arXiv subjects

Hubert J. Krenner

Publications and source records attributed to Hubert J. Krenner.

At least 19 recordsLinked to original sources

arXiv2026

Signatures of inter-sideband coherence in the resonance fluorescence spectrum of an acoustically-modulated quantum dot

We theoretically investigate the inter-sideband phase coherence within the resonance fluorescence spectrum of an acoustically modulated quantum dot using a filtered-field formalism for a Mach-Zehnder configuration. We demonstrate that geometric slant of the interferograms provides an indicator of phase coherence that is resilient to environmental white noise. Specifically, noise-induced spectral diffusion reduces the global fringe intensity, while leaving the characteristic inclination strictly invariant. Our findings establish a framework for verifying single-photon coherence between spectral sidebands, essential for frequency-bin encoding and scalable quantum networking in realistic, noisy solid-state architectures.

cond-mat.mes-hall↗

arXiv2026

Identifying Contact Barrier Types in Few-Layer MoS2 Devices Using Correlative IV, LBIC, and Bias-Dependent KPFM

Electrical contacts between metals and two-dimensional (2D) semiconductors such as molybdenum disulfide (MoS2) critically govern device performance, yet their microscopic nature remains difficult to disentangle using any single characterization technique. Here we present an integrated experimental framework that combines current-voltage (IV) characterization, laser beam induced current (LBIC) mapping, and bias-dependent Kelvin probe force microscopy (KPFM) to comprehensively resolve the contact properties of few-layer MoS2-based two-terminal devices under ambient conditions. IV measurements deliver macroscopic transport characteristics as a function of bias voltage and illumination conditions. LBIC maps the local photocurrent response with micrometer spatial resolution, revealing the position and nature of internal electric fields at MoS2-metal interfaces. KPFM, operated under an applied static bias rather than in the conventional work-function mode, provides nanoscale-resolved potential distributions that quantify the relative magnitudes and spatial locations of contact barriers. We apply this framework to three representative devices - one exhibiting ohmic-like and two exhibiting diode-like contact behavior - and demonstrate that the combined analysis can unambiguously identify whether the dominant barrier is of Schottky or tunnel type and determine the asymmetry between the two contacts. We further demonstrate that thermal annealing significantly reduces the total resistance, while contact barriers remain the dominant source of resistance. The methodology is directly transferable to other 2D semiconductor-metal systems and provides a practical yet comprehensive route toward a quantitative microscopic understanding of 2D device contacts.

cond-mat.mtrl-sci↗

arXiv2026

Magnetically Programmable Surface Acoustic Wave Filters: Device Concept and Predictive Modeling

Filtering surface acoustic wave (SAW) signals of specified frequencies depending on the strength of an external magnetic field in a magnetostrictive material has garnered significant interest due to its potential scientific and industrial applications. Here, we propose a device that achieves selective SAW attenuation by instead programming its internal magnetic state. To this end, we perform micromagnetic simulations for the magnetoelastic interaction of the Rayleigh SAW mode with spin waves (SWs) in exchange-decoupled Co/Ni islets on a piezoelectric LiTaO$_3$ substrate. Due to the islets exhibiting perpendicular magnetic anisotropy, the stray-field interaction between them leads to a shift in the SW dispersion depending on the magnetic alignment of neighboring islets. This significantly changes the efficiency of the magnetoelastic interaction at specified frequencies. We predict changes in SAW transmission of 52.0 dB/mm at 3.8 GHz depending on the state of the device. For the efficient simulation of the device, we extend a prior energy conservation argument based on analytical solutions of the SW to finite-difference numerical calculations, enabling the modeling of arbitrary magnetization patterns like the proposed islet-based design.

cond-mat.mes-hall↗

arXiv2026

Topical review on acousto-optical Floquet engineering of single-photon emitters

The combination of solid state single-photon emitters and mechanical excitations on a common platform is a promising approach for the development of hybrid quantum technologies. In this topical review we discuss state-of-the-art platforms for emitter-based acousto-optics and their feasibility for acousto-optical Floquet engineering. To this aim we investigate theoretically the resonance fluorescence (RF) spectrum of an acoustically modulated single-photon emitter under arbitrarily strong optical driving. In the spectrum, the combination of Mollow triplet physics and phonon sidebands results in a complex structure of crossings, anti-crossings, and line suppressions. We apply Floquet theory to develop an analytical expression for the RF spectrum. Complemented with perturbative and non-perturbative techniques, this allows us to fully understand the underlying acousto-optical double dressing physics of the hybrid quantum system, explaining the observed spectral features. We use these insights to perform an experimental feasibility study of existing emitter-based acousto-optical platforms and come to the conclusion that surface and bulk acoustic waves interfaced with quantum dots as an established Mollow triplet platform represent particularly promising infrastructures for acousto-optical Floquet engineering.

cond-mat.mes-hall↗

arXiv2026

Coupling Quantum Dots to Elastic Waves in a Phononic Crystal Waveguide

We present a comprehensive study of quantum dot (QD) coupling to various phononic modes in a phononic waveguide, combining multiband kp and configuration-interaction (CI) QD state simulations with finite-element waveguide mode modeling. We consider self-assembled Stranski-Krastanov InGaAs/GaAs as well as local droplet-etched GaAs/AlGaAs structures. Using kp-CI calculations, we quantify the strain and piezoelectric responses of InAs and GaAs QDs. By systematically isolating volumetric/shear deformation-potential and piezoelectric channels, we demonstrate how mode symmetries dictate distinct coupling mechanisms. We identify the dominant coupling channels and characterize their observable signatures in the QD response. We predict strong linear energy shifts under volumetric strain and quadratic behavior under shear strain, especially in GaAs QDs. The piezoelectric effect is dominated by polarizability, which also leads to a quadratic response. The simulations show energy modulations up to 0.7 meV for an acoustic wave with 0.1 nm amplitude. The quadratic response to shear strain and piezoelectric field leads to frequency doubling in the QD response to a mechanical wave and to non-harmonic time traces when linear and quadratic effects contribute to a similar degree. The deep understanding of QD-acoustic couplings opens pathways to the optimal design of QD and waveguide structures, as well as to improved engineering of acousto-optic quantum interfaces.

cond-mat.mes-hall↗

arXiv2025

Impact of Electrical Contacts on Transition Metal Dichalcogenides-Based Acoustoelectric and Acousto-Photoelectric Devices

We study the impact of electrical contact barriers in hybrid WSe$_2$-LiNbO$_3$-based acoustoelectric and acousto-photoelectric devices using a combination of scanning photocurrent and acousto-electric current spectroscopy. Static scanning photocurrent measurements provide a qualitative measure of the band-bending and spatial distribution of the Schottky barrier between semiconducting WSe$_2$ and gold electrodes whereas the surface acoustic wave-induced acousto-electric current reveals the height of the tunnelling barrier created by the van der Waals gap between the multilayered WSe$_2$ flake and the gold electrodes in addition to the Schottky barrier. The combination of both techniques shows a ten-fold increase in the photocurrent by the acoustic wave. Moreover, the observed spatial redistribution of the current is attributed to the interplay between the contact properties at the source and drain electrodes and the charge carrier dynamics induced by the surface acoustic wave. The ratio of acoustic wavelength to the electrical channel length is found to impact the SAW-induced charge carrier transport. For a channel length shorter than one acoustic wavelength, carriers undergo a seesaw-like motion which changes to charge conveyance for channel lengths comparable or exceeding the acoustic wavelength.

cond-mat.mes-hall↗

arXiv2025

Modeling Magnetoelastic Wave Interactions in Magnetic Films and Heterostructures: A finite-difference approach

The (inverse) magnetostrictive effect in ferromagnets couples the magnetic properties to the mechanical stress, allowing for an interaction between the magnetic and mechanical degrees of freedom. In this work, we present a time-integration scheme for the self-consistent simulation of coupled magnetoelastic dynamics within the framework of finite-difference micromagnetism. The proposed implementation extends the Landau-Lifshitz-Gilbert equation by a strain-induced effective field and concurrently solves the elastic equation of motion, while correctly incorporating stress and strain discontinuities at material interfaces. We then present a comprehensive set of examples, ranging from static stress configurations over material boundaries to simulations of surface acoustic wave attenuation in magnetically structured thin and thick films. These computational experiments both validate the implementation and underscore the importance of properly handling jump and boundary conditions in magnon-phonon interaction studies.

physics.comp-ph↗

arXiv2023

Heterogeneous integration of superconducting thin films and epitaxial semiconductor heterostructures with Lithium Niobate

We report on scalable heterointegration of superconducting electrodes and epitaxial semiconductor quantum dots on strong piezoelectric and optically nonlinear lithium niobate. The implemented processes combine the sputter-deposited thin film superconductor niobium nitride and III-V compound semiconductor membranes onto the host substrate. The superconducting thin film is employed as a zero-resistivity electrode material for a surface acoustic wave resonator with internal quality factors $Q \approx 17000$ representing a three-fold enhancement compared to identical devices with normal conducting electrodes. Superconducting operation of $\approx 400\,\mathrm{MHz}$ resonators is achieved to temperatures $T>7\,\mathrm{K}$ and electrical radio frequency powers $P_{\mathrm{rf}}>+9\,\mathrm{dBm}$. Heterogeneously integrated single quantum dots couple to the resonant phononic field of the surface acoustic wave resonator operated in the superconducting regime. Position and frequency selective coupling mediated by deformation potential coupling is validated using time-integrated and time-resolved optical spectroscopy. Furthermore, acoustoelectric charge state control is achieved in a modified device geometry harnessing large piezoelectric fields inside the resonator. The hybrid quantum dot - surface acoustic wave resonator can be scaled to higher operation frequencies and smaller mode volumes for quantum phase modulation and transduction between photons and phonons via the quantum dot. Finally, the employed materials allow for the realization of other types of optoelectronic devices, including superconducting single photon detectors and integrated photonic and phononic circuits.

physics.app-ph↗

arXiv2022

Site-selective ion beam synthesis and optical properties of individual CdSe nanocrystal quantum dots in a SiO2 matrix

Cadmium selenide nanocrystal quantum dots (NC-QDs) are site-selectively synthesized by sequential ion beam implantation of selenium and cadmium ions in a SiO2 matrix through sub-micron apertures followed by a rapid thermal annealing step. The size, areal density and optical emission energy of the NC-QDs are controlled by the ion fluence during implantation and the diameter of implantation aperture. For low fluences and small apertures the emission of these optically active emitters is blue-shifted compared to that of the bulk material by $>100\,{\rm meV}$ due to quantum confinement. The emission exhibits spectral diffusion and blinking on a second timescales as established also for solution synthesized NC-QDs.

cond-mat.mes-hall↗

arXiv2022

On-chip generation and dynamic piezo-optomechanical rotation of single photons

Integrated photonic circuits are key components for photonic quantum technologies and for the implementation of chip-based quantum devices. Future applications demand flexible architectures to overcome common limitations of many current devices, for instance the lack of tuneabilty or built-in quantum light sources. Here, we report on a dynamically reconfigurable integrated photonic circuit comprising integrated quantum dots (QDs), a Mach-Zehnder interferometer (MZI) and surface acoustic wave (SAW) transducers directly fabricated on a monolithic semiconductor platform. We demonstrate on-chip single photon generation by the QD and its sub-nanosecond dynamic on-chip control. Two independently applied SAWs piezo-optomechanically rotate the single photon in the MZI or spectrally modulate the QD emission wavelength. In the MZI, SAWs imprint a time-dependent optical phase and modulate the qubit rotation to the output superposition state. This enables dynamic single photon routing with frequencies exceeding one gigahertz. Finally, the combination of the dynamic single photon control and spectral tuning of the QD realizes wavelength multiplexing of the input photon state and demultiplexing it at the output. Our approach is scalable to multi-component integrated quantum photonic circuits and is compatible with hybrid photonic architectures and other key components for instance photonic resonators or on-chip detectors.

physics.optics↗

arXiv2022

Photon scattering from a quantum acoustically modulated two-level system

We calculate the resonance fluorescence signal of a two-level system coupled to a quantized phonon mode. By treating the phonons in the independent boson model and not performing any approximations in their description, we also have access to the state evolution of the phonons. We confirm the validity of our model by simulating the limit of an initial quasi-classical coherent phonon state, which can be compared to experimentally confirmed results in the semiclassical limit. In addition we predict photon scattering spectra in the limit of purely quantum mechanical phonon states by approaching the phononic vacuum. Our method further allows us to simulate the impact of the light scattering process on the phonon state by calculating Wigner functions. We show that the phonon mode is brought into characteristic quantum states by the optical excitation process.

cond-mat.mes-hall↗

arXiv2021

High-dimensional acousto-optoelectric correlation spectroscopy reveals coupled carrier dynamics in polytypic nanowires

The authors combine acousto-optoelectric and multi-channel photon correlation spectroscopy to probe spatio-temporal carrier dynamics induced by a piezoelectric surface acoustic wave (SAW). The technique is implemented by combining phase-locked optical micro-photoluminescence spectroscopy and simultaneous three-channel time resolved detection. From the recorded time correlated single photon counting data the time transients of individual channels and the second and third order correlation functions are obtained with sub-nanosecond resolution. The method is validated by probing the correlations SAW-driven carrier dynamics between three decay channels of a single polytypic semiconductor nanowire on a conventional LiNbO$_\mathrm{3}$ SAW delay line chip. The method can be readily applied to other types of nanosystems and probe SAW-regulated charge state preparation in quantum dots, charge transfer processes in van der Waals heterostructures or other types of hybrid nanoarchitectures.

cond-mat.mes-hall↗

arXiv2021

Resonance fluorescence spectral dynamics of an acoustically modulated quantum dot

Quantum technologies that rely on photonic qubits require a precise controllability of their properties. For this purpose hybrid approaches are particularly attractive because they offer a large flexibility to address different aspects of the photonic degrees of freedom. When combining photonics with other quantum platforms like phonons, quantum transducers have to be realized that convert between the mechanical and optical domain. Here, we realize this interface between phonons in the form of surface acoustic waves (SAWs) and single photons, mediated by a single semiconductor quantum dot exciton. In this combined theoretical and experimental study, we show that the different sidebands exhibit characteristic blinking dynamics that can be controlled by detuning the laser from the exciton transition. By developing analytical approximations we gain a better understanding of the involved internal dynamics. Our specific SAW approach allows us to reach the ideal frequency range of around 1 GHz that enables simultaneous temporal and spectral phonon sideband resolution close to the combined fundamental time-bandwidth limit.

cond-mat.mes-hall↗

arXiv2020

A Hybrid (Al)GaAs-LiNbO$_3$ Surface Acoustic Wave Resonator for Cavity Quantum Dot Optomechanics

A hybrid device comprising a (Al)GaAs quantum dot heterostructure and a LiNbO$_3$ surface acoustic wave resonator is fabricated by heterointegration. High acoustic quality factors $Q>4000$ are demonstrated for an operation frequency $f\approx 300$ MHz. The measured large quality factor-frequency products $Q\times f>10^{12}$ ensures the suppression of decoherence due to thermal noise for temperatures exceeding $T>50\,\mathrm{K}$. Frequency and position dependent optomechanical coupling of single quantum dots and the resonator modes is observed.

physics.optics↗

arXiv2020

Nonlinear quantum dot optomechanics

Wave mixing is an archetypical phenomenon in bosonic systems. In optomechanics, the bi-directional conversion between electromagnetic waves or photons at optical frequencies and elastic waves or phonons at radio frequencies is building on precisely this fundamental principle. Surface acoustic waves provide a versatile interconnect on a chip and, thus, enable the optomechanical control of remote systems. Here, we report on the coherent nonlinear three-wave mixing between the coherent fields of two radio frequency surface acoustic waves and optical laser photons via the dipole transition of a single quantum dot exciton. In the resolved sideband regime, we demonstrate fundamental acoustic analogues of sum and difference frequency generation between the two SAWs and employ phase matching to deterministically enhance or suppress individual sidebands. This bi-directional transfer between the acoustic and optical domains is described by theory which fully takes into account direct and virtual multi-phonon processes. Finally, we show that the precision of the wave mixing is limited by the frequency accuracy of modern radio frequency electronics.

quant-ph↗

arXiv2019

Quantum dot optomechanics in suspended nanophononic strings

The optomechanical coupling of quantum dots and flexural mechanical modes is studied in suspended nanophononic strings. The investigated devices are designed and monolithically fabricated on an (Al)GaAs heterostructure. Radio frequency elastic waves with frequencies ranging between $f$=250 MHz to 400 MHz are generated as Rayleigh surface acoustic waves on the unpatterned substrate and injected as Lamb waves in the nanophononic string. Quantum dots inside the nanophononic string exhibit a 15-fold enhanced optomechanical modulation compared to those dynamically strained by the Rayleigh surface acoustic wave. Detailed finite element simulations of the phononic mode spectrum of the nanophononic string confirm, that the observed modulation arises from valence band deformation potential coupling via shear strain. The corresponding optomechanical coupling parameter is quantified to $0.15 \mathrm{meV nm^{-1}}$. This value exceeds that reported for vibrating nanorods by approximately one order of magnitude at 100 times higher frequencies. Using this value, a derive vertical displacements in the range of 10 nm is deduced from the experimentally observed modulation. The results represent an important step towards the creation of large scale optomechanical circuits interfacing single optically active quantum dots with optical and mechanical waves.

cond-mat.mes-hall↗

arXiv2019

A frequency-tunable nanomembrane mechanical oscillator with embedded quantum dots

Hybrid systems consisting of a quantum emitter coupled to a mechanical oscillator are receiving increasing attention for fundamental science and potential applications in quantum technologies. In contrast to most of the presented works, in which the oscillator eigenfrequencies are irreversibly determined by the fabrication process, we present here a simple approach to obtain frequency-tunable mechanical resonators based on suspended nanomembranes. The method relies on a micromachined piezoelectric actuator, which we use both to drive resonant oscillations of a suspended Ga(Al)As membrane with embedded quantum dots and to fine tune their mechanical eigenfrequencies. Specifically, we excite oscillations with frequencies of at least 60 MHz by applying an AC voltage to the actuator and tune the eigenfrequencies by at least 25 times their linewidth by continuously varying the elastic stress state in the membranes through a DC voltage. The light emitted by optically excited quantum dots is used as sensitive local strain gauge to monitor the oscillation frequency and amplitude. We expect that our method has the potential to be applicable to other optomechanical systems based on dielectric and semiconductor membranes possibly operating in the quantum regime.

physics.app-ph↗

arXiv2017

Multiharmonic frequency-chirped transducers for surface-acoustic-wave optomechanics

Wide passband interdigital transducers are employed to establish a stable phase-lock between a train of laser pulses emitted by a mode-locked laser and a surface acoustic wave generated electrically by the transducer. The transducer design is based on a multi-harmonic split-finger architecture for the excitation of a fundamental surface acoustic wave and a discrete number of its overtones. Simply by introducing a variation of the transducer's periodicity $p$, a frequency chirp is added. This combination results in wide frequency bands for each harmonic. The transducer's conversion efficiency from the electrical to the acoustic domain was characterized optomechanically using single quantum dots acting as nanoscale pressure sensors. The ability to generate surface acoustic waves over a wide band of frequencies enables advanced acousto-optic spectroscopy using mode-locked lasers with fixed repetition rate. Stable phase-locking between the electrically generated acoustic wave and the train of laser pulses was confirmed by performing stroboscopic spectroscopy on a single quantum dot at a frequency of 320 MHz. Finally, the dynamic spectral modulation of the quantum dot was directly monitored in the time domain combining stable phase-locked optical excitation and time-correlated single photon counting. The demonstrated scheme will be particularly useful for the experimental implementation of surface acoustic wave-driven quantum gates of optically addressable qubits or collective quantum states or for multi-component Fourier synthesis of tailored nanomechanical waveforms.

physics.app-ph↗