Searcharxiv⌕ Search

arXiv subjects

Hong X. Tang

Publications and source records attributed to Hong X. Tang.

At least 127 records · Page 7Linked to original sources

Magnon dark modes and gradient memory

Extensive efforts have been expended in developing hybrid quantum systems to overcome the short coherence time of superconducting circuits by introducing the naturally long-lived spin degree of freedom. Among all the possible materials, single-crystal yttrium iron garnet has shown up very recently as a promising candidate for hybrid systems, and various highly coherent interactions, including strong and even ultra-strong coupling, have been demonstrated. One distinct advantage of these systems is that the spins are in the form of well-defined magnon modes, which allows flexible and precise tuning. Here we demonstrate that by dissipation engineering, a non-Markovian interaction dynamics between the magnon and the microwave cavity photon can be achieved. Such a process enables us to build a magnon gradient memory to store information in the magnon dark modes, which decouple from the microwave cavity and thus preserve a long life-time. Our findings provide a promising approach for developing long-lifetime, multimode quantum memories.

quant-ph↗

Nano-optomechanical resonators in microfluidics

Operation of nanomechanical devices in water environment has been challenging due to the strong viscous damping that greatly impedes the mechanical motion. Here we demonstrate an optomechanical micro-wheel resonator integrated in microfluidic system that supports low-loss optical resonances at near-visible wavelength with quality factor up to 1.5 million. The device can be operated in self-oscillation mode in air with low threshold power of 45 uW. The very high optical Q allows the observation of the thermal Brownian motion of the mechanical mode in both air and water environment with high signal-to-background ratio. A numerical model is developed to calculate the hydrodynamic effect on the device due to the surrounding water, which agrees well with the experimental results. With its very high resonance frequency (170 MHz) and small loaded mass (75 pg), the present device is estimated to have mass sensitivity of attogram level in liquid environment with bandwidth of 1 Hz.

physics.optics↗

Cascaded optical transparency in multimode-cavity optomechanical systems

Electromagnetically induced transparency has great theoretical and experimental importance in many physics subjects, such as atomic physics, quantum optics, and more recent cavity optomechanics. Optical delay is the most prominent feature of electromagnetically induced transparency, and in cavity optomechanics optical delay is limited by mechanical dissipation rate of sideband-resolved mechanical modes. Here we demonstrate a cascaded optical transparency scheme by leveraging the parametric phonon-phonon coupling in a multimode optomechanical system, where a low damping mechanical mode in the unresolved-sideband regime is made to couple to an intermediate, high frequency mechanical mode in the resolved-sideband regime of an optical cavity. Extended optical delay and higher transmission, as well as optical advancing are demonstrated. These results provide a route to realize ultra-long optical delay, indicating a significant step toward integrated classical and quantum information storage devices.

physics.optics↗

Classical non-Gaussian state preparation through squeezing in an opto-electromechanical resonator

We demonstrate squeezing of a strongly interacting opto-electromechanical system using a parametric drive. By employing real-time feedback on the phase of the pump at twice the resonance frequency the thermo-mechanical noise is squeezed beyond the 3 dB instability limit. Surprisingly, this method can also be used to generate highly nonlinear states. We show that using the parametric drive with feedback on, classical number-like and cat-like states can be prepared. This presents a valuable electro-optomechanical state-preparation protocol that is extendable to the quantum regime.

physics.optics↗

Green, red and IR frequency comb line generation from single IR pump in AlN microring resonator

On-chip frequency comb generations enable compact broadband sources for spectroscopic sensing and precision spectroscopy. Recent microcomb studies focus on infrared spectral regime and have difficulty in accessing visible regime. Here, we demonstrate comb-like visible frequency line generation through second, third harmonic, and sum frequency conversion of a Kerr comb within a high Q aluminum nitride microring resonator pumped by a single telecom laser. The strong power enhancement, in conjunction with the unique combination of Pockels and Kerr optical nonlinearity of aluminum nitride, leads to cascaded frequency conversions in the visible spectrum. High-resolution spectroscopic study of the visible frequency lines indicates matched free spectrum range over all the bands. This frequency doubling and tripling effect in a single microcomb structure offers great potential for comb spectroscopy and self-referencing comb.

physics.optics↗

Electric-field coupling to spin waves in a centrosymmetric ferrite

We experimentally demonstrate that the spin-orbit interaction can be utilized for direct electric-field tuning of the propagation of spin waves in a single-crystal yttrium iron garnet magnonic waveguide. Magnetoelectric coupling not due to the spin-orbit interaction, and hence an order of magnitude weaker, leads to electric-field modification of the spin-wave velocity for waveguide geometries where the spin-orbit interaction will not contribute. A theory of the phase shift, validated by the experiment data, shows that, in the exchange spin wave regime, this electric tuning can have high efficiency. Our findings point to an important avenue for manipulating spin waves and developing electrically tunable magnonic devices.

cond-mat.mes-hall↗

Strongly coupled magnons and cavity microwave photons

We realize a cavity magnon-microwave photon system in which magnetic dipole interaction mediates strong coupling between collective motion of large number of spins in a ferrimagnet and the microwave field in a three-dimensional cavity. By scaling down the cavity size and increasing number of spins, an ultrastrong coupling regime is achieved with a cooperativity reaching 12600. Interesting dynamic features including classical Rabi oscillation, magnetically induced transparency, and Purcell effect are demonstrated in this highly versatile platform, highlighting its great potential for coherent information processing.

quant-ph↗

On-chip interaction-free measurements via the quantum Zeno effect

Although interference is a classical-wave phenomenon, the superposition principle, which underlies interference of individual particles, is at the heart of quantum physics. An interaction-free measurements (IFM) harnesses the wave-particle duality of single photons to sense the presence of an object via the modification of the interference pattern, which can be accomplished even if the photon and the object haven't interacted with each other. By using the quantum Zeno effect, the efficiency of an IFM can be made arbitrarily close to unity. Here we report an on-chip realization of the IFM based on silicon photonics. We exploit the inherent advantages of the lithographically written waveguides: excellent interferometric phase stability and mode matching, and obtain multipath interference with visibility above 98%. We achieved a normalized IFM efficiency up to 68.2%, which exceeds the 50% limit of the original IFM proposal.

quant-ph↗

Phase noise of self-sustained optomechanical oscillators

In this paper we present a theory that predicts the phase noise characteristics of self-sustained optomechanical oscillators. By treating the cavity optomechanical system as a feedback loop consisting of an optical cavity and a mechanical resonator, we analytically derive the transfer functions relating the amplitude/phase noise of all the relevant dynamical quantities from the quantum Langevin equations, and obtain a closed-form expressions for the phase noise spectral densities contributed from thermomechanical noise, photon shot noise, and low-frequency technical laser noise. We numerically calculate the phase noise for various situations and perform a sample calculation for an experimentally demonstrated system. We also show that the presented model reduces to the well-known Leeson's phase noise model when the amplitude noise and the amplitude/phase noise inter-transfers are ignored.

cond-mat.mes-hall↗

Microwave assisted coherent and nonlinear control in cavity piezo-optomechanical system

We present a cavity piezo-optomechanical system where microwave and optical degrees of freedom are coupled through an ultra-high frequency mechanical resonator. By utilizing the coherence among the three interacting modes, we demonstrate optical amplification, coherent absorption and a more general asymmetric Fano resonance. The strong piezoelectric drive further allows access to the large-amplitude-induced optomechanical nonlinearity, with which optical transparency at higher harmonics through multi-phonon scattering is demonstrated.

cond-mat.mes-hall↗

Adiabatic embedment of nanomechanical resonators in photonic microring cavities

We report a circuit cavity optomechanical system in which a nanomechanical resonator is adiabatically embedded inside an optical ring resonator with ultralow transition loss. The nanomechanical device forms part of the top layer of a horizontal silicon slot ring resonator, which enables dispersive coupling to the dielectric substrate via a tapered nanogap. Our measurements show nearly uncompromised optical quality factors (Q) after the release of the mechanical beam.

physics.optics↗

Active silicon integrated nanophotonics: ferroelectric BaTiO3 devices

The integration of complex oxides on silicon presents opportunities to extend and enhance silicon technology with novel electronic, magnetic, and photonic properties. Among these materials, barium titanate (BaTiO3) is a particularly strong ferroelectric perovskite oxide with attractive dielectric and electro-optic properties. Here we demonstrate nanophotonic circuits incorporating ferroelectric BaTiO3 thin films on the ubiquitous silicon-on-insulator (SOI) platform. We grow epitaxial, single-crystalline BaTiO3 directly on SOI and engineer integrated waveguide structures that simultaneously confine light and an RF electric field in the BaTiO3 layer. Using on-chip photonic interferometers, we extract a large effective Pockels coefficient of 213 plus minus 49 pm/V, a value more than six times larger than found in commercial optical modulators based on lithium niobate. The monolithically integrated BaTiO3 optical modulators show modulation bandwidth in the gigahertz regime, which is promising for broadband applications.

cond-mat.mtrl-sci↗

Low-loss, silicon integrated, aluminum nitride photonic circuits and their use for electro-optic signal processing

Photonic miniaturization requires seamless integration of linear and nonlinear optical components to achieve passive and active functions simultaneously. Among the available material systems, silicon photonics holds immense promise for optical signal processing and on-chip optical networks. However, silicon is limited to wavelengths above 1100 nm and does not provide the desired lowest order optical nonlinearity for active signal processing. Here we report the integration of aluminum nitride (AlN) films on silicon substrates to bring active functionalities to chip-scale photonics. Using CMOS-compatible sputtered thin films we fabricate AlN-on-insulator waveguides that exhibit low propagation loss (0.6 dB/cm). Exploiting AlN's inherent Pockels effect we demonstrate electro-optic modulation up to 4.5 Gb/s with very low energy consumption (down to 10 fJ/bit). The ultra-wide transparency window of AlN devices also enables high speed modulation at visible wavelengths. Our low cost, wideband, carrier-free photonic circuits hold promise for ultra-low power and high speed signal processing at the microprocessor chip level.

physics.optics↗

High performance nanophotonic circuits based on partially buried horizontal slot waveguides

We present a novel platform to construct high-performance nanophotonic devices in low refractive index dielectric films at telecoms wavelengths. The formation of horizontal slots by PECVD deposition of high index amorphous silicon provides a convenient and low-cost way to tailor nanophotonic devices to application needs. Low propagation loss of less than 2 dB/cm is obtained allowing us to fabricate optical resonators with measured high optical quality factors exceeding 10^5. We design and experimentally demonstrate on-chip grating couplers to efficiently couple light into integrated circuitry with coupling loss of 4 dB and optical bandwidth exceeding 110 nm. The entire on-chip circuitry consisting of input/output couplers, Mach-Zehnder interferometers with high extinction ratio and ring, racetrack resonators are designed, fabricated and characterized.

physics.optics↗

Integrated GaN photonic circuits on silicon (100) for second harmonic generation

We demonstrate second order optical nonlinearity in a silicon architecture through heterogeneous integration of single-crystalline gallium nitride (GaN) on silicon (100) substrates. By engineering GaN microrings for dual resonance around 1560 nm and 780 nm, we achieve efficient, tunable second harmonic generation at 780 nm. The \{chi}(2) nonlinear susceptibility is measured to be as high as 16 plus minus 7 pm/V. Because GaN has a wideband transparency window covering ultraviolet, visible and infrared wavelengths, our platform provides a viable route for the on-chip generation of optical wavelengths in both the far infrared and near-UV through a combination of \{chi}(2) enabled sum-/difference-frequency processes.

physics.optics↗

Electrical tuning and switching of an optical frequency comb generated in aluminum nitride microring resonators

Aluminum nitride has been shown to possess both strong Kerr nonlinearity and electro-optic Pockels effect. By combining these two effects, here we demonstrate on-chip reversible on/off switching of the optical frequency comb generated by an aluminum nitride microring resonator. We optimize the design of gating electrodes and the underneath resonator structure to effectively apply electric field without increasing the optical loss. The switching of the comb is monitored by measuring one of the frequency comb peaks while varying the electric field. The controlled comb electro-optic response is investigated for direct comparison with the transient thermal effect.

physics.optics↗

Photonic Cavity Synchronization of Nanomechanical Oscillators

Synchronization in oscillatory systems is a frequent natural phenomenon and is becoming an important concept in modern physics. Nanomechanical resonators are ideal systems for studying synchronization due to their controllable oscillation properties and engineerable nonlinearities. Here we demonstrate synchronization of two nanomechanical oscillators via a photonic resonator, enabling optomechanical synchronization between mechanically isolated nanomechanical resonators. Optical backaction gives rise to both reactive and dissipative coupling of the mechanical resonators, leading to coherent oscillation and mutual locking of resonators with dynamics beyond the widely accepted phase oscillator (Kuramoto) model. Besides the phase difference between the oscillators, also their amplitudes are coupled, resulting in the emergence of sidebands around the synchronized carrier signal.

physics.optics↗

Optical frequency comb generation from aluminum nitride micro-ring resonator

Aluminum nitride is an appealing nonlinear optical material for on-chip wavelength conversion. Here we report optical frequency comb generation from high quality factor aluminum nitride micro-ring resonators integrated on silicon substrates. By engineering the waveguide structure to achieve near-zero dispersion at telecommunication wavelengths and optimizing the phase matching for four-wave mixing, frequency combs are generated with a single wavelength continuous-wave pump laser. The Kerr coefficient (n2) of aluminum nitride is further extracted from our experimental results.

physics.optics↗