arXiv subjects

Ian A. Young

Publications and source records attributed to Ian A. Young.

At least 19 recordsLinked to original sources

arXiv2025

Material-Limited Switching in Nanoscale Ferroelectrics

The ferroelectric switching speed has been experimentally obfuscated by the interaction between the measurement circuit and the ferroelectric switching itself. This has prohibited the observation of real material responses at nanosecond timescales and lower. Here, fundamental polarization switching speeds in ferroelectric materials with the perovskite, fluorite, and wurtzite structures are reported. Upon lateral scaling of island capacitors from micron to nanoscales, a clear transition from circuit-limited switching to a material-limited switching regime is observed. In La$_{0.15}$Bi$_{0.85}$FeO$_{3}$ capacitors, switching is as fast as ~150 ps, the fastest switching time reported. For polycrystalline Hf$_{0.5}$Zr$_{0.5}$O$_{2}$ capacitors, a fundamental switching limit of ~210 ps is observed. Switching times for Al$_{0.92}$B$_{0.08}$N are near 20 ns, limited by the coercive and breakdown electric fields. The activation field, instantaneous pseudo-resistivity, and energy-delay are reported in this material-limited regime. Lastly, a criterion for reaching the material-limited regime is provided. This regime enables observation of intrinsic material properties and favorable scaling trends for high-performance computing.

cond-mat.mtrl-sci↗

arXiv2024

Voltage-based magnetization switching and reading in magnetoelectric spin-orbit nanodevices

As CMOS technologies face challenges in dimensional and voltage scaling, the demand for novel logic devices has never been greater, with spin-based devices offering scaling potential, at the cost of significantly high switching energies. Alternatively, magnetoelectric materials are predicted to enable low-power magnetization control, a solution with limited device-level results. Here, we demonstrate voltage-based magnetization switching and reading in nanodevices at room temperature, enabled by exchange coupling between multiferroic BiFeO$_3$ and ferromagnetic CoFe, for writing, and spin-to-charge current conversion between CoFe and Pt, for reading. We show that upon the electrical switching of the BiFeO$_3$, the magnetization of the CoFe can be reversed, giving rise to different voltage outputs. Through additional microscopy techniques, magnetization reversal is linked with the polarization state and antiferromagnetic cycloid propagation direction in the BiFeO$_3$. This study constitutes the building block for magnetoelectric spin-orbit logic, opening a new avenue for low-power beyond-CMOS technologies.

cond-mat.mes-hall↗

arXiv2024

Kinetic control of ferroelectricity in ultrathin epitaxial Barium Titanate capacitors

Ferroelectricity is characterized by the presence of spontaneous and switchable macroscopic polarization. Scaling limits of ferroelectricity have been of both fundamental and technological importance, but the probes of ferroelectricity have often been indirect due to confounding factors such as leakage in the direct electrical measurements. Recent interest in low-voltage switching electronic devices squarely puts the focus on ultrathin limits of ferroelectricity in an electronic device form, specifically on the robustness of ferroelectric characteristics such as retention and endurance for practical applications. Here, we illustrate how manipulating the kinetic energy of the plasma plume during pulsed laser deposition can yield ultrathin ferroelectric capacitor heterostructures with high bulk and interface quality, significantly low leakage currents and a broad "growth window". These heterostructures venture into previously unexplored aspects of ferroelectric properties, showcasing ultralow switching voltages ($<$0.3 V), long retention times ($>$10$^{4}$s), and high endurance ($>$10$^{11}$cycles) in 20 nm films of the prototypical perovskite ferroelectric, BaTiO$_{3}$. Our work demonstrates that materials engineering can push the envelope of performance for ferroelectric materials and devices at the ultrathin limit and opens a direct, reliable and scalable pathway to practical applications of ferroelectrics in ultralow voltage switches for logic and memory technologies.

physics.app-ph↗

arXiv2023

Quantification of spin-charge interconversion in highly resistive sputtered Bi$_x$Se$_{1-x}$ with non-local spin valves

The development of spin-orbitronic devices, such as magneto-electric spin-orbit logic devices, calls for materials with a high resistivity and a high spin-charge interconversion efficiency. One of the most promising candidates in this regard is sputtered Bi$_x$Se$_{1-x}$. Although there are several techniques to quantify spin-charge interconversion, to date reported values for sputtered Bi$_x$Se$_{1-x}$ have often been overestimated due to spurious effects related to local currents combined with a lack of understanding of the effect of the interfaces and the use of approximations for unknown parameters, such as the spin diffusion length. In the present study, non-local spin valves are used to inject pure spin currents into Bi$_x$Se$_{1-x}$, allowing us to directly obtain its spin diffusion length as well as its spin Hall angle, from 10 K up to 300 K. These values, which are more accurate than those previously reported in sputtered Bi$_x$Se$_{1-x}$, evidence that the efficiency of this material is not exceptional. Indeed, the figure of merit for spin-charge interconversion, given by the product of these two parameters, is slightly under 1 nm. Our work demonstrates the importance of considering all material parameters and interfaces when quantifying the spin transport properties of materials with strong spin-orbit coupling.

cond-mat.mes-hall↗

arXiv2023

Understanding magnetoelectric switching in BiFeO$_3$ thin films

In this work we use a phenomenological theory of ferroelectric switching in BiFeO$_3$ thin films to uncover the mechanism of the two-step process that leads to the reversal of the weak magnetization of these materials. First, we introduce a realistic model of a BiFeO$_3$ film, including the Landau energy of isolated domains as well as the constraints that account for the presence of the substrate and the multidomain configuration found experimentally. We use this model to obtain statistical information about the switching behavior - by running dynamical simulations based on the Landau-Khalatnikov time-evolution equation, including thermal fluctuations - and we thus identify the factors that drive the two-step polarization reversal observed in the experiments. Additionally, we apply our model to test potential strategies for optimizing the switching characteristics.

cond-mat.mtrl-sci↗

arXiv2022

All-electrical spin-to-charge conversion in sputtered Bi$_x$Se$_{1-x}$

One of the major obstacles to realizing spintronic devices such as MESO logic devices is the small signal magnitude used for magnetization readout, making it important to find materials with high spin-to-charge conversion efficiency. Although intermixing at the junction of two materials is a widely occurring phenomenon, its influence on material characterization and the estimation of spin-to-charge conversion efficiencies is easily neglected or underestimated. Here, we demonstrate all electrical spin-to-charge conversion in Bi$_x$Se$_{1-x}$ nanodevices and show how the conversion efficiency can be overestimated by tens of times depending on the adjacent metal used as a contact. We attribute this to the intermixing-induced compositional change and the properties of a polycrystal that lead to drastic changes in resistivity and spin Hall angle. Strategies to improve the spin-to-charge conversion signal in similar structures for functional devices are discussed.

cond-mat.mes-hall↗

arXiv2022

Spin Torque Generated by Valley Hall Effect in WSe2

Monolayer transition metal dichalcogenides are promising materials for spintronics due to their robust spin-valley locked valence states, enabling efficient charge-to-spin conversion via valley Hall effect with non-equilibrium spins possessing long spin diffusion lengths of hundreds of nanometers. In this work, we show that the injection of a pure valley current, induced by valley Hall effect in a WSe2 monolayer, imparts a spin torque on the magnetization of an overlaid Fe or CoFe in a tunneling structure. The torque efficiency is found to be comparable to that in conventional perpendicular magnetic tunnel junctions and can be further optimized with valley Hall angle in WSe2. The valley nature of the spin torque gives rise to out-of-plane damping-like torques in a current-in-plane configuration, vanishing charge transport perpendicular-to-the-plane as well as torque efficiency tunable through gating.

cond-mat.mes-hall↗

arXiv2022

First-principles Landau-like potential for BiFeO$_3$ and related materials

In this work we introduce the simplest, lowest-order Landau-like potential for BiFeO$_3$ and La-doped BiFeO$_3$ as an expansion around the paraelectric cubic phase in powers of polarization, FeO$_6$ octahedral rotations and strains. We present an analytical approach for computing the model parameters from density functional theory. We illustrate our approach by computing the potentials for BiFeO$_3$ and La$_{0.25}$Bi$_{0.75}$FeO$_3$ and show that, overall, we are able to capture the first-principles results accurately. The computed models allow us to identify and explain the main interactions controlling the relative stability of the competing low-energy phases of these compounds.

cond-mat.mtrl-sci↗

arXiv2021

Physics-Based Models for Magneto-Electric Spin-Orbit Logic Circuits

Spintronic devices are a promising beyond-CMOS device option thanks to their energy efficiency and compatibility with CMOS. To accurately capture their multi-physics dynamics, a rigorous treatment of both spin and charge and their inter-conversion is required. Here we present physics-based device models based on 4x4 matrices for the spin-orbit coupling part of the magneto-electric spin-orbit (MESO) device. Also, a more rigorous physics model of ferroelectric and magnetoelectric switching of ferromagnets, based on Landau-Lifshitz-Gilbert (LLG) and Landau-Khalatnikov (LK) equations, is presented. With the combined model implemented in a SPICE circuit simulator environment, simulation results were obtained which show feasibility of MESO implementation and functional operation of buffers, oscillators, and majority gates.

cond-mat.mes-hall↗

arXiv2021

Spin-charge interconversion in KTaO$_3$ two-dimensional electron gases

Oxide interfaces exhibit a broad range of physical effects stemming from broken inversion symmetry. In particular, they can display non-reciprocal phenomena when time reversal symmetry is also broken, e.g., by the application of a magnetic field. Examples include the direct and inverse Edelstein effects (DEE, IEE) that allow the interconversion between spin currents and charge currents. The DEE and IEE have been investigated in interfaces based on the perovskite SrTiO$_3$ (STO), albeit in separate studies focusing on one or the other. The demonstration of these effects remains mostly elusive in other oxide interface systems despite their blossoming in the last decade. Here, we report the observation of both the DEE and IEE in a new interfacial two-dimensional electron gas (2DEG) based on the perovskite oxide KTaO$_3$. We generate 2DEGs by the simple deposition of Al metal onto KTaO$_3$ single crystals, characterize them by angle-resolved photoemission spectroscopy and magnetotransport, and demonstrate the DEE through unidirectional magnetoresistance and the IEE by spin-pumping experiments. We compare the spin-charge interconversion efficiency with that of STO-based interfaces, relate it to the 2DEG electronic structure, and give perspectives for the implementation of KTaO$_3$ 2DEGs into spin-orbitronic devices.

cond-mat.mes-hall↗

arXiv2021

Metal/SrTiO$_3$ two-dimensional electron gases for spin-to-charge conversion

SrTiO$_3$-based two-dimensional electron gases (2DEGs) can be formed through the deposition of epitaxial oxides like LaAlO$_3$ or of reactive metals such as Al. Such 2DEGs possess a finite Rashba spin-orbit coupling that has recently been harnessed to interconvert charge and spin currents through the direct and inverse Edelstein and spin Hall effects. Here we compare the formation and properties of 2DEGs generated in SrTiO$_3$ by the growth of Al, Ta and Y ultrathin films by magnetron sputtering. By combining in situ and ex situ X-ray photoelectron spectroscopy (XPS) we gain insight into the reduction of the SrTiO$_3$ and the appearance of Ti$^{3+}$ states associated with 2DEG formation, its reoxidation by exposure to the air, and the transformation of the metal into its binary oxides. We extract the carrier densities through magnetotransport and compare them with the XPS data. Finally, working with samples covered by an extra layer of NiFe, we perform spin-pumping ferromagnetic resonance experiments and investigate spin-charge conversion as a function of gate voltage. We identify trends in the data across the different sample systems and discuss them as a function of the carrier density and the transparency of the metal oxide tunnel barrier.

cond-mat.mes-hall↗

arXiv2020

Physical Mechanism behind the Hysteresis-free Negative Capacitance Effect in Metal-Ferroelectric-Insulator-Metal Capacitors with Dielectric Leakage and Interfacial Trapped Charges

The negative capacitance (NC) stabilization of a ferroelectric (FE) material can potentially provide an alternative way to further reduce the power consumption in ultra-scaled devices and thus has been of great interest in technology and science in the past decade. In this article, we present a physical picture for a better understanding of the hysteresis-free charge boost effect observed experimentally in metal-ferroelectric-insulator-metal (MFIM) capacitors. By introducing the dielectric (DE) leakage and interfacial trapped charges, our simulations of the hysteresis loops are in a strong agreement with the experimental measurements, suggesting the existence of an interfacial oxide layer at the FE-metal interface in metal-ferroelectric-metal (MFM) capacitors. Based on the pulse switching measurements, we find that the charge enhancement and hysteresis are dominated by the FE domain viscosity and DE leakage, respectively. Our simulation results show that the underlying mechanisms for the observed hysteresis-free charge enhancement in MFIM may be physically different from the alleged NC stabilization and capacitance matching. Moreover, the link between Merz's law and the phenomenological kinetic coefficient is discussed, and the possible cause of the residual charges observed after pulse switching is explained by the trapped charge dynamics at the FE-DE interface. The physical interpretation presented in this work can provide important insights into the NC effect in MFIM capacitors and future studies of low-power logic devices.

physics.app-ph↗

arXiv2020

A micromagnetic study of the switching dynamics of the BiFeO$_3$/CoFe heterojunction

The switching dynamics of a single-domain BiFeO3/CoFe heterojunction is modeled and key parameters such as interface exchange coupling coefficient are extracted from experimental results. The lower limit of the magnetic order response time of CoFe in the BiFeO3/CoFe heterojunction is theoretically quantified to be on to the order of 100 ps. Our results indicate that the switching behavior of CoFe in the BiFeO3/CoFe heterojunction is dominated by the rotation of the Neel vector in BiFeO3 rather than the unidirectional exchange bias at the interface. We also quantify the magnitude of the interface exchange coupling coefficient J_int to be 0.32 pJ/m by comparing our simulation results with the giant magnetoresistance (GMR) curves and the magnetic hysteresis loop in the experiments. To the best of our knowledge, this is the first time that J_int is extracted quantitatively from experiments. Furthermore, we demonstrate that the switching success rate and the thermal stability of the BiFeO3/CoFe heterojunction can be improved by reducing the thickness of CoFe and increasing the length to width aspect ratio of the BiFeO3/CoFe heterojunction. Our theoretical model provides a comprehensive framework to study the magnetoelectric properties and the manipulation of the magnetic order of CoFe in the BiFeO3/CoFe heterojunction.

cond-mat.mtrl-sci↗

arXiv2019

Multi-domain Characterization of Ferroelectric Switching Dynamics with a Physics-based SPICE Circuit Model for Phase Field Simulations

In this paper, the multi-domain nature of ferroelectric (FE) polarization switching dynamics in a metal-ferroelectric-metal (MFM) capacitor is explored through a physics-based phase field approach, where the three-dimensional time-dependent Ginzburg-Landau (TDGL) equation and Poisson's equation are self-consistently solved with the SPICE simulator. Systematically calibrated based on the experimental measurements, the model well captures transient negative capacitance in pulse switching dynamics, with domain interaction and viscosity being the key parameters. It is found that the influence of pulse amplitudes on voltage transient behaviors can be attributed to the fact that the FE free energy profile strongly depends on how the domains are interacted. This finding has an important implication on the charge-boost induced by stabilization of negative capacitance in an FE + dielectric (DE) stack since the so-called capacitance matching needs to be designed at a specific operation voltage or frequency. In addition, we extract the domain viscosity dynamics during polarization switching according to the experimental measurements. For the first time, a physics-based circuit-compatible SPICE model for multi-domain phase field simulations is established to reveal the effect of domain interaction on the FE energy profile and microscopic domain evolution.

physics.app-ph↗

arXiv2019

Benchmarking Physical Performance of Neural Inference Circuits

Numerous neural network circuits and architectures are presently under active research for application to artificial intelligence and machine learning. Their physical performance metrics (area, time, energy) are estimated. Various types of neural networks (artificial, cellular, spiking, and oscillator) are implemented with multiple CMOS and beyond-CMOS (spintronic, ferroelectric, resistive memory) devices. A consistent and transparent methodology is proposed and used to benchmark this comprehensive set of options across several application cases. Promising architecture/device combinations are identified.

cs.ET↗

arXiv2019

Simulation of the Magnetization Dynamics of a Single Domain BiFeO$_3$ Thin Film

The switching dynamics of a single-domain BiFeO$_3$ thin films is investigated through combining the dynamics of polarization and Neel vector. The evolution of the ferroelectric polarization is described by the Landau-Khalatnikov (LK) equation, and the Landau-Lifshitz-Gilbert (LLG) equations for spins in two sublattices to model the time evolution of the antiferromagnetic order (Neel vector) in a G-type antiferromagnet. This work theoretically demonstrates that due to the rotation of the magnetic hard axis following the polarization reversal, the Neel vector can be switched by 180 degrees, while the weak magnetization can remain unchanged. The simulation results are consistent with the ab initio calculation, where the Neel vector rotates during polarization rotation, and also match our calculation of the dynamics of order parameter using Landau-Ginzburg theory. We also find that the switching time of the Neel vector is determined by the speed polarization switching and is predicted to be as short as 30 ps.

cond-mat.mes-hall↗

arXiv2018

Inversion Charge-boost and Transient Steep-slope induced by Free charge-polarization Mismatch in a Ferroelectric-metal-oxide-semiconductor Capacitor

In this letter, the transient behavior of a ferroelectric (FE) metal-oxide-semiconductor (MOS) capacitor is theoretically investigated with a series resistor. It is shown that compared to a conventional high-k dielectric MOS capacitor, a significant inversion charge-boost can be achieved by a FE MOS capacitor due to a steep transient subthreshold swing (SS) driven by the free charge-polarization mismatch. It is also shown that the observation of steep transient SS significantly depends on the viscosity coefficient under Landau's mean field theory, in general representing the average FE time response associated with domain nucleation and propagation. Therefore, this letter not only establishes a theoretical framework that describes the physical origin behind the inversion charge-boost in a FE MOS capacitor, but also shows that the key feature of depolarization effect on a FE MOS capacitor should be the inversion-charge boost, rather than the steep SS (e.g., sub-60mV/dec at room temperature), which cannot be experimentally observed as the measurement time is much longer than the FE response. Finally, we outlines the required material targets for the FE response in field-effect transistors to be applicable for next-generation high-speed and low-power digital switches.

physics.app-ph↗

arXiv2018

Skyrmion nucleation via localized spin current injection in confined nanowire geometry in low chirality magnetic materials

Magnetic skyrmions have been the focus of intense research with promising applications in memory, logic and interconnect technology. Several schemes have been recently proposed and demonstrated to nucleate skyrmions. However, they either result in an uncontrolled skyrmion bubble production or are mostly targeted towards integration with racetrack memory device. In this work, we propose a novel scheme for a controlled single skyrmion nucleation in a confined nanowire geometry with sub-100 nm width using a generalized approach of "localized spin current injection" technique in material systems exhibiting low Dzyaloshinskii-Moriya interaction (DMI). Our proposed nucleation mechanism follows a pathway involving the creation of a reversed magnetic domain containing one or more pairs of vertical Bloch lines (VBLs) that form an edge-to-edge domain wall as the VBLs get annihilated at the edge of the nanowire. However, pinning of the edge domain walls within a narrow gap using notches or anti-notches results in the creation of a magnetic bubble with defect-free domain wall that eventually relaxes into a circular skyrmion structure. Our simulations predict that the proposed mechanism allows skyrmion nucleation on sub-nanosecond timescale, shows robustness to variations like local pinning sites and is applicable for any skyrmion-based logic, memory and interconnect application.

cond-mat.mes-hall↗