of-freedom (EDoF) of XL-MIMO systems with sparse UPAs can be precisely estimated. Then, the paper proposes an algorithm to obtain a closed-form expression, which can estimate EDoF with high accuracy and low computational complexity. The numerical results verifies the correctness of the main results of this paper.

eess.SP↗

arXiv2025

Cooperative Sensing and Communication Beamforming Design for Low-Altitude Economy

To empower the low-altitude economy with high-accuracy sensing and high-rate communication, this paper proposes a cooperative integrated sensing and communication (ISAC) framework for aerial-ground networks. In the proposed system, the ground base stations (BSs) cooperatively serve the unmanned aerial vehicles (UAVs), which are equipped for either joint communication and sensing or sensing-only operations. The BSs employ coordinated beamforming to simultaneously transmit communication and sensing signals, while the UAVs execute their missions. To maximize the weighted sum rate under the sensing signal-to-interference-plus-noise ratio (SINR) constraints, we jointly optimize the transmit beamforming, receive filtering, and UAV trajectory. The resulting non-convex problem is solved using an alternating optimization framework incorporating semidefinite relaxation (SDR) and successive convex approximation (SCA). Simulation results demonstrate that the proposed joint design achieves higher communication throughput while ensuring required sensing robustness. Additionally, the sensing SINR threshold and the UAV altitude have a significant impact on the trajectory design, highlighting the necessity of adaptive deployment strategies in practical applications.

eess.SY↗

arXiv2025

Performance Analysis of Cooperative Integrated Sensing and Communications for 6G Networks

In this work, we aim to effectively characterize the performance of cooperative integrated sensing and communication (ISAC) networks and to reveal how performance metrics relate to network parameters. To this end, we introduce a generalized stochastic geometry framework to model the cooperative ISAC networks, which approximates the spatial randomness of the network deployment. Based on this framework, we derive analytical expressions for key performance metrics in both communication and sensing domains, with a particular focus on communication coverage probability and radar information rate. The analytical expressions derived explicitly highlight how performance metrics depend on network parameters, thereby offering valuable insights into the deployment and design of cooperative ISAC networks. In the end, we validate the theoretical performance analysis through Monte Carlo simulation results. Our results demonstrate that increasing the number of cooperative base stations (BSs) significantly improves both metrics, while increasing the BS deployment density has a limited impact on communication coverage probability but substantially enhances the radar information rate. Additionally, increasing the number of transmit antennas is effective when the total number of transmit antennas is relatively small. The incremental performance gain reduces with the increase of the number of transmit antennas, suggesting that indiscriminately increasing antennas is not an efficient strategy to improve the performance of the system in cooperative ISAC networks.

eess.SP↗

arXiv2025

Modular XL-Array-Enabled 3-D Localization based on Hybrid Spherical-Planar Wave Model in Terahertz Systems

This work considers the three-dimensional (3-D) positioning problem in a Terahertz (THz) system enabled by a modular extra-large (XL) array with sub-connected architecture. Our purpose is to estimate the Cartesian Coordinates of multiple user equipments (UEs) with the received signal of the RF chains while considering the spatial non-stationarity (SNS). We apply the hybrid spherical-planar wave model (HSPWM) as the channel model owing to the structual feature of the modular array, and propose a 3-D localization algorithm with relatively high accuracy and low complexity. Specifically, we first distinguish the visible sub-arrays (SAs) located in the VR and estimate the angles-of-arrival (AoAs) from each UE to typical visible SAs with the largest receive power via compressed sensing (CS) method. In addition, we apply the weighted least square (WLS) method to obtain a coarse 3-D position estimation of each UE according to the AoA estimations. Then, we estimate the AoAs of the other SAs with a reduced dictionary (RD)-CS-based method for lower computational complexity, and utilize all the efficient AoA estimations to derive a fine position estimation. Simulation results indicate that the proposed positioning framework based on modular XL-array can achieve satisfactory accuracy with evident reduction in complexity. Furthermore, the deployment of SAs and the allocation of antenna elements need to be specially designed for better positioning performance.

eess.SP↗

arXiv2025

Uplink Transmission Design for Fluid Antenna-Enabled Multiuser MIMO Systems with Imperfect CSI

This paper investigates a two-timescale uplink transmission framework for a fluid antenna-enabled multiuser multi-input multi-output system (MIMO-FAS). Antenna positions are optimized based on statistical channel state information (CSI), while beamforming vectors at the base station (BS) adapt to instantaneous CSI. Under a Rician fading channel with imperfect CSI, we establish a linear minimum mean square error (LMMSE)-based channel estimation approach and derive a closed-form expression for the achievable uplink rate using a low-complexity maximal-ratio-combining (MRC) detector. The optimization problem is formulated as a minimum user rate maximization problem by optimizing the fluid antenna positions, subject to the feasible region and the minimum spacing distance constraints. To address this non-convex problem, a genetic algorithm (GA) method is proposed, encoding antenna configurations as population individuals. Additionally, an accelerated gradient ascent algorithm is proposed to enhance computational efficiency. Numerical results validate the mathematical derivations and demonstrate that the proposed two-timescale transmission strategy significantly outperforms traditional FPA systems, with both algorithms achieving enhanced gains.

eess.SP↗

arXiv2025

Channel Estimation for RIS-Aided MU-MIMO mmWave Systems with Practical Hybrid Architecture

This paper proposes a correlation-based three-stage channel estimation strategy with low pilot overhead for reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) multi-user (MU) MIMO systems, in which both users and base station (BS) are equipped with a hybrid RF architecture. In Stage I, all users jointly transmit pilots and recover the uncompressed received signals to estimate the angle of arrival (AoA) at the BS using the discrete Fourier transform (DFT). Based on the observation that the overall cascaded MIMO channel can be decomposed into multiple sub-channels, the cascaded channel for a typical user is estimated in Stage II. Specifically, using the invariance of angles and the linear correlation of gains related to different cascaded subchannels, we use compressive sensing (CS), least squares (LS), and a one-dimensional search to estimate the Angles of Departure (AoDs), based on which the overall cascaded channel is obtained. In Stage III, the remaining users independently transmit pilots to estimate their individual cascaded channel with the same approach as in Stage II, which exploits the equivalent common RIS-BS channel obtained in Stage II to reduce the pilot overhead. In addition, the hybrid combining matrix and the RIS phase shift matrix are designed to reduce the noise power, thereby further improving the estimation performance. Simulation results demonstrate that the proposed algorithm can achieve high estimation accuracy especially when the number of antennas at the users is small, and reduce pilot overhead by more than five times compared with the existing benchmark approach.

eess.SP↗