Searcharxiv⌕ Search

arXiv subjects

J. B. Bell

Publications and source records attributed to J. B. Bell.

At least 37 records · Page 2Linked to original sources

Low Mach Number Modeling of Convection in Helium Shells on Sub-Chandrasekhar White Dwarfs. I. Methodology

We assess the robustness of a low Mach number hydrodynamics algorithm for modeling helium shell convection on the surface of a white dwarf in the context of the sub-Chandrasekhar model for Type Ia supernovae. We use the low Mach number stellar hydrodynamics code, MAESTRO, to perform three-dimensional, spatially-adaptive simulations of convection leading up to the point of the ignition of a burning front. We show that the low Mach number hydrodynamics model provides a robust description of the system.

astro-ph.SR↗

High-Resolution Simulations of Convection Preceding Ignition in Type Ia Supernovae Using Adaptive Mesh Refinement

We extend our previous three-dimensional, full-star simulations of the final hours of convection preceding ignition in Type Ia supernovae to higher resolution using the adaptive mesh refinement capability of our low Mach number code, MAESTRO. We report the statistics of the ignition of the first flame at an effective 4.34 km resolution, and general flow field properties at an effective 2.17 km resolution. We find that off-center ignition is likely, with radius of 50 km most favored and a likely range of 40 to 75 km. This is consistent with our previous coarser (8.68 km resolution) simulations, implying that we have achieved sufficient resolution in our determination of likely ignition radii. The dynamics of the last few hot spots preceding ignition suggest that a multiple ignition scenario is not likely. With improved resolution, we can more clearly see the general flow pattern in the convective region, characterized by a strong outward plume with a lower speed recirculation. We show that the convective core is turbulent with a Kolmogorov spectrum and has a lower turbulent intensity and larger integral length scale than previously thought (on the order of 16 km s$^{-1}$ and 200 km, respectively), and we discuss the potential consequences for the first flames.

astro-ph.HE↗

From Convection to Explosion: End-to-End Simulation of Type Ia Supernovae

We present our end-to-end capability for computing the convective phase through the explosion phase of Type Ia supernovae. We compute the convective phase up to the time of ignition using our low Mach number code, MAESTRO, and the subsequent explosion phase using our compressible code, CASTRO. Both codes share the same BoxLib software framework and use finite-volume, block-structured adaptive mesh refinement (AMR) to enable high-resolution, three-dimensional full-star simulations that scale to 100,000+ cores. We present preliminary results from the first-ever simulations of convection preceding ignition using MAESTRO with AMR. We also demonstrate our ability to initialize a compressible simulation of the explosion phase in CASTRO using data obtained directly from MAESTRO just before ignition. Some care must be taken during this initialization procedure when interpreting the size and distribution of hot spots.

astro-ph.HE↗

Enhancement of Diffusive Transport by Nonequilibrium Thermal Fluctuations

We study the contribution of advection by thermal velocity fluctuations to the effective diffusion coefficient in a mixture of two identical fluids. The steady-state diffusive flux in a finite system subject to a concentration gradient is enhanced because of long-range correlations between concentration fluctuations and fluctuations of the velocity parallel to the concentration gradient. The enhancement of the diffusive transport depends on the system size L and grows as \ln(L/L_{0}) in quasi-two dimensional systems, while in three dimensions it grows as L_{0}^{-1}-L^{-1}, where L_{0} is a reference length. The predictions of a simple fluctuating hydrodynamics theory, closely related to second-order mode-mode coupling analysis, are compared to results from particle simulations and a finite-volume solver and excellent agreement is observed. We elucidate the direct connection to the long-time tail of the velocity autocorrelation function in finite systems, as well as finite-size corrections employed in molecular dynamics calculations. Our results conclusively demonstrate that the nonlinear advective terms need to be retained in the equations of fluctuating hydrodynamics when modeling transport in small-scale finite systems.

cond-mat.mes-hall↗

Diffusive Transport Enhanced by Thermal Velocity Fluctuations

We study the contribution of advection by thermal velocity fluctuations to the effective diffusion coefficient in a mixture of two indistinguishable fluids. The enhancement of the diffusive transport depends on the system size L and grows as \ln(L/L_0) in quasi two-dimensional systems, while in three dimensions it scales as L_0^{-1}-L^{-1}, where L_0 is a reference length. The predictions of a simple fluctuating hydrodynamics theory are compared to results from particle simulations and a finite-volume solver and excellent agreement is observed. Our results conclusively demonstrate that the nonlinear advective terms need to be retained in the equations of fluctuating hydrodynamics when modeling transport in small-scale finite systems.

cond-mat.mes-hall↗

Multidimensional Modeling of Type I X-ray Bursts. I. Two-Dimensional Convection Prior to the Outburst of a Pure Helium Accretor

We present multidimensional simulations of the early convective phase preceding ignition in a Type I X-ray burst using the low Mach number hydrodynamics code, MAESTRO. A low Mach number approach is necessary in order to perform long-time integration required to study such phenomena. Using MAESTRO, we are able to capture the expansion of the atmosphere due to large-scale heating while capturing local compressibility effects such as those due to reactions and thermal diffusion. We also discuss the preparation of one-dimensional initial models and the subsequent mapping into our multidimensional framework. Our method of initial model generation differs from that used in previous multidimensional studies, which evolved a system through multiple bursts in one dimension before mapping onto a multidimensional grid. In our multidimensional simulations, we find that the resolution necessary to properly resolve the burning layer is an order of magnitude greater than that used in the earlier studies mentioned above. We characterize the convective patterns that form and discuss their resulting influence on the state of the convective region, which is important in modeling the outburst itself.

astro-ph.HE↗

CASTRO: A New Compressible Astrophysical Solver. I. Hydrodynamics and Self-Gravity

We present a new code, CASTRO, that solves the multicomponent compressible hydrodynamic equations for astrophysical flows including self-gravity, nuclear reactions and radiation. CASTRO uses an Eulerian grid and incorporates adaptive mesh refinement (AMR). Our approach to AMR uses a nested hierarchy of logically-rectangular grids with simultaneous refinement in both space and time. The radiation component of CASTRO will be described in detail in the next paper, Part II, of this series.

astro-ph.IM↗

MAESTRO: An Adaptive Low Mach Number Hydrodynamics Algorithm for Stellar Flows

Many astrophysical phenomena are highly subsonic, requiring specialized numerical methods suitable for long-time integration. In a series of earlier papers we described the development of MAESTRO, a low Mach number stellar hydrodynamics code that can be used to simulate long-time, low-speed flows that would be prohibitively expensive to model using traditional compressible codes. MAESTRO is based on an equation set derived using low Mach number asymptotics; this equation set does not explicitly track acoustic waves and thus allows a significant increase in the time step. MAESTRO is suitable for two- and three-dimensional local atmospheric flows as well as three-dimensional full-star flows. Here, we continue the development of MAESTRO by incorporating adaptive mesh refinement (AMR). The primary difference between MAESTRO and other structured grid AMR approaches for incompressible and low Mach number flows is the presence of the time-dependent base state, whose evolution is coupled to the evolution of the full solution. We also describe how to incorporate the expansion of the base state for full-star flows, which involves a novel mapping technique between the one-dimensional base state and the Cartesian grid, as well as a number of overall improvements to the algorithm. We examine the efficiency and accuracy of our adaptive code, and demonstrate that it is suitable for further study of our initial scientific application, the convective phase of Type Ia supernovae.

astro-ph.IM↗

On the Accuracy of Finite-Volume Schemes for Fluctuating Hydrodynamics

This paper describes the development and analysis of finite-volume methods for the Landau-Lifshitz Navier-Stokes (LLNS) equations and related stochastic partial differential equations in fluid dynamics. The LLNS equations incorporate thermal fluctuations into macroscopic hydrodynamics by the addition of white-noise fluxes whose magnitudes are set by a fluctuation-dissipation relation. Originally derived for equilibrium fluctuations, the LLNS equations have also been shown to be accurate for non-equilibrium systems. Previous studies of numerical methods for the LLNS equations focused primarily on measuring variances and correlations computed at equilibrium and for selected non-equilibrium flows. In this paper, we introduce a more systematic approach based on studying discrete equilibrium structure factors for a broad class of explicit linear finite-volume schemes. This new approach provides a better characterization of the accuracy of a spatio-temporal discretization as a function of wavenumber and frequency, allowing us to distinguish between behavior at long wavelengths, where accuracy is a prime concern, and short wavelengths, where stability concerns are of greater importance. We use this analysis to develop a specialized third-order Runge Kutta scheme that minimizes the temporal integration error in the discrete structure factor at long wavelengths for the one-dimensional linearized LLNS equations. Together with a novel method for discretizing the stochastic stress tensor in dimension larger than one, our improved temporal integrator yields a scheme for the three-dimensional equations that satisfies a discrete fluctuation-dissipation balance for small time steps and is also sufficiently accurate even for time steps close to the stability limit.

physics.flu-dyn↗

A hybrid particle-continuum method for hydrodynamics of complex fluids

A previously-developed hybrid particle-continuum method [J. B. Bell, A. Garcia and S. A. Williams, SIAM Multiscale Modeling and Simulation, 6:1256-1280, 2008] is generalized to dense fluids and two and three dimensional flows. The scheme couples an explicit fluctuating compressible Navier-Stokes solver with the Isotropic Direct Simulation Monte Carlo (DSMC) particle method [A. Donev and A. L. Garcia and B. J. Alder, ArXiv preprint 0908.0510]. To achieve bidirectional dynamic coupling between the particle (microscale) and continuum (macroscale) regions, the continuum solver provides state-based boundary conditions to the particle subdomain, while the particle solver provides flux-based boundary conditions for the continuum subdomain. The equilibrium diffusive (Brownian) motion of a large spherical bead suspended in a particle fluid is examined, demonstrating that the hybrid method correctly reproduces the velocity autocorrelation function of the bead but only if thermal fluctuations are included in the continuum solver. Finally, the hybrid is applied to the well-known adiabatic piston problem and it is found that the hybrid correctly reproduces the slow non-equilibrium relaxation of the piston toward thermodynamic equilibrium but, again, only the continuum solver includes stochastic (white-noise) flux terms. These examples clearly demonstrate the need to include fluctuations in continuum solvers employed in hybrid multiscale methods.

cond-mat.soft↗

Low Mach Number Modeling of Type Ia Supernovae. IV. White Dwarf Convection

We present the first three-dimensional, full-star simulations of convection in a white dwarf preceding a Type Ia supernova, specifically the last few hours before ignition. For these long-time calculations we use our low Mach number hydrodynamics code, MAESTRO, which we have further developed to treat spherical stars centered in a three-dimensional Cartesian geometry. The main change required is a procedure to map the one-dimensional radial base state to and from the Cartesian grid. Our models recover the dipole structure of the flow seen in previous calculations, but our long-time integration shows that the orientation of the dipole changes with time. Furthermore, we show the development of gravity waves in the outer, stable portion of the star. Finally, we evolve several calculations to the point of ignition and discuss the range of ignition radii.

astro-ph.HE↗

Turbulence-Flame Interactions in Type Ia Supernovae

The large range of time and length scales involved in type Ia supernovae (SN Ia) requires the use of flame models. As a prelude to exploring various options for flame models, we consider, in this paper, high-resolution three-dimensional simulations of the small-scale dynamics of nuclear flames in the supernova environment in which the details of the flame structure are fully resolved. The range of densities examined, 1 to $8 \times 10^7$ g cm$^{-3}$, spans the transition from the laminar flamelet regime to the distributed burning regime where small scale turbulence disrupts the flame. The use of a low Mach number algorithm facilitates the accurate resolution of the thermal structure of the flame and the inviscid turbulent kinetic energy cascade, while implicitly incorporating kinetic energy dissipation at the grid-scale cutoff. For an assumed background of isotropic Kolmogorov turbulence with an energy characteristic of SN Ia, we find a transition density between 1 and $3 \times 10^7$ g cm$^{-3}$ where the nature of the burning changes qualitatively. By $1 \times 10^7$ g cm$^{-3}$, energy diffusion by conduction and radiation is exceeded, on the flame scale, by turbulent advection. As a result, the effective Lewis Number approaches unity. That is, the flame resembles a laminar flame, but is turbulently broadened with an effective diffusion coefficient, $D_T \sim u' l$, where $u'$ is the turbulent intensity and $l$ is the integral scale. For the larger integral scales characteristic of a real supernova, the flame structure is predicted to become complex and unsteady. Implications for a possible transition to detonation are discussed.

astro-ph↗

New Approaches for Modeling Type Ia Supernovae

Type Ia supernovae (SNe Ia) are the largest thermonuclear explosions in the Universe. Their light output can be seen across great distances and has led to the discovery that the expansion rate of the Universe is accelerating. Despite the significance of SNe Ia, there are still a large number of uncertainties in current theoretical models. Computational modeling offers the promise to help answer the outstanding questions. However, even with today's supercomputers, such calculations are extremely challenging because of the wide range of length and time scales. In this paper, we discuss several new algorithms for simulations of SNe Ia and demonstrate some of their successes.

astro-ph↗

Low Mach Number Modeling of Type Ia Supernovae. II. Energy Evolution

The convective period leading up to a Type Ia supernova (SN Ia) explosion is characterized by very low Mach number flows, requiring hydrodynamical methods well-suited to long-time integration. We continue the development of the low Mach number equation set for stellar scale flows by incorporating the effects of heat release due to external sources. Low Mach number hydrodynamics equations with a time-dependent background state are derived, and a numerical method based on the approximate projection formalism is presented. We demonstrate through validation with a fully compressible hydrodynamics code that this low Mach number model accurately captures the expansion of the stellar atmosphere as well as the local dynamics due to external heat sources. This algorithm provides the basis for an efficient simulation tool for studying the ignition of SNe Ia.

astro-ph↗

Low Mach Number Modeling of Type Ia Supernovae

We introduce a low Mach number equation set for the large-scale numerical simulation of carbon-oxygen white dwarfs experiencing a thermonuclear deflagration. Since most of the interesting physics in a Type Ia supernova transpires at Mach numbers from 0.01 to 0.1, such an approach enables both a considerable increase in accuracy and savings in computer time compared with frequently used compressible codes. Our equation set is derived from the fully compressible equations using low Mach number asymptotics, but without any restriction on the size of perturbations in density or temperature. Comparisons with simulations that use the fully compressible equations validate the low Mach number model in regimes where both are applicable. Comparisons to simulations based on the more traditional anelastic approximation also demonstrate the agreement of these models in the regime for which the anelastic approximation is valid. For low Mach number flows with potentially finite amplitude variations in density and temperature, the low Mach number model overcomes the limitations of each of the more traditional models and can serve as the basis for an accurate and efficient simulation tool.

astro-ph↗

The Physics of Flames in Type Ia Supernovae

We extend a low Mach number hydrodynamics method developed for terrestrial combustion, to the study of thermonuclear flames in Type Ia supernovae. We discuss the differences between 2-D and 3-D Rayleigh-Taylor unstable flame simulations, and give detailed diagnostics on the turbulence, showing that the kinetic energy power spectrum obeys Bolgiano-Obukhov statistics in 2-D, but Kolmogorov statistics in 3-D. Preliminary results from 3-D reacting bubble calculations are shown, and their implications for ignition are discussed.

astro-ph↗

Three-dimensional Numerical Simulations of Rayleigh-Taylor Unstable Flames in Type Ia Supernovae

Flame instabilities play a dominant role in accelerating the burning front to a large fraction of the speed of sound in a Type Ia supernova. We present a three-dimensional numerical simulation of a Rayleigh-Taylor unstable carbon flame, following its evolution through the transition to turbulence. A low Mach number hydrodynamics method is used, freeing us from the harsh timestep restrictions imposed by sound waves. We fully resolve the thermal structure of the flame and its reaction zone, eliminating the need for a flame model. A single density is considered, $1.5\times 10^7 \gcc$, and half carbon\slash half oxygen fuel--conditions under which the flame propagated in the flamelet regime in our related two-dimensional study. We compare to a corresponding two-dimensional simulation, and show that while fire-polishing keeps the small features suppressed in two dimensions, turbulence wrinkles the flame on far smaller scales in the three-dimensional case, suggesting that the transition to the distributed burning regime occurs at higher densities in three dimensions. Detailed turbulence diagnostics are provided. We show that the turbulence follows a Kolmogorov spectrum and is highly anisotropic on the large scales, with a much larger integral scale in the direction of gravity. Furthermore, we demonstrate that it becomes more isotropic as it cascades down to small scales. Based on the turbulent statistics and the flame properties of our simulation, we compute the Gibson scale. We show the progress of the turbulent flame through a classic combustion regime diagram, indicating that the flame just enters the distributed burning regime near the end of our simulation.

astro-ph↗

Direct Numerical Simulations of Type Ia Supernovae Flames I: The Landau-Darrieus Instability

Planar flames are intrinsically unstable in open domains due to the thermal expansion across the burning front--the Landau-Darrieus instability. This instability leads to wrinkling and growth of the flame surface, and corresponding acceleration of the flame, until it is stabilized by cusp formation. We look at the Landau-Darrieus instability for C/O thermonuclear flames at conditions relevant to the late stages of a Type Ia supernova explosion. Two-dimensional direct numerical simulations of both single-mode and multi-mode perturbations using a low Mach number hydrodynamics code are presented. We show the effect of the instability on the flame speed as a function of both the density and domain size, demonstrate the existence of the small scale cutoff to the growth of the instability, and look for the proposed breakdown of the non-linear stabilization at low densities. The effects of curvature on the flame as quantified through measurements of the growth rate and computation of the corresponding Markstein number. While accelerations of a few percent are observed, they are too small to have any direct outcome on the supernova explosion.

astro-ph↗