arXiv subjects

J. Morris

Publications and source records attributed to J. Morris.

8 recordsLinked to original sources

arXiv2016

"PROCESS": a systems code for fusion power plants - Part 2:Engineering

PROCESS is a reactor systems code - it assesses the engineering and economic viability of a hypothetical fusion power station using simple models of all parts of a reactor system. PROCESS allows the user to choose which constraints to impose and which to ignore, so when evaluating the results it is vital to study the list of constraints used. New algorithms submitted by collaborators can be incorporated - for example safety, first wall erosion, and fatigue life will be crucial and are not yet taken into account. This paper describes algorithms relating to the engineering aspects of the plant. The toroidal field (TF) coils and the central solenoid are assumed by default to be wound from niobium-tin superconductor with the same properties as the ITER conductors. The winding temperature and induced voltage during a quench provide a limit on the current density in the TF coils. Upper limits are placed on the stresses in the structural materials of the TF coil, using a simple two-layer model of the inboard leg of the coil. The thermal efficiency of the plant can be estimated using the maximum coolant temperature, and the capacity factor is derived from estimates of the planned and unplanned downtime, and the duty cycle if the reactor is pulsed. An example of a pulsed power plant is given.

physics.ins-det↗

arXiv2015

The global build-up to intrinsic ELM bursts seen in divertor full flux loops in Jet

A global signature of the build-up to an intrinsic ELM is found in the phase of signals measured in full flux azimuthal loops in the divertor region of JET. Full flux loop signals provide a global measurement proportional to the voltage induced by changes in poloidal magnetic flux; they are electromagnetically induced by the dynamics of spatially integrated current density. We perform direct time-domain analysis of the high time-resolution full flux loop signals VLD2 and VLD3. We analyze plasmas where a steady H-mode is sustained over several seconds, during which all the observed ELMs are intrinsic; there is no deliberate intent to pace the ELMing process by external means. ELM occurrence times are determined from the Be II emission at the divertor. We previously found that the occurrence times of intrinsic ELMs correlate with specific phases of the VLD2 and VLD3 signals. Here, we investigate how the VLD2 and VLD3 phases vary with time in advance of the ELM occurrence time. We identify a build-up to the ELM in which the VLD2 and VLD3 signals progressively align to the phase at which ELMs preferentially occur, on a ~ 2 -5ms timescale. At the same time, the VLD2 and VLD3 signals become phase synchronized with each other, consistent with the emergence of coherent global dynamics in the integrated current density. In a plasma that remains close to a global magnetic equilibrium, this can reflect bulk displacement or motion of the plasma. This build-up signature to an intrinsic ELM can be extracted from a time interval of data that does not extend beyond the ELM occurrence time, so that these full flux loop signals could assist in ELM prediction or mitigation.

physics.plasm-ph↗

arXiv2014

The unintended influence of control systems on edge-plasma transport and stability in the Joint European Torus

A unique experiment in the Joint European Torus (JET) consecutively produced 120 almost identical plasma pulses, providing two orders of magnitude more data than is usually available. This allows the statistical detection of previously unobservable phenomena such as a sequence of resonant-like waiting times between edge-localised instabilities (ELMs). Here we investigate the causes of this phenomenon. By synchronising data to the 1000s of ELM times and averaging the results, random errors are reduced by a factor of 50, allowing unprecedentedly detailed behaviour to be described. A clear link can then be observed between plasma confinement, ELM occurrence, vertical plasma oscillations, and an otherwise unobservable oscillation in a control coil current that is not usually associated with ELM occurrence. The results suggest a strong and unanticipated edge-plasma dependence on control system behaviour.

physics.plasm-ph↗

arXiv2013

Time-Resonant Tokamak Plasma Edge Instabilities?

For a two week period during the Joint European Torus (JET) 2012 experimental campaign, the same high confinement plasma was repeated 151 times. The dataset was analysed to produce a probability density function (pdf) for the waiting times between edge-localised plasma instabilities ("ELMS"). The result was entirely unexpected. Instead of a smooth single peaked pdf, a succession of 4-5 sharp maxima and minima uniformly separated by 7-8 millisecond intervals was found. Here we explore the causes of this newly observed phenomenon, and conclude that it is either due to a self-organised plasma phenomenon or an interaction between the plasma and a real-time control system. If the maxima are a result of "resonant" frequencies at which ELMs can be triggered more easily, then future ELM control techniques can, and probably will, use them. Either way, these results demand a deeper understanding of the ELMing process.

physics.plasm-ph↗

arXiv2013

The Electromagnetic Calorimeter for the T2K Near Detector ND280

The T2K experiment studies oscillations of an off-axis muon neutrino beam between the J-PARC accelerator complex and the Super-Kamiokande detector. Special emphasis is placed on measuring the mixing angle theta_13 by observing electron neutrino appearance via the sub-dominant muon neutrino to electron neutrino oscillation, and searching for CP violation in the lepton sector. The experiment includes a sophisticated, off-axis, near detector, the ND280, situated 280 m downstream of the neutrino production target in order to measure the properties of the neutrino beam and to understand better neutrino interactions at the energy scale below a few GeV. The data collected with the ND280 are used to study charged- and neutral-current neutrino interaction rates and kinematics prior to oscillation, in order to reduce uncertainties in the oscillation measurements by the far detector. A key element of the near detector is the ND280 electromagnetic calorimeter (ECal), consisting of active scintillator bars sandwiched between lead sheets and read outwith multi-pixel photon counters (MPPCs). The ECal is vital to the reconstruction of neutral particles, and the identification of charged particle species. The ECal surrounds the Pi-0 detector (P0D) and the tracking region of the ND280, and is enclosed in the former UA1/NOMAD dipole magnet. This paper describes the design, construction and assembly of the ECal, as well as the materials from which it is composed. The electronic and data acquisition (DAQ) systems are discussed, and performance of the ECal modules, as deduced from measurements with particle beams, cosmic rays, the calibration system, and T2K data, is described.

physics.ins-det↗

arXiv2011

Hamiltonian cycles in Cayley graphs whose order has few prime factors

We prove that if Cay(G;S) is a connected Cayley graph with n vertices, and the prime factorization of n is very small, then Cay(G;S) has a hamiltonian cycle. More precisely, if p, q, and r are distinct primes, then n can be of the form kp with k < 32 and k not equal to 24, or of the form kpq with k < 6, or of the form pqr, or of the form kp^2 with k < 5, or of the form kp^3 with k < 3.

math.CO↗

arXiv2001

Status Report for the RHIC Control System*

The Relativistic Heavy Ion Collider (RHIC) at Brookhaven has completed nearly two years of successful commissioning and operation. The control system is briefly reviewed and its contribution to the RHIC effort is analyzed, with emphasis on special challenges and innovative design: continuing efforts are also discussed.

physics.acc-ph↗

arXiv2001

Description of the RHIC Sequencer System

The movement of the Relativistic Heavy Ion Collider (RHIC) through its various states (eg. injection, acceleration, storage, collisions) is controlled by an application called the Sequencer. This program orchestrates most magnet and instrumentation systems and is responsible for the coordinated acquisition and saving of data from various systems. The Sequencer system, its software infrastructure, support programs, and the language used to drive it are discussed in this paper. Initial operational experience is also described.

physics.acc-ph↗