arXiv subjects

Ilka Kriegel

Publications and source records attributed to Ilka Kriegel.

30 records · Page 2Linked to original sources

arXiv2018

One-dimensional disordered photonic structures with two or more materials

Here we would like to discuss the light transmission modulation by periodic and disordered one dimensional (1D) photonic structures. In particular, we will present some theoretical and experimental findings highlighting the peculiar optical properties of: i) 1D periodic and disordered photonic structures made with two or more materials; ii) 1D photonic structures in which the homogeneity or the aggregation of the high refractive index layers is controlled. We will focus also on the fabrication aspects of these structures.

physics.optics↗

arXiv2017

Electro-optic and magneto-optic photonic devices based on multilayers photonic structures

In this work we describe different types of photonic structures that allow tunability of the photonic band gap upon the application of external stimuli, as the electric or magnetic field. We review and compare two porous 1D photonic crystals: in the first one a liquid crystal has been infiltrated in the pores of the nanoparticle network, while in the second one the optical response to the electric field of metallic nanoparticles has been exploited. Then, we present a 1D photonic crystal made with indium tin oxide (ITO) nanoparticles, and we propose this system for electro-optic tuning. Finally, we describe a microcavity with a defect mode that is tuned in the near infrared by the magnetic field, envisaging a contact-less magneto-optic switch. These optical switches can find applications in ICT and electrochromic windows.

physics.optics↗

arXiv2017

Covalent Functionalized Black Phosphorus Quantum Dots

Black phosphorus (BP) nanostructures enable a new strategy to tune the electronic and optical properties of this atomically thin material. In this paper we show, via density functional theory calculations, the possibility to modify the optical properties of BP quantum dots via covalent functionalization. The quantum dot selected in this study has chemical formula P24H12 and has been covalent functionalized with one or more benzene rings or anthracene. The effect of functionalization is highlighted in the absorption spectra, where a red shift of the absorption is noticeable. The shift can be ascribed to an electron delocalization in the black phosphorus/organic molecule nanostructure.

cond-mat.mtrl-sci↗

arXiv2017

Light-induced switching in pDTE - FICO 1D photonic structures

We propose the design of 1D photonic crystals and microcavities in which fluorine-indium codoped cadmium oxide (FICO) nanocrystal based layers and layers of diarylethene-based polyester (pDTE) are alternated or embedded in a microcavity. The irradiation with UV light results in two different behaviours: i) it dopes the FICO nanocrystals inducing a blue shift of their plasmonic resonances; ii) it changes the real part of the refractive index of the photochromic pDTE polymer. These two behaviours are combined in the proposed photonic structures and can be useful for switchable filters and cavities for light emission.

physics.optics↗

arXiv2017

Optical properties of periodic, quasi-periodic, and disordered one-dimensional photonic structures

Photonic crystals are characterized by a spatial modulation of the dielectric constant on the length scale of the wavelength of light giving rise to energy ranges where light cannot propagate through the crystal - the photonic band gap. While mostly photonic crystals are referred to as periodic arrangements, in this review we aim to highlight as well how aperiodicity and disorder affects light modulation. In this review article, we introduce the concepts of periodicity, quasi-periodicity, and disorder in photonic crystals, focussing on the one-dimensional case. We discuss in detail the physical peculiarities, the fabrication techniques, and the applications of periodic, quasi-periodic, and disorder photonic structures, highlighting how the degree of crystallinity matters in the manipulation of light. We report different types of disorder in 1D photonic structures and we discuss their properties in terms of light transmission. We discuss the relationship between the average total transmission, in a range of wavelengths around the photonic band gap of the corresponding photonic crystal, and the homogeneity of the photonic structures, quantified by the Shannon index. Then we discuss the light transmission in structures in which the high refractive index layers are aggregated in clusters following a power law distribution. Finally, in the case of structures in which the high refractive index layers are aggregated in clusters with a truncated uniform distribution, we discuss: i) how different refractive index contrast tailors the total light transmission; ii) how the total light transmission is affected by the introduction of defects made with a third material.

physics.optics↗

arXiv2017

Magneto-optical switching in microcavities based on a TGG defect sandwiched between periodic and disordered one-dimensional photonic structures

The employment of magneto-optical materials to fabricate photonic crystals gives the unique opportunity to achieve optical tuning by applying a magnetic field. In this study we have simulated the transmission spectrum of a microcavity in which the Bragg reflectors are made with silica (SiO2) and yttria (Y2O3) and the defect layer is made with TGG (Tb3Ga5O12). We show that the application of an external magnetic field results in a tuning of the defect mode of the microcavity. In the simulations we have considered the wavelength dependence of the refractive indexes and the Verdet constants of the materials. A tuning of the defect mode of about 22 nm with a magnetic field of 5 T, at low temperature (8 K), is demonstrated. Furthermore, we discuss the possibility to tune a microcavity with disordered photonic structures as reflectors. In the presence of the magnetic field such microcavity shows a shift of resonances in a broad range of wavelengths. This study presents a method of contactless optical tuning.

physics.optics↗

arXiv2017

Plasmonic Doped Semiconductor Nanocrystals: Properties, Fabrication, Applications and Perspectives

Degenerately doped semiconductor nanocrystals (NCs) are of recent interest to the NC community due to their tunable localized surface plasmon resonances (LSPRs) in the near infrared (NIR). The high level of doping in such materials with carrier densities in the range of 1021 cm^-3 leads to degeneracy of the doping levels and intense plasmonic absorption in the NIR. The lower carrier density in degenerately doped semiconductor NCs compared to noble metals enables LSPR tuning over a wide spectral range, since even a minor change of the carrier density strongly affects the spectral position of the LSPR. We focus on copper chalcogenide NCs and impurity doped metal oxide NCs as the most investigated alternatives to noble metals. We shed light on the structural changes upon LSPR tuning in vacancy doped copper chalcogenide NCs and deliver a picture for the fundamentally different mechanism of LSPR modification of impurity doped metal oxide NCs. We review on the peculiar optical properties of plasmonic degenerately doped NCs by highlighting the variety of different optical measurements and optical modeling approaches. These findings are merged in an exhaustive section on new and exciting applications based on the special characteristics that plasmonic semiconductor NCs bring along.

cond-mat.mtrl-sci↗

arXiv2016

A probabilistic model of the electron transport in films of PbSe nanocrystals arranged in a cubic lattice

The fabrication of nanocrystal (NC) films, starting from colloidal dispersion, is a very attractive topic in condensed matter physics community. NC films can be employed for transistors, light emitting diodes, laser, and solar cells. For this reason the understanding of the film conductivity is of major importance. In this paper we describe a probabilistic model that allow to predict the conductivity of the NC films, in this case of a cubic lattice of Lead Selenide NCs. The model is based on the hopping probability between NCs show a comparison with experimental data reported in literature.

cond-mat.mtrl-sci↗

arXiv2015

Molecular-Level Switching of Polymer/Nanocrystal Non-Covalent Interactions and Application in Hybrid Solar Cells

Hy brid composites obtained upon blending conjugated polymers and colloidal inorganic semiconductor nanocrystals are regarded as attractive photo-active materials for optoelectronic applications. Here we demonstrate that tailoring nanocrystal surface chemistry permits to exert control on non-covalent bonding and electronic interactions between organic and inorganic components. The pendant moieties of organic ligands at the nanocrystal surface do not merely confer colloidal stability while hindering charge separation and transport, but drastically impact morphology of hybrid composites during formation from blend solutions. The relevance of our approach to photovoltaic applications is demonstrated for composites based on poly(3-hexylthiophene) and Pbs nanocrystals, considered as inadequate before the submission of this manuscript, which enable the fabrication of hybrid solar cells displaying a power conversion efficiency that reaches 3 %. Upon (quasi)steady-state and time-resolved analisys of the photo-induced processes in the nanocomposites and their organic and inorganic components, we ascertained that electron transfer occurs at the hybrid interface yielding long-lived separated charge carriers, whereas interfacial hole transfer appears slow. Here we provide a reliable alternative aiming at gaining control over macroscopic optoelectronic properties of polymer/nanocrystal composites by acting at the molecular-level via ligands' pendant moieties, thus opening new possibilities towards efficient solution-processed hybrid solar cells.

cond-mat.mtrl-sci↗

arXiv2015

Periodic transmission peaks in non-periodic disordered one-dimensional photonic structures

A better understanding of the optical properties of a device structure characterized by a random arrangement of materials with different dielectric properties at a length scale comparable to the wavelength of light is crucial for the realization of new optical and optoelectronic devices. Here we have studied the light transmission of disordered photonic structures made with two and three different materials, characterized by the same optical thickness. In their transmission spectra a formation of peaks, with a transmission of up to 75%, is evident. The spectral position of such peaks is very regular, which is a result of the constraint that all layers have the same optical thickness. This gives rise to a manifold of applications such as new types of bandpass filters and resonators for distributed feedback lasers.

physics.optics↗

arXiv2014

Tunable Light Filtering in a Bragg Mirror/Heavily-Doped Semiconducting Nanocrystal Composite

Tunable light filters are critical components for many optical applications in which light in-coupling, out-coupling or rejection is crucial, such as lasing, sensing, photovoltaics and information and communication technology. For this purpose, Bragg mirrors, band-pass filters with high reflectivity represent good candidates. However, their optical characteristics are determined at the stage of fabrication. Heavily doped semiconductor nanocrystals (NCs) on the other hand deliver a high degree of optical tunability through the active modulation of their carrier density ultimately influencing their plasmonic absorption properties. Here, we propose the design of a tunable light filter composed of a Bragg mirror and a layer of plasmonic semiconductor NCs. We demonstrate that the filtering properties of the coupled device can be tuned to cover a wide range of frequencies from the visible to the near infrared (vis-NIR) spectral region when employing varying carrier densities. As tunable component we implemented a dispersion of copper selenide (Cu2-xSe) NCs and a film of indium tin oxide (ITO) NCs, which are known to show optical tunablility by chemical or electrochemical treatments. We utilized the Mie theory to describe the carrier dependent plasmonic properties of the Cu2-xSe NC dispersion and the effective medium theory to describe the optical characteristics of the ITO film. The transmission properties of the Bragg mirror have been modelled with the transfer matrix method. We foresee ease of experimental realization of the coupled device, where filtering modulation is achieved upon chemical and electrochemical post-fabrication treatment of the heavily doped semiconductor NC component, eventually resulting in tunable transmission properties of the coupled device.

physics.optics↗

arXiv2014

Disordered one-dimensional photonic structures composed by more than two materials with the same optical thickness

The optical properties of photonic structures made with more than two materials are very interesting for optical filtering and lighting applications. Herein, we compared the transmission properties of one-dimensional photonic crystals made with three, four and five materials, showing that, with a photonic crystal made of t different materials, the band gap splits in t-1 bands. The same optical thickness for the different materials layers results in split photonic band gaps with the same intensity. Photonic crystals with more than two materials result in a simple structure that could be used for multi-feature optical filters, or that could provide feedback for multi-emission distributed feedback lasers. Furthermore, we analyzed the transmission properties of ternary and quaternary random photonic structures. These materials could very interesting for light trapping in photovoltaic devices.

physics.optics↗