arXiv subjects

J. P. Pekola

Publications and source records attributed to J. P. Pekola.

At least 19 recordsLinked to original sources

arXiv2025

Applications of Superconductor-Normal Metal Interfaces

The importance and non-trivial properties of superconductor normal metal interfaces was discovered by Alexander Fyodorovich Andreev more than 60 years ago. Only much later these hybrids have found wide interest in applications such as thermometry and refrigeration, electrical metrology, and quantum circuit engineering. Here we discuss the central properties of such interfaces and describe some of the most prominent and recent applications of them.

cond-mat.supr-con↗

arXiv2022

A superconductor free of quasiparticles for seconds

Superconducting devices, based on the Cooper pairing of electrons, play an important role in existing and emergent technologies, ranging from radiation detectors to quantum computers. Their performance is limited by spurious quasiparticle excitations formed from broken Cooper pairs. Efforts to achieve ultra-low quasiparticle densities have reached time-averaged numbers of excitations on the order of one in state-of-the-art devices. However, the dynamics of the quasiparticle population as well as the time scales for adding and removing individual excitations remain largely unexplored. Here, we experimentally demonstrate a superconductor completely free of quasiparticles for periods lasting up to seconds. We monitor the quasiparticle number on a mesoscopic superconductor in real time by measuring the charge tunneling to a normal metal contact. Quiet, excitation-free periods are interrupted by random-in-time Cooper pair breaking events, followed by a burst of charge tunneling within a millisecond. Our results demonstrate the possibility of operating devices without quasiparticles with potentially improved performance. In addition, our experiment probes the origins of nonequilibrium quasiparticles in our device; the decay of the Cooper pair breaking rate over several weeks following the initial cooldown rules out processes arising from cosmic or long-lived radioactive sources.

cond-mat.supr-con↗

arXiv2022

Calorimetry of a Quantum Phase Slip

In a Josephson junction, which is the central element in superconducting quantum technology, irreversibility arises from abrupt slips of the gauge-invariant quantum phase difference across the contact. A quantum phase slip (QPS) is often visualized as the tunneling of a flux quantum in the transverse direction to the superconducting weak link, which produces dissipation. In this work, we detect the instantaneous heat release caused by a QPS in a Josephson junction using time-resolved electron thermometry on a nanocalorimeter, signaled by an abrupt increase of the local electronic temperature in the weak link and subsequent relaxation back to equilibrium. Beyond providing a cornerstone in experimental quantum thermodynamics in form of observation of heat in an elementary quantum process, this result sets the ground for experimentally addressing the ubiquity of dissipation, including that in superconducting quantum sensors and qubits.

cond-mat.mes-hall↗

arXiv2022

Electrostatic control of quasiparticle poisoning in a hybrid semiconductor-superconductor island

The performance of superconducting devices is often degraded by the uncontrolled appearance and disappearance of quasiparticles, a process known as poisoning. We demonstrate electrostatic control of quasiparticle poisoning in the form of single-charge tunneling across a fixed barrier onto a Coulomb island in an InAs/Al hybrid nanowire. High-bandwidth charge sensing was used to monitor charge occupancy of the island across Coulomb blockade peaks, where tunneling rates were maximal, and Coulomb valleys, where tunneling was absent. Electrostatic gates changed on-peak tunneling rates by two orders of magnitude for a barrier with fixed normal-state resistance, which we attribute to gate dependence of the size and softness of the induced superconducting gap on the island, corroborated by separate density-of-states measurements. Temperature and magnetic field dependence of tunneling rates are also investigated.

cond-mat.mes-hall↗

arXiv2021

A self-calibrating superconducting pair-breaking detector

We propose and experimentally demonstrate a self-calibrating detector of Cooper pair depairing in a superconductor based on a mesoscopic superconducting island coupled to normal metal leads. On average, exactly one electron passes through the device per broken Cooper pair, independent of the absorber volume, device or material parameters. The device operation is explained by a simple analytical model and verified with numerical simulations in quantitative agreement with experiment. In a proof-of-concept experiment, we use such a detector to measure the high-frequency phonons generated by another, electrically decoupled superconducting island, with a measurable signal resulting from less than 10 fW of dissipated power.

cond-mat.supr-con↗

arXiv2021

Coulomb Blockade Thermometry on a Wide Temperature Range

The Coulomb Blockade Thermometer (CBT) is a primary thermometer for cryogenic temperatures, with demonstrated operation from below 1 mK up to 60 K. Its performance as a primary thermometer has been verified at temperatures from 20 mK to 200 mK at uncertainty level below 1 % (k = 2). In a new project, our aim is to extend the metrologically verified temperature range of the primary CBT up to 25 K. We also demonstrate close-to-ideal operation of a CBT with only two tunnel junctions when the device is embedded in a low-impedance environment.

physics.app-ph↗

arXiv2020

Dynamic thermal relaxation in metallic films at sub-kelvin temperatures

The performance of low temperature detectors utilizing thermal effects is determined by their energy relaxation properties. Usually, heat transport experiments in mesoscopic structures are carried out in the steady-state, where temperature gradients do not change in time. Here, we present an experimental study of dynamic thermal relaxation in a mesoscopic system -- thin metallic film. We find that the thermal relaxation of hot electrons in copper and silver films is characterized by several time constants, and that the annealing of the films changes them. In most cases, two time constants are observed, and we can model the system by introducing an additional thermal reservoir coupled to the film electrons. We determine the specific heat of this reservoir and its coupling to the electrons. The experiments point at the importance of grain structure on the thermal relaxation of electrons in metallic films.

cond-mat.mes-hall↗

arXiv2020

Spatial and energy resolution of electronic states by shot noise

Shot noise measurements are widely used for the characterization of nonequilibrium configurations in electronic conductors. The recently introduced quantum tomography approach was implemented for the studies of electronic wavefunctions of few-electron excitations created by periodic voltage pulses in phase-coherent ballistic conductors based on the high-quality GaAs two-dimensional electron gas. Still relying on the manifestation of Fermi correlations in noise, we focus on the simpler and more general approach beneficial for the local measurements of energy distribution (ED) in electronic systems with arbitrary excitations with well-defined energies and random phases. Using biased diffusive metallic wire as a testbed, we demonstrate the power of this approach and extract the well-known double-step ED from the shot noise of a weakly coupled tunnel junction. Our experiment paves the way for the local measurements of generic nonequilibrium configurations applicable to virtually any conductor.

cond-mat.mes-hall↗

arXiv2019

Detecting parity effect in a superconducting device in the presence of parity switches

We present a superconducting device showing a clear parity effect in the number of electrons, even when there is, on average, a single nonequilibrium quasiparticle present and the parity of the island switches due to quasiparticles tunneling in and out of the device at rates on the order of 100 Hz. We detect the switching by monitoring in real time the charge state of a superconducting island connected to normal leads by tunnel junctions. The quasiparticles are created by Cooper pairs breaking on the island at a rate of a few kHz. We demonstrate that the pair breaking is caused by the backaction of the single-electron transistor used as a charge detector. With sufficiently low probing currents, our superconducting island is free of quasiparticles 97% of the time.

cond-mat.mes-hall↗

arXiv2019

Crossover between electron-phonon and boundary resistance limited thermal relaxation in copper films

We observe a crossover from electron-phonon (ep) coupling limited energy relaxation to that governed by thermal boundary resistance (pp) in copper films at sub-kelvin temperatures. Our measurement yields a quantitative picture of heat currents, in terms of temperature dependences and magnitudes, in both ep and pp limited regimes, respectively. We show that by adding a third layer in between the copper film and the substrate, the thermal boundary resistance is increased fourfold, consistent with an assumed series connection of thermal resistances.

cond-mat.mes-hall↗

arXiv2019

Electronic structure of mesoscopic superconducting disk: Quasiparticle tunneling between the giant vortex core and disk edge

The electronic structure of the giant vortex states in a mesoscopic superconducting disk is studied in a dirty limit using the Usadel approach. The local density of states profiles are shown to be strongly affected by the effect of quasiparticle (QP) tunneling between the states localized in the vortex core and the ones bound to the sample edge. Decreasing temperature leads to a crossover between the edge-dominated and core-dominated regimes in the magnetic field dependence of the tunneling conductance. This crossover is discussed in the context of the efficiency of quasiparticle cooling by the magnetic field induced QP traps in various mesoscopic superconducting devices.

cond-mat.supr-con↗

arXiv2018

Thermodynamics in Single-Electron Circuits and Superconducting Qubits

Classical and quantum electronic circuits provide ideal platforms to investigate stochastic thermodynamics and they have served as a stepping stone to realize Maxwell's demons with highly controllable protocols. In this article we first review the central thermal phenomena in quantum nanostructures. Thermometry and basic refrigeration methods will be described as enabling tools for thermodynamics experiments. Next we discuss the role of information in thermodynamics which leads to the concept of Maxwell's demon. Various Maxwell's demons realized in single-electron circuits over the past couple of years will be described. Currently true quantum thermodynamics in superconducting circuits is in focus of attention, and we end the review by discussing the ideas and first experiments in this exciting area of research.

cond-mat.stat-mech↗

arXiv2018

Nanoscale Quantum Calorimetry with Electronic Temperature Fluctuations

Motivated by the recent development of fast and ultra-sensitive thermometry in nanoscale systems, we investigate quantum calorimetric detection of individual heat pulses in the sub-meV energy range. We propose a hybrid superconducting injector-calorimeter set-up, with the energy of injected pulses carried by tunneling electrons. Treating all heat transfer events microscopically, we analyse the statistics of the calorimeter temperature fluctuations and derive conditions for an accurate measurement of the heat pulse energies. Our results pave the way for novel, fundamental quantum thermodynamics experiments, including calorimetric detection of single microwave photons.

cond-mat.mes-hall↗

arXiv2018

Thermodynamic fingerprints of non-Markovianity in a system of coupled superconducting qubits

The exploitation and characterization of memory effects arising from the interaction between system and environment is a key prerequisite for quantum reservoir engineering beyond the standard Markovian limit. In this paper we investigate a prototype of non-Markovian dynamics experimentally implementable with superconducting qubits. We rigorously quantify non-Markovianity highlighting the effects of the environmental temperature on the Markovian to non-Markovian crossover. We investigate how memory effects influence, and specifically suppress, the ability to perform work on the driven qubit. We show that the average work performed on the qubit can be used as a diagnostic tool to detect the presence or absence of memory effects.

quant-ph↗

arXiv2018

Anomalous electronic heat capacity of copper nanowires at sub-kelvin temperatures

We have measured the electronic heat capacity of thin film nanowires of copper and silver at temperatures 0.1 - 0.3 K; the films were deposited by standard electron-beam evaporation. The specific heat of the Ag films of sub-100 nm thickness agrees with the bulk value and the free-electron estimate, whereas that of similar Cu films exceeds the corresponding reference values by one order of magnitude. The origin of the anomalously high heat capacity of copper films remains unknown for the moment. Based on the low heat capacity and the possibility to devise a tunnel probe thermometer on it, the Ag films form a promising absorber material, e.g., for micro-wave photon calorimetry.

cond-mat.mes-hall↗

arXiv2017

Nonlocality and dynamic response of Majorana states in fermionic superfluids

We suggest a microscopic model describing the nonlocal ac response of a pair of Majorana states in fermionic superfluids beyond the tunneling approximation. The time-dependent perturbations of quasiparticle transport are shown to excite finite period beating of the wavefunction between the distant Majorana states. We propose an experimental test to measure the characteristic time scales of quasiparticle transport through the pair of Majorana states defining, thus, quantitative characteristics of nonlocality known to be a generic feature of Majorana particles.

cond-mat.supr-con↗

arXiv2017

Magnetometry with low resistance proximity Josephson junction

We characterize a niobium-based superconducting quantum interference proximity transistor (Nb-SQUIPT) built upon a Nb-Cu-Nb SNS weak link. The Nb-SQUIPT and SNS devices are fabricated simultaneously in two separate lithography and deposition steps, relying on Ar ion cleaning of the Nb contact surfaces. The quality of the Nb-Cu interface is characterized by measuring the temperature-dependent equilibrium critical supercurrent of the SNS junction. In the Nb-SQUIPT device, we observe a maximum flux-to-current transfer function value of about 55 nA/Φ_0 in the sub-gap regime of bias voltages. This results in suppression of power dissipation down to a few fW. The device can implement a low-dissipation SQUIPT, improving by up to two orders of magnitude compared to a conventional device based on an Al-Cu-Al SNS junction and an Al tunnel probe (Al-SQUIPT).

cond-mat.supr-con↗

arXiv2017

Hybrid single-electron turnstiles with thick superconducting electrodes for improved quasiparticle relaxation

We demonstrate shadow evaporation-based fabrication of high-quality ultrasmall normal metal -- insulator -- superconductor tunnel junctions where the thickness of the superconducting electrode is not limited by the requirement of small junction size. The junctions are formed between a film of manganese-doped aluminium acting as the normal conducting electrode, covered by a thicker, superconducting layer of pure Al. We characterize the junctions by sub-gap current--voltage measurements and charge pumping measurements in a gate-driven hybrid single-electron transistor, operated as a turnstile for single electrons. The technique allows to advance towards turnstiles with close to ideally thermalized superconducting reservoirs, prerequisite for reaching metrological current quantization accuracy in a hybrid turnstile. We further present an alternative way to realize small junctions with thick Al leads based on multi-angle deposition. The work enables the future investigation of turnstiles based on superconductors other than Al, and benefits various other Al tunnel junction devices for which quasiparticle thermalization is essential.

cond-mat.mes-hall↗