arXiv subjects

Jaafar M. H. Elmirghani

Publications and source records attributed to Jaafar M. H. Elmirghani.

At least 37 records · Page 2Linked to original sources

arXiv2024

Intelligent Reflecting Surfaces assisted Laser-based Optical Wireless Communication Networks

The increasing demand for wireless networks of higher capacity requires key-enabling technologies. Optical wireless communication (OWC) arises as a complementary technology to radio frequency (RF) systems that can support high aggregate data rates. However, OWC systems face some challenges including beam-blockage. Intelligent reflecting surfaces (IRSs) can offer alternative pathways for the optical signal, ensuring continuous connectivity. In this work, we investigate the potential of using IRS in an indoor OWC network. In particular, we define a system model of indoor OWC that employs IRS in conjunction with angle diversity transmitters (ADT) using vertical-cavity surface-emitting laser (VCSEL) arrays. The VCSEL beam is narrow, directed, and easy to block, however, it can deliver high data rates under eye safety regulations. Simulation results show that the deployment of IRS can significantly improve the achievable data rates of Laser-based OWC systems.

eess.SP↗

arXiv2023

Deep Learning-based Power Allocation in Rate Splitting Optical Wireless Networks

Optical wireless communication (OWC) provides high aggregate data rates in the range of Terabits per second (Tb/s). Specifically, OWC using infrared lasers as transmitters has been considered as a strong candidate in the next generation of wireless communication. Rate splitting (RS) is a transmission scheme derived to improve spectral efficiency in dense wireless networks. In RS, the transmitted power is allocated to different messages, common and private messages, serving multiple users simultaneously, where each user can decode the desired message following a certain procedure. Moreover, two-tier precoding RS scheme has been proposed to overcome the limitations of traditional RS in multi-group scenarios. In this context, power allocation (PA) is a crucial issue, which can affect the performance of RS. Therefore, we formulate a PA optimization problem to enhance the data rates of RS-based OWC networks. However, such optimization problems are complex due to the use of different messages intended to the users. In this paper, we design and train a deep neural network (DNN) model to determine the power allocated to the messages of RS, while fulfilling the demands of users. The results show the accuracy of our trained DNN model when used in an online phase.

eess.SP↗

arXiv2023

WDM/TDM over Passive Optical Networks with Cascaded-AWGRs for Data Centers

Data centers based on Passive Optical Networks (PONs) can provide high capacity, low cost, scalability, elasticity and high energy-efficiency. This paper introduces the use of WDM-TDM multiple access in a PON-based data center that offers multipath routing via two-tier cascaded Arrayed Waveguide Grating Routers (AWGRs) to improve the utilization of resources. A Mixed Integer Linear Programming (MILP) model is developed to optimize resource allocation while considering multipath routing. The results show that all-to-all connectivity is achieved in the architecture through the use of two different wavelength within different time slots for the communication between racks in the same or different cells, as well as with the OLT switches.

cs.NI↗

arXiv2023

Relay Assisted Multiuser OWC Systems under Human Blockage

This paper proposes using cooperative communication based on optoelectronic (O-E-O) amplify-and-forward relay terminals to reduce the influence of the blockage and shadowing resulting from human movement in a beam steering Optical Wireless Communication (OWC) system. The simulation results indicate that on average, the outage probability of the cooperative communication mode with O-E-O relay terminals is two orders of magnitude lower than the outage probability of the system without relay terminals.

eess.SP↗

arXiv2023

Multiuser beam steering OWC system based on NOMA

In this paper, we propose applying Non-Orthogonal Multiple Access (NOMA) technology in a multiuser beam steering OWC system. We study the performance of the NOMA-based multiuser beam steering system in terms of the achievable rate and Bit Error Rate (BER). We investigate the impact of the power allocation factor of NOMA and the number of users in the room. The results show that the power allocation factor is a vital parameter in NOMA-based transmission that affects the performance of the network in terms of data rate and BER.

eess.SP↗

arXiv2023

Energy Efficient Resource Allocation for Demand Intensive Applications in a VLC Based Fog Architecture

In this paper, we propose an energy efficient passive optical network (PON) architecture for backhaul connectivity in indoor visible light communication (VLC) systems. The proposed network is used to support a fog computing architecture designed to allow users with processing demands to access dedicated fog nodes and idle processing resources in other user devices (UDs) within the same building. The fog resources within a building complement fog nodes at the access and metro networks and the central cloud data center. A mixed integer linear programming (MILP) model is developed to minimize the total power consumption associated with serving demands over the proposed architecture. A scenario that considers applications with intensive demands is examined to evaluate the energy efficiency of the proposed architecture. A comparison is conducted between allocating the demands in the fog nodes and serving the demands in the conventional cloud data center. Additionally, the proposed architecture is compared with an architecture based on state-of-art Spine-and-Leaf (SL) connectivity. Relative to the SL architecture and serving all the demands in the cloud, the adoption of the PON-based architecture achieves 84% and 86% reductions, respectively.

cs.NI↗

arXiv2023

AI-Driven Resource Allocation in Optical Wireless Communication Systems

Visible light communication (VLC) is a promising solution to satisfy the extreme demands of emerging applications. VLC offers bandwidth that is orders of magnitude higher than what is offered by the radio spectrum, hence making best use of the resources is not a trivial matter. There is a growing interest to make next generation communication networks intelligent using AI based tools to automate the resource management and adapt to variations in the network automatically as opposed to conventional handcrafted schemes based on mathematical models assuming prior knowledge of the network. In this article, a reinforcement learning (RL) scheme is developed to intelligently allocate resources of an optical wireless communication (OWC) system in a HetNet environment. The main goal is to maximise the total reward of the system which is the sum rate of all users. The results of the RL scheme are compared with that of an optimization scheme that is based on Mixed Integer Linear Programming (MILP) model.

eess.SP↗

arXiv2023

Energy Efficient Laser-Based Optical Wireless Communication Networks

Rising data demands are a growing concern globally. The task at hand is to evolve current communication networks to support enhanced data rates while maintaining low latency, energy consumption and costs. To meet the above challenge, Optical Wireless Communication (OWC) technology is proposed as a solution to complement traditional Radio Frequency (RF) based communication systems. Recently, Vertical Cavity Surface Emitting Lasers (VCSELS) have been considered for data transmission in OWC indoor environments due to their ability to transmit power through narrow, near-circular beams to receivers. In this paper, we study the energy efficiency of a VCSEL-based OWC system in an indoor environment and compare it to that of a Light Emitting Diode (LED) based system. The main findings show that the VCSEL system performs better and has higher energy efficiency.

eess.SP↗

arXiv2023

Rate Splitting for 6G Optical Wireless Networks

This paper evaluates the performance of rate splitting (RS), a robust interference management scheme, in an optical wireless communication (OWC) network that uses infrared lasers referred to as vertical-cavity surface-emitting lasers (VCSELs) as optical transmitters. In 6G OWC, providing high spectral and energy efficiency requires advanced multiple access schemes that can serve multiple users simultaneously in a non-orthogonal fashion. In this context, RS has the potential to manage multi-user interference at high data rates compared to orthogonal transmission schemes. Simulation results show the high performance of RS compared to baseline approaches.

eess.SP↗

arXiv2023

Resource Allocation in IRS-aided Optical Wireless Communication Systems

One of the main challenges facing optical wireless communication (OWC) systems is service disconnection in high blockage probability scenarios where users might lose the line of sight (LoS) connection with their corresponding access points (APs). In this work, we study the deployment of passive reflecting surfaces referred to as Intelligent Reflecting Surfaces (IRSs) in indoor visible light communication (VLC) to boost users signal to noise ratio (SNR) and ensure service continuity. We formulate an optimization problem to allocate APs and the mirrors of IRSs to users such that the sum rate is increased. The results show a 35% increase in the sum rate of the IRS-aided OWC system compared to the sum rate achieved by only considering the LoS channel components. The results also shows that the deployment of IRSs improves the sum rate under LoS blockage.

eess.SY↗

arXiv2023

Cooperative Artificial Neural Networks for Rate-Maximization in Optical Wireless Networks

Recently, Optical wireless communication (OWC) have been considered as a key element in the next generation of wireless communications due to its potential in supporting unprecedented communication speeds. In this paper, infrared lasers referred to as vertical-cavity surface-emitting lasers (VCSELs) are used as transmitters sending information to multiple users. In OWC, rate-maximization optimization problems are usually complex due to the high number of optical access points (APs) needed to ensure coverage. Therefore, practical solutions with low computational time are essential to cope with frequent updates in user-requirements that might occur. In this context, we formulate an optimization problem to determine the optimal user association and resource allocation in the network, while the serving time is partitioned into a series of time periods. Therefore, cooperative ANN models are designed to estimate and predict the association and resource allocation variables for each user such that sub-optimal solutions can be obtained within a certain period of time prior to its actual starting, which makes the solutions valid and in accordance with the demands of the users at a given time. The results show the effectiveness of the proposed model in maximizing the sum rate of the network compared with counterpart models. Moreover, ANN-based solutions are close to the optimal ones with low computational time.

eess.SY↗

arXiv2022

Multi-User Rate Splitting in Optical Wireless Networks

Optical wireless communication (OWC) has recently received massive interest as a new technology that can support the enormous data traffic increasing on daily basis. Laser-based OWC networks can provide terabits per second (Tbps) aggregate data rates. However, the emerging OWC networks require clusters of optical transmitters to provide uniform coverage for multiple users. In this context, multi-user interference (MUI) is a crucial issue that must be managed efficiently to provide high spectral efficiency. Rate splitting (RS) is proposed as a transmission scheme to serve multiple users simultaneously by splitting the message of a given user into common and private messages, and then, each user decodes the desired message following a certain procedure. In radio frequency (RF) networks, RS provides higher spectral efficiency compared with orthogonal and non-orthogonal transmission schemes. Considering the high density of OWC networks, the performance of RS is limited by the cost of providing channel state information (CSI) at transmitters and by the noise resulting from interference cancellation. In this work, a user-grouping algorithm is proposed and used to form multiple groups, each group contains users spatially clustered. Then, an outer precoder is designed to manage inter-group interference following the methodology of blind interference alignment (BIA), which reduces the requirements of CSI at RF or optical transmitters. For intra-group interference, RS is applied within each group where the users belonging to a given group receive a unique common message on which their private messages are superimposed. Furthermore, an optimization problem is formulated to allocate the power among the private messages intended to all users such that the sum rate of the network is maximized.

eess.SP↗

arXiv2022

Energy Efficient UAV-Based Service Offloading over Cloud-Fog Architectures

Unmanned Aerial Vehicles (UAVs) are poised to play a central role in revolutionizing future services offered by the envisioned smart cities, thanks to their agility, flexibility, and cost-efficiency. UAVs are being widely deployed in different verticals including surveillance, search and rescue missions, delivery of items, and as an infrastructure for aerial communications in future wireless networks. UAVs can be used to survey target locations, collect raw data from the ground (i.e., video streams), generate computing task(s) and offload it to the available servers for processing. In this work, we formulate a multi-objective optimization framework for both the network resource allocation and the UAV trajectory planning problem using Mixed Integer Linear Programming (MILP) optimization model. In consideration of the different stake holders that may exist in a Cloud-Fog environment, we minimize the sum of a weighted objective function, which allows network operators to tune the weights to emphasize/de-emphasize different cost functions such as the end-to-end network power consumption (EENPC), processing power consumption (PPC), UAVs total flight distance (UAVTFD), and UAVs total power consumption (UAVTPC). Our optimization models and results enable the optimum offloading decisions to be made under different constraints relating to EENPC, PPC, UAVTFD and UAVTPC which we explore in detail. For example, when the UAVs propulsion efficiency (UPE) is at its worst (10% considered), offloading via the macro base station is the best choice and a maximum power saving of 34% can be achieved. Extensive studies on the UAVs coverage path planning (CPP) and computation offloading have been conducted, but none has tackled the issue in a practical Cloud-Fog architecture in which access, metro and core layers are considered in the service offloading in a distributed architecture like the Cloud-Fog.

cs.NI↗

arXiv2022

High-Speed Imaging Receiver Design for 6G Optical Wireless Communications: A Rate-FOV Trade-Off

The design of a compact high-speed and wide field of view (FOV) receiver is challenging due to the presence of two well-known trade-offs. The first one is the area-bandwidth trade-off of photodetectors (PDs) and the second one is the gain-FOV trade-off due to the use of optics. The combined effects of these two trade-offs imply that the achievable data rate of an imaging optical receiver is limited by its FOV, i.e., a rate-FOV trade-off. To control the area-bandwidth trade-off, an array of small PDs can be used instead of a single PD. Moreover, in practice, a large-area lens is required to ensure sufficient power collection, which in turn limits the receiver FOV (i.e., gain-FOV trade-off). We propose an imaging receiver design in the form of an array of arrays. To achieve a reasonable receiver FOV, we use individual focusing lens for each PD array rather than a single collection lens for the whole receiver. The proposed array of arrays structure provides an effective method to control both gain-FOV trade-off (via an array of lenses) and area-bandwidth trade-off (via arrays of PDs). We first derive a tractable analytical model for the SNR of an array of PDs where the maximum ratio combining has been employed. Then, we extend the model for the proposed array of arrays structure and the accuracy of the analytical model is verified based on several Optic Studio-based simulations. Next, we formulate an optimization problem to maximize the achievable data rate of the imaging receiver subject to a minimum required FOV. The optimization problem is solved for two commonly used modulation techniques, namely, OOK and direct current biased optical orthogonal frequency division multiplexing with variable rate quadrature amplitude modulation. It is demonstrated that a data rate of ~ 24 Gbps with a FOV of 15 is achievable using OOK with a total receiver size of 2 cm by 2 cm.

cs.IT↗

arXiv2022

A Tb/s Indoor MIMO Optical Wireless Backhaul System Using VCSEL Arrays

In this paper, the design of a multiple-input multiple-output (MIMO) optical wireless communication (OWC) link based on vertical cavity surface emitting laser (VCSEL) arrays is systematically carried out with the aim to support data rates in excess of 1 Tb/s for the backhaul of sixth generation (6G) indoor wireless networks. The proposed design combines direct current optical orthogonal frequency division multiplexing (DCO-OFDM) and a spatial multiplexing MIMO architecture. For such an ultra-high-speed line-of-sight (LOS) OWC link with low divergence laser beams, maintaining alignment is of high importance. In this paper, two types of misalignment error between the transmitter and receiver are distinguished, namely, radial displacement error and orientation angle error, and they are thoroughly modeled in a unified analytical framework assuming Gaussian laser beams, resulting in a generalized misalignment model (GMM). The derived GMM is then extended to MIMO arrays and the performance of the MIMO-OFDM OWC system is analyzed in terms of the aggregate data rate. Novel insights are provided into the system performance based on computer simulations by studying various influential factors such as beam waist, array configuration and different misalignment errors, which can be used as guidelines for designing short range Tb/s MIMO OWC systems.

cs.IT↗

arXiv2022

Energy Efficient VM Placement in a Heterogeneous Fog Computing Architecture

Recent years have witnessed a remarkable development in communication and computing systems, mainly driven by the increasing demands of data and processing intensive applications such as virtual reality, M2M, connected vehicles, IoT services, to name a few. Massive amounts of data will be collected by various mobile and fixed terminals that will need to be processed in order to extract knowledge from the data. Traditionally, a centralized approach is taken for processing the collected data using large data centers connected to a core network. However, due to the scale of the Internet-connected things, transporting raw data all the way to the core network is costly in terms of the power consumption, delay, and privacy. This has compelled researchers to propose different decentralized computing paradigms such as fog computing to process collected data at the network edge close to the terminals and users. In this paper, we study, in a Passive Optical Network (PON)-based collaborative-fog computing system, the impact of the heterogeneity of the fog units capacity and energy-efficiency on the overall energy-efficiency of the fog system. We optimized the virtual machine (VM) placement in this fog system with three fog cells and formulated the problem as a mixed integer linear programming (MILP) optimization model with the objective of minimizing the networking and processing power consumption of the fog system. The results indicate that in our proposed architecture, the processing power consumption is the crucial element to achieve energy efficient VMs placement.

cs.NI↗

arXiv2022

Energy Efficient Placement of ML-Based Services in IoT Networks

The Internet of Things (IoT) is gaining momentum in its quest to bridge the gap between the physical and the digital world. The main goal of the IoT is the creation of smart environments and self-aware things that help to facilitate a variety of services such as smart transport, climate monitoring, e-health, etc. Huge volumes of data are expected to be collected by the connected sensors/things, which in traditional cases are processed centrally by large data centers in the core network that will inevitably lead to excessive transportation power consumption as well as added latency overheads. Instead, fog computing has been proposed by researchers from industry and academia to extend the capability of the cloud right to the point where the data is collected at the sensing layer. This way, primitive tasks that can be hosted in IoT sensors do not need to be sent all the way to the cloud for processing. In this paper we propose energy efficient embedding of machine learning (ML) models over a cloud-fog network using a Mixed Integer Linear Programming (MILP) optimization model. We exploit virtualization in our framework to provide service abstraction of Deep Neural Networks (DNN) layers that can be composed into a set of VMs interconnected by virtual links. We constrain the number of VMs that can be processed at the IoT layer and study the impact on the performance of the cloud fog approach.

eess.SY↗

arXiv2022

Energy-Efficient VM Placement in PON-based Data Center Architectures with Cascaded AWGRs

Data centers based on Passive Optical Networks (PONs) can offer scalability, low cost and high energy-efficiency. Application in data centers can use Virtual Machines (VMs) to provide efficient utilization of the physical resources. This paper investigates the impact of VM placement on the energyefficiency in a PON-based data center architecture that utilizes cascaded Arrayed Waveguide Grating Routers (AWGRs). In this paper, we develop a Mixed Integer Linear Programming (MILP) optimization model to optimize the VM placement in the proposed PON-based data center architecture. This optimization aims to minimize the power consumption of the networking and computing by placing the VMs and their demands in the optimum number of resources (i.e., servers and networking devices) in the data center. We first minimize the processing power consumption only and then we minimize the processing and networking power consumption. The results show that a reduction in the networking power consumption by up to 75% is achieved when performing joint minimization of processing and networking power consumption compared to considering the minimization of the processing power consumption only.

cs.NI↗