arXiv subjects

Hubert J. Krenner

Publications and source records attributed to Hubert J. Krenner.

35 records · Page 2Linked to original sources

arXiv2017

Multiharmonic frequency-chirped transducers for surface-acoustic-wave optomechanics

Wide passband interdigital transducers are employed to establish a stable phase-lock between a train of laser pulses emitted by a mode-locked laser and a surface acoustic wave generated electrically by the transducer. The transducer design is based on a multi-harmonic split-finger architecture for the excitation of a fundamental surface acoustic wave and a discrete number of its overtones. Simply by introducing a variation of the transducer's periodicity $p$, a frequency chirp is added. This combination results in wide frequency bands for each harmonic. The transducer's conversion efficiency from the electrical to the acoustic domain was characterized optomechanically using single quantum dots acting as nanoscale pressure sensors. The ability to generate surface acoustic waves over a wide band of frequencies enables advanced acousto-optic spectroscopy using mode-locked lasers with fixed repetition rate. Stable phase-locking between the electrically generated acoustic wave and the train of laser pulses was confirmed by performing stroboscopic spectroscopy on a single quantum dot at a frequency of 320 MHz. Finally, the dynamic spectral modulation of the quantum dot was directly monitored in the time domain combining stable phase-locked optical excitation and time-correlated single photon counting. The demonstrated scheme will be particularly useful for the experimental implementation of surface acoustic wave-driven quantum gates of optically addressable qubits or collective quantum states or for multi-component Fourier synthesis of tailored nanomechanical waveforms.

physics.app-ph↗

arXiv2017

Multi-harmonic Quantum Dot Optomechanics in fused LiNbO$_3$-(Al)GaAs hybrids

We fabricated an acousto-optic semiconductor hybrid device for strong optomechanical coupling of individual quantum emitters and a surface acoustic wave. Our device comprises a surface acoustic wave chip made from highly piezoelectric LiNbO$_3$ and a GaAs-based semiconductor membrane with an embedded layer of quantum dots. Employing multi-harmonic transducers, we generated sound waves on LiNbO$_3$ over a wide range of radio frequencies. We monitored their coupling to and propagation across the semiconductor membrane both in the electrical and optical domain. We demonstrate enhanced optomechanical tuning of the embedded quantum dots with increasing frequencies. This effect was verified by finite element modelling of our device geometry and attributed to an increased localization of the acoustic field within the semiconductor membrane. For moderately high acoustic frequencies, our simulations predict strong optomechanical coupling making our hybrid device ideally suited for applications in semiconductor based quantum acoustics.

cond-mat.mes-hall↗

arXiv2017

Scalable Transfer-Free Fabrication of MoS$_2$/SiO$_2$ Hybrid Nanophotonic Cavity Arrays with Quality Factors Exceeding 4000

We report the fully-scalable fabrication of a large array of hybrid molybdenum disulfide (MoS$_2$) - silicon dioxide (SiO$_2$) one-dimensional, free-standing photonic-crystal cavities capable of enhancement of the MoS$_2$ photoluminescence at the narrow cavity resonance. We demonstrate continuous tunability of the cavity resonance wavelength across the entire emission band of MoS$_2$ simply by variation of the photonic crystal periodicity. Device fabrication started by substrate-scale growth of MoS$_2$ using chemical vapor deposition (CVD) on non-birefringent thermal oxide on a silicon wafer; it was followed by lithographic fabrication of a photon crystal nanocavity array on the same substrate at more than 50% yield of functional devices. Our cavities exhibit three dominant modes with measured linewidths less than 0.2 nm, corresponding to quality factors exceeding 4000. All experimental findings are found to be in excellent agreement with finite difference time domain simulations.

cond-mat.mes-hall↗

arXiv2016

Surface acoustic wave regulated single photon emission from a coupled quantum dot-nanocavity system

A coupled quantum dot--nanocavity system in the weak coupling regime of cavity quantumelectrodynamics is dynamically tuned in and out of resonance by the coherent elastic field of a $f_{\rm SAW}\simeq800\,\mathrm{MHz}$ surface acoustic wave. When the system is brought to resonance by the sound wave, light-matter interaction is strongly increased by the Purcell effect. This leads to a precisely timed single photon emission as confirmed by the second order photon correlation function $g^{(2)}$. All relevant frequencies of our experiment are faithfully identified in the Fourier transform of $g^{(2)}$, demonstrating high fidelity regulation of the stream of single photons emitted by the system.

cond-mat.mes-hall↗

arXiv2016

Fourier synthesis of radio frequency nanomechanical pulses with different shapes

The concept of Fourier synthesis is heavily employed in both consumer electronic products and fundamental research. In the latter, pulse shaping is key to dynamically initialize, probe and manipulate the state of classical or quantum systems. In nuclear magnetic resonance, for instance, shaped pulses have a long-standing tradition and the underlying fundamental concepts have subsequently been successfully extended to optical frequencies and even to implement quantum gate operations. Transferring these paradigms to nanomechanical systems requires tailored nanomechanical waveforms. Here, we report on an additive Fourier synthesizer for nanomechanical waveforms based on monochromatic surface acoustic waves. As a proof of concept, we electrically synthesize four different elementary nanomechanical waveforms from a fundamental surface acoustic wave at $ f_1 \sim 150$ MHz using a superposition of up to three discrete harmonics $f_n$. We employ these shaped pulses to interact with an individual sensor quantum dot and detect their deliberately and temporally modulated strain component via the opto-mechanical quantum dot response. Importantly, and in contrast to the direct mechanical actuation by bulk piezoactuators, surface acoustic waves provide much higher frequencies (> 20 GHz) to resonantly drive mechanical motion. Thus, our technique uniquely allows coherent mechanical control of localized vibronic modes of optomechanical crystals, even in the quantum limit when cooled to the vibrational ground state.

cond-mat.mes-hall↗

arXiv2015

Ultrafast photodetection in the quantum wells of single AlGaAs/GaAs-based nanowires

We investigate the ultrafast optoelectronic properties of single Al0.3Ga0.7As/GaAs-core-shell-nanowires. The nanowires contain GaAs-based quantum wells. For a resonant excitation of the quantum wells, we find a picosecond photocurrent which is consistent with an ultrafast lateral expansion of the photogenerated charge carriers. This Dember-effect does not occur for an excitation of the GaAs-based core of the nanowires. Instead, the core exhibits an ultrafast displacement current and a photo-thermoelectric current at the metal Schottky contacts. Our results uncover the optoelectronic dynamics in semiconductor core-shell nanowires comprising quantum wells, and they demonstrate the possibility to use the low-dimensional quantum well states therein for ultrafast photoswitches and photodetectors.

cond-mat.mes-hall↗

arXiv2015

Dynamic acousto-mechanical control of a strongly coupled photonic molecule

Two-dimensional photonic crystal membranes provide a versatile planar architecture for integrated photonics to control the propagation of light on a chip employing high quality optical cavities, waveguides, beamsplitters or dispersive elements. When combined with highly non-linear quantum emitters, quantum photonic networks operating at the single photon level come within reach. Towards large-scale quantum photonic networks, selective dynamic control of individual components and deterministic interactions between different constituents are of paramount importance. This indeed calls for switching speeds ultimately on the system's native timescales. For example, manipulation via electric fields or all-optical means have been employed for switching in nanophotonic circuits and cavity quantum electrodynamics studies. Here, we demonstrate dynamic control of the coherent interaction between two coupled photonic crystal nanocavities forming a photonic molecule. By using an electrically generated radio frequency surface acoustic wave we achieve optomechanical tuning, demonstrate operating speeds more than three orders of magnitude faster than resonant mechanical approaches. Moreover, the tuning range is large enough to compensate for the inherent fabrication-related cavity mode detuning. Our findings open a route towards nanomechanically gated protocols, which hitherto have inhibited the realization in all-optical schemes.

cond-mat.mes-hall↗

arXiv2014

Directional and dynamic modulation of the optical emission of an individual GaAs nanowire using surface acoustic waves

We report on optical experiments performed on individual GaAs nanowires and the ma- nipulation of their temporal emission characteristics using a surface acoustic wave. We find a pronounced, characteristic suppression of the emission intensity for the surface acoustic wave propagation aligned with the axis of the nanowire. Furthermore, we demonstrate that this quenching is dynamical as it shows a pronounced modulation as the local phase of the surface acoustic wave is tuned. These effects are strongly reduced for a SAW applied in the direction perpendicular to the axis of the nanowire due to their inherent one-dimensional geometry. We resolve a fully dynamic modulation of the nanowire emission up to 678 MHz not limited by the physical properties of the nanowires.

cond-mat.mes-hall↗

arXiv2014

Dynamic Acoustic Control of Individual Optically Active Quantum Dot-like Emission Centers in Heterostructure Nanowires

We probe and control the optical properties of emission centers forming in radial het- erostructure GaAs-Al0.3Ga0.7As nanowires and show that these emitters, located in Al0.3Ga0.7As layers, can exhibit quantum-dot like characteristics. We employ a radio frequency surface acoustic wave to dynamically control their emission energy and occupancy state on a nanosec- ond timescale. In the spectral oscillations we identify unambiguous signatures arising from both the mechanical and electrical component of the surface acoustic wave. In addition, differ- ent emission lines of a single quantum dot exhibit pronounced anti-correlated intensity oscilla- tions during the acoustic cycle. These arise from a dynamically triggered carrier extraction out of the quantum dot to a continuum in the radial heterostructure. Using finite element modeling and Wentzel-Kramers-Brillouin theory we identify quantum tunneling as the underlying mech- anism. These simulation results quantitatively reproduce the observed switching and show that in our systems these quantum dots are spatially separated from the continuum by > 10.5 nm.

cond-mat.mes-hall↗

arXiv2014

Radio frequency occupancy state control of a single nanowire quantum dot

The excitonic occupancy state of a single, nanowire-based, heterostructure quantum dot is dynamically programmed by a surface acoustic wave. The quantum dot is formed by an interface or thickness fluctuation of a GaAs QW embedded in a AlGaAs shell of a GaAs-AlGaAs core-shell nanowire. As we tune the time at which carriers are photogenerated during the acoustic cycle, we find pronounced intensity oscillations of neutral and negatively charged excitons. At high acoustic power levels these oscillations become anticorrelated which enables direct acoustic programming of the dot's charge configuration, emission intensity and emission wavelength. Numerical simulations confirm that the observed modulations arise from acoustically controlled modulations of the electron and electron-hole-pair concentrations at the position of the quantum dot.

cond-mat.mes-hall↗

arXiv2013

Acoustically regulated carrier injection into a single optically active quantum dot

We study the carrier injection into a single InGaAs/GaAs quantum dot regulated by a radio frequency surface acoustic wave. We find that the time of laser excitation during the acoustic cycle programs both the emission intensities and time of formation of neutral $(X^0)$ and negatively charged $(X^-)$ excitons. We identify underlying, characteristic formation pathways of both few-particle states in the time-domain experiments and show that both exciton species can be formed either with the optical pump or at later times by injection of single electrons and holes "surfing" the acoustic wave. All experimental observations are in excellent agreement with calculated electron and hole trajectories in the plane of the two-dimensional wetting layer which is dynamically modulated by the acoustically induced piezoelectric potentials. Taken together, our findings provide insight on both the onset of acousto-electric transport of electrons and holes and their conversion into the optical domain after regulated injection into a single quantum dot emitter.

cond-mat.mes-hall↗

arXiv2012

Ion beam synthesis of nanothermochromic diffraction gratings with giant switching contrast at telecom wavelengths

Nanothermochromic diffraction gratings based on the metal-insulator transition of $\mathrm{VO_2}$ are fabricated by site-selective ion beam implantation in a $\mathrm{SiO_2}$ matrix. Gratings were defined either (i) directly by spatially selective ion beam synthesis or (ii) by site-selective deactivation of the phase transition by ion beam induced defects. The strongest increase of the diffracted light intensities was observed at a wavelength of 1550\,nm exceeding a factor of 20 for the selectively deactivated gratings. The observed pronounced thermal hysteresis extending down close to room temperature makes this system ideally suited for optical memory applications.

cond-mat.mtrl-sci↗

arXiv2012

Surface acoustic wave mediated carrier injection into individual quantum post nano emitters

Acousto-electric charge conveyance induced by a surface acoustic wave is employed to dissociate photogenerated excitons. Over macroscopic distances, both electrons and holes are injected \emph{sequentially} into a remotely positioned, isolated and high-quality quantum emitter, a self-assembled quantum post. This process is found to be highly efficient and to exhibit improved stability at high acoustic powers when compared to direct optical pumping at the position of the quantum post. These characteristics are attributed to the wide matrix quantum well in which charge conveyance occurs and to the larger number of carriers available for injection in the remote configuration, respectively. The emission of such pumped quantum posts is dominated by recombination of neutral excitons and fully directional when the propagation direction of the SAW and the position of the quantum post are reversed.

cond-mat.mes-hall↗

arXiv2012

Dynamic modulation of photonic crystal nanocavities using gigahertz acoustic phonons

Photonic crystal membranes (PCM) provide a versatile planar platform for on-chip implementations of photonic quantum circuits. One prominent quantum element is a coupled system consisting of a nanocavity and a single quantum dot (QD) which forms a fundamental building block for elaborate quantum information networks and a cavity quantum electrodynamic (cQED) system controlled by single photons. So far no fast tuning mechanism is available to achieve control within the system coherence time. Here we demonstrate dynamic tuning by monochromatic coherent acoustic phonons formed by a surface acoustic wave (SAW) with frequencies exceeding 1.7 gigahertz, one order of magnitude faster than alternative approaches. We resolve a periodic modulation of the optical mode exceeding eight times its linewidth, preserving both the spatial mode profile and a high quality factor. Since PCMs confine photonic and phononic excitations, coupling optical to acoustic frequencies, our technique opens ways towards coherent acoustic control of optomechanical crystals.

cond-mat.mes-hall↗

arXiv2012

Surface acoustic wave controlled charge dynamics in a thin InGaAs quantum well

We experimentally study the optical emission of a thin quantum well and its dynamic modulation by a surface acoustic wave (SAW). We observe a characteristic transition of the modulation from one maximum to two maxima per SAW cycle as the acoustic power is increased which we find in good agreement with numer- ical calculations of the SAW controlled carrier dynamics. At low acoustic powers the carrier mobilites limit electron-hole pair dissociation, whereas at high power levels the induced electric fields give rise to efficient acousto-electric carrier transport. The direct comparison between the experimental data and the numerical simulations provide an absolute calibration of the local SAW phase.

cond-mat.mes-hall↗

arXiv2011

Surface acoustic wave controlled carrier injection into self-assembled quantum dots and quantum posts

We report on recent progress in the acousto-electrical control of self-assembled quantum dot and quantum post using radio frequency surface acoustic waves (SAWs). We show that the occupancy state of these optically active nanostructures can be controlled via the SAW-induced dissociation of photogenerated excitons and the resulting sequential bipolar carrier injection which strongly favors the formation of neutral excitons for quantum posts in contrast to conventional quantum dots. We demonstrate high fidelity preparation of the neutral biexciton which makes this approach suitable for deterministic entangled photon pair generation. The SAW driven acoustic charge conveyance is found to be highly efficient within the wide quantum well surrounding the quantum posts. Finally we present the direct observation of acoustically triggered carrier injection into remotely positioned, individual quantum posts which is required for a low-jitter SAW-triggered single photon source.

cond-mat.mes-hall↗

arXiv2010

Enhanced sequential carrier capture into individual quantum dots and quantum posts controlled by surface acoustic waves

Individual self-assembled Quantum Dots and Quantum Posts are studied under the influence of a surface acoustic wave. In optical experiments we observe an acoustically induced switching of the occupancy of the nanostructures along with an overall increase of the emission intensity. For Quantum Posts, switching occurs continuously from predominantely charged excitons (dissimilar number of electrons and holes) to neutral excitons (same number of electrons and holes) and is independent on whether the surface acoustic wave amplitude is increased or decreased. For quantum dots, switching is non-monotonic and shows a pronounced hysteresis on the amplitude sweep direction. Moreover, emission of positively charged and neutral excitons is observed at high surface acoustic wave amplitudes. These findings are explained by carrier trapping and localization in the thin and disordered two-dimensional wetting layer on top of which Quantum Dots nucleate. This limitation can be overcome for Quantum Posts where acoustically induced charge transport is highly efficient in a wide lateral Matrix-Quantum Well.

cond-mat.mes-hall↗