arXiv subjects

J. Floriot

Publications and source records attributed to J. Floriot.

5 recordsLinked to original sources

arXiv2026

PROVIDENCE: a ground station for space observation

PROVIDENCE is an ONERA-led project to install a new-generation optical ground station at the Haute-Provence Observatory (OHP) in South of France. Built around a 2.5-meter aperture, the station addresses five core science cases: space domain awareness, astronomy, laser activities and communications, atmospheric characterization, and instrumental prototyping. The project is organized into three parallel subprojects covering the telescope (Providence T), the building (Providence B), and the instruments (Providence I), the latter including the facility's first-light adaptive optics instrument, INTERSTELLAR. This paper presents the scientific motivation, the project architecture, the telescope technical specifications, the civil-engineering challenges associated with replacing the existing T152 equatorial telescope, and the station layout designed to host multiple co-active instrument teams. The project roadmap targets First Light in 2029, timed to track the close-approach flyby of asteroid Apophis.

astro-ph.IM↗

arXiv2026

Cascade adaptive optics with a second stage based on a Zernike wavefront sensor for exoplanet observations II. Validation in broadband light on the ESO/GHOST testbed

Current high-contrast facilities on the ground use extreme adaptive optics (XAO) systems to achieve contrasts down to $10^{-6}$ at 200\,mas for exoplanet observations. This performance is mainly limited by the XAO residuals due to the temporal errors in the XAO control loop. To overcome this issue, a promising solution consists in using cascade adaptive optics with a fast second stage. This approach was recently validated for a control loop based on a Zernike wavefront sensor (ZWFS) in monochromatic light. As wavefront sensors operate in broadband light to maximise photon sensitivity, this work aims to validate the ZWFS-based control loop in polychromatic light and assess its performance over a wide range of seeings, wind speeds, and stellar fluxes. Experiments were conducted on the ESO's GPU-based High-order adaptive OpticS Testbench (GHOST) testbed to probe our scheme in polychromatic light. Residual aberrations from a first-stage XAO system were simulated and our approach was evaluated in narrowband and broadband light through contrast in Lyot coronagraphic images. Closing the ZWFS-based control loop consistently improves contrast within its correction region in most tested conditions. After subtraction of quasi-static aberrations, our loop reaches a contrast gain up to one order of magnitude, independently of bandwidth and turbulence strength. The broadband and narrowband cases match in performance for bright sources, while narrowband remains slightly preferable for faint targets. These results demonstrate the feasibility of broadband ZWFS-based control loop and underline promising avenues with achromatic masks and an accurate calibration of quasi-static aberrations for future high-contrast imaging on Extremely Large Telescopes.

astro-ph.IM↗

arXiv2026

COLIBRI (SVOM/FM-GFT): Instrumentation and Performances on the SVOM Alerts

COLIBRI, the French Mexican Ground Followup Telescope (FM GFT) for SVOM, is a 1.3 meter rapid response optical facility specifically developed for prompt, multiband observations of GRB afterglows and for delivering subarcsecond localisations of optical counterparts for detailed followup studies. The telescope operates through a fully automated system that manages the entire workflow, from alert reception to counterpart identification. Commissioning results confirm that the telescope meets design specifications, and this paper presents a comprehensive performance assessment of the capabilities.

astro-ph.IM↗

arXiv2024

Cascade adaptive optics with a second stage based on a Zernike wavefront sensor for exoplanet observations

Over the past decade, the high-contrast observation of disks and gas giant planets around nearby stars has been made possible on ground-based instruments using extreme adaptive optics (XAO). While these facilities produce images with a Strehl ratio larger than 90% in H-band in median observing conditions and high-flux regime, the correction leaves AO residuals which impede the study of fainter or less massive exoplanets. Cascade AO systems with a fast second stage based on a Pyramid wavefront sensor have recently emerged as an appealing solution to reduce the atmospheric wavefront errors. Since these aberrations are expected to be small, they can also be accurately measured by a Zernike wavefront sensor (ZWFS), a well-known concept for its high sensitivity and moderate linear capture range. We propose an alternative second stage that relies on the ZWFS to correct for the AO residuals. We implemented the cascade AO with a ZWFS-based control loop on the ESO's GHOST testbed to validate the scheme in monochromatic light. In median wind speed and seeing, our second-stage AO with a ZWFS and a basic integrator reduce the atmospheric residuals by a factor of 6 and increase the wavefront error stability with a gain of 2 from open to closed loop. In the presence of non common path aberrations, we also reach a contrast gain by a factor of 2 in the images with a Lyot coronagraph at short separations from the source, proving the ability of our scheme to work in cascade with an XAO loop. In addition, it may prove useful for imaging fainter or lighter close-in companions. In more challenging conditions, contrast improvements are also achieved by adjusting the control loop features. Our study validates the ZWFS-based second-stage AO loop as an effective solution to address small residuals left from a single-stage XAO system for the coronagraphic observations of circumstellar environments.

astro-ph.IM↗

arXiv2022

Validation of strategies for coupling exoplanet PSFs into single-mode fibres for high-dispersion coronagraphy

On large ground-based telescopes, the combination of extreme adaptive optics (ExAO) and coronagraphy with high-dispersion spectroscopy (HDS), sometimes referred to as high-dispersion coronagraphy (HDC), is starting to emerge as a powerful technique for the direct characterisation of giant exoplanets. The high spectral resolution not only brings a major gain in terms of accessible spectral features but also enables a better separation of the stellar and planetary signals. Ongoing projects such as Keck/KPIC, Subaru/REACH, and VLT/HiRISE base their observing strategy on the use of a few science fibres, one of which is dedicated to sampling the planet's signal, while the others sample the residual starlight in the speckle field. The main challenge in this approach is to blindly centre the planet's point spread function (PSF) accurately on the science fibre, with an accuracy of less than 0.1 $\lambda/D$ to maximise the coupling efficiency. In the context of the HiRISE project, three possible centring strategies are foreseen, either based on retro-injecting calibration fibres to localise the position of the science fibre or based on a dedicated centring fibre. We implemented these three approaches, and we compared their centring accuracy using an upgraded setup of the MITHiC high-contrast imaging testbed, which is similar to the setup that will be adopted in HiRISE. Our results demonstrate that reaching a specification accuracy of 0.1 $\lambda/D$ is extremely challenging regardless of the chosen centring strategy. It requires a high level of accuracy at every step of the centring procedure, which can be reached with very stable instruments. We studied the contributors to the centring error in the case of MITHiC and we propose a quantification for some of the most impacting terms.

astro-ph.IM↗