arXiv subjects

Ilangko Balasingham

Publications and source records attributed to Ilangko Balasingham.

At least 19 recordsLinked to original sources

arXiv2026

Advancing Brain-Machine Interfaces: High Data Rate Battery-Free Implants

Implantable wireless brain-machine interfaces (BMI) encounter significant challenges in miniaturization, power consumption, and high data volume. While systems utilizing high resolution microelectrode arrays offer precision brain readout and/or stimulation, achieving high-rate wireless connectivity (32-128 Mbps) consumes excessive power, unsuitable for long-term use with implant batteries. This paper addresses wireless connectivity and power challenges by employing radio frequency backscatter and near-field wireless charging. This approach eliminates transceiver electronics in the implantable, reducing implant power consumption by offloading complexity to off-body reader electronics. It enables wireless powering of implantable neural recording and stimulation chips through magnetic coupling, enabling a fully implantable brain-machine interface. We present preliminary test results for this design scenario, demonstrating the feasibility of our approach.

eess.SP↗

arXiv2026

Safety Analysis of Metasurface-Based Near-field Wireless Power Transfer System for Deep Implant

Wireless power transfer is a method for energizing future implantable medical electronics. In this study, a metasurface-based near-field magnetic wireless power transfer system for deep implants is presented, and electromagnetic safety parameters, including field distributions, specific absorption rate (SAR), and temperature variations, are evaluated. The power transfer is modeled for a receiver implant at a distance of 8.5 cm from the designed metasurface. Based on the results, a maximum localized SAR of 0.072 mW/kg is achieved when the efficiency is 1.62%. Moreover, continuous power transfer shows that the local tissue temperature rises by less than 1.1 degrees Celsius.

eess.SP↗

arXiv2026

Frequency demodulation with magnetoelectric coreshells: A novel approach to enhanced bio-stimulation

Magnetoelectric (ME) coreshell devices have interesting applications in biomedical technologies including biosensing and communication, due to their strong inter-coupling between the magnetostrictive core and the piezoelectric shell. This property could be utilized for specific applications in localized bio-stimulation of cells. This paper provides a conceptual proof of using the non-linear property of ME coreshell devices for frequency demodulation and stimulation. We use the Multiphysics simulation approach, wherein the ME coreshell was biased with a DC magnetic field and perturbed through dual coil alternating magnetic fields. The combined effect of the ME non-linear magnetostriction and the dual coil perturbation resulted in the demodulation of the interference frequency component, that induced equivalent electrical hotspots on the piezoelectric shell. We provide a cross model verification, where the generated electrical current density on the piezo shell was provided as an input to a Hodgkin-Huxley (HH) neural cell model to actively induce membrane potentials on the cell. Future applications as a standalone, battery- and electronics-free, controllable, multi-functional and localized coreshells for targeted drug delivery, backscatter communication and bio-stimulation, is envisioned.

eess.SP↗

arXiv2026

Ultra-wideband statistical propagation channel model for implant sensors in the human chest

Implant medical wireless sensors for monitoring physiological parameters, automatic drug provision, and so on represent a new promising healthcare technology. Inherent characteristics of ultra-wideband (UWB) radio make this technology highly suitable for the wireless interface of implant sensors. A communication channel model is essential for developing these wireless systems. However, there are currently few models describing the radio propagation inside the human body. To address this problem, a statistical model is presented for UWB propagation channels inside the human chest in the 1-6 GHz frequency range. The proposed statistical model is developed from numerical simulations using a heterogeneous anatomical model that includes the frequency-dependent dielectric properties of different human tissues. Mathematical formulas for the computation of path loss, scattering and the statistical implementation of the channel impulse response at different depths inside the chest are described. Two typical depths for implanted sensors in the chest, namely 20 and 80 mm are analysed in detail. Average path loss of approximately 20 and 50 dB is observed in each case, respectively. Moreover, the channel exhibits little time dispersion with a root-mean-square delay spread below 1 ns in both cases. These results aim at facilitating the tasks associated with the design of in-body medical communication systems.

eess.SP↗

arXiv2026

Propagation models for IEEE 802.15.6 standardization of implant communication in body area networks

A body area network is a radio communication protocol for short-range, low-power, and highly reliable wireless communication for use on the surface, inside, or in the peripheral proximity of the human body. Combined with various biomedical sensors, BANs enable realtime collection and monitoring of physiological signals. Therefore, it is regarded as an important technology for the treatment and prevention of chronic diseases, and health monitoring of the elderly. The IEEE 802 LAN/MAN Standards Committee approved Task Group TG15.6 in December 2007. As a result of more than four years of effort, in February 2012, TG15.6 published the first international standard for BANs, IEEE Std 802.15.6. Throughout the development of this standard, ample collaboration between the standardization group and the research community was required. In particular, understanding the radio propagation mechanisms for BANs demanded the most research effort. Technical challenges were magnified for the case of implant communication because of the impossibility of conducting in-body measurements with human subjects. Therefore, research in this field had to make use of intricate computer simulations. This article outlines some of the research that has been done to obtain accurate propagation models supporting the standardization of implant communication in BANs. Current research to enhance the channel models of IEEE Std 802.15.6 through the use of ultra wideband signals for implantable devices along with physical measurements in animals is also presented.

eess.SP↗

arXiv2026

Antenna System for Simultaneous Wireless Power and Information Transfer to Brain Implants

Brain-Computer Interfaces (BCIs) have revolutionized neuroscience applications, from motor rehabilitation to neuroergonomics. Traditional implantable BCIs with invasive microelectrode arrays pose challenges, notably the need for wired connections and inherent implantation risks. This paper introduces a battery-free wireless BCI system, consolidating an implant and its external supporting system. Our design centers on a dual-function antenna system: firstly, an inductive coupling mechanism enables wireless power transfer, sufficiently powering the implant's Application-Specific Integrated Circuit (ASIC) for stimulation and readout without an implant battery. Secondly, a backscatter antenna in the implant facilitates battery-free, high-data-rate wireless connectivity (up to 32 Mbps). This system not only enhances the BCI experience by eliminating wires but also retains data fidelity and energy efficiency, promising a safer, more efficient interface for tasks like robotic arm control.

eess.SP↗

arXiv2025

Electrophoretic Beamforming in Molecular Communication: Toward Targeted Extracellular Vesicle Delivery

Directing extracellular vesicles (EVs), such as exosomes and microvesicles, toward specific cells is an emerging focus in nanomedicine, owing to their natural role as carriers of proteins, RNAs, and drugs. EVs can be manipulated by external electric fields due to their intrinsic surface charge and biophysical properties. This study investigates the feasibility of using extremely low-frequency electromagnetic fields to guide EV transport. A theoretical framework based on the Fokker-Planck equation was developed and numerically solved to model vesicle trajectories under time-harmonic drift. Computational simulations were conducted to systematically assess the influence of key electric field parameters, including phase, frequency, and intensity, on vesicle displacement and trajectory. The findings demonstrate that frequencies below 5 Hz combined with field strengths of 200-2000 V/m can induce substantial directional control of EV motion. Moreover, enhanced directivity was achieved through the application of multi-component electric fields. Overall, this work establishes a theoretical foundation for the external-field-based beamforming of nanoparticles within the framework of molecular communication.

physics.bio-ph↗

arXiv2025

On Drug Delivery System Parameter Optimisation via Semantic Information Theory

We investigate the application of semantic information theory to drug delivery systems (DDS) within the molecular communication (MC) framework. To operationalise this, we observe a DDS as a molecular concentration-based channel. Semantic information is defined as the amount of information required for a DDS to achieve its therapeutic goal in a dynamic environment. We derive it by introducing interventions, defined as modifications to DDS parameters, a viability function, and system-environment correlations quantified via the channel capacity. Here, the viability function represents DDS performance based on a drug dose-response relationship. Our model considers a system capable of inducing functional changes in a receiver cancer cell, where exceeding critical DDS parameter values can significantly reduce performance or cost-effectiveness. By analysing the MC-based DDS model through a semantic information perspective, we examine how correlations between the internalised particle concentration $(Y)$ and the particle concentration in the extracellular environment $(X)$ evolve under interventions. The final catalogue of results provides a quantitative basis for DDS design and optimisation, offering a method to determine optimal DDS parameter values under constraints such as chemical budget, desired effect and accuracy. Thus, the proposed framework can serve as a novel tool for guiding DDS design and optimisation.

cs.IT↗

arXiv2025

Biaxialformer: Leveraging Channel Independence and Inter-Channel Correlations in EEG Signal Decoding for Predicting Neurological Outcomes

Accurate decoding of EEG signals requires comprehensive modeling of both temporal dynamics within individual channels and spatial dependencies across channels. While Transformer-based models utilizing channel-independence (CI) strategies have demonstrated strong performance in various time series tasks, they often overlook the inter-channel correlations that are critical in multivariate EEG signals. This omission can lead to information degradation and reduced prediction accuracy, particularly in complex tasks such as neurological outcome prediction. To address these challenges, we propose Biaxialformer, characterized by a meticulously engineered two-stage attention-based framework. This model independently captures both sequence-specific (temporal) and channel-specific (spatial) EEG information, promoting synergy and mutual reinforcement across channels without sacrificing CI. By employing joint learning of positional encodings, Biaxialformer preserves both temporal and spatial relationships in EEG data, mitigating the interchannel correlation forgetting problem common in traditional CI models. Additionally, a tokenization module with variable receptive fields balance the extraction of fine-grained, localized features and broader temporal dependencies. To enhance spatial feature extraction, we leverage bipolar EEG signals, which capture inter-hemispheric brain interactions, a critical but often overlooked aspect in EEG analysis. Our study broadens the use of Transformer-based models by addressing the challenge of predicting neurological outcomes in comatose patients. Using the multicenter I-CARE data from five hospitals, we validate the robustness and generalizability of Biaxialformer with an average AUC 0.7688, AUPRC 0.8643, and F1 0.6518 in a cross-hospital scenario.

eess.SP↗

arXiv2024

Quantitative Aspects, Engineering and Optimization of Bacterial Sensor Systems

Bacterial sensor systems can be used for the detection and measurement of molecular signal concentrations. The dynamics of the sensor directly depend on the biological properties of the bacterial sensor cells; manipulation of these features in the wet lab enables the engineering and optimization of the bacterial sensor kinetics. This necessitates the development of biologically meaningful computational models for bacterial sensors comprising a variety of different molecular mechanisms, which further facilitates a systematic and quantitative evaluation of optimization strategies. In this work, we dissect the detection chain of bacterial sensors from a mathematical perspective from which we derive, supported by wet-lab data, a complete computational model for a Streptococcus mutans-based bacterial sensor as a case example. We address the engineering of bacterial sensors by investigating the impact of altered bacterial cell properties on the sensor response characteristics, specifically sensor sensitivity and response signal intensity. This is achieved through a sensitivity analysis targeting both the steady-state and transient sensor response characteristics. Alongside the demonstration of suitability of our methodological approach, our analysis shows that an increase of sensor sensitivity, through a targeted manipulation of bacterial physiology, often comes at the cost of generally diminished sensor response intensity.

q-bio.MN↗

arXiv2024

Deep Learning for Improved Polyp Detection from Synthetic Narrow-Band Imaging

To cope with the growing prevalence of colorectal cancer (CRC), screening programs for polyp detection and removal have proven their usefulness. Colonoscopy is considered the best-performing procedure for CRC screening. To ease the examination, deep learning based methods for automatic polyp detection have been developed for conventional white-light imaging (WLI). Compared with WLI, narrow-band imaging (NBI) can improve polyp classification during colonoscopy but requires special equipment. We propose a CycleGAN-based framework to convert images captured with regular WLI to synthetic NBI (SNBI) as a pre-processing method for improving object detection on WLI when NBI is unavailable. This paper first shows that better results for polyp detection can be achieved on NBI compared to a relatively similar dataset of WLI. Secondly, experimental results demonstrate that our proposed modality translation can achieve improved polyp detection on SNBI images generated from WLI compared to the original WLI. This is because our WLI-to-SNBI translation model can enhance the observation of polyp surface patterns in the generated SNBI images.

eess.IV↗

arXiv2023

A Multi-channel EEG Data Analysis for Poor Neuro-prognostication in Comatose Patients with Self and Cross-channel Attention Mechanism

This work investigates the predictive potential of bipolar electroencephalogram (EEG) recordings towards efficient prediction of poor neurological outcomes. A retrospective design using a hybrid deep learning approach is utilized to optimize an objective function aiming for high specificity, i.e., true positive rate (TPR) with reduced false positives (< 0.05). A multi-channel EEG array of 18 bipolar channel pairs from a randomly selected 5-minute segment in an hour is kept. In order to determine the outcome prediction, a combination of a feature encoder with 1-D convolutional layers, learnable position encoding, a context network with attention mechanisms, and finally, a regressor and classifier blocks are used. The feature encoder extricates local temporal and spatial features, while the following position encoding and attention mechanisms attempt to capture global temporal dependencies. Results: The proposed framework by our team, OUS IVS, when validated on the challenge hidden validation data, exhibited a score of 0.57.

eess.SP↗

arXiv2023

Multimodal Deep Learning for Personalized Renal Cell Carcinoma Prognosis: Integrating CT Imaging and Clinical Data

Renal cell carcinoma represents a significant global health challenge with a low survival rate. This research aimed to devise a comprehensive deep-learning model capable of predicting survival probabilities in patients with renal cell carcinoma by integrating CT imaging and clinical data and addressing the limitations observed in prior studies. The aim is to facilitate the identification of patients requiring urgent treatment. The proposed framework comprises three modules: a 3D image feature extractor, clinical variable selection, and survival prediction. The feature extractor module, based on the 3D CNN architecture, predicts the ISUP grade of renal cell carcinoma tumors linked to mortality rates from CT images. A selection of clinical variables is systematically chosen using the Spearman score and random forest importance score as criteria. A deep learning-based network, trained with discrete LogisticHazard-based loss, performs the survival prediction. Nine distinct experiments are performed, with varying numbers of clinical variables determined by different thresholds of the Spearman and importance scores. Our findings demonstrate that the proposed strategy surpasses the current literature on renal cancer prognosis based on CT scans and clinical factors. The best-performing experiment yielded a concordance index of 0.84 and an area under the curve value of 0.8 on the test cohort, which suggests strong predictive power. The multimodal deep-learning approach developed in this study shows promising results in estimating survival probabilities for renal cell carcinoma patients using CT imaging and clinical data. This may have potential implications in identifying patients who require urgent treatment, potentially improving patient outcomes. The code created for this project is available for the public on: \href{https://github.com/Balasingham-AI-Group/Survival_CTplusClinical}{GitHub}

cs.CV↗

arXiv2023

Accurate Real-time Polyp Detection in Videos from Concatenation of Latent Features Extracted from Consecutive Frames

An efficient deep learning model that can be implemented in real-time for polyp detection is crucial to reducing polyp miss-rate during screening procedures. Convolutional neural networks (CNNs) are vulnerable to small changes in the input image. A CNN-based model may miss the same polyp appearing in a series of consecutive frames and produce unsubtle detection output due to changes in camera pose, lighting condition, light reflection, etc. In this study, we attempt to tackle this problem by integrating temporal information among neighboring frames. We propose an efficient feature concatenation method for a CNN-based encoder-decoder model without adding complexity to the model. The proposed method incorporates extracted feature maps of previous frames to detect polyps in the current frame. The experimental results demonstrate that the proposed method of feature concatenation improves the overall performance of automatic polyp detection in videos. The following results are obtained on a public video dataset: sensitivity 90.94\%, precision 90.53\%, and specificity 92.46%

cs.CV↗

arXiv2023

Non-invasive Waveform Analysis for Emergency Triage via Simulated Hemorrhage: An Experimental Study using Novel Dynamic Lower Body Negative Pressure Model

The extent to which advanced waveform analysis of non-invasive physiological signals can diagnose levels of hypovolemia remains insufficiently explored. The present study explores the discriminative ability of a deep learning (DL) framework to classify levels of ongoing hypovolemia, simulated via novel dynamic lower body negative pressure (LBNP) model among healthy volunteers. We used a dynamic LBNP protocol as opposed to the traditional model, where LBNP is applied in a predictable step-wise, progressively descending manner. This dynamic LBNP version assists in circumventing the problem posed in terms of time dependency, as in real-life pre-hospital settings, intravascular blood volume may fluctuate due to volume resuscitation. A supervised DL-based framework for ternary classification was realized by segmenting the underlying noninvasive signal and labeling segments with corresponding LBNP target levels. The proposed DL model with two inputs was trained with respective time-frequency representations extracted on waveform segments to classify each of them into blood volume loss: Class 1 (mild); Class 2 (moderate); or Class 3 (severe). At the outset, the latent space derived at the end of the DL model via late fusion among both inputs assists in enhanced classification performance. When evaluated in a 3-fold cross-validation setup with stratified subjects, the experimental findings demonstrated PPG to be a potential surrogate for variations in blood volume with average classification performance, AUROC: 0.8861, AUPRC: 0.8141, $F1$-score:72.16%, Sensitivity:79.06 %, and Specificity:89.21 %. Our proposed DL algorithm on PPG signal demonstrates the possibility of capturing the complex interplay in physiological responses related to both bleeding and fluid resuscitation using this challenging LBNP setup.

eess.SP↗

arXiv2023

Simple U-net Based Synthetic Polyp Image Generation: Polyp to Negative and Negative to Polyp

Synthetic polyp generation is a good alternative to overcome the privacy problem of medical data and the lack of various polyp samples. In this study, we propose a deep learning-based polyp image generation framework that generates synthetic polyp images that are similar to real ones. We suggest a framework that converts a given polyp image into a negative image (image without a polyp) using a simple conditional GAN architecture and then converts the negative image into a new-looking polyp image using the same network. In addition, by using the controllable polyp masks, polyps with various characteristics can be generated from one input condition. The generated polyp images can be used directly as training images for polyp detection and segmentation without additional labeling. To quantitatively assess the quality of generated synthetic polyps, we use public polyp image and video datasets combined with the generated synthetic images to examine the performance improvement of several detection and segmentation models. Experimental results show that we obtain performance gains when the generated polyp images are added to the training set.

eess.IV↗

arXiv2022

The End-to-End Molecular Communication Model of Extracellular Vesicle-based Drug Delivery

A closer look at nature has recently brought more interest in exploring and utilizing intra-body communication networks composed of cells as intrinsic, perfectly biocompatible infrastructures to deliver therapeutics. Naturally occurring cell-to-cell communication systems are being manipulated to release, navigate, and take up soluble cell-derived messengers that are either therapeutic by nature or carry therapeutic molecular cargo in their structures. One example of such structures is extracellular vesicles (EVs) which have been recently proven to have favorable pharmacokinetic properties, opening new avenues for developing the next generation biotherapeutics. In this paper, we study theoretical aspects of the EV transfer within heart tissue as a case study by utilizing an information and communication technology-like approach in analyzing molecular communication systems. Our modeling implies the abstraction of the EV releasing cells as transmitters, the extracellular matrix as the channel, and the EV receiving cells as receivers. Our results, derived from the developed analytical models, indicate that the release can be modulated using external forces such as electrical signals, and the transfer and reception can be affected by the extracellular matrix and plasma membrane properties, respectively. The results can predict the EV biodistributions and contribute to avoiding unplanned administration, often resulting in side- and adverse effects.

eess.SP↗

arXiv2020

Molecular Communications in Viral Infections Research: Modelling, Experimental Data and Future Directions

Hundreds of millions of people worldwide are affected by viral infections each year, and yet, several of them neither have vaccines nor effective treatment during and post-infection. This challenge has been highlighted by the COVID-19 pandemic, showing how viruses can quickly spread and how they can impact society as a whole. Novel techniques that bring in different disciplines must emerge to provide forward-looking strategies to combat viral infections, as well as possible future pandemics. In the past decade, an interdisciplinary area involving bioengineering, nanotechnology and information and communication technology (ICT) has been developing, known as Molecular Communications. This new emerging area uses elements of classical communication systems and maps it to molecular signalling and communication found inside and outside the body, where the aim is to develop new tools that can serve future medicine. In this paper, we provide an extensive and detailed discussion on how Molecular Communications can be integrated into the research on viral infectious diseases modelling, and how possible treatment and vaccines can be developed considering molecules as information carriers. We provide a literature review on the existing models of Molecular Communications for viral infection (in-body and out-body), a deep analysis on their effects on the host and subsequent communication process for other systems within the body (e.g., immune response), sources of experimental data on known viral infections and how it can be used by the Molecular Communications community, as well as open issues and future directions. Since the development of therapeutics/vaccines needs an interdisciplinary approach centred around ICT, we are confident that Molecular Communications can play a central role here by providing a detail characterisation and manipulation of the propagation of molecules in different media.

q-bio.OT↗