Searcharxiv⌕ Search

arXiv subjects

Jaafar M. H. Elmirghani

Publications and source records attributed to Jaafar M. H. Elmirghani.

At least 19 recordsLinked to original sources

Cooperative Dueling DQN SAC Learning for Energy Efficiency in Dynamic OWC Networks

Growing wireless traffic is increasing pressure on the congested radio-frequency spectrum. Optical wireless communication (OWC) provides a complementary solution by using the abundant unlicensed optical spectrum. However, indoor OWC networks are dynamic: users move, enter or leave the network, and subscribe to different services. Poorly coordinated resource allocation can consequently waste subcarriers, require excessive transmission power and cause frequent AP reassignments. Energy efficiency (EE), defined as the total delivered data rate divided by the total network power consumption, therefore requires the serving AP, number of allocated subcarriers, and transmission power to be jointly adapted while maintaining QoS. Optimising these in a dynamic time series, multi-service OWC environment produces a complex sequential EE optimisation problem. To address this problem, this work proposes Dual-Agent Resource Allocation using Deep Reinforcement Learning (DARA-DRL). DARA-DRL combines a branching duelling deep Q-network for association and subcarrier allocation with a conditional soft actor-critic agent for continuous power control. The agents are coupled through a common reward and a cooperative value update that evaluates each discrete allocation together with its corresponding power decision. Simulation results show that DARA-DRL remains within 5\% of the optimal solution and, compared with state-of-the-art benchmarks, it improves EE by 28.8\% and QoS satisfaction by 10.5\%, while reducing online decision time by 14.5\%. Results demonstrate that agent specialisation simplifies mixed-action learning, and cooperation outperforms independently trained agents.

eess.SY↗

Network Adaptation in IRS-Aided Hybrid RF/VLC Systems Using Cooperative Multi-Agent DRL

Hybrid radio frequency (RF) and visible light communication (VLC) networks have emerged as a promising solution for high-capacity indoor wireless connectivity in sixth-generation (6G) systems. However, the limited optical coverage and vulnerability of VLC links to line-of-sight (LoS) blockage under user mobility remain fundamental challenges. In this work, a mirror-based intelligent reflecting surface (IRS) is deployed to assist a dynamic indoor hybrid RF/VLC network, where each mobile user is exclusively assigned to either the IRS-enhanced VLC subnetwork or the RF subnetwork through a binary selection decision. A joint optimization problem is then formulated to maximize proportional fairness by jointly optimizing the RF/VLC technology selection, power allocation, and IRS mirror roll and yaw orientation angles. To enable real-time adaptability, the problem is reformulated as a Markov decision process (MDP) and solved using a cooperative multi-agent deep reinforcement learning (DRL) algorithm based on centralized training with decentralized execution. Simulation results demonstrate the superior performance of the optimized hybrid network compared with optimized standalone VLC and RF networks. The results further validate the practicality and effectiveness of the proposed DRL framework compared to widely adopted DRL algorithms as well as conventional model-based optimization approaches.

eess.SY↗

Energy-Efficient Joint Optimization of VLC and Fog Computing Resources Allocation

In this paper, we consider an indoor networking architecture in which visible light communication (VLC) provides wireless connectivity between users and distributed fog computing resources and an energy-efficient passive optical network (PON)- based backhaul interconnects the VLC access points (APs). We investigate the joint optimization of the allocation of VLC and fog computing resources aiming to minimize processing and networking power consumption. We develop a mixed-integer linear programming (MILP) model that jointly optimizes access points (APs) selection, wavelength assignment and fog computing resources allocation to serve the requests of users. Compared to a statically preconfigured AP selection and wavelength assignment based on maximizing signal-to-interference-plus-noise ratio (SINR) independently of fog resource placement, the joint optimization achieves lower average total power consumption, driven by a reduction in processing power. These savings are attributed to the ability of the joint optimization to allow AP sharing across users and selecting more energy-efficient wavelengths that still satisfy quality of service (QoS) requirements.

cs.NI↗

Mobility Aware Power Control for VCSEL Based Indoor OWC

Optical wireless communication (OWC) is a promising technology for supporting data intensive services in indoor environments due to its large unregulated spectrum, high spatial reuse, and potential for multigigabit data rates. In particular, vertical cavity surface emitting laser (VCSEL) based systems enable highly directional transmission, allowing efficient spatial separation of users and improved link performance. However, the use of narrow optical beams also makes system performance highly sensitive to user mobility and device orientation, as movement directly affects beam alignment and optical channel gain. Consequently, power allocation strategies that ignore mobility dynamics often provision excess optical power to maintain reliable connectivity, resulting in inefficient energy use. In this work, a power control framework for dynamic indoor OWC networks that explicitly accounts for mobility driven channel variation is developed. It uses a hybrid Gauss Markov and learning based approach that captures both user movement continuity and behaviour driven orientation changes. The mobility states are then used to guide power allocation decisions. Simulation results show that incorporating mobility aware channel prediction enables more accurate power allocation, and improves energy efficiency compared with conventional power control schemes in dynamic indoor environments.

eess.SP↗

A Hybrid Gauss Markov LSTM Mobility Model for Indoor OWC

Optical wireless communication (OWC) has emerged as a promising candidate for future high-capacity indoor wireless networks, driven by its large unregulated spectrum, high spatial reuse, and ability to support multi-gigabit data rates. However, OWC systems are highly sensitive to user mobility, as link performance depends strongly on the spatial alignment between transmitter and receiver. Accurate modelling of user position and device orientation is therefore essential for reliable channel estimation and system evaluation. To that effect, this paper proposes a hybrid Gauss--Markov and long short-term memory (GM--LSTM) mobility model for indoor OWC environments. The Gauss--Markov component captures the temporal correlation of user motion, while the LSTM learns residual behaviour to model non-linear movement patterns and orientation dynamics. The proposed model jointly predicts user position and device orientation, enabling improved representation of mobility in OWC channels. Performance is evaluated using prediction accuracy and per-user data rate evolution. Results show that the proposed hybrid GM--LSTM model outperforms conventional Random Waypoint and Gauss--Markov models, providing more accurate mobility prediction and more stable communication performance in dynamic indoor environments.

eess.SP↗

Energy Efficient Point-to-Point PON-based Architecture for the Backhaul of a VLC System

This paper proposes a point-to-point passive optical network (P2P-PON) architecture as an energy-efficient and low-latency backhaul solution for visible light communication (VLC)-enabled indoor fog computing systems. The proposed architecture passively interconnects VLC access points and distributed in-building fog servers through dedicated optical links, enabling flexible peer-to-peer connectivity and efficient traffic aggregation. A mixed integer linear programming (MILP) framework is developed to jointly optimize processing resource allocation, traffic routing, power consumption, and end-to-end queuing delay across a multi-layer fog computing infrastructure. The model explicitly captures the power consumption of both networking and processing elements and incorporates a piecewise linear approximation of an M/M/1 queuing model to represent delay-sensitive applications. The performance of the proposed P2P-PON architecture is evaluated and compared against an arrayed waveguide grating router (AWGR)-based PON architecture under multiple indoor traffic scenarios. The results show that the proposed P2P-PON architecture reduces total power consumption by up to 64\% under power-aware optimization and by 15\% under delay-aware optimization, while reducing average end-to-end queuing delay by up to 76\% compared to the AWGR-PON architecture, due to the improved in-building connectivity and more effective utilization of distributed fog resources.

cs.NI↗

Machine Learning-Driven Adaptive Power Allocation for Optical Wireless Networks

Vertical Cavity Surface Emitting Lasers (VCSELs) have gained popularity in Optical Wireless Communication (OWC) due to their high modulation bandwidth, narrow spectral width, and directional beam, offering improved spectral efficiency and reduced multipath dispersion compared to Light Emitting Diodes (LEDs). In this work, we explore the deployment of VCSELs as Access Points (APs) in an indoor environment under mobility and time varying user distributions. To enhance performance, a Merged Access Point (MAP) topology is introduced to extend the serving area of each cell, whilst Zero Forcing (ZF) precoding is employed for inter user interference management. A sum rate maximisation problem is then formulated to maintain high quality network operation in the dynamic environment. Although deterministic methods can solve the formulated problem, they become impractical in real time due to computational complexity, particularly under high user mobility and rapidly changing channel conditions. To address this, we propose a hybrid Machine Learning (ML) based solution combining a low complexity distance based user association algorithm with a Convolutional Neural Network (CNN) for adaptive power allocation. Simulation results show that the proposed hybrid association CNN framework achieves near optimal performance while substantially reducing computation complexity relative to optimisation based schemes. Furthermore, it operates in real time, with measured median and P95 inference latencies in the millisecond range, and maintains a small empirical worst-case gap to the Mixed Integer Linear Programming (MILP) optimum, demonstrating both practicality and robustness under mobility.

eess.SP↗

Dynamic Power Allocation For NOMA-Based Transmission in 6G Optical Wireless Networks

OWC has been considered as a key enabling technology to unlock unprecedented speeds of communication, supporting high demands of data traffic. In this paper, infrared lasers are used as optical transmitters operating in an indoor environment under eye safety regulations due to their high modulation speed. To provide efficient multiple access service, NOMA-based transmission is implemented to multiplex messages intended to multiple users in the power domain and maximize the spectral efficiency of our laser-based OWC network. In particular, a BIA outer precoder is designed to coordinate the transmission among multiple APs and determine the precoding matrices for groups of users potential formed according to NOMA principles. For effective use of NOMA, an optimization problem is formulated to maximize the sum rate of the network through forming optimum groups under certain joint conditions, efficient power allocation, high quality of service for each weak and strong users, and high overall system performance. Such optimization problems are defined as max-min fractional programs difficult to solve in practice. Therefore, a dynamic application for NOMA is introduced using two algorithms. First, a RF-aided dynamic algorithm is designed to form multiple groups, where users exchange binary variables among them through an RF system to establish distance-based weight edges, which are used as a metric for the grouping process. Second, a dynamic power allocation is proposed to determine the optimum power allocated to each group, while the users belonging to a certain group receive their traffic demands regardless of their classification as weak or strong. The results show the convergence of the proposed dynamic application to the optimum solution, and its high performance in terms of sum rate, fairness, and energy efficiency compared to counterpart schemes.

eess.SY↗

Adaptive DRL for IRS Mirror Orientation in Dynamic OWC Networks

Intelligent reflecting surfaces (IRSs) have emerged as a promising solution to mitigate line-of-sight (LoS) blockages and enhance signal coverage in optical wireless communication (OWC) systems with minimal additional power. In this work, we consider a mirror-based IRS to assist a dynamic indoor visible light communication (VLC) environment. We formulate an optimization problem that aims to maximize the sum rate by adjusting the orientation of the IRS mirrors. To enable real-time adaptability, the problem is modelled as a Markov decision process (MDP), and a deep reinforcement learning (DRL) algorithm is developed based on the deterministic policy gradient for real-time mirror-based IRS optimization in dynamic VLC networks. The proposed DRL is employed to optimize mirror orientation toward mobile users under blockage and mobility constraints. Simulation results demonstrate that our proposed DRL algorithm outperforms the conventional deep Q- learning (DQL) algorithm and achieves substantial improvements in sum rate compared to random-orientation IRS configurations

eess.SY↗

Energy-efficient PON-based Backhaul Connectivity for a VLC-enabled Indoor Fog Computing Environment

In this paper, we consider the use of visible light communication (VLC) to provide connectivity to indoor fog computing resources and propose an energy-efficient passive optical network (PON)-based backhaul architecture to support the VLC system. We develop a mixed-integer linear programming (MILP) model to optimize the allocation of computing resources over the proposed architecture, aiming to minimize processing and networking power consumption. We evaluate the performance of the proposed architecture under varying workload demands and user distributions. Comparative analysis against a backhaul architecture that is based on the state-of-the-art spine-and-leaf (S&L) network design demonstrates total power savings of up to 82%. Further comparison with centralized cloud processing shows improvements in energy efficiency of up to 93%. Additionally, we examine the improvements in energy efficiency obtained by splitting tasks among multiple processing nodes and propose enhancements to the architecture including dynamic bandwidth allocation, increased wavelength bandwidth and improved connectivity within rooms to alleviate networking bottlenecks. Furthermore, we introduce an inter-building architecture that leverages resources from neighboring buildings to support high-demand scenarios.

cs.NI↗

Predictive and Proactive Power Allocation For Energy Efficiency in Dynamic OWC Networks

Driven by the exponential growth in data traffic and the limitations of Radio Frequency (RF) networks, Optical Wireless Communication (OWC) has emerged as a promising solution for high data rate communication. However, the inherently dynamic nature of OWC environments resulting from user mobility, and time-varying user demands poses significant challenges for enhanced and sustainable performance. Energy efficiency (EE) is a critical metric for the sustainable operation of next generation wireless networks. Achieving high EE in dynamic OWC environments, especially under time-varying user distributions and heterogeneous service requirements, remains a complex task. In this work, we formulate a discrete-time EE optimisation problem in a dynamic OWC to maximise energy efficiency through determining user connectivity and power allocation. Solving this problem in real time is computationally demanding due to the coupling of user association and power allocation variables over discrete time slots. Therefore, we propose a Probabilistic Demand Prediction and Optimised Power Allocation (PDP-OPA) framework which predicts user arrivals, departures, and traffic demands. Based on these predictions, the framework proactively determines AP-user associations and allocates power dynamically using a Lagrangian-based optimisation strategy. Simulation results demonstrate that the proposed PDP-OPA significantly enhances system performance, providing solutions close to the optimal ones. The proposed framework improves energy efficiency, sum rate, and bit error rate (BER) compared to distance-based user association and uniform power allocation, validating its effectiveness for real time and adaptive resource management in dynamic OWC systems.

eess.SP↗

Two-Agent DRL for Power Allocation and IRS Orientation in Dynamic NOMA-based OWC Networks

Intelligent reflecting surfaces (IRSs) technology has been considered a promising solution in visible light communication (VLC) systems due to its potential to overcome the line-of-sight (LoS) blockage issue and enhance coverage. Moreover, integrating IRS with a downlink non-orthogonal multiple access (NOMA) transmission technique for multi-users is a smart solution to achieve a high sum rate and improve system performance. In this paper, a dynamic IRS-assisted NOMA-VLC system is modeled, and an optimization problem is formulated to maximize sum energy efficiency (SEE) and fairness among multiple mobile users under power allocation and IRS mirror orientation constraints. Due to the non-convex nature of the optimization problem and the non-linearity of the constraints, conventional optimization methods are impractical for real-time solutions. Therefore, a two-agent deep reinforcement learning (DRL) algorithm is designed for optimizing power allocation and IRS orientation based on centralized training with decentralized execution to obtain fast and real-time solutions in dynamic environments. The results show the superior performance of the proposed DRL algorithm compared to standard DRL algorithms typically used for resource allocation in wireless communication. The results also show that the proposed DRL algorithm achieves higher performance compared to deployments without IRS and with randomly oriented IRS elements.

eess.SP↗

BIA Transmission in Rate Splitting-based Optical Wireless Networks

Optical wireless communication (OWC) has recently received massive interest as a new technology that can support the enormous data traffic increasing on daily basis. In particular, laser-based OWC networks can provide terabits per second (Tbps) aggregate data rates. However, the emerging OWC networks require a high number of optical access points (APs), each AP corresponding to an optical cell, to provide uniform coverage for multiple users. Therefore, inter-cell interference (ICI) and multi-user interference (MUI) are crucial issues that must be managed efficiently to provide high spectral efficiency. In radio frequency (RF) networks, rate splitting (RS) is proposed as a transmission scheme to serve multiple users simultaneously following a certain strategy. It was shown that RS provides high data rates compared to orthogonal and non-orthogonal interference management schemes. Considering the high density of OWC networks, the application of RS within each optical cell might not be practical due to severe ICI. In this paper, a new strategy is derived referred to as blind interference alignment-rate splitting (BIA-RS) to fully coordinate the transmission among the optical APs, while determining the precoding matrices of multiple groups of users formed beforehand. Therefore, RS can be implemented within each group to manage MUI. The proposed BIA-RS scheme requires two layers of power allocation to achieve high performance. Given that, a max-min fractional optimization problem is formulated to optimally distribute the power budget among the groups and the messages intended to the users of each group. Finally, a power allocation algorithm is designed with multiple Lagrangian multipliers to provide practical and sub-optimal solutions. The results show the high performance of the proposed scheme compared to other counterpart schemes.

eess.SY↗

A Novel Terabit Grid-of-Beam Optical Wireless Multi-User Access Network with Beam Clustering

In this paper, we put forward a proof of concept for sixth generation (6G) Terabit infrared (IR) laser-based indoor optical wireless networks. We propose a novel double-tier access point (AP) architecture based on an array of arrays of vertical cavity surface emitting lasers (VCSELs) to provide a seamless grid-of-beam coverage with multi-Gb/s per beam. We present systematic design and thorough analytical modeling of the AP architecture, which are then applied to downlink system modeling using non-imaging angle diversity receivers (ADRs). We propose static beam clustering with coordinated multi-beam joint transmission (CoMB-JT) for network interference management and devise various clustering strategies to address inter-beam interference (IBI) and inter-cluster interference (ICI). Non-orthogonal multiple access (NOMA) and orthogonal frequency division multiple access (OFDMA) schemes are also adopted to handle intra-cluster interference, and the resulting signal-to-interference-plus-noise ratio (SINR) and achievable data rate are derived. The network performance is studied in terms of spatial distributions and statistics of the downlink SINR and data rate through extensive computer simulations. The results demonstrate that data rates up to 15 Gb/s are achieved within the coverage area and a properly devised clustering strikes a balance between the sum rate and fairness depending on the number of users.

eess.SP↗

Reinforcement Learning for Rate Maximization in IRS-aided OWC Networks

Optical wireless communication (OWC) is envisioned as one of the main enabling technologies of 6G networks, complementing radio frequency (RF) systems to provide high data rates. One of the crucial issues in indoor OWC is service interruptions due to blockages that obstruct the line of sight (LoS) between users and their access points (APs). Recently, reflecting surfaces referred to as intelligent reflecting surfaces (IRSs) have been considered to provide improved connectivity in OWC systems by reflecting AP signals toward users. In this study, we investigate the integration of IRSs into an indoor OWC system to improve the sum rate of the users and to ensure service continuity. We formulate an optimization problem for sum rate maximization, where the allocation of both APs and mirror elements of IRSs to users is determined to enhance the aggregate data rate. Moreover, reinforcement learning (RL) algorithms, specifically Q-learning and SARSA algorithms, are proposed to provide real-time solutions with low complexity and without prior system knowledge. The results show that the RL algorithms achieve near-optimal solutions that are close to the solutions of mixed integer linear programming (MILP). The results also show that the proposed scheme achieves up to a 45% increase in data rate compared to a traditional scheme that optimizes only the allocation of APs while the mirror elements are assigned to users based on the distance.

eess.SY↗

Resilience in PON-based data centre architectures with two-tier cascaded AWGRs

This paper investigates the performance of a two-tier AWGR-based Passive Optical Network (PON) data centre architecture against an AWGR-based PON data centre architecture by considering various scenarios involving link failures to evaluate the resilience of both designs. To optimize traffic routing under different failure scenarios, a Mixed Integer Linear Programming (MILP) model is developed and the power consumption and delay performance is assessed. The results demonstrate that the two-tier AWGR architecture reduced the power consumption and the delay compared to the AWGR-based architecture by up to 10% and 61%, respectively.

cs.NI↗

Energy Efficient Service Placement for IoT Networks

In recent years, there has been a significant expansion in the Internet of Things (IoT), with a growing number of devices being connected to the internet. This has led to an increase in data collection and analysis as well as the development of new technologies and applications. The rise of IoT has also brought about new challenges, such as security concerns and energy efficiency. This study investigates a layered IoT architecture that combines fog and cloud computing, aiming to assess the impact of service placement on energy efficiency. Through simulations, we analyse energy use across Access Fog, Metro Fog, and Cloud Data Centre layers for different IoT request volumes. Findings indicate that Access Fog is optimal for single requests, while Metro Fog efficiently manages higher demands from multiple devices. The study emphasizes the need for adaptive service deployment, responsive to network load variations, to improve energy efficiency. Hence, we propose the implementation of dynamic service placement strategies within Internet of Things (IoT) environments.

cs.NI↗

Access-Point to Access-Point Connectivity for PON-based OWC Spine and Leaf Data Centre Architecture

In this paper, we propose incorporating Optical Wireless Communication (OWC) and Passive Optical Network (PON) technologies into next generation spine-and-leaf Data Centre Networks (DCNs). In this work, OWC systems are used to connect the Data Centre (DC) racks through Wavelength Division Multiplexing (WDM) Infrared (IR) transceivers. The transceivers are placed on top of the racks and at distributed Access Points (APs) in the ceiling. Each transceiver on a rack is connected to a leaf switch that connects the servers within the rack. We replace the spine switches by Optical Line Terminal (OLT) and Network Interface Cards (NIC) in the APs to achieve the desired connectivity. We benchmark the power consumption of the proposed OWC-PON-based spine-and-leaf DC against traditional spine-and-leaf DC and report 46% reduction in the power consumption when considering eight racks.

cs.NI↗