arXiv subjects

Hoonkyung Lee

Publications and source records attributed to Hoonkyung Lee.

33 records · Page 2Linked to original sources

arXiv2013

Carbyne from first principles: Chain of C atoms, a nanorod or a nanorope?

We report an extensive study of the properties of carbyne using first-principles calculations. We investigate carbyne's mechanical response to tension, bending, and torsion deformations. Under tension, carbyne is about twice as stiff as the stiffest known materials and has an unrivaled specific strength of up to 7.5*10^7 Nm/kg, requiring a force of ~10 nN to break a single atomic chain. Carbyne has a fairly large room-temperature persistence length of about 14 nm. Surprisingly, the torsional stiffness of carbyne can be zero but can be 'switched on' by appropriate functional groups at the ends. Further, under appropriate termination, carbyne can be switched into a magnetic-semiconductor state by mechanical twisting. We reconstruct the equivalent continuum-elasticity representation, providing the full set of elastic moduli for carbyne, showing its extreme mechanical performance (e.g. a nominal Young's modulus of 32.7 TPa with an effective mechanical thickness of 0.772 A). We also find an interesting coupling between strain and band gap of carbyne, which is strongly increased under tension, from 3.2 to 4.4 eV under a 10% strain. Finally, we study the performance of carbyne as a nanoscale electrical cable, and estimate its chemical stability against self-aggregation, finding an activation barrier of 0.6 eV for the carbyne-carbyne cross-linking reaction and an equilibrium cross-link density for two parallel carbyne chains of 1 cross-link per 17 C atoms (2.2 nm).

cond-mat.mtrl-sci↗

arXiv2013

Mott-insulator to commensurate-solid transition in a 4He layer on α-graphyne: Pseudo-spin symmetry breaking under a particle-induced pseudo-magnetic field

Path-integral Monte Carlo calculations were performed to study the adsorption of $^4$He atoms on $α$-graphyne. We find that one $^4$He atom can be embedded onto the in-plane center of each hexagon of the graphyne. In the first $^4$He layer above the $^4$He-embedded graphyne surface, a Mott insulating state was observed at the areal density of 0.0706 Å$^{-2}$ with three $^4$He atoms occupying each hexagonal cell while the helium atoms form a commensurate triangular solid at a density of 0.0941 Å$^{-2}$. Here we show that the Ising pseudo-spin symmetry introduced for two degenerate configurations of three $^4$He atoms in a hexagonal cell can be broken by additional $^4$He atoms placed at the hexagon vertices and the Mott-insulator to commensurate-solid transition is a transition from a nonmagnetic spin liquid of frustrated antiferromagnets to a spin-aligned ferromagnet under a particle-induced pseudo-magnetic field.

cond-mat.mtrl-sci↗

arXiv2011

Chemical engineering of adamantane by lithium functionalization: A first-principles density functional theory study

Using first-principle density functional theory, we investigated the hydrogen storage capacity of Li functionalized adamantane. We showed that if one of the acidic hydrogen atoms of adamantane is replaced by Li/Li+, the resulting complex is activated and ready to adsorb hydrogen molecules at a high gravimetric weight percent of around ~ 7.0 %. Due to polarization of hydrogen molecules under the induced electric field generated by positively charged Li/Li+, they are adsorbed on ADM.Li/Li+ complexes with an average binding energy of ~ -0.15 eV/H2, desirable for hydrogen storage applications. We also examined the possibility of the replacement of a larger number of acidic hydrogen atoms of adamantane by Li/Li+ and the possibility of aggregations of formed complexes in experiments. The stabilities of the proposed structures were investigated by calculating vibrational spectra and doing MD simulations.

cond-mat.mes-hall↗

arXiv2010

Edge Stability of BN sheets and Its Application for Designing Hybrid BNC Structures

First-principles investigations on the edge energies and edge stresses of single-layer hexagonal boron-nitride (BN) are presented. The armchair edges of BN nanoribbons (BNNRs) are more stable in energy than zigzag ones. Armchair BNNRs are under compressive edge stress while zigzag BNNRs are under tensile edge stress. The intrinsic spin-polarization and edge saturation play important roles in modulating the edge stability of BNNRs. The edge energy difference between BN and graphene could be used to guide the design of the specific hybrid BNC structures: in an armchair BNC nanoribbon (BNCNR), BN domains are expected to grow outside of C domains, while the opposite occurs in a zigzag BNCNR. More importantly, armchair BNCNRs can reproduce unique electronic properties of armchair graphene nanoribbons (GNRs), which are expected to be robust against edge functionalization or disorder. Within certain C/BN ratio, zigzag BNCNRs may exhibit intrinsic half-metallicity without any external constraints. These unexpected electronic properties of BNCNRs may offer unique opportunities to develop nanoscale electronics and spintronics beyond individual graphene and BN. Generally, these principles for designing BNC could be extended to other hybrid nanostructures.

cond-mat.mtrl-sci↗

arXiv2010

Selective Functionalization of Halogens on Zigzag Graphene Nanoribbons: A Route to the Separation of Zigzag Graphene Nanoribbons

Using the ab initio pseudopotential density functional method, we investigate the functionalization of halogen molecules into graphene-based nanostructures with zigzag and armchair edges. We find that halogen molecules adsorb through chemisorption on the zigzag edge carbon atoms with a binding energy of ~1-5 eV and their adsorption on a perfect zigzag edge is preferred, in sharp contrast to physisorption on the armchair edge and elsewhere where they adsorb with a binding energy of ~0.07 eV. We suggest that our findings would be utilized for an approach to the separation of zigzag graphene nanoribbons with regular edges with the change of the solubility of the functionalized nanoribbons.

cond-mat.mtrl-sci↗

arXiv2010

Preferential functionalization on zigzag graphene nanoribbons: First-principles calculations

We investigate the functionalization of functional groups to graphene nanoribbons with zigzag and armchair edges using first principles calculations. We find that the formation energy for the configuration of the functional groups functionalized to the zigzag edge is ~0.2 eV per functional group lower than that to the armchair edge. The formation energy difference arises from a structural deformation on the armchair edge by the functionalization whereas there is no structural deformation on the zigzag edge. Selective functionalization on the zigzag edge takes place at a condition of the temperature and the pressure of ~25 oC and 10-5 atm. Our findings show that the selective functionalization can offer the opportunity for an approach to the separation of zigzag graphene nanoribbons with their solubility change.

cond-mat.mtrl-sci↗

arXiv2010

Releasing H2 molecules with a partial pressure difference without the use of temperature

Using the pseudopotential density functional method as well as equilibrium thermodynamic functions, we explore the process of releasing H2 molecules adsorbed on a transition metal atom caused by the hydrogen-ammonia partial pressure difference. The H2 molecules bind to a transition metal atom at H2 pressure-NH3 pressure-temperature 50 atm-10-9 atm-25 °C, and they are released at 3 atm-10-6 atm-25 °C. This process involves the same mechanism responsible for carbon monoxide poisoning of hemoglobin with the O2-CO partial pressure difference. We show that our findings can be applicable to an approach to induce hydrogen desorption on nanostructured hydrogen storage materials without the need for increasing temperature.

cond-mat.mtrl-sci↗

arXiv2010

Effect of the benzyl groups on the binding of H2 by three-coordinated Ti complexes

Using first-principles calculations, we investigate the adsorption of H2 molecules on a three-coordinated benzyl-decorated titanium complex suggested in a recent experiment [Hamaed et al., J. Am. Chem. Soc. 130, 6992 (2008)]. Unlike the interpretation of the experimental results that the Ti(III) complex can bind five H2 molecules via the Kubas interaction, the Ti(III) complex cannot adsorb H2 molecules via the Kubas interaction. In contrast, a benzyl-released Ti(III) complex can adsorb up to two H2 molecules with a binding energy of ~0.25 eV/H2 via the Kubas interaction, in good agreement with the measurement of ~0.2 eV. The calculated occupation number of H2 molecules at 25 oC and -78 oC under 60 atm is 0.9 and 1.9, respectively, in good agreement with the measurement of 1.1 and 2.4 near the conditions, respectively. Our results suggest that the Ti complex in experiment might be a benzyl-released form.

cond-mat.mtrl-sci↗

arXiv2010

Gate-Controlled Ionization and Screening of Cobalt Adatoms on a Graphene Surface

We describe scanning tunneling spectroscopy (STS) measurements performed on individual cobalt (Co) atoms deposited onto backgated graphene devices. We find that Co adatoms on graphene can be ionized by either the application of a global backgate voltage or by the application of a local electric field from a scanning tunneling microscope (STM) tip. Large screening clouds are observed to form around Co adatoms ionized in this way, and we observe that some intrinsic graphene defects display a similar behavior. Our results provide new insight into charged impurity scattering in graphene, as well as the possibility of using graphene devices as chemical sensors.

cond-mat.mtrl-sci↗

arXiv2010

Ab initio study of beryllium-decorated fullerenes for hydrogen storage

We have found that a beryllium (Be) atom on nanostructured materials with H2 molecules generates a Kubas-like dihydrogen complex [H. Lee et al. arXiv:1002.2247v1 (2010)]. Here, we investigate the feasibility of Be-decorated fullerenes for hydrogen storage using ab initio calculations. We find that the aggregation of Be atoms on pristine fullerenes is energetically preferred, resulting in the dissociation of the dihydrogen. In contrast, for boron (B)-doped fullerenes, Be atoms prefer to be individually attached to B sites of the fullerenes, and a maximum of one H2 molecule binds to each Be atom in a form of dihydrogen with a binding energy of ~0.3 eV. Our results show that individual dispersed Be-decorated B-doped fullerenes can serve as a room-temperature hydrogen storage medium.

cond-mat.mtrl-sci↗

arXiv2010

Beryllium-dihydrogen complexes on nanostructures

Using the pseudopotential density functional method, we find that a Be atom on a nanostructure with H2 molecules forms a Be-dihydrogen complex through the hybridization of the Be s or p orbits with the H2 sigma orbits and the binding energy of the H2 molecules is in the range of ~0.3 - 0.8 eV/H2. We also study Be-dihydrogen complexes on various nanostructures and demonstrate the feasibility of the application of the complexes to a hydrogen storage medium that operates near room temperature and ambient pressure.

cond-mat.mtrl-sci↗

arXiv2010

Calcium-Decorated Graphene-Based Nanostructures for Hydrogen Storage

We report a first-principles study of hydrogen storage media consisting of calcium atoms and graphene-based nanostructures. We find that Ca atoms prefer to be individually adsorbed on the zigzag edge of graphene with a Ca-Ca distance of 10 A without clustering of the Ca atoms, and up to six H2 molecules can bind to a Ca atom with a binding energy of ~0.2 eV/H2. A Ca-decorated zigzag graphene nanoribbon (ZGNR) can reach the gravimetric capacity of ~5 wt % hydrogen. We also consider various edge geometries of the graphene for Ca dispersion.

cond-mat.mtrl-sci↗

arXiv2009

Calcium-Decorated Carbon Nanotubes for High-Capacity Hydrogen Storage

Using first-principles calculations, we perform a search for high-capacity hydrogen storage media based on individually dispersed calcium atoms on doped or defective carbon nanotubes. We find that up to six H2 molecules can bind to a Ca atom each with a desirable binding energy of ~0.2 eV/H2. The hybridization of the empty Ca 3d states with the H2 sigma states contributes to the H2 binding, and Ca clustering is suppressed by preferential binding of Ca atoms to doped boron and defect sites dispersed on carbon nanotubes. We also show that individual Ca-decorated B-doped CNTs with a concentration of ~6 at. % B doping can reach the gravimetric capacity of ~5 wt % hydrogen.

cond-mat.mtrl-sci↗

arXiv2006

Electron orbital valves made of multiply connected armchair carbon nanotubes with mirror-reflection symmetry: tight-binding study

Using the tight-binding method and the Landauer-Büttiker conductance formalism, we demonstrate that a multiply connected armchair carbon nanotube with a mirror-reflection symmetry can sustain an electron current of the $π$-bonding orbital while suppress that of the $π$-antibonding orbital over a certain energy range. Accordingly, the system behaves like an electron orbital valve and may be used as a scanning tunneling microscope to probe pairing symmetry in d-wave superconductors or even orbital ordering in solids which is believed to occur in some transition-metal oxides.

cond-mat.other↗

arXiv2006

Combinatorial Search for Optimal Hydrogen-Storage Nanomaterials Based on Polymers

We perform an extensive combinatorial search for optimal nanostructured hydrogen storage materials among various metal-decorated polymers using first-principles density-functional calculations. We take into account the zero-point vibration as well as the pressure- and temperature-dependent adsorption-desorption probability of hydrogen molecules. An optimal material we identify is Ti-decorated cis-polyacetylene with reversibly usable gravimetric and volumetric density of 7.6 weight percent and 63 kg/m^3 respectively near ambient conditions. We also propose ``thermodynamically usable hydrogen capacity" as a criterion for comparing different storage materials.

cond-mat.mtrl-sci↗