arXiv subjects

Igal Brener

Publications and source records attributed to Igal Brener.

34 records · Page 2Linked to original sources

arXiv2020

Non-Invasive Near-field Spectroscopy of Single Sub-Wavelength Complementary Resonators

Subwavelength metallic resonators provide a route to achieving strong light-matter coupling by means of tight confinement of resonant electromagnetic fields. Investigation of such resonators however often presents experimental difficulties, particularly at terahertz (THz) frequencies. A single subwavelength resonator weakly interacts with THz beams, making it difficult to probe it using far-field methods; whereas arrays of resonators exhibit inter-resonator coupling, which affects the resonator spectral signature and field confinement. Here, traditional far-field THz spectroscopy is systematically compared with aperture-type THz near-field microscopy for investigating complementary THz resonators. Whilst the far-field method proves impractical for measuring single resonators, the near-field technique gives high signal-to-noise spectral information, only achievable in the far-field with resonator arrays. At the same time, the near-field technique allows us to analyze single resonators - free from inter-resonator coupling present in arrays - without significant interaction with the near-filed probe. Furthermore, the near-field technique allows highly confined fields and surface waves to be mapped in space and time. This information gives invaluable insight into resonator spectral response in arrays. This near-field microscopy and spectroscopy method enables investigations of strong light-matter coupling at THz frequencies in the single-resonator regime.

physics.optics↗

arXiv2019

High-harmonic generation from an epsilon-near-zero material

High-harmonic generation (HHG) from a compact, solid-state medium is highly desirable for applications such as coherent attosecond pulse generation and extreme ultra-violet (EUV) spectroscopy, yet the typically weak conversion of pump light to HHG can largely hinder its applications. Here, we use a material operating in its epsilon-near-zero (ENZ) region, where the real part of its permittivity vanishes, to greatly boost the efficiency of the HHG process at the microscopic level. In experiments, we report high-harmonic emission up to the 9th order directly from a low-loss, solid-state ENZ medium: indium-doped cadmium oxide, with an excitation intensity at the GW cm-2 level. Furthermore, the observed HHG signal exhibits a pronounced spectral red-shift as well as linewidth broadening, resulting from the photo-induced electron heating and the consequent time-dependent resonant frequency of the ENZ film. Our results provide a novel nanophotonic platform for strong field physics, reveal new degrees of freedom for spectral and temporal control of HHG, and open up possibilities of compact solid-state attosecond light sources.

physics.app-ph↗

arXiv2017

An optical metamixer

A frequency mixer is a nonlinear device that combines electromagnetic waves to create waves at new frequencies. Mixers are ubiquitous components in modern radio-frequency technology and are widely used in microwave signal processing. The development of versatile frequency mixers for optical frequencies remains challenging: such devices generally rely on weak nonlinear optical processes and, thus, must satisfy phase matching conditions. In this work, we utilize a GaAs-based dielectric metasurface to demonstrate an optical frequency mixer that concurrently generates eleven new frequencies spanning the ultraviolet to near-infrared (NIR) spectral range. Our approach combines strong intrinsic material nonlinearities, enhanced electromagnetic fields, and relaxed phase-matching requirements, to allow seven different nonlinear optical processes to occur simultaneously. Specifically, when pumped by two femtosecond NIR pulses, we observe second-, third- and fourth-harmonic generation, sum-frequency generation, two-photon absorption induced photoluminescence, four-wave mixing, and six-wave mixing. Such ultracompact optical mixers may enable a plethora of applications in biology, chemistry, sensing, communications and quantum optics.

physics.optics↗

arXiv2017

Active tuning of high-Q dielectric metasurfaces

We demonstrate the active tuning of all-dielectric metasurfaces exhibiting high-quality factor (high-Q) resonances. The active control is provided by embedding the asymmetric silicon meta-atoms with liquid crystals, which allows the relative index of refraction to be controlled through heating. It is found that high quality factor resonances ($Q=270\pm30$) can be tuned over more than three resonance widths. Our results demonstrate the feasibility of using all-dielectric metasurfaces to construct tunable narrow-band filters.

physics.optics↗

arXiv2016

Resonantly enhanced second-harmonic generation using III-V semiconductor all-dielectric metasurfaces

Nonlinear optical phenomena in nanostructured materials have been challenging our perceptions of nonlinear optical processes that have been explored since the invention of lasers. For example, the ability to control optical field confinement, enhancement, and scattering almost independently, allows nonlinear frequency conversion efficiencies to be enhanced by many orders of magnitude compared to bulk materials. Also, the subwavelength length scale renders phase matching issues irrelevant. Compared with plasmonic nanostructures, dielectric resonator metamaterials show great promise for enhanced nonlinear optical processes due to their larger mode volumes. Here, we present, for the first time, resonantly enhanced second-harmonic generation (SHG) using Gallium Arsenide (GaAs) based dielectric metasurfaces. Using arrays of cylindrical resonators we observe SHG enhancement factors as large as 104 relative to unpatterned GaAs. At the magnetic dipole resonance we measure an absolute nonlinear conversion efficiency of ~2X10^(-5) with ~3.4 GW/cm2 pump intensity. The polarization properties of the SHG reveal that both bulk and surface nonlinearities play important roles in the observed nonlinear process.

physics.optics↗

arXiv2016

Broken symmetry dielectric resonators for high quality-factor Fano metasurfaces

We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality-factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geoemetries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple "bright" dipole modes to "dark" dipole modes whose radiative decay is suppressed by local field effects in the array. Our approach is widely scalable from the near-infrared to radio frequencies. We first unravel the Fano resonance behavior through numerical simulations of a germanium resonator-based metasurface that achieved a quality-factor of ~1300 at ~10.8 um. Then, we present two experimental demonstrations operating in the near-infrared (~1 um): a silicon-based implementation that achieved a quality-factor of ~350; and a gallium arsenide-based structure that achieves a quality-factor of ~600 - the highest near-infrared quality-factor experimentally demonstrated to date with this kind of metasurfaces. Importantly, large electromagnetic field enhancements appear within the resonators at the Fano resonant frequencies. We envision that combining high-quality factor, high field enhancement resonances with nonlinear and active/gain materials such as gallium arsenide will lead to new classes of active optical devices.

physics.optics↗

arXiv2016

III-V semiconductor nano-resonators-a new strategy for passive, active, and nonlinear all-dielectric metamaterials

Metamaterials comprising assemblies of dielectric resonators have attracted much attention due to their low intrinsic loss and isotropic optical response. In particular, metasurfaces made from silicon dielectric resonators have shown desirable behaviors such as efficient nonlinear optical conversion, spectral filtering and advanced wave-front engineering. To further explore the potential of dielectric metamaterials, we present all-dielectric metamaterials fabricated from epitaxially grown III-V semiconductors that can exploit the high second-order optical susceptibilities of III-V semiconductors, as well as the ease of monolithically integrating active/gain media. Specifically, we create GaAs nano-resonators using a selective wet oxidation process that forms a low refractive index AlGaO (n~1.6) under layer similar to silicon dielectric resonators formed using silicon-on-insulator wafers. We further use the same fabrication processes to demonstrate multilayer III-V dielectric resonator arrays that provide us with new degrees of freedom in device engineering. For these arrays, we experimentally measure ~100% reflectivity over a broad spectral range. We envision that all-dielectric III-V semiconductor metamaterials will open up new avenues for passive, active and nonlinear all dielectric metamaterials

physics.optics↗

arXiv2016

Efficient polarization insensitive complex wavefront control using Huygens' metasurfaces based on dielectric resonant meta-atoms

Subwavelength-thin metasurfaces have shown great promises for the control of optical wavefronts, thus opening new pathways for the development of efficient flat optics. In particular, Huygens' metasurfaces based on all-dielectric resonant meta-atoms have already shown a huge potential for practical applications with their polarization insensitivity and high transmittance efficiency. Here, we experimentally demonstrate a polarization insensitive holographic Huygens' metasurface based on dielectric resonant meta-atoms capable of complex wavefront control at telecom wavelengths. Our metasurface produces a hologram image in the far-field with 82% transmittance efficiency and 40% imaging efficiency. Such efficient complex wavefront control shows that Huygens' metasurfaces based on resonant dielectric meta-atoms are a big step towards practical applications of metasurfaces in wavefront design related technologies, including computer-generated holograms, ultra-thin optics, security and data storage devices.

physics.optics↗

arXiv2014

Directional perfect absorption using deep subwavelength low permittivity films

We experimentally demonstrate single beam directional perfect absorption (to within experimental accuracy) of p-polarized light in the near-infrared using unpatterned, deep subwavelength films of indium tin oxide (ITO) on Ag. The experimental perfect absorption occurs slightly above the epsilon-near-zero (ENZ) frequency of ITO where the permittivity is less than one. Remarkably, we obtain perfect absorption for films whose thickness is as low as ~1/50th of the operating free-space wavelength and whose single pass attenuation is only ~ 5%. We further derive simple analytical conditions for perfect absorption in the subwavelength-film regime that reveal the constraints that the ITO permittivity must satisfy if perfect absorption is to be achieved. Then, to get a physical insight on the perfect absorption properties, we analyze the eigenmodes of the layered structure by computing both the real-frequency/complex-wavenumber and the complex-frequency/real-wavenumber modal dispersion diagrams. These analyses allow us to attribute the experimental perfect absorption behavior to the crossover between bound and leaky behavior of one eigenmode of the layered structure. Both modal methods show that perfect absorption occurs at a frequency slightly larger than the ENZ frequency, in agreement with experimental results, and both methods predict a second perfect absorption condition at higher frequencies attributed to another crossover between bound and leaky behavior of the same eigenmode. Our results greatly expand the list of materials that can be considered for use as ultrathin perfect absorbers and also provide a methodology for the design of absorber systems at any desired frequency.

physics.optics↗

arXiv2014

High-efficiency light-wave control with all-dielectric optical Huygens' metasurfaces

Optical metasurfaces have developed as a breakthrough concept for advanced wave-front engineering enabled by subwavelength resonant nanostructures. However, reflection and/or absorption losses as well as low polarisation-conversion efficiencies pose a fundamental obstacle for achieving high transmission efficiencies that are required for practical applications. Here we demonstrate, for the first time to our knowledge, highly efficient all-dielectric metasurfaces for near-infrared frequencies using arrays of silicon nanodisks as meta-atoms. We employ the main features of Huygens' sources, namely spectrally overlapping electric and magnetic dipole resonances of equal strength, to demonstrate Huygens' metasurfaces with a full transmission-phase coverage of 360 degrees and near-unity transmission, and we confirm experimentally full phase coverage combined with high efficiency in transmission. Based on these key properties, we show that all-dielectric Huygens' metasurfaces could become a new paradigm for flat optical devices, including beam-steering, beam-shaping, and focusing, as well as holography and dispersion control.

physics.optics↗

arXiv2014

Electrodynamic modeling of strong coupling between a metasurface and intersubband transitions in quantum wells

Strong light-matter coupling has recently been demonstrated in sub-wavelength volumes by coupling engineered optical transitions in semiconductor heterostructures (e.g., quantum wells) to metasurface resonances via near fields. It has also been shown that different resonator shapes may lead to different Rabi splittings, though this has not yet been well explained. In this paper, our aim is to understand the correlation between resonator shape and Rabi splitting, and in particular determine and quantify the physical parameters that affect strong coupling by developing an equivalent circuit network model whose elements describe energy and dissipation. Because of the subwavelength dimension of each metasurface element, we resort to the quasi-static (electrostatic) description of the near-field and hence define an equivalent capacitance associated to each dipolar element of a flat metasurface, and we show that this is also able to accurately model the phenomenology involved in strong coupling between the metasurface and the intersubband transitions in quantum wells. We show that the spectral properties and stored energy of a metasurface/quantum-well system obtained using our model are in good agreement with both full-wave simulation and experimental results. We then analyze metasurfaces made of three different resonator geometries and observe that the magnitude of the Rabi splitting increases with the resonator capacitance in agreement with our theory, providing a phenomenological explanation for the resonator shape dependence of the strong coupling process.

physics.optics↗

arXiv2014

Optical Magnetic Mirrors without Metals

The reflection of an optical wave from a metal, arising from strong interactions between the optical electric field and the free carriers of the metal, is accompanied by a phase reversal of the reflected electric field. A far less common route to achieve high reflectivity exploits strong interactions between the material and the optical magnetic field to produce a magnetic mirror which does not reverse the phase of the reflected electric field. At optical frequencies, the magnetic properties required for strong interaction can only be achieved through the use of artificially tailored materials. Here we experimentally demonstrate, for the first time, the magnetic mirror behavior of a low-loss, all-dielectric metasurface at infrared optical frequencies through direct measurements of the phase and amplitude of the reflected optical wave. The enhanced absorption and emission of transverse electric dipoles placed very close to magnetic mirrors can lead to exciting new advances in sensors, photodetectors, and light sources.

physics.optics↗

arXiv2013

Silicon-based Infrared Metamaterials with Ultra-Sharp Fano Resonances

Metamaterials and meta-surfaces represent a remarkably versatile platform for light manipulation, biological and chemical sensing, nonlinear optics, and even spaser lasing. Many of these applications rely on the resonant nature of metamaterials, which is the basis for extreme spectrally selective concentration of optical energy in the near field. The simplicity of free-space light coupling into sharply-resonant meta-surfaces with high resonance quality factors Q>>1 is a significant practical advantage over the extremely angle-sensitive diffractive structures or inherently inhomogeneous high-Q photonic structures such as toroid or photonic crystal microcavities. Such spectral selectivity is presently impossible for the overwhelming majority of metamaterials that are made of metals and suffer from high plasmonic losses. Here, we propose and demonstrate Fano-resonant all-semiconductor optical meta-surfaces supporting optical resonances with quality factors Q>100 that are almost an order of magnitude sharper than those supported by their plasmonic counterparts. These silicon-based structures are shown to be planar chiral, opening exciting possibilities for efficient ultra-thin circular polarizers and narrow-band thermal emitters of circularly polarized radiation.

physics.optics↗

arXiv2013

Probing terahertz surface plasmon waves in graphene structures

Epitaxial graphene mesas and ribbons are investigated using terahertz (THz) nearfield microscopy to probe surface plasmon excitation and THz transmission properties on the sub-wavelength scale. The THz near-field images show variation of graphene properties on a scale smaller than the wavelength, and excitation of THz surface waves occurring at graphene edges, similar to that observed at metallic edges. The Fresnel reflection at the substrate SiC/air interface is also found to be altered by the presence of graphene ribbon arrays, leading to either reduced or enhanced transmission of the THz wave depending on the wave polarization and the ribbon width.

cond-mat.mes-hall↗

arXiv2011

Infrared Dielectric Resonator Metamaterial

We demonstrate, for the first time, an all-dielectric metamaterial resonator in the mid-wave infrared based on high-index tellurium cubic inclusions. Dielectric resonators are desirable compared to conventional metallo-dielectric metamaterials at optical frequencies as they are largely angular invariant, free of ohmic loss, and easily integrated into three-dimensional volumes. With these low-loss, isotropic elements, disruptive optical metamaterial designs, such as wide-angle lenses and cloaks, can be more easily realized.

physics.optics↗

arXiv2011

Interaction between Metamaterial Resonators and Inter-subband transitions in Semiconductor Quantum Wells

We report on the coupling and interaction between the fundamental resonances of planar metamaterials (split ring resonators) and inter-subband transitions in GaAs/AlGaAs quantum wells structures in the mid-infrared. An incident field polarized parallel to the sample surface is converted by the metamaterial resonators into a field with a finite component polarized normal to the surface, and interacts strongly with the large dipole moment associated with quantum well inter-subband transitions.

physics.optics↗