Cascade adaptive optics with a second stage based on a Zernike wavefront sensor for exoplanet observations II. Validation in broadband light on the ESO/GHOST testbed

Abstract

Current high-contrast facilities on the ground use extreme adaptive optics (XAO) systems to achieve contrasts down to $10^{-6}$ at 200\,mas for exoplanet observations. This performance is mainly limited by the XAO residuals due to the temporal errors in the XAO control loop. To overcome this issue, a promising solution consists in using cascade adaptive optics with a fast second stage. This approach was recently validated for a control loop based on a Zernike wavefront sensor (ZWFS) in monochromatic light. As wavefront sensors operate in broadband light to maximise photon sensitivity, this work aims to validate the ZWFS-based control loop in polychromatic light and assess its performance over a wide range of seeings, wind speeds, and stellar fluxes. Experiments were conducted on the ESO's GPU-based High-order adaptive OpticS Testbench (GHOST) testbed to probe our scheme in polychromatic light. Residual aberrations from a first-stage XAO system were simulated and our approach was evaluated in narrowband and broadband light through contrast in Lyot coronagraphic images. Closing the ZWFS-based control loop consistently improves contrast within its correction region in most tested conditions. After subtraction of quasi-static aberrations, our loop reaches a contrast gain up to one order of magnitude, independently of bandwidth and turbulence strength. The broadband and narrowband cases match in performance for bright sources, while narrowband remains slightly preferable for faint targets. These results demonstrate the feasibility of broadband ZWFS-based control loop and underline promising avenues with achromatic masks and an accurate calibration of quasi-static aberrations for future high-contrast imaging on Extremely Large Telescopes.