arXiv subjects

Huixin Guo

Publications and source records attributed to Huixin Guo.

11 recordsLinked to original sources

arXiv2025

Chirality Imprinting and Spin-texture Tunability in Conformally Coated 3D Magnetic Nanostructured Metamaterials

Three-dimensional (3D) magnetic nanostructures offer unprecedented opportunities for engineering emergent spin textures, but controlling their configuration remains a central challenge. Here we show that conformally coated Ni Nanotubes arranged in a woodpile geometry with lattice spacings ranging from 800 to 1200 nm, realised by two-photon lithography and atomic layer deposition, exhibit a geometry-tuneable balance between chiral and axial states. Magnetic force microscopy on the top layer of the 3D woodpile reveals that few-layer systems exhibit a chiral contrast whilst increasing the number of stacked layers drives a transition to an axial configuration with the change in state populations depending strongly on lattice spacing. Micromagnetic simulations demonstrate that chirality is not intrinsic to isolated tubes but is imprinted by spin textures formed in the substrate sheet film, which couple into the 3D network. As the sheet-film influence diminishes with increasing layer number, dipolar interactions dominate and stabilise the axial state. This two-stage mechanism of chirality imprinting followed by increasingly dominant dipolar interactions, provides clear control parameters for tailoring spin-texture populations. Our results establish conformally coated woodpiles as a reconfigurable 3D ferromagnetic metamaterial platform that can be exploited for data storage, magnonics, and neuromorphic computing.

cond-mat.mes-hall↗

arXiv2025

Coherent Spin Waves in Curved Ferromagnetic Nanocaps of a 3D-printed Magnonic Crystal

Coherent magnon modes in a truly three-dimensional (3D) magnonic crystal have not yet been investigated. This scientific gap exists despite the numerous theoretical predictions about miniband formation and edge modes with topological protection. Such properties are key to advance nanomagnonics for ultrafast data processing. In this work, we use a scalable nanotechnology and integrate a 3D magnonic crystal to an on-chip microresonator. It was fabricated by two-photon lithography of a 3D woodpile structure and atomic layer deposition of 30-nm-thick nickel. Operated near 14 and 24~GHz, the microresonator output revealed numerous coherent magnons with distinct angular dependencies reflecting the underlying face-centred cubic lattice. Micromagnetic simulations show that the edge modes are localised in curved nanocaps and robust against changes in field orientation. Along an edge, they exhibit an unexpected phase evolution. Our findings advance functional microwave circuits with 3D magnonic crystals and fuel their visionary prospects of edge-dominated magnon modes.

cond-mat.mes-hall↗

arXiv2024

Room temperature realization of artificial chiral magnets with reprogrammable magnon nonreciprocity at zero field

Chiral magnets are materials which possess unique helical arrangements of magnetic moments, which give rise to nonreciprocal transport and fascinating physics phenomena. On the one hand, their exploration is guided by the prospects of unconventional signal processing, computation schemes and magnetic memory. On the other hand, progress in applications is hindered by the challenging materials synthesis, limited scalability and typically low critical temperature. Here, we report the creation and exploration of artificial chiral magnets (ACMs) at room temperature. By employing a mass production compatible deposition technology, we synthesize ACMs, which consist of helical Ni surfaces on central cylinders. Using optical microscopy, we reveal nonreciprocal magnon transport at GHz frequencies. It is controlled by programmable toroidal moments which result from the ACM's geometrical handedness and field-dependent spin chirality. We present materials-by-design rules which optimize the helically curved ferromagnets for 3D nonreciprocal transport at room temperature and zero magnetic field.

cond-mat.mtrl-sci↗

arXiv2021

Electric-Field-Controlled Antiferromagnetic Spintronic Devices

In recent years, the field of antiferromagnetic spintronics has been substantially advanced. Electric-field control is a promising approach to achieving ultra-low power spintronic devices via suppressing Joule heating. In this article, cutting-edge research, including electric-field modulation of antiferromagnetic spintronic devices using strain, ionic liquids, dielectric materials, and electrochemical ionic migration, are comprehensively reviewed. Various emergent topics such as the Neel spin-orbit torque, chiral spintronics, topological antiferromagnetic spintronics, anisotropic magnetoresistance, memory devices, two-dimensional magnetism, and magneto-ionic modulation with respect to antiferromagnets are examined. In conclusion, we envision the possibility of realizing high-quality room-temperature antiferromagnetic tunnel junctions, antiferromagnetic spin logic devices, and artificial antiferromagnetic neurons. It is expected that this work provides an appropriate and forward-looking perspective that will promote the rapid development of this field.

cond-mat.mes-hall↗

arXiv2021

Giant Piezospintronic Effect in a Noncollinear Antiferromagnetic Metal

One of the main bottleneck issues for room-temperature antiferromagnetic spintronic devices is the small signal read-out owing to the limited anisotropic magnetoresistance in antiferromagnets. However, this could be overcome by either utilizing the Berry-curvature-induced anomalous Hall resistance in noncollinear antiferromagnets or establishing tunnel junction devices based on effective manipulation of antiferromagnetic spins. In this work, we demonstrate the giant piezoelectric strain control of the spin structure and the anomalous Hall resistance in a noncollinear antiferromagnetic metal - D019 hexagonal Mn3Ga. Furthermore, we built tunnel junction devices with a diameter of 200 nm to amplify the maximum tunneling resistance ratio to more than 10% at room-temperature, which thus implies significant potential of noncollinear antiferromagnets for large signal-output and high-density antiferromagnetic spintronic device applications.

cond-mat.mes-hall↗

arXiv2021

Observation of the Anomalous Hall Effect in a Collinear Antiferromagnet

Time-reversal symmetry breaking is the basic physics concept underpinning many magnetic topological phenomena such as the anomalous Hall effect (AHE) and its quantized variant. The AHE has been primarily accompanied by a ferromagnetic dipole moment, which hinders the topological quantum states and limits data density in memory devices, or by a delicate noncollinear magnetic order with strong spin decoherence, both limiting their applicability. A potential breakthrough is the recent theoretical prediction of the AHE arising from collinear antiferromagnetism in an anisotropic crystal environment. This new mechanism does not require magnetic dipolar or noncollinear fields. However, it has not been experimentally observed to date. Here we demonstrate this unconventional mechanism by measuring the AHE in an epilayer of a rutile collinear antiferromagnet RuO$_2$. The observed anomalous Hall conductivity is large, exceeding 300 S/cm, and is in agreement with the Berry phase topological transport contribution. Our results open a new unexplored chapter of time-reversal symmetry breaking phenomena in the abundant class of collinear antiferromagnetic materials.

cond-mat.mtrl-sci↗

arXiv2021

A two-dimensional electron gas based on a 5s oxide with high room-temperature mobility and strain sensitivity

The coupling of optical and electronic degrees of freedom together with quantum confinement in low-dimensional electron systems is particularly interesting for achieving exotic functionalities in strongly correlated oxide electronics. Recently, high room-temperature mobility has been achieved for a large bandgap transparent oxide - BaSnO$_3$ upon extrinsic La or Sb doping, which has excited significant research attention. In this work, we report the observation of room-temperature ferromagnetism in BaSnO$_3$ thin films and the realization of a two-dimensional electron gas (2DEG) on the surface of transparent BaSnO$_3$ via oxygen vacancy creation, which exhibits a high carrier density of $\sim 7.72*10^{14} /{\rm cm}^2$ and a high room-temperature mobility of ~18 cm$^2$/V/s. Such a 2DEG is rather sensitive to strain and a less than 0.1% in-plane biaxial compressive strain leads to a giant resistance enhancement of 350% (more than 540 kOhm/Square) at room temperature. Thus, this work creates a new path to exploring the physics of low-dimensional oxide electronics and devices applicable at room temperature.

cond-mat.str-el↗

arXiv2020

Noncollinear Spintronics and Electric-Field Control: A Review

Our world is composed of various materials with different structures, where spin structures have been playing a pivotal role in spintronic devices of the contemporary information technology. Apart from conventional collinear spin materials such as collinear ferromagnets and collinear antiferromagnetically coupled materials, noncollinear spintronic materials have emerged as hot spots of research attention owing to exotic physical phenomena. In this Review, we firstly introduce two types noncollinear spin structures, i.e., the chiral spin structure that yields real-space Berry phases and the coplanar noncollinear spin structure that could generate momentum-space Berry phases, and then move to relevant novel physical phenomena including topological Hall effect, anomalous Hall effect, multiferroic, Weyl fermions, spin-polarized current, and spin Hall effect without spin-orbit coupling in these noncollinear spin systems. Afterwards, we summarize and elaborate the electric-field control of the noncollinear spin structure and related physical effects, which could enable ultralow power spintronic devices in future. In the final outlook part, we emphasize the importance and possible routes for experimentally detecting the intriguing theoretically predicted spin-polarized current, verifying the spin Hall effect in the absence of spin-orbit coupling and exploring the anisotropic magnetoresistance and domain-wall-related magnetoresistance effects for noncollinear antiferromagnetic materials.

cond-mat.mes-hall↗

arXiv2019

Integration of the Noncollinear Antiferromagnetic Metal Mn3Sn onto Ferroelectric Oxides for Electric-Field Control

Non-collinear antiferromagnetic materials have received dramatically increasing attention in the field of spintronics as their exotic topological features such as the Berry-curvature-induced anomalous Hall effect and possible magnetic Weyl states could be utilized in future topological antiferromagnetic spintronic devices. In this work, we report the successful integration of the antiferromagnetic metal Mn3Sn thin films onto ferroelectric oxide PMN-PT. By optimizing growth, we realized the large anomalous Hall effect with small switching magnetic fields of several tens mT fully comparable to those of bulk Mn3Sn single crystals, anisotropic magnetoresistance and negative parallel magnetoresistance in Mn3Sn thin films with antiferromagnetic order, which are similar to the signatures of the Weyl state in bulk Mn3Sn single crystals. More importantly, we found that the anomalous Hall effect in antiferromagnetic Mn3Sn thin films can be manipulated by electric fields applied onto the ferroelectric materials, thus demonstrating the feasibility of Mn3Sn-based topological spintronic devices operated in an ultralow power manner.

cond-mat.mtrl-sci↗

arXiv2019

Antiferromagnetic Piezospintronics

Antiferromagnets naturally exhibit three obvious advantages over ferromagnets for memory device applications: insensitivity to external magnetic fields, much faster spin dynamics (~THz) and higher packing density due to the absence of any stray field. Recently, antiferromagnetic spintronics emerges as a cutting-edge field in the magnetic community. The key mission of this rapidly rising field is to steer the spins or spin axes of antiferromagnets via external stimuli and then realize advanced devices based on their physical property changes. Herein, the state of the art of antiferromagnetic spintronics is presented. Subsequently, the history of ferromagnetic/ferroelectric multiferroic composites is briefly revisited. Finally, we introduce an ultralow-power, long-range, and magnetic-field-insensitive approach for harnessing antiferromagnetic spins based on our recent experimental progress, i.e., piezoelectric strain control. Relevant theoretical and experimental studies have formed an attractive new branch in antiferromagnetic spintronics, which we coin as antiferromagnetic piezospintronics.

cond-mat.mes-hall↗

arXiv2019

A Piezoelectric, Strain-Controlled Antiferromagnetic Memory Insensitive to Magnetic Fields

Spintronic devices based on antiferromagnetic (AFM) materials hold the promise of fast switching speeds and robustness against magnetic fields. Different device concepts have been predicted and experimentally demonstrated, such as low-temperature AFM tunnel junctions that operate as spin-valves, or room-temperature AFM memory, for which either thermal heating in combination with magnetic fields, or Néel spin-orbit torque is used for the information writing process. On the other hand, piezoelectric materials were employed to control magnetism by electric fields in multiferroic heterostructures, which suppresses Joule heating caused by switching currents and may enable low energy-consuming electronic devices. Here, we combine the two material classes to explore changes of the resistance of the high-Néel-temperature antiferromagnet MnPt induced by piezoelectric strain. We find two non-volatile resistance states at room temperature and zero electric field, which are stable in magnetic fields up to 60 T. Furthermore, the strain-induced resistance switching process is insensitive to magnetic fields. Integration in a tunnel junction can further amplify the electroresistance. The tunneling anisotropic magnetoresistance reaches ~11.2% at room temperature. Overall, we demonstrate a piezoelectric, strain-controlled AFM memory which is fully operational in strong magnetic fields and has potential for low-energy and high-density memory applications.

cond-mat.mtrl-sci↗