arXiv subjects

Ilya Golokolenov

Publications and source records attributed to Ilya Golokolenov.

11 recordsLinked to original sources

arXiv2026

Performance optimization of cascaded traveling wave Josephson parametric amplifiers

Traveling-wave parametric amplifiers (TWPAs) based on Josephson metamaterials provide broadband gain with near-quantum-limited added noise. Whereas long nonlinear metamaterial devices can deliver high gain, short arrays suffer less from dissipation, pump depletion, and internal standing waves which can degrade noise performance. Here, we demonstrate a cascaded TWPA architecture that combines the advantages of both approaches by employing a short (736-element), low-dissipation Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL)-based TWPA as the first amplification stage, followed by a conventional long (1632-element) TWPA that provides additional gain. The resulting amplifier cascade achieves nearly 30 dB of total gain over a tunable bandwidth of approximately 1 GHz while maintaining added noise close to the quantum limit. Our results establish a cascade of TWPAs as a practical approach for high-gain, broadband, quantum amplification with applications in quantum information processing, multi-mode entanglement, and quantum sensing applications at microwave frequencies.

quant-ph↗

arXiv2026

Quantifying Strain and its Effect on Charge Transport in Ge/Si Core/Shell Nanowires

Strain engineering in semiconductor nanostructures offers a promising route to optimize electronic and optical properties for advanced quantum technologies. This study explores the relationship between core and shell thicknesses and strain distribution in Ge/Si core/shell nanowires, targeting their application as hosts for spin qubits. Nanowires were synthesized using an Au-catalyzed chemical vapor deposition technique, achieving control over core and shell dimensions. High-resolution transmission electron microscopy and elemental mapping confirmed structural integrity, while Geometric Phase Analysis and Raman spectroscopy provided quantitative insights into strain variations driven by core and shell dimensions. Furthermore, polarization resolved $μ$-Raman measurements allowed us to quantify the longitudinal and transverse phonon mode splitting as a function of strain in the Ge core. The strain dependent electronic properties were investigated by hole mobility measurements. Finally, we observe a record high hole mobility of 25,500 cm$^2$V$^{-1}$s$^{-1}$, underscoring the potential of these core/shell nanowire structures for the realization of high-fidelity spin qubits. Our findings highlight the critical role of geometry in strain tuning and provide valuable design guidelines for optimizing Ge/Si nanowires in scalable quantum device architectures.

cond-mat.mes-hall↗

arXiv2025

Quantitative calibration of a TWPA applied to an optomechanical platform

In the last decade, the microwave quantum electronics toolbox has been enriched with quantum-limited detection devices such as Traveling Wave Parametric Amplifiers (TWPAs). The extreme sensitivity they provide is not only mandatory for some physics applications within quantum information processing, but is also the key element that will determine the detection limit of quantum sensing setups. In the framework of microwave optomechanical systems, an unprecedented range of small motions and forces is accessible, for which a specific quantitative calibration becomes necessary. We report on near quantum-limited measurements performed with an aluminum drumhead mechanical device within the temperature range 4 mK - 400 mK. The whole setup is carefully calibrated, especially taking into account the power-dependence of microwave absorption in the superconducting optomechanical cavity. This effect is commonly attributed to Two-Level-Systems (TLSs) present in the metal oxide. We demonstrate that a similar feature exists in the TWPA, and can be phenomenologically fit with adapted expressions. If not taken into account, the error on the signal strength can be as large as a factor of about 2, which is unacceptable for quantitative experiments. The power and temperature dependence is studied over the full parameter range, leading to an absolute definition of phonon population (i.e. Brownian motion amplitude), with an uncertainty +- 20 % limited by sources of noise internal to the optomechanical element.

quant-ph↗

arXiv2025

Aluminum goalpost nano-mechanical devices at low temperatures

Mechanical objects have been widely used at low temperatures for decades, for various applications; from quantum fluids sensing with vibrating wires or tuning forks, to torsional oscillators for the study of mechanical properties of glasses, and finally micro and nano-mechanical objects with the advent of clean room technologies. These small structures opened up new possibilities to experimentalists, thanks to their small size. We report on the characterization of purely metallic goalpost nano-mechanical structures, which are employed today for both quantum fluids studies (especially quantum turbulence in $^4$He, $^3$He) and intrinsic friction studies (Two-Level-Systems unraveling). Extending existing literature, we demonstrate the analytic modeling of the resonances, in good agreement with numerical simulations, for both first and second mechanical modes. Especially, the impact of the curvature of the whole structure (and therefore, in-built surface stress) is analyzed, together with nonlinear properties. We demonstrate that these are of geometrical origin, and device-dependent. Motion and forces are expressed in meters and Newtons experienced at the level of the goalpost's paddle, for any magnitude or curvature, which is of particular importance for quantum fluids and solids studies.

physics.app-ph↗

arXiv2024

Progress toward detection of individual TLS in nanomechanical resonators

The low temperature properties of amorphous solids are usually explained in terms of atomic-scale tunneling two level systems (TLS). For almost 20 years, individual TLS have been probed in insulating layers of superconducting quantum circuits. Detecting individual TLS in mechanical systems has been proposed but not definitively demonstrated. We describe an optomechanical system that is appropriate for this goal and describe our progress toward achieving it. In particular, we show that the expected coupling between the mechanical mode and a resonant TLS is strong enough for high visibility of a TLS given the linewidth of the mechanical mode. Furthermore, the electronic noise level of our measurement system is low enough and the anomalous force noise observed in other nanomechanical devices is absent.

cond-mat.mes-hall↗

arXiv2023

On the link between mechanics and thermal properties: mechanothermics

We report on the theoretical derivation of macroscopic thermal properties (specific heat, thermal conductivity) of an electrically insulating rod connected to two reservoirs, from the linear superposition of its mechanical mode Brownian motions. The calculation is performed for a weak thermal gradient, in the classical limit (high temperature). The development is kept basic as far as geometry and experimental conditions are concerned, enabling an almost fully analytic treatment. In the modeling, each of the modes is subject to a specific Langevin force, which enables to produce the required temperature profile along the rod. The theory is predictive: the temperature gradient (and therefore energy transport) is linked to motion amplitude cross-correlations between nearby mechanical modes. This arises because energy transport is actually mediated by mixing between the modal waves, and not by the modes themselves. This result can be tested on experiments, and shall extend the concepts underlying equipartition and fluctuation-dissipation theorems. The theory links intimately the macroscopic size of the clamping region where the mixing occurs to the microscopic lengthscale of the problem at hand: the phonon mean-free-path. This clamping region, which is key, has received recently a renewed attention in the field of nanomechanics with topical works on "phonon shields" and "soft clamping". We believe that our work should impact the domain of thermal transport in nanostructures, with future developments of the theory toward the quantum regime.

cond-mat.mes-hall↗

arXiv2023

Nano-beam clamping revisited

Within recent years, the field of nano-mechanics has diversified in a variety of applications, ranging from quantum information processing to biological molecules recognition. Among the diversity of devices produced these days, the simplest (but versatile) element remains the doubly-clamped beam: it can store very large tensile stresses (producing high resonance frequencies $f_0$ and quality factors $Q$), is interfaceable with electric setups (by means of conductive layers), and can be produced easily in clean rooms (with scalable designs including multiplexing). Besides, its mechanical properties are the simplest to describe. Resonance frequencies and $Q$s are being modeled, with as specific achievement the ultra-high quality resonances based on ``soft clamping'' and ``phonon shields''. Here, we demonstrate that the fabrication undercut of the clamping regions of basic nano-beams produces a ``natural soft clamping'', given for free. We present the analytic theory that enables to fit experimental data, which can be used for $\{ Q , f_0 \}$ design: beyond Finite Element Modeling validation, the presented expressions provide a profound understanding of the phenomenon, with both a Q enhancement and a downwards frequency shift.

cond-mat.mes-hall↗

arXiv2023

Thermodynamics of a Single Mesoscopic Phononic Mode

In recent decades, the laws of thermodynamics have been pushed down to smaller and smaller scales, within the field of stochastic thermodynamics and state-of-art experiments performed on mesoscopic systems. These measurements concern electrons, photons, and mesoscopic mechanical objects. Here we report on the measurements of thermal fluctuations of a single mechanical mode in-equilibrium with a heat reservoir. The device under study is a nanomechanical beam with a first flexure resonating at 3.8MHz, cooled down to temperatures in the range from 100mK to 400mK. The technique is constructed around a microwave opto-mechanical setup using a cryogenic High Electron Mobility Transistor, and is based on two parametric amplifications implemented in series: an in-built opto-mechanical 'blue-detuned' pumping plus a Traveling Wave Parametric Amplifier stage. We demonstrate our ability to resolve energy fluctuations of the mechanical mode in real-time up to the fastest relevant speed given by the mechanical relaxation rate. The energy probability distribution is then exponential, matching the expected Boltzmann distribution. The variance of fluctuations is found to be $(k_B T)^2$ with no free parameters. Our microwave detection floor is about 3 Standard Quantum Limit at 6GHz; the resolution of our fastest acquisition tracks reached about 100 phonons, and is related to the rather poor opto-mechanical coupling of the device ($g_0/2π\approx 0.5~$Hz). This result is deeply in the classical regime, but shall be extended to the quantum case in the future with systems presenting a much larger $g_0$ (up to $2π\times 250~$Hz), potentially reaching the resolution of a single mechanical quantum. We believe that it will open a new experimental field: phonon-based quantum stochastic thermodynamics, with fundamental implications for quantum heat transport and macroscopic mechanical quantum coherence.

cond-mat.mes-hall↗

arXiv2022

Superconducting aluminum heat switch with 3 n$Ω$ equivalent resistance

Superconducting heat switches with extremely low normal state resistances are needed for constructing continuous nuclear demagnetization refrigerators with high cooling power. Aluminum is a suitable superconductor for the heat switch because of its high Debye temperature and its commercial availability in high purity. We have constructed a high quality Al heat switch whose design is significantly different than that of previous heat switches. In order to join the Al to Cu with low contact resistance, we plasma etched the Al to remove its oxide layer then immediately deposited Au without breaking the vacuum of the e-beam evaporator. In the normal state of the heat switch, we measured a thermal conductance of $8 T$ W/K$^2$ which is equivalent to an electrical resistance of 3 n$Ω$ according to the Wiedemann-Franz law. In the superconducting state we measured a thermal conductance that is $2\times10^6$ times lower than that of the normal state at 50 mK.

physics.ins-det↗

arXiv2022

Fully suspended nano-beams for quantum fluids

Non-invasive probes are keystones of fundamental research. Their size, and maneuverability (in terms of e.g. speed, dissipated power) define their applicability range for a specific use. As such, solid state physics possesses e.g. Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM), or Scanning SQUID Microscopy. In comparison, quantum fluids (superfluid $^3$He, $^4$He) are still lacking probes able to sense them (in a fully controllable manner) down to their smallest relevant lengthscales, namely the coherence length $ξ_0$. In this work we report on the fabrication and cryogenic characterization of fully suspended (hanging over an open window, with no substrate underneath) Si$_3$N$_4$ nano-beams, of width down to 50 nm and quality factor up to $10^5$. As a benchmark experiment we used them to investigate the Knudsen boundary layer of a rarefied gas: $^4$He at very low pressures. The absence of the rarefaction effect due to the nearby chip surface discussed in Gazizulin et al. [1] is attested, while we report on the effect of the probe size itself.

cond-mat.mes-hall↗

arXiv2021

Microwave single-tone optomechanics in the classical regime

We report on the quantitative experimental illustration of elementary optomechanics within the classical regime. All measurements are performed in a commercial dilution refrigerator on a mesoscopic drumhead aluminium resonator strongly coupled to a microwave cavity, using only strict single-tone schemes. Sideband asymmetry is reported using in-cavity microwave pumping, along with noise squashing and back-action effects. Results presented in this paper are analysed within the simple classical electric circuit theory, emphasizing the analogous nature of classical features with respect to their usual quantum description. The agreement with theory is obtained with no fitting parameters. Besides, based on those results a simple method is proposed for the accurate measurement of the ratio between microwave internal losses and external coupling.

cond-mat.mes-hall↗