arXiv subjects

Hong X. Tang

Publications and source records attributed to Hong X. Tang.

At least 73 records · Page 4Linked to original sources

arXiv2020

Noiseless photonic non-reciprocity via optically-induced magnetization

The realization of optical non-reciprocity is crucial for many device applications, and also of fundamental importance for manipulating and protecting the photons with desired time-reversal symmetry. Recently, various new mechanisms of magnetic-free non-reciprocity have been proposed and implemented, avoiding the limitation of the strong magnetic field imposed by the Faraday effect. However, due to the difficulties in suppressing the drive and its induced noises, these devices exhibit limited isolation performances and leave the quantum noise properties rarely studied. Here, we demonstrate a new approach of magnetic-free non-reciprocity by optically induced magnetization in an atom ensemble. Excellent isolation of signal (highest isolation ratio is 51.4 dB) is observed over a power dynamic range of 7 orders of magnitude, with the noiseless property verified by quantum statistics measurement. The approach is applicable to other atoms and atom-like emitters in solids, paving the way for future studies of integrated photonic non-reciprocal devices, unidirectional quantum storage and state transfer, as well as topological photonics technologies.

physics.optics↗

arXiv2020

Towards 1% single photon nonlinearity with periodically-poled lithium niobate microring resonators

The absence of the single-photon nonlinearity has been a major roadblock in developing quantum photonic circuits at optical frequencies. In this paper, we demonstrate a periodically-poled thin film lithium niobate microring resonator (PPLNMR) that reaches 5,000,000%/W second harmonic conversion efficiency---almost 20-fold enhancement over the state-of-the-art---by accessing its largest $χ^{(2)}$ tensor component $d_{33}$ via quasi-phase matching. The corresponding single photon coupling rate $g/2π$ is estimated to be 1.2 MHz, which is an important milestone as it approaches the dissipation rate $κ/2π$ of best available lithium niobate microresonators developed in the community. Using a figure of merit defined as $g/κ$, our devices reach a single photon nonlinearity approaching 1%. We show that, by further scaling of the device, it is possible to improve the single photon nonlinearity to a regime where photon-blockade effect can be manifested.

physics.optics↗

arXiv2020

Epitaxial niobium nitride superconducting nanowire single-photon detectors

Superconducting nanowires used in single-photon detectors have been realized on amorphous or poly-crystalline films. Here, we report the use of single-crystalline NbN thin films for superconducting nanowire single-photon detectors (SNSPDs). Grown by molecular beam epitaxy (MBE) at high temperature on nearly lattice-matched AlN-on-sapphire substrates, the NbN films exhibit high degree of uniformity and homogeneity. Even with relatively thick films, the fabricated nanowire detectors show saturated internal efficiency at near-IR wavelengths, demonstrating the potential of MBE-grown NbN for realizing large arrays of on-chip SNSPDs and their integration with AlN-based $χ^{(2)}$ quantum photonic circuits.

physics.app-ph↗

arXiv2020

Waveguide cavity optomagnonics for broadband multimode microwave-to-optics conversion

Cavity optomagnonics has emerged as a promising platform for studying coherent photon-spin interactions as well as tunable microwave-to-optical conversion. However, current implementation of cavity optomagnonics in ferrimagnetic crystals remains orders of magnitude larger in volume than state-of-the-art cavity optomechanical devices, resulting in very limited magneto-optical interaction strength. Here, we demonstrate a cavity optomagnonic device based on integrated waveguides and its application for microwave-to-optical conversion. By designing a ferrimagnetic rib waveguide to support multiple magnon modes with maximal mode overlap to the optical field, we realize a high magneto-optical cooperativity which is three orders of magnitude higher compared to previous records obtained on polished YIG spheres. Furthermore, we achieve tunable conversion of microwave photons at around 8.45 GHz to 1550 nm light with a broad conversion bandwidth as large as 16.1 MHz. The unique features of the system point to novel applications at the crossroad between quantum optics and magnonics.

cond-mat.mes-hall↗

arXiv2020

Magnon-photon strong coupling for tunable microwave circulators

We present a generic theoretical framework to describe non-reciprocal microwave circulation in a multimode cavity magnonic system and assess the optimal performance of practical circulator devices. We show that high isolation (> 56 dB), extremely low insertion loss (< 0.05 dB), and flexible bandwidth control can be potentially realized in high-quality-factor superconducting cavity based magnonic platforms. These circulation characteristics are analyzed with materials of different spin densities. For high-spin-density materials such as yttrium iron garnet, strong coupling operation regime can be harnessed to obtain a broader circulation bandwidth. We also provide practical design principles for a highly integratible low-spin-density material (vanadium tetracyanoethylene) for narrow-band circulator operation, which could benefit noise-sensitive quantum microwave measurements. This theory can be extended to other coupled systems and provide design guidelines for achieving tunable microwave non-reciprocity for both classical and quantum applications.

physics.app-ph↗

arXiv2020

Probabilistic vortex crossing criterion for superconducting nanowire single-photon detectors

Superconducting nanowire single-photon detectors have emerged as a promising technology for quantum metrology from the mid-infrared to ultra-violet frequencies. Despite the recent experimental successes, a predictive model to describe the detection event in these detectors is needed to optimize the detection metrics. Here, we propose a probabilistic criterion for single-photon detection based on single-vortex (flux quanta) crossing the width of the nanowire. Our model makes a connection between the dark-counts and photon-counts near the detection threshold. The finite-difference calculations demonstrate that a change in the bias current distribution as a result of the photon absorption significantly increases the probability of single-vortex crossing even if the vortex potential barrier has not vanished completely. We estimate the instrument response function and show that the timing uncertainty of this vortex tunneling process corresponds to a fundamental limit in timing jitter of the click event. We demonstrate a trade-space between this intrinsic (quantum) timing jitter, quantum efficiency, and dark count rate in TaN, WSi, and NbN superconducting nanowires at different experimental conditions. Our detection model can also explain the experimental observation of exponential decrease in the quantum efficiency of SNSPDs at lower energies. This leads to a pulse-width dependency in the quantum efficiency, and it can be further used as an experimental test to compare across different detection models.

physics.ins-det↗

arXiv2020

Cavity piezo-mechanics for superconducting-nanophotonic quantum interface

Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10-GHz phonons are resonantly coupled with photons in a superconducting and a nanophotonic cavities at the same time. Benefited from the achieved large piezo-mechanical cooperativity ($C_\mathrm{em}\sim7$) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.

physics.optics↗

arXiv2020

Design of micron-long superconducting nanowire perfect absorber for efficient high speed single-photon detection

Despite very efficient superconducting nanowire single-photon detectors (SNSPDs) reported recently, combining their other performance advantages such as high speed and ultra-low timing jitter in a single device still remains challenging. In this work, we present a perfect absorber model and corresponding detector design based on a micron-long NbN nanowire integrated with a 2D-photonic crystal cavity of ultra-small mode volume, which promises simultaneous achievement of near-unity absorption, gigahertz counting rates and broadband optical response with a 3 dB bandwidth of 71 nm. Compared to previous stand-alone meandered and waveguide-integrated SNSPDs, this perfect absorber design addresses the trade space in size, efficiency, speed and bandwidth for realizing large on-chip single-photon detector arrays.

physics.optics↗

arXiv2020

Microwave--Optical entanglement in a Strongly Coupled Electro-Optomechanical System

Quantum transduction between microwave and optics can be realized by quantum teleportation if given reliable microwave-optical entanglement, namely entanglement-based quantum transduction. To realize this protocol, an entangled source with high-fidelity between the two frequencies is necessary. In this paper, we study the microwave and optical entanglement generation based on a generic cavity electro-optomechanical system in the strong coupling regime. Splittings are shown in the microwave and optical output spectra and the frequency entanglement between the two modes is quantified. We show that entanglement can be straightforwardly encoded in the frequency-bin degree of freedom and propose a feasible experiment to verify entangled photon pairs. The experimental implementation is systematically analyzed, and the preferable parameter regime for entanglement verification is identified. An inequality is given as a criterion for good entanglement verification with analysis of practical imperfections.

quant-ph↗

arXiv2019

Lithium-Niobate-on-Insulator Waveguide-Integrated Superconducting Nanowire Single-Photon Detectors

We demonstrate waveguide-integrated superconducting nanowire single-photon detectors on thin-film lithium niobate (LN). Using a 250 um-long NbN superconducting nanowire lithographically defined on top of a 125 um-long LN nanowaveguide, on-chip detection efficiency of 46% is realized with simultaneous high performance in dark count rate and timing jitter. As LN possesses high second-order nonlinear \c{hi}(2) and electro-optic properties, an efficient single-photon detector on thin-film LN opens up the possibility to construct small scale fully-integrated quantum photonic chip which includes single-photon sources, filters, tunable quantum gates and detectors.

physics.app-ph↗

arXiv2019

Incorporation of erbium ions into thin-film lithium niobate integrated photonics

As an active material with favorable linear and nonlinear optical properties, thin-film lithium niobate has demonstrated its potential in integrated photonics. Integration with rare-earth ions, which are promising candidates for quantum memories and transducers, will enrich the system with new applications in quantum information processing. Here, we investigate the optical properties at 1.5 micron wavelengths of rare-earth ions (Er$^{3+}$) implanted in thin-film lithium niobate waveguides and micro-ring resonators. Optical quality factors near a million after post annealing show that ion implantation damage can be successfully repaired. The transition linewidth and fluorescence lifetime of erbium ions are characterized, revealing values comparable to bulk-doped crystals. The ion-cavity coupling is observed through a Purcell enhanced fluorescence, from which a Purcell factor of ~3.8 is extracted. This platform is compatible with top-down lithography processes and leads to a scalable path for controlling spin-photon interfaces in photonic circuits.

physics.optics↗

arXiv2019

Tunable telecom to mid-infrared optical parametric oscillation via microring-based $χ^{(3)}$ nonlinearities

Optical parametric oscillation (OPO) with far-shifted frequency sidebands has attracted significant interests in precision spectroscopy and quantum information processing. Microresonator based OPO sources hold the advantages of miniaturized footprint and versatile dispersion engineering. Here we demonstrate large-frequency-shifted $χ^{(3)}$-based OPO from crystalline aluminum nitride microrings pumped at $\sim$2 $μ$m in the normal dispersion regime. OPO in the telecom and mid-infrared bands with a frequency separation of 65.5 THz is achieved. The OPO frequency can be agilely tuned in the ranges of 10, 1 and 0.1 THz respectively by tailoring the microring dimensions, shifting the pump wavelength, and controlling the chip temperature. At high intracavity pump powers, the OPO sidebands further evolve into localized frequency comb lines. Such telecom to mid-infrared OPO with flexible wavelength tunability will lead to enhanced chip-scale light sources.

physics.app-ph↗

arXiv2019

Superconducting nanowire single-photon detectors fabricated from atomic-layer-deposited NbN

High-quality ultra-thin films of niobium nitride (NbN) are developed by plasma-enhanced atomic layer deposition (PEALD) technique. Superconducting nanowire single-photon detectors (SNSPDs) patterned from this material exhibit high switching currents and saturated internal efficiencies over a broad bias range at 1550 nm telecommunication wavelength. Statistical analyses on hundreds of fabricated devices show near-unity throughput yield due to exceptional homogeneity of the films. The ALD-NbN material represents an ideal superconducting material for fabricating large single-photon detector arrays combining high efficiency, low jitter, low dark counts.

physics.app-ph↗

arXiv2019

Beyond 100 THz-spanning ultraviolet frequency combs in a non-centrosymmetric crystalline waveguide

Ultraviolet frequency combs enable applications ranging from precision spectroscopy to atomic clocks by addressing the electronic transitions of atoms and molecules. Access to ultraviolet light via integrated nonlinear optics is usually hampered by the strong material dispersion and large waveguide attention in the ultraviolet region. Here we demonstrate a simple route to chip-scale ultraviolet comb generators, simultaneously showing a gap-free frequency span of ~128 terahertz and supercontinuum sourced by an ultrafast fiber laser. The simultaneous cubic and quadratic nonlinear processes are implemented in single-crystalline aluminum nitride thin films, where a chirp-modulated taper waveguide is patterned to ensure a broad phase matching. The heterodyne beatnote characterization suggests that both the near-visible and ultraviolet supercontinuum combs maintain a high degree of coherence. Our approach is also adaptable to other non-centrosymmetric photonic platforms for ultrafast nonlinear optics with scalable bandwidth.

physics.optics↗

arXiv2019

Periodically poled thin film lithium niobate microring resonators with a second-harmonic generation efficiency of 250,000%/W

Lithium niobate (LN), dubbed by many as the silicon of photonics, has recently risen to the forefront of chip-scale nonlinear optics research since its demonstration as an ultralow-loss integrated photonics platform. Due to its significant quadratic nonlinearity ($χ^{(2)}$), LN inspires many important applications such as second-harmonic generation (SHG), spontaneous parametric down-conversion, and optical parametric oscillation. Here, we demonstrate high-efficiency SHG in dual-resonant, periodically poled z-cut LN microrings, where quasi-phase matching is realized by field-assisted domain engineering. Meanwhile, dual-band operation is accessed by optimizing the coupling conditions in fundamental and second-harmonic bands via a single pulley waveguide. As a result, when pumping a periodically poled LN microring in the low power regime at around 1617nm, an on-chip SHG efficiency of 250,000%/W is achieved, a state-of-the-art value reported among current integrated photonics platforms. An absolute conversion efficiency of 15% is recorded with a low pump power of 115$μ$W in the waveguide. Such periodically poled LN microrings also present a versatile platform for other cavity-enhanced quasi-phase matched $χ^{(2)}$ nonlinear optical processes.

physics.optics↗

arXiv2019

Low-Damping Ferromagnetic Resonance in Electron-Beam Patterned, High-$Q$ Vanadium Tetracyanoethylene Magnon Cavities

Integrating patterned, low-loss magnetic materials into microwave devices and circuits presents many challenges due to the specific conditions that are required to grow ferrite materials, driving the need for flip-chip and other indirect fabrication techniques. The low-loss ($α= 3.98 \pm 0.22 \times 10^{-5}$), room-temperature ferrimagnetic coordination compound vanadium tetracyanoethylene ($\mathrm{V[TCNE]}_x$) is a promising new material for these applications that is potentially compatible with semiconductor processing. Here we present the deposition, patterning, and characterization of $\mathrm{V[TCNE]}_x$ thin films with lateral dimensions ranging from 1 micron to several millimeters. We employ electron-beam lithography and liftoff using an aluminum encapsulated poly(methyl methacrylate), poly(methyl methacrylate-methacrylic acid) copolymer bilayer (PMMA/P(MMA-MAA)) on sapphire and silicon. This process can be trivially extended to other common semiconductor substrates. Films patterned via this method maintain low-loss characteristics down to 25 microns with only a factor of 2 increase down to 5 microns. A rich structure of thickness and radially confined spin-wave modes reveals the quality of the patterned films. Further fitting, simulation, and analytic analysis provides an exchange stiffness, $A_{ex} = 2.2 \pm 0.5 \times 10^{-10}$ erg/cm, as well as insights into the mode character and surface spin pinning. Below a micron, the deposition is non-conformal, which leads to interesting and potentially useful changes in morphology. This work establishes the versatility of $\mathrm{V[TCNE]}_x$ for applications requiring highly coherent magnetic excitations ranging from microwave communication to quantum information.

physics.app-ph↗

arXiv2019

Polarization mode hybridization and conversion in phononic wire waveguides

Phononic wire waveguides of subwavelength cross-section support two orthogonal polarization modes: the out-of-plane motion dominated Rayleigh-like and the in-plane motion dominated Love-like modes, analogous to transverse-electric and transverse-magnetic modes in photonic waveguides. Due to the anisotropic elasticity of the substrate material, the polarization states of phonons propagating along certain crystallographic orientations can strongly hybridize. Here we experimentally investigate the orientation-dependent mode hybridization in phononic wire waveguides patterned from GaN-on-sapphire thin films. Such mode hybridization allows efficient actuation of piezoelectrically inactive Love-like modes using common interdigital electrodes designed for Rayleigh-like modes, and further enables on-chip polarization conversion between guided transverse modes. Both are important for on-chip implementation of complex phononic circuits.

physics.app-ph↗

arXiv2019

Radiative cooling of a superconducting resonator

Cooling microwave resonators to near the quantum ground state, crucial for their operation in the quantum regime, is typically achieved by direct device refrigeration to a few tens of millikelvin. However, in quantum experiments that require high operation power such as microwave-to-optics quantum transduction, it is desirable to operate at higher temperatures with non-negligible environmental thermal excitations, where larger cooling power is available. In this Letter, we present a radiative cooling protocol to prepare a superconducting microwave mode near its quantum ground state in spite of warm environment temperatures for the resonator. In this proof-of-concept experiment, the mode occupancy of a 10-GHz superconducting resonator thermally anchored at 1.02~K is reduced to $0.44\pm0.05$ by radiatively coupling to a 70-mK cold load. This radiative cooling scheme allows high-operation-power microwave experiments to work in the quantum regime, and opens possibilities for routing microwave quantum states to elevated temperatures.

quant-ph↗